Other Engineering Commons^™

Effect Of Degumming Methods On Quality Of Rapeseed And Sunflower Oils, Oybek Zufarov, Kamar Serkayev

Chemical Technology, Control and Management

This study analyzed the effects of different degumming methods on the rapeseed and sunflower oils. Water degumming, acid degumming, and TOP degumming have been employed to reduce the content of phospholipids (P), calcium (Ca), magnesium (Mg), and iron (Fe) in the oils. After water degumming, the number of total phospholipids had decreased significantly (more than 80%) in both oils. Acid degumming further lowered phospholipids content more than 96%, and the protection factor (PF-indicates oxidative stability of oils) of values for rapeseed and sunflower oils have been 1.39 and 1.26, respectively. TOP degumming had effectively removed Fe, the amount of Fe …

Combined Risk Based Inspection And Fault Tree Analysis For Repetitive 3-Phase Line Piping Leakage At West Java Offshore Topside Facility, Dona Yuliati, Akhmad Herman Yuwono, D. Rizal Asral, Donanta Dhaneswara

Journal of Materials Exploration and Findings

Hydrocarbon releases might result in serious consequences in various aspects. In addition to the contribution to environmental pollution, repetitive leakages need high repair costs. This study aim is to minimize potential repetitive leakage for other typical 3-phase piping systems. We conducted the risk assessment by adopting Risk Based Inspection (RBI) API 581 to identify risk level, calculating piping lifetime, recommended inspection plan and mitigations. The most relevant root causes can be obtained through quantitative Fault Tree Analysis (FTA). Observation and investigation was taken from eight 3-phase piping systems that experienced repetitive leakages. It has been found that the risk level …

Nitrogen Gas Quenching Pressure Effect On Bs S155 Alloy Steel In Vacuum Furnace, Agus Mulyadi Hasanudin, Eddy Sumarno Siradj

Journal of Materials Exploration and Findings

The production of metal and alloy products requires the use of heat treatment, when during the heat treatment process, quenching is a crucial step. The quenching medium can be anything from water, a salt bath, oil, air and gas. In a vacuum furnace, pressurized gas, most frequently nitrogen (N₂) gas, serves as one of the quenching mediums. One of the drawbacks of the quenching process is the distortion and dimensional change of the parts. This paper aims to investigate the influence of nitrogen gas quenching pressure on the distortion and dimensional change of aerospace actuator gear planet parts …

Biowall Development For The West Lafayette Public Library, Dhanurja De Silva, Yalin Lu, Siqi He, Ajay Dalal, Bill Hutzel

Purdue Journal of Service-Learning and International Engagement

A group of multidisciplinary Purdue students are working together to design, assemble, and install a Biowall in the Children’s section of the West Lafayette Public Library. A Biowall is a plant-based filter that improves Indoor Environmental Quality by cleaning indoor air and adding a natural aesthetic to the building space. Purdue has been developing Biowall technology since 2012, and this project involves redesigning it to fit into the available space at the library. The new Biowall design incorporates a watering mechanism that allows for children to get actively involved in maintaining the Biowall and learning about sustainability. This project also …

Volumetric Imaging Using The Pupil-Matched Remote Focusing Technique In Light-Sheet Microscopy, Sayed Hassan Dibaji Foroushani

Optical Science and Engineering ETDs

ABSTRACT

The dissertation explores innovative techniques in light sheet microscopy, a pivotal tool in biomedical imaging, to enhance its speed, resolution, and efficiency in capturing dynamic biological processes. Light sheet microscopy allows for quick 3D imaging of biological specimens ranging from cells to organs with high spatiotemporal resolution, large field-of-view, and minimal damage, making it vital for in vivo imaging.

The first project introduces a novel optical concept designed to optimize Axially Swept Light Sheet Microscopy (ASLM). This technique is crucial for imaging specimens ranging from live cells to chemically cleared organs due to its versatility across different immersion media. …

Mechanical Characterization Of Functionally Graded M300 Maraging Steel Cellular Structures, Bradley Jay Sampson

Theses and Dissertations

Traditional methods for increasing the energy absorption of a structure involve using a stronger material or increasing the volume of the structure, resulting in a higher cost or additional weight. Additive manufacturing (AM) can be used to maximize the energy absorption of materials with the ability to create complex geometries such as cellular structures. Previous work has shown that the energy absorption of additively manufactured parts can be improved through functionally graded cellular structures; however, this strategy has not been applied to ultra-high strength steel materials. This work characterizes the effect of multiple functional-grading strategies (e.g. uniform, rod-graded, size-graded) on …

A Review On Ship Recycling Industry In Bangladesh From Global Perspective, Ahammad Abdullah, Zobair Ibn Awal, M Ziauddin Alamgir, Md. Jobayer Mia, Farihatul Mim, Utpal K. Dhar

Journal of Ocean and Coastal Economics

At present, the global center of the ship breaking and recycling industry is in South Asia, specifically Bangladesh, India, and Pakistan. These three countries account for 70–80 percent of the international recycling market for ocean-going vessels, with China and Turkey covering most of the remaining market. Only about 5 percent of global volume is scrapped outside these five countries. Bangladesh has environmentally beneficial coastal region and affordable labor that make the shipbreaking and recycling business as a potential sector for the country. In addition, ship recycling and its related businesses are helping to solve our nation’s unemployment issues at all …

Shop & Speak: The Hottest Eye-Phone App On The Market, Angelo N. Ledonne

Honors Capstones

In the U.S, approximately 20 million individuals (8% of the population) are partly or completely visually impaired. This disability makes some everyday tasks such as reading, writing, shopping, traveling, etc., difficult. But, with the advancement of technology over the past few decades, design products and software have been created that help level the playing field for those in need. The only hurdle that still exists today is the cost and availability of these products, leaving many affected individuals with very little or no assistance in their everyday lives. This project was inspired by my grandmother’s disability. She was born with …

Design And Characterization Of A Novel Eef2k Degrader With Potent Therapeutic Efficacy Against Triple-Negative Breast Cancer, Changxin Zhong, Rongfeng Zhu, Ting Jiang, Sheng Tian, Xiaobao Zhao, Xiaoya Wan, Shilong Jiang, Zonglin Chen, Rong Gong, Linhao He, Jin-Ming Yang, Na Ye, Yan Cheng

Markey Cancer Center Faculty Publications

Dysregulated eEF2K expression is implicated in the pathogenesis of many human cancers, including triple-negative breast cancer (TNBC), making it a plausible therapeutic target. However, specific eEF2K inhibitors with potent anti-cancer activity have not been available so far. Targeted protein degradation has emerged as a new strategy for drug discovery. In this study, a novel small molecule chemical is designed and synthesized, named as compound C1, which shows potent activity in degrading eEF2K. C1 selectively binds to F8, L10, R144, C146, E229, and Y236 of the eEF2K protein and promotes its proteasomal degradation by increasing the interaction between eEF2K and the …

Development Of A User-Friendly Shelf-Life Model To Evaluate The Suitability Of Sustainable Materials In Roasted And Ground Coffee Fractional Packs, Matthew Baxley

All Theses

Roasted and ground coffee is a shelf stable product yet quite sensitive to oxidative staling. A consumer acceptance-based shelf-life modeling system was proposed with intent for the rapid determination of suitable coffee packages. This model requires as input the oxygen consumption rate (OCR) of the coffee, barrier values of packages, and the size of the packaging. Within the time period tested, it was shown that this model accurately predicted the oxygen uptake of coffee over time. Four bio-based packaging systems with barrier layers including mPLA, mPE, mcellophane, and paper were compared against a control (mPET). These materials displayed a range …

Sustainable Diamond-Like Carbon Fabricated Gravure Cylinders For Printing Fine Lines Of Electrodes And Graphic Structures, Chandramohan Seetharamiah Srinivasaraju

Dissertations

The main objective of this work is to evaluate the potential of Diamond-Like Carbon (DLC) as an alternative to chrome for use on gravure cylinders. DLC coatings consist of carbon atoms, arranged into a diamond-like structure that closely resembles that of natural diamond. In contrast to chrome, DLC is environmentally friendly. The focus of the study is to determine the viability of DLC as a substitute material for chrome to be used on gravure cylinders by determining key material properties and evaluating printing performance.

In the first research paper, four DLC variants (Standard DLC, A-DLC, S-DLC, and Organic Silica) and …

Initiation Criteria For The Onset Of Geomagnetic Substorms Based On Auroral Observations And Electrojet Current Signatures, Mayowa Michael Kayode-Adeoye

Graduate Theses and Dissertations (2019 - present)

In recent years, several substorm onset criteria have been developed, either from auroral observations (many authors) or from auroral electrojet properties such as those described by (Forsyth et al., 2015; Maimaiti et al., 2019; Newell & Gjerloev, 2011; Partamies et al., 2011) The different criteria are being investigated using a low order physics model of the magnetosphere called WINDMI (Spencer et al., 2009) and inferences are being made in line with the WINDMI model. The model variables will be compared with the criteria for substorm onset proposed by examining the SML index.

The WINDMI model uses solar wind and IMF …

Underwater Image Enhancement: A Pipeline For Underwater Computer Visions, Humberto Lebron Rivera

Theses and Dissertations

Ocean exploration has surged in popularity and significance in recent years, including diverse areas like maritime archeology, underwater resources, and submerged structure inspection. The activities mentioned above heavily depend on vision and imagery, a challenge in the unpredictable marine world. This thesis presents a conditional generative adversarial network model for image-to-image translation problems. We designed and trained the model with the end goal of enhancing underwater images. Five metrics were employed for validation to quantify our model’s resulting enhanced images. By doing so, we aim to establish a pipeline that can leverage aerial computer vision algorithms for marine applications.

Our …

Addressing Mercury Contamination From Artisanal Gold Mining In Colombia: Pollution Exposure, Health Risk, And Educational Efforts In The Communities Of La Toma, Colombia, Kelli Mccourt

All Dissertations

Artisanal and small-scale gold mining (ASGM) has become a primary environmental and public health concern in the region of Colombia known as Alto Cauca. The predominantly Afro-descendent communities of Yolombó and La Toma in Alto Cauca have experienced pollution linked to the use of mercury in the ASGM process. For the past decade, mercury has emerged as a contaminant of increasing concern in the communities due to its toxicity and ability to bioaccumulate and biomagnify. Likewise, mining in the region raises concerns over the leaching of metals into local waters. Given the complexity of risk and pollution in the communities, …

Interaction In Games: Custom Driving Controller, Christian Crank

Symposium of Student Scholars

The problem I am trying to solve pertains to the high entry costs and the requirements to fully enjoy driving games. Driving games always sound like a fun experience, but without the right controller the game feels lackluster, uncomfortable, and not quite immersive. The problem is, if someone wants a gaming experience that makes the game feel natural and sensory, they may need to drop hundreds to thousands of dollars. Furthermore, they don’t even know if the expensive equipment will provide them with the experience they want. These expensive controllers are set up in a way to be universal and …

Interaction In Games: Digital Board Game Hybrid, Ryan Whisenhunt, Logan Haines

Symposium of Student Scholars

The realm of digital board game hybrids is a relatively new field, and a majority of games currently use computerization for casual board games or accentuating flavor. There is still plenty of room to use these ideas for more complex board games and means. In this study, we explore the avenues in which digital implementation of physical games can provide a streamlined and accessible gameplay experience. Participants in the study will be given a chance to play a short version of the game. A retrospective will be conducted after, where respondents are interviewed on how well the computer supported the …

Organic Electronics In Biosensing: A Promising Frontier For Medical And Environmental Applications, Jyoti Bala Kaushal, Pratima Raut, Sanjay Kumar

Durham School of Architectural Engineering and Construction: Faculty Publications

The promising field of organic electronics has ushered in a new era of biosensing technology, thus offering a promising frontier for applications in both medical diagnostics and environmental monitoring. This review paper provides a comprehensive overview of organic electronics’ remarkable progress and potential in biosensing applications. It explores the multifaceted aspects of organic materials and devices, thereby highlighting their unique advantages, such as flexibility, biocompatibility, and low-cost fabrication. The paper delves into the diverse range of biosensors enabled by organic electronics, including electrochemical, optical, piezoelectric, and thermal sensors, thus showcasing their versatility in detecting biomolecules, pathogens, and environmental pollutants. Furthermore, …

Furthering Development Of Smart Fabrics To Improve The Accessibility Of Music Therapy, Ellie Nguyen, Daisy Z. Fernandez-Reyes, Franceli L. Cibrian

Engineering Faculty Articles and Research

In this paper, we present the design and development of HarmonicThreads, a smart, cost-effective fabric augmented by generative machine learning algorithms to create music in real time according to the user's interaction. In this manner, we hypothesize that individuals with sensory differences could take advantage of the fabric's flexibility, the music will adapt according to users' interaction, and the affordable hardware we propose will make it more accessible. We follow a design thinking methodology using data from a multidisciplinary team in Mexico and the United States. Then we will close this paper by discussing challenges in developing accessible smart fabrics …

Self-Dual Systems For Backscattering Cancellation, Nasim Mohammadi Estrakhri

Engineering Faculty Articles and Research

Using carefully arranged electric and magnetic components, we have recently demonstrated that backscattering from otherwise arbitrarily shaped two- and three-dimensional structures can be fully eliminated. Here, first we investigate the possibility of creating self-dual microwave absorbers that may provide advantages compared to typical commercial magnetoelectric absorbers. Next, we demonstrate that the self-duality condition is not limited to homogenous structures and may be extended to effective material properties, opening the door to realistic implementation of these structures at microwave and optical frequencies.

Introduction To Vacuum Technology, David M. Hata, Elena V. Brewer, Nancy J. Louwagie

Milne Open Textbooks

Vacuum systems are critical to many industries. They are vital to establishing required process pressures, establishing a clean process environment, and removing reaction by-products from the process chamber. This text, a revision and expansion of David Hata’s Introduction to Vacuum Technology published in 2008, addresses basic topics in vacuum technology for individuals tasked with maintaining vacuum systems and instructors teaching technician-level courses. The topics are carefully curated to the needs of technicians in a production environment and the types of vacuum systems used, and the accompanying laboratory manual and instructor’s guide support the delivery of lecture-laboratory courses.

This book approaches …

Adaptive Octree Meshes For Simulation Of Extracellular Electrophysiology, Christopher Bc Girard, Dong Song

Engineering Faculty Articles and Research

Objective. The interaction between neural tissues and artificial electrodes is crucial for understanding and advancing neuroscientific research and therapeutic applications. However, accurately modeling this space around the neurons rapidly increases the computational complexity of neural simulations. Approach. This study demonstrates a dynamically adaptive simulation method that greatly accelerates computation by adjusting spatial resolution of the simulation as needed. Use of an octree structure for the mesh, in combination with the admittance method for discretizing conductivity, provides both accurate approximation and ease of modification on-the-fly. Main results. In tests of both local field potential estimation and multi-electrode stimulation, dynamically adapted meshes …

Investigations On Potassium Penta Borate Based Semi-Organic Materials For Nonlinear Optical Applications, Kamatchi K

Theses and Dissertations

Crystal growth has attained the pinnacle of a point in the current research owing to the requirement of the single crystals in the frontier field of nonlinear optics. Organic crystals exhibit high transparency, high laser damage threshold and de-localized π electron cloud. But they possess weak mechanical stability. In contrast, the inorganic crystals exhibit magnanimous mechanical and thermal properties but have modest nonlinear optical property. If we combine these two materials, then we can obtain the semi-organic materials.

Among the organic materials, the amino acids are chosen and they are mixed with inorganic material potassium penta borate octa hydrate. They …

A Comparison Of Ground Reaction Forces And Muscle Activity Of The Tsunami Bar® Against A Rigid Barbell During Back Squat Phases, John Carver Middleton

Theses and Dissertations

An Institutional Review Board (IRB)-approved study was conducted to investigate the effects of the Tsunami Bar® (TB), a flexible barbell, on ground reaction force (GRF) production and muscle activity in the quadricep, hamstring, and gluteal muscle groups during phases of the squat exercise and compare the effects to the effects to using a rigid barbell (RB). A two-by-two repeated measures Analysis of Variance (ANOVA) test was used to compare the results. Descriptive statistics showed significantly higher GRFs for the TB during the unweighting phase, significant differences in GRFs between speeds for each phase, significantly higher forces on average with the …

All Hands On Deck: Choosing Virtual End Effector Representations To Improve Near Field Object Manipulation Interactions In Extended Reality, Roshan Venkatakrishnan

All Dissertations

Extended reality, or "XR", is the adopted umbrella term that is heavily gaining traction to collectively describe Virtual reality (VR), Augmented reality (AR), and Mixed reality (MR) technologies. Together, these technologies extend the reality that we experience either by creating a fully immersive experience like in VR or by blending in the virtual and "real" worlds like in AR and MR.

The sustained success of XR in the workplace largely hinges on its ability to facilitate efficient user interactions. Similar to interacting with objects in the real world, users in XR typically interact with virtual integrants like objects, menus, windows, …

High-Power Laser Cooling And Temperature-Dependent Fluorescence Studies Of Ytterbium Doped Silica, Brian Topper

Optical Science and Engineering ETDs

Experimental observation of optical refrigeration using ytterbium doped silica glass in recent years has created a new solution for heat mitigation in high-power laser systems, nonlinear fiber experiments, integrated photonics, and precision metrology. Current efforts of different groups focus on compositional optimization, fiber fabrication, and investigating how much silica can be cooled with a laser. At the start of this work, the best effort in laser cooling ytterbium doped silica saw cooling by 6 K from room temperature. This dissertation follows the experimental efforts that culminated in the increase of this initial record by one order of magnitude. Comprehensive spectroscopic …

Examining Biological Algal Harvest For Use In Clemson University’S Algal Carbon Capture System Using Freshwater Mussel Elliptio Complanata, Jack Grimes

All Theses

Capture of atmospheric carbon by freshwater algae is being proposed in Clemson University’s outdoor algal carbon capture system, formerly described as the Partitioned Aquaculture System (Drapcho and Brune, 2000). Several algal species have been present in the system, depending on cultivation conditions. However, mechanical harvesting of the algae has proven difficult because of the cost of chemical flocculants, the energy cost of filtration due to small particle size of algae, and the relatively dilute algal cell concentrations in the system. Prior research on algal filtration by freshwater mussels has indicated its potential for use as a biological filter. This research …

The Effect Of Package Types On Fresh Peaches In The Direct-To-Consumer Distribution Environment, Brennan Lytle

All Theses

The direct-to-consumer (DTC) shipping mode presents new opportunity for fresh peach sales in North America where demand over the past four decades has steadily declined. The hazards in this distribution mode are severe, and fresh peaches are fragile emphasizing the need for proper protection. A full analysis that not only encompasses the effects of the direct-to-consumer distribution environment, but also incorporates analyses of the environmental and economic impact of the packages utilized for transit of peaches is necessary. In this study, we use the metrics of peach grade, firmness, soluble solids concentration, and percent softness before and after the distribution …

Effect Of Heat Input On Microstructure And Mechanical Properties Of Submerged Arc Welded Sm570-Tmc Steel, Toni Yuhandri, Winarto Winarto, Diana Natalia

Journal of Materials Exploration and Findings

SM570TMC is high-strength steel (HSS), which is commonly used in structures that require higher-strength components. In this research, submerged arc welding (SAW)-welded SM570 TMC steels' microstructure and mechanical characteristics were examined. SM570 plates with 12mm thickness were multi-pass welded by using a 3.0 mm diameter of ESAB OK Autrod 13.40 (AWS A5.23: EG) filler metal. The joint design is a single V multi-pass butt weld with a backing strip. Two welded joints were prepared by using heat inputs of 2.2 and 2.9 kJ/mm. The microstructures of two welded joints were observed by using optical microscopy and scanning electron microscope (SEM). …

The Plastics Collection Reference Packet, Special Collections Research Center

Special Collections Research Center

This reference packet is an informational tool to support further research into the history of plastics—whether interested in companies, individuals within the plastics industry's history, historical plastics materials, essays, and more. All content featured within this packet was previously published on the former plastics.syr.edu website as part of a Syracuse University Libraries and Special Collections Research Center (SCRC) partnership established in 2007 with the Plastics Pioneers Association (PPA)—an association of plastics industry professionals interested in preserving the plastics industry's past.

An Effective Heuristic To Reduce Total Flowtime For Randomly-Structured Flowshop Problems, Arun John Abraham

Theses

We propose a heuristic to reduce total flowtime in a six-job, four-machine permutation flowshop scheduling problem. This work contributes to the prolific research efforts reported in the permutation flowshop scheduling problem (PFSP).

The heuristic was applied to 102 randomly structured flowshop scheduling problems, with job processing times generated using an integer uniform distribution in the interval [1,100]. The results of computational experiments were deemed satisfactory after being evaluated by using the ordinal and percentile ranks of the resulting total flowtime for the six jobs.