Other Engineering Commons^™

Generative Data Augmentation: Using Dcgan To Expand Training Datasets For Chest X-Ray Pneumonia Detection, Ryan D. Maier

Master's Theses

Recent advancements in computer vision have demonstrated remarkable success in image classification tasks, particularly when provided with an ample supply of accurately labeled images for training. These techniques have also exhibited significant potential in revolutionizing computer-aided medical diagnosis by enabling the segmentation and classification of medical images, leveraging Convolutional Neural Networks (CNNs) and similar models. However, the integration of such technologies into clinical practice faces notable challenges. Chief among these is the obstacle of acquiring high-quality medical imaging data for training purposes. Patient privacy concerns often hinder researchers from accessing large datasets, while less common medical conditions pose additional hurdles …

Impact Force Helmet Device For Concussion Monitoring, Patrice Mulligan, Karina Mealey, Zack Borthwick, Benjamin Fick

General Engineering

To track head trauma in football, our device is placed inside a football helmet to measure both linear and gyroscopic (rotational) accelerations. These measurements are taken using an ADXL375 linear accelerometer and an LSM6DSOX accelerometer and gyroscope. The data from these sensors is processed and transmitted wirelessly by a SparkFun Thing Plus microcontroller to another SparkFun Thing Plus microcontroller connected to a laptop on the sidelines. Our program on the laptop stores the acceleration impact data into a .csv file for each player. If a likely concussive impact is detected, the program displays a popup warning. Testing results were promising …

Two-Story Dod Office Building, Jacob Ost

Fire Protection Engineering: Culminating Experience Project Reports

This report is a comprehensive analysis of the fire protection and life safety components for an administrative office building designed for the Department of Defense. The owner of the facility has requested that all identifying information, including name and location, not be included in this report and has since been removed from the documents.

The building was designed in 2019 and is currently under construction. The building is two stories with a total area of approximately 125,000 square feet. The building is primarily used as office space for administrative personnel and consists of open and single-user office space, conference rooms, …

Student Center Building, Mark Slonina

Fire Protection Engineering: Culminating Experience Project Reports

The new Student Center (SC) is planned as a 140,000 GSF four (4) story building with a basement. The program for the building includes classrooms, an auditorium, fabrication & assembly, glass blowing, student organizations that build & test vehicles, meeting rooms, demonstration kitchen, café, retail, and a lounge. An exterior courtyard is planned on Level 2 which allows for outdoor assembly spaces.

This report identifies major code requirements for means of egress, structural fire protection, fire suppression, and fire alarm systems. The report also identifies the major fuel loads in the building. A performance-based assessment is provided for roof construction …

The Pressure Distribution Of Rotating Cylinders Using An Onboard Wireless Data Acquisition System, Nathan Eller

Master's Theses

This thesis presents a novel, cost-effective method for mapping the pressure distribution on a rotating cylinder in cross flow, a phenomenon central to the Magnus effect. Utilizing commercial-off-the-shelf (COTS) micro-electromechanical system (MEMS) pressure sensors, a high-resolution data acquisition system was developed and integrated into a rotating cylinder model. Compared to traditional approaches, such as slip rings or one-off designs, this method proved significantly cheaper and faster while achieving comparable or superior resolution. The experimental setup, including a modified continuous rotation technique and adaptable model design, facilitated rapid testing across a broad range of Reynolds numbers and reduced frequencies, exceeding the …

Design Of An Integrated System For The Protection Of Patient Health Information In Medical Images, Manikandan V

Theses and Dissertations

Electronic clinical data such as Patient Health Information (PHI) is stored by adapting the Digital Imaging and Communications in Medicine (DICOM) standard to build an integrated healthcare system where medical images from various sources can be interlinked. The healthcare industry poses a threat from hackers, and the information fetched by hackers provides more money than the other information stolen. This thesis deals with designing and analysing encryption algorithms, key generation mechanisms, and information-hiding schemes for protecting PHI.

Sensitive multimedia information of all forms is encrypted, with a key, before storage and transmission to protect it from illegal use and manipulation …

Demand Response And Peer-To-Peer Energy Trading For Residential Microgrid, Kanakadhurga D

Theses and Dissertations

Demand Side Management (DSM) is vital in handling uncertain renewable power generation and demand in a deregulated power system. The flat load profile can be obtained using the Demand Response (DR) techniques with the storage elements and proper switching. The increasing penetration of renewable-based distributed generation (DGs), batteries, and electric vehicles (EVs) supports the DR measures that facilitate utility and consumer.

This research aims to minimize the peak demand, electricity cost, and emission rate by effectively utilizing the storage with Renewable Energy Sources (RES). The first specific aim of the research objective focuses on the impact of DR implementation, DGs …

Effects Of Ti Addition On The Characteristics Of Al-10zn-6mg-2si/Zro2 Composites Produced By Squeeze Casting, Qesha Diva Prameshvara, Pipin Indah Lestari, Bondan Tiara Sofyan

Journal of Materials Exploration and Findings

Metal matrix composite (MMC) with 7xxx aluminum matrix is potential for ballistic applications due to the combination of strength, toughness, and light weight. Previous study successfully produced aluminum-based composites with SiC particles which were able to stop type III bullet, however cracks remained on back of the plate. Therefore, in this research, SiC was replaced by zirconia (ZrO₂) due to its high fracture toughness. Ti-B grain refiner was added to further improve toughness through grain boundary strengthening mechanism. This research developed 5 vol.% ZrO₂ strengthened Al-10Zn-6Mg-2Si composite with addition of Al-5Ti-1B grain refiner produced through squeeze casting …

Integration Of The Ashby Technique And Pahl-Beitz Quantitative Ranking For Railway Axle Material Selection, Helya Chafshoh Nafisah, Jaka Fajar Fatriansyah, Siti Norasmah Surip

Journal of Materials Exploration and Findings

Railway axle serves as a vital connection between the train's wheels and its body. However, cyclic loading and high speed can induce fatigue in railway axle, which potentially leads to damage human safety. Therefore, it is important to find materials that have good mechanical properties with the lowest weight and cost. In this paper, a comprehensive method using Ashby chart has been performed to select candidate materials of railway axle. The methods begin with analyzing function by determining the problem, objective function, and constraints. After that, the results obtained are ranked using Pahl and Beitz quantitative weighting method. The results …

Analysis Of The Effect Of Different Surface Preparation Methods On Corrosion Resistance And Adhesion Strength Of Astm A36 Steel Substrate With Surface Tolerant Epoxy Paint As Coating Material, Irwan Wijaya Santoso, Daffa Aqila, Rini Riastuti, Rizal Tresna Ramadhani

Journal of Materials Exploration and Findings

In the industrial world, to extend the service life of materials, protection methods are carried out to slow down the material's corrosion rate. The protection method that is often used is the coating method. The coating method is a protection method by coating the substrate material using a coating material to prevent contact between the substrate material and the environment. In this research, the substrate material used is ASTM A36 steel and the coating material used is Surface Tolerant Epoxy paint. The independent variable used in this study lies in the surface preparation method which consists of: solvent cleaning, hand …

Fitness For Service (Ffs) And Fatigue Assessment For Shell Distorted Steel Storage Tank Based On Api 579-1/Asme Ffs-1, Wira Herucakra Sr. Structure Engineer, Luh Putri Adnyani, Ic Farid Hadi Prasetyo, Alviani Rahma Rizkhita

Journal of Materials Exploration and Findings

A shell distortion was occurred due to incorrect in the welding procedure during construction of a new built above ground steel storage tank. The assessment level 1 then performed referred to original construction code of API Standard 650 was performed, the roundness data of tank plate was obtained through to laser scanning survey, and the result on assessment level 1 known that the minimum radius of measured point is exceeding the radius tolerance. This unacceptable condition of assessment level 1 requires to be performed the higher level of assessment. A fitness for service assessment level 3 for tank 1000 KL …

Neuro-Symbolic Commonsense Reasoning With Resistance To Data Poisoning: A First-Order Logic And Sub-Symbolic Embeddings Framework, Bryce Shurts, King-Ip Lin

Computer Science and Engineering Theses and Dissertations

Commonsense reasoning has long presented a hurdle between conversational agents and their ability to naturally engage with humans in conversation, as the infinitely dimensional nature of a dialogue’s topics presents a significant reasoning challenge in the study of Natural Language Understanding (NLU). Such a system must conceivably be able to act as a generalizable system for evaluating and reasoning about commonsense statements, problems, and queries: in this way, the agent can attempt to quantify the reasonability of a given input. We attempt to address this through the integration of an explainable neuro-symbolic system that leverages Logical Tensor Networks (LTNs) and …

An Overview Of The Product Development Process For A Lounging Grove Chair: The Rebel Lounge, Gracey Massengill

Honors Theses

This report focuses on the process of completing my senior capstone project for the Center for Manufacturing Excellence with my teammates, Andrew Brady, Carter Doss, Brooke Grissinger, and Karson Wardell. It explains the development, design and manufacturing of the Rebel Lounge Chair, a comfortable, portable and versatile chair made with the University of Mississippi Grove in mind and the prospective customers that would purchase such a chair. The report describes the phases of brainstorming, market research, prototyping, manufacturing process development, and accounting analysis that the Rebel Lounge capstone team went through to create their product.

Due to out-of-the-box brainstorming and …

Signal Processing Algorithms For Doppler Lidar Sensors, Samantha Grubb

Physics and Astronomy Honors Papers

Light detection and ranging (LiDAR) is a remote sensing technology that obtains relative distance and velocity measurements between a sensor and a defined target by using light transmitted and received from the target. FMCW Doppler LiDAR, a particular variant of LiDAR, functions by analyzing the frequency shift in the reflected light to determine the target's range and velocity. This technology plays a crucial role across various sectors including defense, aerospace, and automotive. This paper presents signal processing algorithms designed to optimize data obtained from Doppler LiDAR sensors. By applying various window functions to time domain data, the Signal-to-Noise Ratio (SNR) …

Cignn: Community-Induced Graph Neural Networks, Shi Yin Hong

Computer Science and Computer Engineering Undergraduate Honors Theses

Message-passing graph neural networks (MPGNNs) are known to have limitations in their representational power. Recent work proposes subgraph graph neural network (subgraph GNN) models to address these limitations by upgrading the local node representations of MPGNNs to respective subgraph representations. However, existing subgraph GNN models have limited interpretability in capturing inherent local structural dynamics across diverse graph structures. In this work, we present a novel subgraph GNNs framework, termed Community-Induced Graph Neural Network (CiGNN). The key idea of CiGNN is to endow an intuitive interpretability basis for subgraph GNNs by capturing the dynamics of inherent structural community topology in subgraph …

High-Altitude Ballooning And Payload Design, Matthew Smith

Honors College Theses

The Icarus project began in 2017 where a team performs high-altitude balloon (HAB) launches to conduct atmospheric and payload design research. The project involves sending a data-collecting payload containing recording equipment to high altitudes (~100,000 feet). This paper outlines the Icarus project as well as the efforts to design a payload that will remain stable throughout flight while also protecting the equipment housed within the payload shell. SOLIDWORKS computer-aided design (CAD) software was used to design a unique payload system. The payload parts were manufactured with PLA filament using a Prusa MK4 3D printer. The secondary goal of this thesis …

Innovative Rate Design As A Free Market Solution To Climate, Resiliency, And Economic Challenges, Brendan J. Moore

LSU New Orleans Theses and Dissertations

A century-old problem of electricity rate design is cost-shifting between ratepayers (Wellinghoff, J. & Tong, J., 2015). A much newer cost-shifting example of great and increasing importance happens whenever ratepayer generated “renewable energy” is sold to the grid—all too often, this is accused of being unfairly rewarded (Ritchie, 2016). ProRate resolves both these concerns and ProRate can actually be derived simply from the premise of avoiding “all” cost shifts between ratepayers (Katz, CLEPm Rewards to Arrest Demand Cost-Shifting, 2019; Katz, CLEP5 Rewards to Arrest Energy Cost-Shifting, 2019). Another major problem with the Old Utility Model is the lack of price …

Meta Project: Construction, Validation, And Flight Testing Of A New Meta Aircraft Design, William Andrew Wearren

Honors Theses

Meta aircraft are a type of aircraft that can connect via wingtip, nose-to-tail, or both wingtip and nose-to-tail in order to create a lattice of aircraft that can fly together to a site, detach, survey different areas, and then reattach for flight back to the main base. The project started at the Georgia Institute of Technology with Dr. Carlos Montalvo and is being continued at the University of South Alabama Facility for Aerospace Systems and Technology Lab. This paper seeks to theoretically verify the new aircraft design for the META project, complete the development of the design, and to experimentally …

Explainable Machine Learning For The Regulatory Environment: A Case Study In Micro-Droplet Printing, Elaine Harris, Darragh F. Ryan, Gerard M. O'Connor

Articles

Micro-droplet printing remains an invaluable tool for the additive manufacturing industry due to its versatility, efficiency and cost-effectiveness. The design and deployment of a disposable micro-droplet dispenser seeks to facilitate a quick and easy way to alternate between different printing materials (such as ink, metals, bio-materials, pharmaceuticals, etc.) without the need for thorough cleaning or separate delivery systems. While this works well in principle, in practice achieving consistent performance between dispensers can prove challenging. This paper aims to tackle this issue through the use of Machine Learning (ML) in order to (1) build a model that predicts dispenser performance from …

Orms And Database Design, Kalim Dumas

Honors Program: Senior Projects (Public)

This thesis explores the relationship between database design and Object-Relational Mapping (ORM) design, investigating how they have evolved together and influenced each other. It addresses a theoretical discussion, a practical implementation, and some observations regarding integrating an ORM into my Senior Design project. My Senior Design project was originally built without the intention of implementing an ORM.

There are a lot of complicated discrepancies between Relational Databases (RDBs) and Object-Oriented Programming Languages (OOPLs), called the Impedance Mismatch Problem. The fact that they are both foundational pillars in software engineering means that one cannot simply change to match the other. ORMs …

Amazon Fba Vs Fbm; A Strategic Approach To Determine Which Method Can Effectively Utilize Project Management Principles To Enhance Your Success As A New Amazon Seller., Tiffany Renee White

Theses and Dissertations

Navigating the complexities of a platform such as Amazon demands a strategic approach guided by project management principles. A comparative analysis of Fulfillment by Amazon (FBA) and Fulfillment by Merchant (FBM) methods were completed by focusing on how project management principles optimize product acquisition, supply chain management, and shipping methods for Amazon sellers. The objectives of this study included the identification of top product acquisition tools, the evaluation of inventory management software, assessing shipping methods, and determining the most effective fulfillment process for Amazon seller success. A mixed-methods approach was applied, involving an Amazon seller survey, literature review, data analysis, …

Geomagnetic Substorms Prediction Model Using Combined Physics-Based And Deep Learning Modeling Techniques, Ruthba Yasmin

Graduate Theses and Dissertations (2019 - present)

This thesis aims to develop a hybrid physics-incorporated neural network model (PINN) for classifying geomangnetic substorms in Earth's Magnetosphere. The model is trained using a comprehensive list of substorm onsets, ground magentometer data from a global network, and solar wind parameters from the Advanced Composition Explorer (ACE) satellite. Two different neural network architectures are used, and the physics model used for training is called WINDMI. The magnetic field components on the ground, which are a function of the ionospheric currents, are captured by the SML index. The methodology involves using 60-minute data segments preceding an event to train the hybrid …

Investigating Bimanual Haptic Exploration With Arm-Support Exoskeletons, Balagopal Raveendranath

All Dissertations

The ability to judge properties like weight and length of hand-held objects is essential in industrial work. Sometimes workers use devices like exoskeletons, which can augment their ability to lift and move heavy objects. Previous studies have investigated the perceptual information available for one-handed weight and length judgments. The current study investigated how blindfolded participants bimanually heft and wield objects to explore haptic information, to perceive object heaviness or length. The study also investigated the effects of using an arm-support exoskeleton (ASE) on the perceived weight of hand-held objects. We empirically tested whether people wield and manipulate objects differently, depending …

Guidelines For Data Collection On Energy Performance Of Higher-Education Buildings In Egypt: A Case Study, Hesham Safwat, Ahmed A. Abdel-Rehim, Iman El-Mahallawi, Abdelwahab Hussein, Engy Elshazly, Ahmad Elshamy

Mechanical Engineering

Reliable energy analysis of buildings relies heavily on high-quality data leading to proper indicators. Previous studies have highlighted the importance of data quality in analyzing energy usage in residential and non-residential buildings in order to transform declarations to actions, optimise energy efficiency policies and monitor progress and failures in countries. Collected data must adhere to national and international standards for energy performance in buildings. This study aims to provide practical guidelines for effectively collecting and preparing data suitable for evaluating energy performance in Egyptian higher-education (HE) buildings. The guidelines are developed based on a comprehensive case study, considering data availability …

Techno-Economic Analysis Of Solar Pv Systems Under Various Environmental Conditions, Ramkiran B

Theses and Dissertations

World Energy Council has predicted that the global electricity demand will peak in 2030. The need for renewable energy has grown rapidly due to the rising energy demand in this ever-growing population. Green house gas emissions are predominantly due to the energy generation and consumption of fossil fuels. On the other hand, fossil fuels supply nearly 74% of India's energy demand, making India one of the world's largest coal consumers.

According to World Resource Institute, India ranks fourth in the world in terms of carbon emissions. Investments in renewable energy sources and energy-saving technologies should be part of a solution …

A Case Study Of The Crashoverride Malware, Its Effects And Possible Countermeasures, Samuel Rector

Cybersecurity Undergraduate Research Showcase

CRASHOVERRIDE is a modular malware tailor-made for electric grid Industrial Control System (ICS) equipment and was deployed by a group named ELECTRUM in a Ukrainian substation. The malware would launch a protocol exploit to flip breakers and would then wipe the system of ICS files. Finally, it would execute a Denial Of Service (DOS) attack on protective relays. In effect, months of damage and thousands out of power. However, due to oversights the malware only caused a brief power outage. Though the implications of the malware are cause for researching and implementing countermeasures against others to come. The CISA recommends …

Immersive Japanese Language Learning Web Application Using Spaced Repetition, Active Recall, And An Artificial Intelligent Conversational Chat Agent Both In Voice And In Text, Marc Butler

MS in Computer Science Project Reports

In the last two decades various human language learning applications, spaced repetition software, online dictionaries, and artificial intelligent chat agents have been developed. However, there is no solution to cohesively combine these technologies into a comprehensive language learning application including skills such as speaking, typing, listening, and reading. Our contribution is to provide an immersive language learning web application to the end user which combines spaced repetition, a study technique used to review information at systematic intervals, and active recall, the process of purposely retrieving information from memory during a review session, with an artificial intelligent conversational chat agent both …

Wrack Lines Volume 24, Number 1, Spring/Summer 2024, Gract Cajski, Paul Choiniere, Maggie Cozens, Owen Placido, Judy Benson

Wrack Lines

"Natural Effects: Tales of Our Dynamic Environment" is the theme of this issue, with articles about a research project using GoPro cameras on oyster cages; the exploding population of black sea bass in Long Island Sound; three research projects in Connecticut salt marshes; a children's book illustrator and author and her book about kelp farming; and a living shoreline project in Old Saybrook, CT.

Diagnosing Discharge Events Within A Novel Miniature Simplified Coaxial Ion Trap Mass Analyzer, David Virgil Sirbescu-Stanley

Masters Theses

Mass spectrometry is a technique that organizes material samples by mass to reveal their chemical composition by forming a spectrum. Since their invention, ion trap mass spectrometers have undergone significant enhancements. This work, funded by the National Science Foundation and in collaboration with Brigham Young University, the Simplified Coaxial Ion Trap (SCIT), attempts to simplify ion trap geometry and combine three ion traps into one device. Successful demonstration of the SCIT functionality could reduce costs, reduce manufacturing complexity, and shrink total instrument volume. At the same time, trapping capacity and analytical efficiency will be increased. However, as discussed within, challenges …

An Evaluation Of The Equitable Practices For Stem Education To Prepare All Students For The 21st Century, Elizabeth Simpson

Dissertations

We are almost a quarter of the way through the 21st Century, yet most education institutions do not provide STEM education for all students. Science, technology, engineering, and math (STEM) have been a special focus of both industry and federal education initiatives in recent years. STEM is a proven way of building student skills needed for the workforce of tomorrow. The purpose of this study is to determine why education decision-makers resist implementing STEM programs equitably for all students. The context of this inquiry is district and school-based leaders throughout the United States, from elementary to high school, who have …