Other Engineering Commons^™

A Bridged Cybersecurity Curriculum With Embedded Stackable Credentials, Fitratullah Khan, Ala Qubbaj, Laura Saenz, Liyu Zhang

Informatics and Engineering Systems Faculty Publications

Supported by a federal grant, The University of Texas Rio Grande Valley (UTRGV) streamlined the Bachelor of Science in Cyber Security (BSCS) and Master of Science in Informatics (MSIN) whereby each degree is broken down into embedded stackable credentials, with a fast-track 4+1 option for students to complete both degrees in 5 years. This paper provides a blueprint of the bridged undergraduate and graduate curriculum integrated to provide embedded stackable credentials with fast-track 4+1 option bridging the two degrees. Most of the major-core of BSCS is divided into three embedded stackable credentials, namely, Cyber Security Basics Certificate, Cyber Security Systems …

Gold(I)-Hydroarylation In Polymer Modification – Alkynes And Alkenes With Unexpected Reactivity, Samuel B. Hunt

Dissertations

Polymer modification is crucial for developing new properties and materials from recalcitrant waste polymers. Synthetically, polymers possess a chemical inertness that renders their functionalization challenging. Specifically, the omnipresence of C–H bonds in all commercial polymers endows their chemical resistance. Thus, developments in C–H activation chemistry are crucial to polymer diversification processes and allow for fundamental insight into the role of material processing conditions on novel chemical reactions. Au(I)-chemistry has recently come to the fore owing to a unique chemical reactivity nonexistent with other transition metals. The alkynophilicity of Au(I), in tandem with their insensitivity to common polymer processing conditions (air, …

Toward Low Carbon Footprint And Lightweight Masonry Alkali-Activated Material, Zina Ebrahim, Mohammad Mastali, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

The portland cement concrete industry and the masonry industry are undergoing changes in response to skilled labor shortages and concerns over climate and pollution. There may be interest from parts of the industry in lower carbon footprint and lightweight masonry products. Toward this aim, the use of hemp shiv--the woody core of the hemp plant--in alkali-activated concrete was investigated herein and shown to have a wide range of impacts on the hardened state characteristics of a material suitable for structural concrete masonry units (CMUs) in accordance with ASTM C90 requirements. Hemp shiv is well known for its use in hempcrete, …

Fire Protection And Life Safety Analysis Of The Illinois Department Of Transportation (Idot) District Six Headquarters Building, Karl Mallinger

Fire Protection Engineering: Culminating Experience Project Reports

Enclosed in this report is a comprehensive analysis of the fire protection and life safety components of the Illinois Department of Transportation (IDOT) District Six Headquarters building. The original building was constructed in 1972 and renovation operations were recently completed in 2022. The building is four stories in height with an aggregate floor area of approximately 69,300 square feet. The building functions as an office space for IDOT staff, therefore the majority of floor space is used as open office and private office space. The business spaces are supported by assembly spaces such as conference and break rooms on each …

Building San Francisco, Ca, Kevin Nguyen

Fire Protection Engineering: Culminating Experience Project Reports

The objective of this report is to conduct a thorough analysis and evaluation of the existing fire life safety and fire protection systems in place at the Building located in San Francisco, California. The building is classified as a Type II-A building and serves predominantly as office space. The building is six stories tall with a total gross area of approximately 97,170 SF.

The initial portion of this report concentrates on a thorough prescriptive-based analysis, which provides an evaluation of the egress design, fire alarm system, communication systems, fire suppression system, structural and construction design, smoke control, and flammability requirements. …

Analysis Of Scramento State University Union, Zachary Schuler

Fire Protection Engineering: Culminating Experience Project Reports

Sacramento State Union is a centrally located building with a large occupant load during the school year. This building is a 239,000-square-foot three-story structure built originally back in 1975. This original building was constructed using waffle slab construction. Additions in 1996 and 2016 were built using steel beam and girder construction to meet the total square footage we have today. This mixed-use occupancy is not only a congregation point, but many events are held in this building as well.

In this analysis of the building, fire life safety systems are reviewed and determined if they not only meet the minimum …

University Of Washington Bill & Melinda Gates Center For Computer Science & Engineering, Devin Ide

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this report is to analyze and evaluate the prescriptive and performance-based criteria used to design the fire protection systems installed in the Gates Center for Computer Science and Engineering at the University of Washington, Seattle Campus. The Gates Center is a five-story building housing business and assembly spaces such as classrooms, workrooms, offices, a lecture hall, event center, and a café. The main architectural feature is a central atrium, which connects the ground, first, second, and third floors of the building.

Aspects of the prescriptive-based fire protection design include egress, automatic sprinkler systems, detection and notification devices, …

Fire Protection And Life Safety Analysis Of The 2704-Hv Hanford Building, Guillermo Rodriguez

Fire Protection Engineering: Culminating Experience Project Reports

This report analyzes multiple aspects of fire protection and life safety design for the 2704-HV Building located at the Hanford Nuclear Reservation Site in Washington State. The analysis contained within focuses on both prescriptive and performance-based designs for the fire systems within the structure. The 2704-HV building is a two-story office building containing approximately 90 individual full-office spaces on each floor along with approximately 60 individual cubicle office spaces on each floor. There are various other types of gathering spaces within the 2704-HV layout including: conference rooms, showers, kitchen and dining areas, training rooms, and lobbies.

The 2704-HV building was …

Fire And Life Safety Evaluation Of An Assisted Living And Memory Care Center, Sarah Chandonait

Fire Protection Engineering: Culminating Experience Project Reports

This culminating project has been submitted as part of the graduate program in Fire Protection Engineering at Cal Poly. It documents an Assisted Living and Memory Care Center’s compliance with applicable fire safety prescriptions contained in the 2019 California Building and Fire Codes (CBC and CFC). Performance-based methods incorporating deterministic design fires were then used to verify that the final building design and operating procedures met the life safety needs of its unique occupants.

The building under analysis was a 45,000 sq. ft, two-story, 58-bed residential care facility for the elderly. Occupants were all 60 years or older without acute …

Fire Protection Analysis Of A K-12 Classroom Building, Raymond Yip

Fire Protection Engineering: Culminating Experience Project Reports

The report evaluates the fire protection features of a K-12 classroom building (Bldg. B) in San Bernardino County, California. Bldg. B is a two-story Type V-A light timber frame construction. At the time of this report’s composition, Bldg. B is undergoing modernization construction. The fire protection analysis of this building consists of prescriptive and performance portions.

The prescriptive analysis verifies the compliance of building egress, passive, and active protection features with the 2019 edition of California Codes of Regulations Title 24 (Title 24) and Title 24-adopted National Fire Protection Association (NFPA) standards. The analysis comprises of four sections: egress, structural …

Iris Island Culminating Project Report, Cory Wolf

Fire Protection Engineering: Culminating Experience Project Reports

This report covers an analysis of each component of the fire protection system within the Iris Island building. The Iris Island building contains several unique features such as a three-story monumental stair on Levels 1 through 3. It also contains several mock court rooms and lecture rooms on Levels 2 and 3 as well as a two-story library on Levels 4 and 5. This document begins with a description of the prescriptive requirements for this building as required by the 2018 edition of the International Building Code. Analysis is performed for the egress systems, the fire resistive construction, the fire …

A Fire Protection And Life Safety Analysis Of An Oupatient Healthcare System Building, Conrad Chandler

Fire Protection Engineering: Culminating Experience Project Reports

The subject building of the report is an outpatient healthcare system building that is a two stories in height and 184,670 SF building. This building offers primary, specialty, and mental health outpatient care to patients throughout its state of location.

The facility is a mixed occupancy building with business as the primary occupancy, a surgery suite that classifies as an ambulatory health care occupancy, and assembly uses in the conference rooms, kitchen, and canteen. The Authority Having Jurisdiction (AHJ) has adopted the National Fire Codes (NFC) published by the National Fire Protection Association (NFPA), and throughout this report, the life …

Graphite: Open Source 2d Graphics Editor, Christopher H. Mendoza, Oliver A. Dolan

Computer Science and Software Engineering

Graphite is an open source 2D graphics editor aiming to provide a useful alternative to the Adobe product suite while integrating modern ideas from research and industry, including a node-based procedural approach that makes the design process fully non-destructive. Tools from the VFX and gamedev industry like Nuke, Houdini, and Substance Designer have proven the power and flexibility of node-based systems, but they are each lacking in their user experience because of the deep level of complexity that is not abstracted into simpler concepts for users (Adobe Systems, SideFX, The Foundry Visionmongers Ltd., n.d.). Graphite puts the node-based core into …

Incentivizing Electric Vehicle Adoption Through State And Federal Policies: Reviewing Influential Policies, Joshua Sabata, Subhaditya Shom, Ahmad Almaghrebi, Anne Mccollister, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

All-electric vehicles (EVs), battery-powered EVs (BEVs), and plug-in hybrid EVs (PHEVS) are gaining market share and increasing in popularity with the buying public because the battery range (longer) and cost (lower) have reached sweet spots, the charging infrastructure is more robust, and concern with global cli­mate change is high. In 2013, only 100,000 EVs were sold in the United States, but by 2022, approximately 800,000 have been purchased. A similar growth is seen in EV sup­ply equipment (EVSE), i.e., EV charging stations, with 19,742 documented EV charging station locations in the United States in 2013 to 50,054 documented EV charging …

An Engineering Approach For Evaluating The Lifetime Experience Of Sex Trafficking Victimization, Kimberly Starr Nagulpelli

Dissertations

This research is an original approach that applies industrial engineering and operations research tools to the sociological problem of sex trafficking victimization. Such an approach enables quantitative evaluation of the impacts on an individual’s lifetime by anti-trafficking efforts and public policies.

A fully interconnected, lifetime model for the experience of sex trafficking victimization is defined as the result of a comprehensive review of literature. Beginning with victimization risk, the defined model is an anticipatory tool to understand the incidences and consequences to individuals during their lifetime. This research develops the model further into a Discrete-Time Markov Chain (DTMC) with definitions …

The Acme Building Fire Hazards Analysis, Russ Livesay

Fire Protection Engineering: Culminating Experience Project Reports

This Fire Hazards Analysis (FHA) was written using modern fire protection engineering principles to characterize the Applied Chemistry Management and Enrichment (ACME) Building at the Pacific Northwest National Research Area (PNNRA) using both a prescriptive-based and performance-based analysis to ensure the building and occupants can be safe in fire conditions. Recommendations are made as part of this analysis to improve the survivability of this structure if a fire were to occur.

This building was found to be compliant with the prescriptive code requirements from the 2018 International Building Code except for a few minor issues that are currently being repaired. …

Design Fire Robert E. Kennedy Library, California Polytechnic State, San Luis Obispo, Jennifer Ocampo

Fire Protection Engineering: Culminating Experience Project Reports

This report evaluates the fire protection system of the Kennedy Building using a prescriptive approach and a performance-based design. The prescriptive approach evaluates code compliance of the structural design, fire suppression system, alarm and detection and smoke control. The performance-based design evaluates egress and life safety protection and three design fires that could potentially compromise the goals and objectives of the design.

The Kennedy Building is on the Campus of Cal Poly, San Luis Obispo and serves as the primary library of the university. This building has five stories of mixed occupancies. It is partially sprinklered, has limited automatic detection …

Food Processing And Campus Market (Building 24), Ian De Vries

Fire Protection Engineering: Culminating Experience Project Reports

This report provides a prescriptive and performance-based analysis of the Food Processing Building located on Cal Poly’s campus in San Luis Obispo, California. Food science and nutrition classes take place at the facility where faculty and students manufacture food products such as chocolates, jams, and barbecue sauces. The finished products are offered for sale in the building’s mercantile area, known as the Campus Market, in addition to other retail locations around the city. The Food Processing Building is considered mixed use with portions of the building classified as moderate-hazard factory (F-1), moderate-hazard storage (S-1), business (B), mercantile (M), and assembly …

Office Building In Moffett Park District, Cody Williams

Fire Protection Engineering: Culminating Experience Project Reports

The objective of this review is to analyze and evaluate the fire safety of a 5-story office building located in the Moffett Park District in Sunnyvale, California. The building is constructed largely of mass timber and classified as a Type IIIA building used primarily as office space. The first section of the report focuses on the building’s defining characteristics and use cases. The second portion of the report presents a comprehensive review of egress design, fire alarm systems, fire suppression systems, structural design, implementation of mass timber elements, and flammability requirements. The results of the analysis show that the building …

Fire Protection Engineering For Building A, Ai Choong Loh

Fire Protection Engineering: Culminating Experience Project Reports

Building A is a 9-storey mixed used development in Singapore to be completed in 2028. Fire safety provisions of Building A shall be in accordance with Singapore Fire Code 2018.

The report has analyzed the fire safety provisions in the area of structural fire protection provision, means of escape provision, automatic water suppression system provision, automatic fire detection and alarm system provision, engineering smoke control system provision, flammability assessment as well as performance based assessment.

Generally, building A complied to the prescriptive requirements of automatic water suppression system provision, automatic fire detection and alarm system, structural fire provision and means …

Practical Podcasting: A Technical Guide To Producing Studio-Quality Podcasts, Jacob Sarmiento

Liberal Arts and Engineering Studies

Podcasting exists at the intersection of the technical aspects of audio engineering and disciplines such as journalism and story-telling. Podcasts at KCPR, the student radio station, cover a wide range of topics including the soundscape of the DIY music scene in San Luis Obispo (SLO) on SLO-Fi, the intricacies of navigating SLO on Cal Poly 101, the best of Cal Poly Athletics on The Gallop, and the voices of underrepresented populations on campus on Different Matters. KCPR utilizes podcasts to entertain and inform its audience of the various experiences possible as a Cal Poly student. As a student-run entity, KCPR …

Design And Implementation Of A Prototype Pendulum Platform For Aerospace Controls Education, Zachary A. Wright

Master's Theses

This thesis presents a modular, low-cost, prototype inverted pendulum platform for undergraduate Aerospace control theory research and education. The platform's default configuration integrates a propeller and reaction wheel as its actuators, with multiple sensors available to measure the pendulum's states. The platform utilizes open-source software and hardware to power the actuators, and uses MATLAB/Simulink to streamline data collection. System identification techniques are applied to the platform, and the mathematical model of the pendulum is verified. Momentum exchange between the reaction wheel and propeller during closed-loop stabilization of the pendulum is demonstrated.

Out-Of-Plane Flexural Behavior Of Insulatedwall Panels Constructed With Large Insulation Thicknesses, Jacob Luebke, Fray F. Pozo-Lora, Salam Al-Rubaye, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Insulated concrete sandwich wall panels (ICSWPs) are gaining popularity as energy regulations become stricter worldwide. ICSWPs are now being constructed with thinner wythes and thicker insulation to keep up with the changing market, which is reducing material costs and increasing thermal and structural efficiency. However, there is a need for adequate experimental testing to validate the current design methods for these new panels. This research aims to provide that validation by comparing the predictions of four different methods with experimental data obtained from six large-scale panels. The study found that while current design methods adequately predict the behavior of thin …

Filaments And Their Application To Air Lasing, Spectroscopy, And Guided Discharge, Ali Rastegari

Optical Science and Engineering ETDs

Laser filamentation is a fascinating phenomenon that occurs when an intense laser beam travels through transparent materials, in particular air. At sufficiently high power (TW in the near IR, GW in the UV), instead of spreading out like a regular laser beam, something remarkable happens: the laser beam becomes tightly focused, creating a thin and intense column of light called a laser filament. Laser filamentation is characterized by two main properties: (I) a high-intensity core that remains narrow over long distances beyond the Rayleigh range and (II) a low-density plasma channel within the core. In recent years, laser filamentation has …

Behavior Of Gas Influx In Riser And Considerations For Riser Gas Handling, Mahendra Kumar Kunju

LSU Doctoral Dissertations

Conventional methods of managing Gas-in-Riser events are not optimal when the riser is isolated from the formation by a closed subsea blowout preventer (BOP) on rigs equipped with Mud-GasSeparator (MGS), Managed Pressure Drilling (MPD), or Riser Gas Handling (RGH) equipment. As the use of adaptive drilling processes like MPD facilitates drilling of otherwise non-drillable wells with faster corrective action, the drilling industry should include the effect of gas solubility, dispersion, bubble suspension, fluid compressibility as well as riser ballooning to avoid overestimation of riser pressure and produce more efficient well control methods. The IADC Deepwater Well Control Guideline recommends always …

Enabling The Integration Of Sustainable Design Methodological Frameworks And Computational Life Cycle Assessment Tools Into Product Development Practice, Tejaswini Chatty

Dartmouth College Ph.D Dissertations

Environmental sustainability has gained critical importance in product development (PD) due to increased regulation, market competition, and consumer awareness, leading companies to set ambitious climate targets . To meet these goals, PD practitioners (engineers and designers) are often left to adapt their practices to reduce the impacts of the products they manufacture. Literature review and interviews with practitioners show that they highly valued using quantitative life cycle assessment (LCA) results to inform decision making.

LCA is a technique to measure the environmental impacts across various stages of a product life cycle. Existing LCA software tools, however, are designed for dedicated …

Identifying Key Activity Indicators In Rats' Neuronal Data Using Lasso Regularized Logistic Regression, Avery Woods

Honors Theses

This thesis aims to identify timestamps of rats’ neuronal activity that best determine behavior using a machine learning model. Neuronal data is a complex and high-dimensional dataset, and identifying the most informative features is crucial for understanding the underlying neuronal processes. The Lasso regularization technique is employed to select the most relevant features of the data to the model’s prediction. The results of this study provide insights into the key activity indicators that are associated with specific behaviors or cognitive processes in rats, as well as the effect that stress can have on neuronal activity and behavior. Ultimately, it was …

A Step Toward Understanding Software Development In The Public Sector: A Study Of A Department Of Defense Research And Development Organization, Joshua Q. Church

Theses and Dissertations

This paper focuses on the importance of effective software development processes and a foundational understanding of success factors in the public sector. Although there has been significant investment in information technology, not all public sector software projects result in a successful return on investment. This study explores the crucial factors, referred to as Critical Success Factors (CSFs), that enable the success of public sector software development projects. Additionally, this study aims to discover if the CSFs, the Software Development Life Cycle (SDLC), or its methodologies are more impactful for the success of software projects. This study aims to also identify …

Exploring Methods For Recycling Filament Waste In 3d Printing, Max Rios Carballo

Publications and Research

The goal of the current study is to investigate cutting-edge techniques for recycling filament waste from 3D printing procedures. Appropriate waste management techniques are required to reduce this trash's harmful environmental consequences. The goal of the project is to look at new methods for recycling filament waste in order to minimize disposal and encourage reuse. To acquire data from pertinent papers and research, a thorough literature review methodology was used. The findings show that this issue may be resolved utilizing a variety of recycling techniques, including shredding, melting, and re-extrusion. The type of filament waste and the intended goal will …

Development Of Dynamic Risk-Based Inspection Using Forward Difference Approach For Pipe Failure Due To Uniform Corrosion, Jaka Fajar Fatriansyah, Zahra Nadia Nurullia, Andreas Federico, Dedi Priadi

Journal of Materials Exploration and Findings

The oil and gas industry is one of the world's largest and most influential energy contributors. All aspects involved in the operation of this industry are fundamental to be reviewed and managed correctly, especially by preventing or minimizing the failures that could occur. Uniform corrosion is the most common component failure mechanism that can cause failure in the oil and gas industry. The company's actions in managing and preventing the risk of this type of failure have a major role in the sustainability of the company due to the possibility of more significant impacts if the risk cannot be handled …