Risk Analysis Commons^™

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Modeling Psychological And Demographic Predictors Of Analog Astronaut Mission Participation, Christian Yeara Herrero, Frányerson R. López Ochoa, Mackenzie Thomas, Phoebe Fleshman

Student Research Symposium (SRS)

As plans accelerate to send humans into orbit and to other celestial bodies, whether to lunar outposts, Mars bases, or commercial space stations, it becomes increasingly important to understand how to maintain healthy, cohesive, and productive crews in confined, isolated environments. A practical way to study human adaptation to these conditions is through analog astronaut missions on Earth. Although imperfect, these facilities provide the closest Earth-based simulation of space mission conditions. Currently, over ten analog research centers are operating worldwide, including NASA’s Human Exploration Research Analog (HERA) and the Crew Health and Performance Exploration Analog (CHAPEA) habitats. Selecting and recruiting …

Modeling Individual Self-Protective Behavior During Epidemics, Geonsik Yu, Michael J. Garee, Mario Ventresca, Yuehwern Yih

Faculty Publications

Protecting public health from infectious diseases requires collective action, as individual behaviors—such as vaccination and mask-wearing—directly influence disease dynamics. During the COVID-19 pandemic, unexpected public responses often undermined the effectiveness of interventions, highlighting the need to understand collective behavioral patterns and motivations to design more effective mitigation strategies. This study presents an agent-based simulation model that captures how individuals adjust self-protective behaviors based on evolving opinions about disease risk and examines how these decisions interact with external factors, such as public health interventions, to shape collective outcomes. To improve the representativeness of the simulated population, multiple datasets were integrated to …

An Evaluation Of Leading Indicators In The Construction Industry And Their Relationship With Incident Rates, Kitti Miller Whalen

All-Inclusive List of Electronic Theses and Dissertations

Improving safety programs has been a focus of organizations for decades. Historically, focus has been directed towards lagging indicators such as recordable incident rates and experience modification rate (EMR). While these remain beneficial, they are only one component of the broader framework. In recent years, companies have started to examine what occurs prior to an incident, which are known as leading indicators. The research into leading indicators is promising, however research into the area is limited. The focus of this study is to identify which leading indicators are most strongly associated with improved incident rates in the construction industry specifically. …

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Proactive Safety Reasoning In Human-Robot Collaboration In Disassembly Through Llm-Augmented Stpa And Fmea, Morteza Jalali Alenjareghi, Fardin Ghorbani, Samira Keivanpour, Yuvin Adnarain Chinniah, Sabrina Jocelyn

Études primaires

Disassembly tasks in human–robot collaboration (HRC) environments present safety challenges due to hazardous materials, control system variability, and physically demanding operator tasks. To address these challenges, we propose an AI-augmented risk assessment framework integrating System-Theoretic Process Analysis (STPA) and Failure Mode and Effects Analysis (FMEA). This framework is implemented in four configurations: Term Frequency– Inverse Document Frequency (TF-IDF), Fine-tuned Large Language Models (LLMs), Retrieval-Augmented Generation (RAG), and RAG with a structured Knowledge Graph (KG) built from safety standards. The system supports real-time, standards-compliant safety reasoning by generating interpretable, context-specific recommendations. We evaluate these configurations across GPT-3.5 TURBO, GPT-4o, GPT-4.1, and …

Health Risk Assessment (Hra) In Home-Based Ironing Businesses: Risk Identification, Intervention, And Evaluation In Johar Baru District, Central Jakarta, Heru Alfares, Irawadi Darmaputra, Marsen Isbayuputra, Muhammad Ilyas

Occupational and Environmental Medicine Journal of Indonesia

Background Home-based ironing businesses in Johar Baru District, Central Jakarta, are part of the informal sector, vulnerable to health risks due to suboptimal working conditions. This study aims to identify, assess, and control health risks through a Health Risk Assessment (HRA) approach.

Methods Research methods include direct observation, interviews, environmental measurements, health screenings, and ergonomic surveys using the BRIEF (Baseline Risk Identification of Ergonomic Factor) instrument.

Results The results indicate that the temperature in the ironing area reaches 33°C, exceeding the comfort standard, and that 80% of workers have dark yellow urine, indicating a high risk of dehydration. Risk assessment …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

The Road To Regulation: A Literature Review Of The Influences On The Updated Silica Standards, Skye M. Medcraft

Capstone Experience: Master of Public Health

Silica is a hazardous compound that poses a risk to human health resulting from dust creating activities across various industries. Several agencies, including OSHA (Occupational Health and Safety Administration) and MSHA (Mine Safety and Health Administration) have adopted regulatory oversight of silica exposure in the workplace. As more research has been conducted on silica exposure, the health effects are becoming better described, which has led to the creation and updating of exposure regulations to protect worker health. The objective of this literature study is to review the data presented to the Department of Labor and discuss how the factors that …

A Human Factors Analysis And Classification System (Hfacs) Approach To Compare Cardiovascular, Orthopedics, Trauma Care, And Neurosurgery, Asfandyar Khan

Doctoral Dissertations and Master's Theses

Background: Despite significant progress in patient safety, human error continues to occur at high rates in procedural settings. Traditional safety models tend to focus on retrospective incident analysis, often overlooking the systemic conditions that allow errors to occur. The Human Factors Analysis and Classification System (HFACS) offers a proactive lens to understand how and where errors emerge and is useful for identifying active and latent failures.

Objective: To evaluate the utility and reliability of the Human Factors Analysis and Classification System (HFACS) in categorizing and comparing the pattern of frequencies (events) in cardiovascular, orthopedic, trauma care, and neurosurgical procedure.

Design, …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Toward The Application Of Natural Language Processing In Electronic Health Record Analysis For Taxonomy Development, Latoya Mcdonald

All Dissertations

Electronic health records (EHRs) are pivotal resources for nurse practice because they increase the timeliness and reliability of patient information at the point of care and support access by multiple healthcare providers and the individual patients themselves. However, it is widely recognized that data extraction from EHRs is challenging due to the variability in the language used in clinical care notes and the lack of standardized terminology across healthcare systems. The broad objective of this dissertation is to develop taxonomy-based classification models for nursing care by applying feature engineering approaches to EHRs that include nursing care of ostomy patients following …

Adaptation For Whom? Understanding The Impacts Of Dyke Policies On Small-Scale Farmers In Ca Mau Province Of Vietnam, Nguyen Minh Quang, Nguyen Van Minh, Nguyen Vo Chau Ngan, Martha B. Lerski

Publications and Research

Low-lying deltas worldwide are extremely vulnerable to sea-level rise. As the risks of climate-induced flooding become increasingly clear, the thirst for infrastructure-driven adaptation increases. This highlights a patent need to understand the impacts of engineering adaptation solutions, especially those targeting built structures such as dykes and sluices, on farmers from a bottom-up, farmer-centred perspective. The study addresses this call by examining cases where dyke policies, while successful in some dimensions, have undermined small-scale farmer livelihoods in Ca Mau ― Vietnam’s southernmost rural province. It identifies areas in need of attention and adds empirical data related to this group of farmers. …

Confronting Indecision, Lane Allison Murray

ENGS 15.11: Design and Education

This course aims to increase students' understanding of indecision and how to confront it. The class provides insight into how the fear of the unknown holds people back from making decisions and about understanding one's values as a means to combat indecision. Students and teachers alike explore instances of indecision and evaluate their own impulses & thought processes by reflecting on the deeper reasons for their choices. Students will increase their comfort level of asking themselves and their peers questions about the values that guide them and, in doing so, strengthen their relationships with themselves and others.

Sex-Dependent Changes In Risk-Taking Predisposition Of Rats Following Space Radiation Exposure, Elliot Smits, Faith E. Reid, Ella N. Tamgue, Paola Alvarado Arriaga, Charles Nguyen, Richard A. Britten

Department Radiation Oncology & Biophysics Faculty Publications

The Artemis missions will establish a sustainable human presence on the Moon, serving as a crucial steppingstone for future Mars exploration. Astronauts on these ambitious missions will have to successfully complete complex tasks, which will frequently involve rapid and effective decision making under unfamiliar or high-pressure conditions. Exposure to low doses of space radiation (SR) can impair key executive functions critical to decision making. This study examined the effects of exposure to 10 cGy of Galactic Cosmic Ray simulated radiation (GCRsim) on decision-making performance in male and female rats with a naturally low predisposition for risk-taking (RTP) prior to exposure. …

A Governance-Centric Framework For Strengthening Healthcare Cybersecurity: A Systems Perspective, Sujatha Alla, Sai Gireesh Komaragiri, Teresa Duvall, Satluk Karahan, Nagesh Bheesetty, Vijay Kumar Chattu

Engineering Management & Systems Engineering Faculty Publications

Healthcare systems face unprecedented security and privacy challenges due to increasing digitization and interconnectedness. This paper provides a comprehensive analysis of these challenges by examining various cyberattacks, defensive mechanisms, and governance frameworks within modern healthcare infrastructure. The research systematically categorizes prevalent security threats, such as ransomware, insider threats, and data breaches, identifying vulnerabilities specific to healthcare systems. Furthermore, the study evaluates current defensive strategies, including encryption techniques, access control systems, and intrusion detection tools, assessing their effectiveness against complex cyber threats. A key focus is placed on governance structures and their role in cybersecurity resilience. The research explores how regulatory …

Llm-Driven Fmea For Safe Human-Robot Collaboration In Disassembly, Morteza Jalali Alenjareghi, Samira Keivanpour, Yuvin Adnarain Chinniah, Sabrina Jocelyn

Articles dans des actes de congrès

Disassembly operations often present unstructured and unpredictable scenarios, such as handling hazardous materials, addressing ergonomic strain, and managing dynamic robot interactions that pose safety risks. To tackle these challenges, we propose an innovative use of large language models (LLMs) to enhance failure mode and effect analysis (FMEA) in the context of human-robot collaboration (HRC) for disassembly tasks. We developed an LLM system leveraging retrieval-augmented generation (RAG) for real-time risk analysis and recommendation generation. RAG retrieves domain-specific information from the FMEA knowledge database, enabling accurate risk analysis, contextual understanding, and relevant recommendations based on user input and operational data. Evaluation of …

Guía Para Planes Escolares De Gestión Del Riesgo De Desastres, Diego Alejandro Mesa Baquero, Dalia Xiomara Suárez Pulido, Luis Miguel Castañeda Galindo, María Paula Gómez Leal, Diana Julieth Garzón Sánchez, Natalia Gómez Díaz

Ciencias Agropecuarias

A través de alianzas y encuentros interinstitucionales con todas las entidades territoriales relacionadas en educación ambiental y vinculando a todos los actores de la comunidad educativa tanto docentes directivos, docentes y estudiantes como organizaciones comunitarias y líderes locales para enriquecer la implementación del Proyecto Ambiental Escolar (PRAE) y los Planes Escolares de Gestión de Riesgo de Desastres (PEGR) de los respectivos establecimientos educativos. Esta guía metodológica establecerá los lineamientos para la formulación de los PEGR que contribuirán a la gestión de sus riesgos en cada una de las instituciones educativas y de sus sedes mediante la implementación de los procesos …

Medical Imaging Dataset Management Leveraging Deep Learning Frameworks In Breast Cancer Screening, Inchan Hwang

Dissertations

In the domain of Computer-Aided Diagnosis (CADx) for breast cancer diagnosis through mammography, prevailing models have traditionally been trained and validated using old film-based mammography. However, contemporary U.S. hospital practices involve the utilization of Full Field Digital Mammography (FFDM), offering more detailed images captured at various angles than old film-scanned mammography. Despite this shift, the existing body of research predominantly focuses on old-film based datasets, the implications of FFDM for CADx systems have not been understood. This dissertation addresses the issues emerged from FFDM such as data augmentation between old film-based set and new FFDM whether they are more effective …

Predicting Hospitalization Risk Of Schizophrenia Patients In Missouri, Arun Kumar

Theses

Understanding the factors that contribute to the risk of hospitalization among individuals with schizophrenia is crucial for optimizing treatment strategies and improving patient outcomes. In this study, we used recent Medicaid adminis trative claims data in Missouri (from 2016 to 2019) and predicted the risk of hospitalization of patients diagnosed with Schizophrenia (N=143446). We ana lyzed the association between previous hospitalizations and the likelihood of future hospitalizations. We developed machine learning techniques, including logistic re gression and decision tree classifiers, to predict the risk of hospitalization based on demographic factors, clinical variables, and historical hospitalization records. Our findings reveal that …