Other Engineering Commons^™

Fire Protection Analysis Of Johnson Controls Office Building, Derek Driscoll

Fire Protection Engineering: Culminating Experience Project Reports

This project report contains a fire and life safety analysis of the Johnson Controls Office Building. The building is located in Los Angeles, California. The building is a mixed use occupancy with office spaces, meeting rooms, training rooms, and a warehouse for storing fire sprinkler and fire alarm materials. The building is one level with a mezzanine. It is attached to another building and separated by fire barrier so that they are considered separate buildings. This report contains a prescriptive analysis and a performance-based design analysis of the building.

The prescriptive code requirements were determined based on the 2019 edition …

Construction Innovation Center At California Polytechnic State University, James Hunter Gildart

Fire Protection Engineering: Culminating Experience Project Reports

The building of interest for this project is the Construction Innovation Center (CIC) at California Polytechnic State University, San Luis Obispo. The CIC consists of 3 structures (buildings A, B, and C) equipped throughout with a wet pipe automatic sprinkler system and a fire alarm system with smoke detection. This report reviews the prescriptive and performance-based requirements along with providing a fire safety management plan. The prescriptive based portion of this report covers egress, fire alarm, automatic fire sprinklers, flammability, and structural fire protection requirements. Upon completion of the prescriptive code analysis comparing the CIC to the 2015 International Building …

Husky Union Building - University Of Washington Fire And Life Safety Overview And Analysis, Dan Quatier

Fire Protection Engineering: Culminating Experience Project Reports

A fire and life safety analysis was performed on the Husky Union Building, which is the student union building on the campus of the University of Washington in Seattle, WA. This analysis was performed for the fulfillment of requirements for the Master of Science in Fire Protection Engineering degree from California Polytechnic State University San Luis Obispo.

The analysis includes both a prescriptive-based and a performance-based design. The prescriptive analysis includes the following elements: (1) Building Code Overview, (2) Egress Analysis and Design, (3) Fire Alarm and Detection, (4) Water-Based Suppression Systems, and (5) Structural Fire Protection

The prescriptive analysis …

Tucson Student Housing, Abraham Coria

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this report is to perform a two-part analysis of Tucson Student Housing’s fire protection design components. The two-part analysis consists of a prescriptive analysis, and a performance-based analysis. The purpose of the prescriptive-based analysis is to verify Tucson Student Housing meets or exceeds applicable construction standards. The prescriptive based analysis reviews the fire resistance of building elements, flammability of interior finishes, wet suppression system, fire alarm system, voice evacuation system, and occupant egress requirements. The performance-based analysis evaluates the performance of Tucson Student Housing’s fire protection systems when subjected to specified design fires. The design fire scenarios …

Fire Protection And Life Safety Analysis Of Art ‘N Motion, Jordan Albrecht

Fire Protection Engineering: Culminating Experience Project Reports

This report includes a fire protection and life safety analysis for the Art ‘n Motion building. This analysis was done to fulfill the requirement for the Master of Science Degree in Fire Protection Engineering from California Polytechnic State University. The Art ‘n Motion building is two (2) stories, approximately 17,720 sqft, and is Type III-B construction. The building’s primary use is a vehicle showroom business where multiple exotic and antique vehicles are on display, and can be bought and sold. The building is also used as a home base for a NASCAR team, that operates out of the garage area …

Nursing Home Study- Culminating Project Final Report, Ed Hale

Fire Protection Engineering: Culminating Experience Project Reports

This project report is a component of the culminating project required by the California Polytechnic State University, Master of Science, Fire Protection Engineering program. The purpose is to demonstrate the student’s comprehensive knowledge, skill, and ability to evaluate fire and life safety engineering principles utilizing both prescriptive and performance- based design as applied to the built environment. The student project building is a two-story, 78-bed, federally funded, government owned, skilled nursing facility with 90% of the occupants being mobility impaired.

The project building was designed and constructed using prescriptive codes. Fire and life safety structural components, means of egress, fire …

Fire Protection And Life Safety Analysis: Canyon Vista Dining Renovation- University Of California San Diego, Paul Ian Jungco Cabasag

Fire Protection Engineering: Culminating Experience Project Reports

The Canyon Vista Dining project is a renovation of an existing two-story dining facility located in the Warren College area of the University of California San Diego campus for the owners, Housing, Dining and Hospitality. The renovation scope of work comprised a new dining experience with a better diversity of food options and indoor and outdoor seating, which upgraded the first floor, second floor, and mechanical penthouse. In the course of the design and construction, the prescriptive, performance, wildfire, and due diligence design results were utilized during discussions with design team and building permit approval. The project construction was completed …

Christopher Cohan Performing Arts Center Fire Protection And Fire Life Safety Analysis, Alex Dowdy

Fire Protection Engineering: Culminating Experience Project Reports

The Christopher Cohan Performing Arts Center Fire Protection and Life Safety Report evaluates the building’s prescriptive compliance and provides a performance-based analysis. The original construction documents were completed in 1993 in line with UBC 1991 requirements, however, the 2016 Edition of the California Building Code was used for the purpose of this analysis.

The Christopher Cohan Performing Arts Center was constructed as a Type I-B building, fully protected with a sprinkler system and an emergency voice alarm system. The building is located far enough from surrounding buildings as to not require a fire-resistance rated exterior, with the exception of a …

Web Application For Surf Journaling, Zachary James Hislop

Computer Engineering

Before deciding whether to surf, many surfers consult surf forecast services. Current surf forecasting offerings provide general information such as predicted surf height and a condition rating, but these predictions are often misleading, as widely varying swell conditions can receive the same forecast. Additionally, these existing services do not incorporate user feedback into their predictions, which requires users to keep a mental mapping of trends between forecast information and real-life conditions.

This report describes the design and implementation of a web application where users can record the surf conditions and assign ratings to recorded surf sessions. With historical surf conditions …

The Impact Of User Control And Transparency In App Design On Privacy Concerns And Behavior Of Mobile App Users, Arwa Alawajy

Dissertations, Theses, and Capstone Projects

Mobile apps have unprecedented access to sensitive personal information. The increasing commodification of mobile-user data motivates us to explore the vital role of app developers in protecting users’ privacy. This dissertation examines the privacy of mobile app users from the perspective of HCI. According to Communication Privacy Management (CPM) theory, people believe they own their personal information and have the right to control how or with whom they share this information. In practice, individuals manage their privacy system and the boundaries between the public and private domain. Users make privacy disclosure decisions according to their individual characteristics and the perceptions …

Warren J. Baker Center For Science And Mathematics California Polytechnic State University, San Luis Obispo Campus, Matthew Hudson

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this report is to analyze the Warren J Baker Center for Science and Math on the California Polytechnic State University, San Luis Obispo campus. Baker Science is primarily used for classroom and laboratory instruction of college students, with study spaces, faculty offices, and assembly spaces. There are mechanical, electrical, and storage spaces ancillary to the main building functions. The building comprises six floors that are between 23,000 and 44,000 ft2. The first floor contains classrooms, faculty offices, mechanical/electrical spaces, and an auditorium with fixed seating. An atrium connects floors two through five. There are walkways running down …

Sole On The Ocean Hotel, Dale Mcdowell

Fire Protection Engineering: Culminating Experience Project Reports

The following is an analysis of the fire protection systems and services at the Sole On The Ocean, Hotel (pronounced So-lay), Restaurant and Parking Building, located in Sunny Isles (Miami), Florida. Sole is used for temporary sleeping accommodations, business conference and restaurant purposes. The building is considered a high-rise building and is 24 Stories tall. The building occupancy classification is mixed used for Hotel (Residential), Restaurant (Assembly) and Parking (Storage). The prescriptive analysis was based on the Florida Building Code (FBC) which is identical to the International Building Code (IBC) with a few addendums. This report will adhere to the …

California Polytechnic State University – San Luis Obispo Building 180: Baker, Kelly Kessloff

Fire Protection Engineering: Culminating Experience Project Reports

This project was performed as part of the requirements for completion of the Fire Protection Engineering Master’s Program at Cal Poly. This project covers a full prescriptive and performance based analysis on the Warren J. Baker Center for Science and Mathematics. This building was constructed on Cal Poly’s campus in 2013 and serves occupancies such as classrooms, laboratories, and office space for students and professors.

The prescriptive based analysis of this report will analyze the applicable building codes and determine if this building is compliant. Relevant codes include the 2016 California Building and the 2016 California Fire Code. In addition …

Convolutional Neural Networks For Deflate Data Encoding Classification Of High Entropy File Fragments, Nehal Ameen

LSU New Orleans Theses and Dissertations

Data reconstruction is significantly improved in terms of speed and accuracy by reliable data encoding fragment classification. To date, work on this problem has been successful with file structures of low entropy that contain sparse data, such as large tables or logs. Classifying compressed, encrypted, and random data that exhibit high entropy is an inherently difficult problem that requires more advanced classification approaches. We explore the ability of convolutional neural networks and word embeddings to classify deflate data encoding of high entropy file fragments after establishing ground truth using controlled datasets. Our model is designed to either successfully classify file …

Dimensionless Analysis Of Trajectories Of Cylindrical Objects Dropped Into Water In Two Dimensions, Yi Zhen

LSU New Orleans Theses and Dissertations

Nondimensionalization is powerful technique and is widely applied in the study of fluid mechanics and engineering because it helps to reduce the number of free parameters, identify the relative size of effects of parameters, and gain a deeper insight of the essential nature of phenomena. The nondimensionalization of 2D theory has been completed by the author (Zhen et.al.,2020) and new dimensionless equations of motion were obtained. In this study, new dimensionless dynamic equations are extended by incorporating new parameters to cope with various environmental conditions. The new dimensionless analysis of dropped cylindrical objects is consisted of four parts.

Part 1, …

Iot Solutions For Farmers On Livestock Management In Smart City: A Bibliometric Survey, Harikrishnan R, Mohini M Gaikwad

Library Philosophy and Practice (e-journal)

With modernize city approach, concept of IOT – Internet of things achieving popularity and becoming major source for smart innovations. Added advantage of internet application the technology enables sensing, processing and execution automatically and remotely on finger tip. IOT makes sure an easy availability and access to the information available at any corner of the world. In growing countries like INDIA, increase in urbanization led infrastructure expansion; most of the urban cities are now expanding in nearby towns and villages. So towns and villages are merging and becoming part of nearby cities. So the farms, farmer community and their domestic …

Optimization And Characterization Of Doped Optical Fibers For Radiation Balanced Fiber Laser And Amplifier, Mostafa Peysokhan

Optical Science and Engineering ETDs

Due to the reliability, compactness, low maintenance costs, superior performance, and versatility of fiber lasers and amplifiers, they are commonly employed in scientific and directed energy applications. Among all kinds of fiber lasers and amplifiers, high-power, Yb-dopped fiber lasers and amplifiers have been extensively researched to achieve higher output powers. One of the major hindrances to achieving higher powers with adequate stability and efficiency in high power performance is heat generated in the fiber lasers and amplifiers' core. The Radiation Balanced Laser (RBL) is a viable technique for heat mitigation has been proposed by S.~Bowman in 1995. RBL technique is …

Solar Photovoltaic Panels Utilization To Extract Clean And Green Energy For Utility Application Using Pvsyst Software: A Bibliometric Review, Anil Bhati, Mansi Srivastava, Nitesh Aggarwal, Hardik Singh, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

This paper presents a survey on educational documents in the field of solar photovoltaic (PV) utilization to extract clean and green energy. The main purpose of this bibliometric analysis is to understand the size of the available documents for the research of PV solar panel utilization using PVsyst. This detailed review was conducted in the PV research, literature considering all subjects from the Scopus database. The pattern for the specific arrangement of keywords was separated with the recovered results from the Scopus database, publication type, year of publication, distribution conveyance by nations, subject classes, association, authors, and financing organizations. It …

An Integrated Resource Plan Public Service Company Of Colorado (Psco), Angela Paola Ortiz Cely

Master's Projects and Capstones

This report presents an Integrated Resource Plan (IRP) for Public Services of Colorado (PSCo). PSCo is a rate-regulated investor-owned electric utility (IOU) incorporated in 1924 and a subsidiary of Xcel Energy. PSCo largely serves the metropolitan areas of Colorado.

Data-Driven Modeling And Control Of A Two-Link Flexible Manipulator (Tlfm), Samuel Ayankoso

Theses and Dissertations

Two-link flexible manipulators (TLFMs) are used in different application domains, and their merits include lightweight, low energy consumption, high operational speed, transportability, maneuverability, and low cost. Despite the merits of TLFMs, the flexibility of the links introduces modeling and control problems. The existing mathematical modeling techniques of a TLFM, such as the assumed mode method (AMM), finite element method (FEM) and finite difference method (FDM are mathematically complex and do not accurately match the physical system dynamics. Lumped parameter method (LPM) model is a simplified model, but it is also inaccurate. Moreover, different forms of control problems are applicable to …

Using Machine Learning Methods To Predict The Movement Trajectories Of The Louisiana Black Bear, Daniel Clark, David Shaw, Armando Vela, Shane Weinstock, John Santerre, Joseph D. Clark

SMU Data Science Review

In 1992, the Louisiana black bear (Ursus americanus luteolus) was placed on the U.S. Endangered Species List. This was due to bear populations in Louisiana being small and isolated enough where their populations couldn’t intersect with other populations to grow. Interchange of individuals between subpopulations of bears in Louisiana is critical to maintain genetic diversity and avoid inbreeding effects. Utilizing GPS (Global Positioning System) data gathered from 31 radio-collared bears from 2010 through 2012, this research will investigate how bears traverse the landscape, which has implications for gene exchange. This paper will leverage machine learning tools to improve upon existing …

Using Scrum To Teach Standards-Based K-12 Computer Science: A Prosepectus For A Master’S Level Methods Class At Buffalo State, Noah M. Pierce

Career & Technical Education Theses

Computer Science has been increasingly prevalent in K-12 education in recent decades. Most Americans believe that Computer Science is as important as other skills taught in school; further, parents are putting pressure on districts to offer Computer Science programs (1.1). To meet this demand, many teacher preparation programs are adding Computer Science Education to their offering of degrees. This thesis investigates Agile and Scrum product development as a potential method of Computer Science instruction, explores the standards relevant to a Computer Science teacher, and offers a prospectus for a new Graduate Level Methods class to prepare Computer Science teachers to …

Design Of Control Logic And The Human-Machine Interface For A Demonstration Plant Growth Chamber Implemented On A Programmable Logic Controller, Rachael Koehler

Biological and Agricultural Engineering Undergraduate Honors Theses

This honors thesis covers the planning, development, and implementation of system controls and human-machine interface (HMI) for a demonstration plant growth chamber. The work is a continuation of an ongoing project to be used as an educational and recruiting tool manifesting the skills acquired from the Biological and Agricultural Engineering Department at the University of Arkansas’ College of Engineering. This work includes emergency controls, overall design interface, and controls for both the aeration and lighting subsystems of the growth chamber. Overall design interface controls established included development of two user modes, Administrator and Visitor. The Administrator user will have full …

Characterizing Students’ Engineering Design Strategies Using Energy3d, Jasmine Singh, Viranga Perera, Alejandra Magana, Brittany Newell

Discovery Undergraduate Interdisciplinary Research Internship

The goals of this study are to characterize design actions that students performed when solving a design challenge, and to create a machine learning model to help future students make better engineering design choices. We analyze data from an introductory engineering course where students used Energy3D, an open source computer-aided design software, to design a zero-energy home (i.e. a home that consumes no net energy over a period of a year). Student design actions within the software were recorded into text files. Using a sample of over 300 students, we first identify patterns in the data to assess how students …

Project Blipper, Peter Jacobs, Preston Delaware, Ryan Foster

Senior Design Project For Engineers

This project was sponsored by Clorox to design and create an automatic bottle-unscrambling system for possible implementation at their bottling plant in Chile. The objective was to use a robotic arm to unscramble bottles from an incoming conveyor belt and place them upright on an outbound conveyor belt. Throughout the research, design, and testing of solutions for this project, several design alternatives were found for each discipline, and will be presented to Clorox so that they can make an informed decision for how and if they want to move forward with implementation of this project.

The project was split into …

Kennesaw State University And United Alloy Corporation Robotic Pick And Place Project, Kathryn Bharadwaj, Logan Spencer, Tharkun Hudlow

Senior Design Project For Engineers

United Alloy Corporation (UAC), a company specializing in unique aluminum parts for aeronautics, needed a fix to their error prone, labor-intensive billet press operation. The process has a problem of adding the wrong size or wrong alloy billet to the induction oven, which results in a waste of raw materials. The billets range from ten to thirty-seven inches in length and weigh up to three hundred pounds. Currently, an operator uses a gantry crane to check and lift the billets from a rack onto the magazine of an induction oven. The magazine can hold up to three billets safely and …

Versatile Home Workspace Environment, Kayli Holmes

Honors Theses

Since the initial spread of COVID-19, many individuals around the world have experienced a rapid shift from an external workplace, to needing a dedicated workspace within the home. While some individuals have been faced with new distractions like family members and pets, others have been faced with the struggle of having a workspace in common areas, where relaxation and socialization normally occur. Due to the needs for many people to work from home and be isolated from coworkers, it is essential for living spaces to be adaptable to meet these needs. Producing an effective separation can help lead to overall …

Hinging, Propping, And Latching Mechanisms For Sunseeker Solar Car, Zachary Ruppenthal

Honors Theses

In this project, designs for the hinging, propping, and latching mechanisms on the 2021 Sunseeker Solar Car were created. These designs allow for the car’s array of solar panels to be held at any desired angle to maximize collection of solar power and give the team access to the battery and driver compartment. Removable telescoping prop rods with pin attachments are used to set the array at a desired angle. The hinging mechanism allows for the array to be lifted vertically prior to rotation in order to avoid interference with the car’s roll cage. To accomplish this, two four-bar linkages …

Human-Machine Communication: Complete Volume. Volume 2

Human-Machine Communication

This is the complete volume of HMC Volume 2.

The Importance Of Managerial Positions In The Agile Development Process, Adam Gray

Honors Program: Senior Projects (Public)

In software engineering, the Agile development process is becoming one of the most effective methods to handle the issues of continuous change and fast development. However, there are still some perceived issues that many Agile developers face, and a lot of these issues can seemingly stem from their managers. For example, it may seem like the manager is not always up-to-date on the various aspects of the project, or that they have closed off their mind to new ideas. In this paper, we include an in-depth analysis of the various managerial positions that can be found in the Agile development …