Other Engineering Commons^™

Prospects For The Development Of Mortgage Works In Underground Mines, T.U. Khudoyarov, I.Yu Sodiko

Gorniy vestnik Uzbekistana

This article presents analyzes of international experience in the application of laying works and their prospects in the development of deposits with a complex geome- chanical situation. Various options for the composition of the filling mixture are also considered.

Engaging First Year Students With Intellectual Property, Marian G. Armour-Gemmen

Faculty & Staff Scholarship

Since intellectual property is so important to engineers, creating enthusiasm from the beginning of their engineering studies is imperative. Since first year students have not learned how to apply technological concepts to real life, demonstrating intellectual property could be a challenge. To engage first year engineering students in the concept and the value of intellectual property, students were introduced to basic concepts and applications. Different concepts were applied to real life examples allowing them to interface with technology from an intellectual property perspective. This paper highlights not only patents, but also trademarks and trade secrets.

New Stanford Hospital, Fpe 2020 Student

Fire Protection Engineering: Culminating Experience Project Reports

This report is the compiled culminating project for the Fire Protection Engineering Master’s Program at Cal Poly, SLO. Addressed herein is the fire protection and life safety approach for the New Stanford Hospital in Palo Alto, California in accordance with the 2012 NFPA 101 – Life Safety Code and the 2016 California Building and Fire Codes. This includes review of building occupancies, construction type, fire-resistive ratings, means of egress, and fire protection systems. The objective of this report is to review the impact of major fire scenarios on life, property, and operations.

The New Stanford Hospital is a Type IA …

Dynamic Procedural Music Generation From Npc Attributes, Megan E. Washburn

Master's Theses

Procedural content generation for video games (PCGG) has seen a steep increase in the past decade, aiming to foster emergent gameplay as well as to address the challenge of producing large amounts of engaging content quickly. Most work in PCGG has been focused on generating art and assets such as levels, textures, and models, or on narrative design to generate storylines and progression paths. Given the difficulty of generating harmonically pleasing and interesting music, procedural music generation for games (PMGG) has not seen as much attention during this time.

Music in video games is essential for establishing developers' intended mood …

Mass Spectrometric Calibration For Real -Time Hydrocarbon Detection, Makuachukwu Mbaegbu

LSU Master's Theses

Determining gas compositions from live well fluids on a drilling rig is critical for real time formation evaluation. However, development and utilization of a reliable mass spectrometric method to accurately characterize these live well fluids is always a challenging issue because of lack of a robust, quick and effectively selective instrument and method. The primary goal of this research is to understand reasons of such discrepancies in results between “good” spectra, and “poor” ones. The objectives are thus to identify the detection issues, calibrate and QA/QC the instruments, and analyze the results in lab settings. In this study, we used …

Millimetre-Wave Planar Bruce Array Antenna, Zeeshan Ahmed, Manh Ha Hoang, Patrick Mcevoy, Max Ammann

Conference papers

A tri-band mm-wave planar Bruce array antenna for fifth generation communications (5G) is presented. The 16-element planar Bruce array antenna is simulated and fabricated on Rogers RT/Duroid 5880 substrate with thickness of 0.254 mm. For a compact and simple structure, the antenna has a highly directional fan-beam radiation pattern at broadside and peak realized gain of 14.0 dBi.

Human-Machine Communication: Complete Volume. Volume 1

Human-Machine Communication

This is the complete volume of HMC Volume 1.

Toward An Agent-Agnostic Transmission Model: Synthesizing Anthropocentric And Technocentric Paradigms In Communication, Jaime Banks, Maartje M. A. De Graaf

Human-Machine Communication

Technological and social evolutions have prompted operational, phenomenological, and ontological shifts in communication processes. These shifts, we argue, trigger the need to regard human and machine roles in communication processes in a more egalitarian fashion. Integrating anthropocentric and technocentric perspectives on communication, we propose an agent-agnostic framework for human-machine communication. This framework rejects exclusive assignment of communicative roles (sender, message, channel, receiver) to traditionally held agents and instead focuses on evaluating agents according to their functions as a means for considering what roles are held in communication processes. As a first step in advancing this agent-agnostic perspective, this theoretical paper …

Extending Complex Conjugate Control To Nonlinear Wave Energy Converters, David G. Wilson, Rush D. Robinett Iii, Giorgio Bacelli, Ossama Abdelkhalik, Ryan Coe

Michigan Tech Publications, Part 1

This paper extends the concept of Complex Conjugate Control (CCC) of linear wave energy converters (WECs) to nonlinear WECs by designing optimal limit cycles with Hamiltonian Surface Shaping and Power Flow Control (HSSPFC). It will be shown that CCC for a regular wave is equivalent to a power factor of one in electrical power networks, equivalent to mechanical resonance in a mass-spring-damper (MSD) system, and equivalent to a linear limit cycle constrained to a Hamiltonian surface defined in HSSPFC. Specifically, the optimal linear limit cycle is defined as a second-order center in the phase plane projection of the constant energy …

The Desorption Kinetics Of Methane From Nonaqueous Fluids For Enhanced Well Control, James Lee Nielsen Jr.

LSU Master's Theses

The mass transfer of a dissolved gas evolving to return to the gaseous phase from a liquid is governed by many parameters. This process affects the development of an oil and gas well due to the possibility of gas contamination occurring from either an influx entering the wellbore, or drilling through gas-bearing formations. Once this dissolved hydrocarbon gas circulates up the wellbore, it will begin to evolve from solution and poses a potential risk to drilling equipment, the environment, and personnel at a drilling rig. Being able to predict the behavior of gas desorption based on a known set of …

Development And Validation Of A Simplified Transient Two-Phase Flow Model For Any Pipe Inclination, Ligia Tornisiello

LSU Master's Theses

This study describes the development and validation of an improved simplified model for transient two-phase flow for any pipe inclination. The simplified model proposed has been validated with field-scale test well and laboratorial data, and also compared to the state-of-the-art commercial simulator for transient two-phase flow in pipes. The results of the simplified model showed an agreement within the range of ±30% for the holdup predictions for 65% of the scenarios, and an agreement within the range of ±30% for the pressure predictions for 82% of the scenarios considered in this work.

In the oil and gas industry, transient two-phase …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Applying Facets Of Work As A Source Of Knowledge And Insight For Requirements Determination, Steven Alter

Business Analytics and Information Systems

This conceptual contribution explains how the idea of “facets of work” can bring more knowledge and richer, more evocative ideas to the development of system requirements in organizational settings. Focusing on facets of work potentially provides useful guidance without requiring unnecessary details, precision, and notation. A background section summarizes how the current research emerged from partial overlaps between separate research efforts. Table 1 identifies 18 facets of work. Five other tables look at a subset of the facets to illustrate concepts associated with specific facets, common success factors and tradeoffs, sub-facets and other topics. Use of the same subset of …

Concrete Beam Design: Pouring The Foundation To Engineering In T&E Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Ask a middle or high school student if they could design a concrete beam that weighs only 20 pounds and is 36” long but must hold 600 pounds without failing. What is the student likely to say? What if the student was told that, with some optimized decision making based on relatively straightforward mathematics, their beam could hold 2400 pounds or more? The focus of this article is not on concrete beam design, it is rather an introduction to engineering principles in beam design using a lab activity. The concepts and skills learned in this article will lead students into …

Exploring The Curricular Content Of Engineering Ethics Education In Ireland, Diana Adela Martin, Eddie Conlon, Brian Bowe

Conference papers

Our contribution aims to determine the main curricular themes employed in engineering ethics instruction. In the use of the term `curricular content", the study is guided by an understanding of curriculum in terms of the syllabus content of a specific discipline or set of units taught to students. The research study has been conducted in cooperation with the national accrediting body Engineers Ireland and includes 23 Engineering programmes from 6 institutions in Ireland that underwent accreditation between 2017-2019. The research method employed is a documentary analysis of the materials prepared by the programmes for accreditation or made available on the …

Pretreatment Of Loblolly Pine Tree Toppings (Needled) Using Dess, Prathima Gujjula

Master's Theses

Contemporary industrial development and swift urbanization require environmentally sustainable energy sources. Ethanol made from biomass provides unique environmental and economic strategic benefits and can be considered a safe and clean liquid fuel alternative to fossil fuels. Ethanol’s significant advantages, such as low cost, biodegradability, and abundance, make the application of biomass for production of biorenewable energy favorable. However, biomass must be subjected to pretreatment processes to liberate the components needed for effective enzymatic hydrolysis that converts cellulose to sugars prior to fermentation to create biofuel. Production of valueadded co-products besides biofuels, through coordinated bio refinery processes, requires selectivity during pretreatment. …

Investigating Multidimensional Characteristics Of Noise Signals With Tones From Building Mechanical Systems And Their Effects On Annoyance, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper investigates multidimensional characteristics of tonal noise from heating, ventilation, and air-conditioning systems, besides loudness and tonality, to improve prediction of annoyance. Two studies were conducted: multidimensional scaling (MDS) analysis to determine what other perceptual signal characteristics are important and perceptual weight analysis (PWA) to understand the impact of multiple tones in a signal. In the MDS study, paired comparison tasks were conducted to gather similarity and annoyance data. Results show that the latent perceptual dimensions are related to the signal’s tonality, loudness, sharpness, and roughness. Including metrics for these perceptions, except roughness, improves the performance of earlier annoyance …

Comparison Of Hybridizing Options For Solar Heat, Biomass And Heat Storage For Electricity Generation In Spain, Cm Iftekhar Hussain, Brian Norton, Aidan Duffy

Articles

Diurnal and seasonal variations of direct solar energy circumscribe locations suitable for sole use of concentrated solar power for electricity generation, whereas to generate electricity at night and during winter months, biomass systems can be used that incur fuel expenditures and may encounter fuel supply discontinuities. Combining solar heat, biomass conversion and heat storage in a hybrid electricity generation plant may overcome the limitations of sole use of any one of these energy sources in specific geographic and/or economic conditions. In this work standalone biomass, hybrid concentrated solar power-biomass and hybrid concentrated solar power-biomass-thermal energy storage power generation systems are …

Mapping The In-Plane Electric Field Inside Irradiated Diodes, L. Poley, A.J. Blue, C. Buttar, V. Cindro, C. Darroch, V. Fadayev, J. Fernandez-Tejero, C. Fleta, C. Helling, C. Labitan, I. Mandic, S.N. Santpur, D. Sperlich, M. Ullan, Y. Unno

Articles

A significant aspect of the Phase-II Upgrade of the ATLAS detector is the replacement of the current Inner Detector with the ATLAS Inner Tracker (ITk). The ATLAS ITk is an all-silicon detector consisting of a pixel tracker and a strip tracker. Sensors for the ITk strip tracker have been developed to withstand the high radiation environment in the ATLAS detector after the High Luminosity Upgrade of the Large Hadron Collider at CERN, which will significantly increase the rate of particle collisions and resulting particle tracks. During their operation in the ATLAS detector, sensors for the ITk strip tracker are expected …

The Impact Of Stress Shadowing With Variations In Cluster Spacing On The Production For Wells Completed In The Marcellus Shale, Joshua R. Dietz

Graduate Theses, Dissertations, and Problem Reports (ETD)

The design of the well stimulation treatment has significantly changed over the last decade because of the advancement of hydraulic fracturing. The cluster and stage spacing design component of hydraulic fracturing has been a key factor in enhancing the production from the horizontal wells. Recently, the treatment designs are moving towards lower cluster spacing. The reduction of the spacing alters the in-situ stresses in the formation and begin to impact the propagation of next set of future fractures and the properties of previous fractures. These stress alterations from hydraulic fracturing is referred to as stress shadowing.

The objective of study …

A Novel Structural Health Monitoring Method For Reinforced Concrete Bridge Decks Using Ultrasonic Guided Waves, Ece Erdogmus, Eric Garcia, Ahmad Shoaib Amiri, Michael Schuller

Durham School of Architectural Engineering and Construction: Faculty Publications

This article presents the latest improvements in a recently developed nondestructive testing (NDT) approach for early detection of various flaws (corrosion, delamination, and concrete cracking) in reinforced concrete (RC) bridge decks. The proposed method involves the use of internal steel reinforcement as a wave guide for transmitting ultrasonic waves through the system and the measurement of leaked energy from the surface of the concrete. This paper builds upon the progress made in the previously published phases of the project and aims to further explore the capabilities and practicality of the proposed NDT method. Specifically, the limits of propagation distance, effect …

Analysis Of The Variability Of Project Cost And Schedule Performance In The Design-Build Environment, Yunping Liang, Baabak Ashuri, Wei Sun

Durham School of Architectural Engineering and Construction: Faculty Publications

Design-build (DB) projects are getting more implementations in the United States. Several studies indicate that the DB project delivery system has advantages in project cost and schedule performance. Despite having comparative advantages, DB projects are found to be far from immune from cost overruns and schedule delay in those studies. It is critical to understand the effects of various factors underpinning the cost and schedule performance of DB projects. The overall objective of this research is to utilize cluster analysis and statistical analysis to identify factors with significant potentials to describe the variability of project cost and schedule performance in …

Option Value Of Contingent Finance Support In Transportation Public-Private Partnership Projects, Yunping Liang, Baabak Ashuri

Durham School of Architectural Engineering and Construction: Faculty Publications

Uncertainties about construction cost and operational revenues are two major risks in transportation public-private partnership (P3) projects. These uncertainties put projects at risk of being unable to fulfill annual debt repayment obligations. When a project generates insufficient cash flow to service the debt in a certain year, it normally has to go for short-term financing by borrowing short-term loans. With the help of revenue risk-sharing mechanisms, supported projects may be able to get rid of unexpected interest disbursement. The objectives of this paper are twofold: (1) evaluate the refinancing cost of P3 highway projects caused by cash flow shortage and …

Estimation Of Atmospheric Conditions Over A Long Horizontal Path Using Multi-Frame Blind Deconvolution (Mfbd) Techniques In Comparison With Delayed Tilt Anisoplanatism (Delta) Software, Hannah Stoll

Dissertations, Master's Theses and Master's Reports

The potential to track and view objects in space from the ground with greater near real time knowledge of the intervening turbulence would be a revolutionary capability. The objective of this thesis is to cross-validate two separate methods used to estimate the Fried parameter. This verification is a step toward a commercial grade product that would make real-time estimates of the turbulence strength along an optical path from a ground-based observatory to a satellite in orbit around the Earth. Michigan Technological University has developed a multi-frame blind deconvolution (MFBD) algorithm used to estimate r0 and it was tested against MZA’s …

A Direct Data-Cluster Analysis Method Based On Neutrosophic Set Implication, Florentin Smarandache, Sudan Jha, Gyanendra Prasad Joshi, Lewis Nkenyereya, Dae Wan Kim

Branch Mathematics and Statistics Faculty and Staff Publications

Raw data are classified using clustering techniques in a reasonable manner to create disjoint clusters. A lot of clustering algorithms based on specific parameters have been proposed to access a high volume of datasets. This paper focuses on cluster analysis based on neutrosophic set implication, i.e., a k-means algorithm with a threshold-based clustering technique. This algorithm addresses the shortcomings of the k-means clustering algorithm by overcoming the limitations of the threshold-based clustering algorithm. To evaluate the validity of the proposed method, several validity measures and validity indices are applied to the Iris dataset (from the University of California, Irvine, Machine …

Deep Learning Based Face Detection And Recognition In Mwir And Visible Bands, Suha Reddy Mokalla

Graduate Theses, Dissertations, and Problem Reports (ETD)

In non-favorable conditions for visible imaging like extreme illumination or nighttime, there is a need to collect images in other spectra, specifically infrared. Mid-Wave infrared (3-5 microm) images can be collected without giving away the location of the sensor in varying illumination conditions. There are many algorithms for face detection, face alignment, face recognition etc. proposed in visible band till date, while the research using MWIR images is highly limited. Face detection is an important pre-processing step for face recognition, which in turn is an important biometric modality. This thesis works towards bridging the gap between MWIR and visible spectrum …

Design Of Pigments For Use In “Cool” Coatings, Tyler Laughorn

Williams Honors College, Honors Research Projects

This project was focused on the development and testing of several novel pigments that exhibit high NIR-reflectance and therefore show potential for use in “cool” coatings. A “cool” coating will reflect more solar radiation than other standard coatings, and so a coated structure would require less energy to keep cool. Four sets of pigments were synthesized: Co_1-xMg_xCr₂O₄ (teal), Co_0.25Mg_0.75Cr_2-yAl_yO₄ (blue), Ti_1-x-yNi_xSb_yO₂ (yellow), and Cr_2-xFe_xO₃ (black). NIR and TSR values were then measured …

An Experiential Online Training Approach For Underrepresented Engineering And Technology Students, Arefeh Mohammadi, Kevin Grosskopf, John Killingsworth

Durham School of Architectural Engineering and Construction: Faculty Publications

Workforce pipelines are essential to sustain a productive workforce in an increasingly competitive, high-tech environment. Advanced automation, sensors, materials and data analytics will increase the need for highly skilled workers in the manufacturing (and manufactured construction) sector. Attracting and developing the next-generation workforce is not without its challenges; however, students are often deficient in technical skills and generally have negative perceptions about manufacturing and construction. As a result, new education and training models have been developed to provide instruction at all levels of the educational system, with a focus on both traditional students and non-traditional students, including ethnic minorities, women, …

Solvent-Free Coating Using Maco Bio-Based Reactive Diluent, Ryder James

Williams Honors College, Honors Research Projects

The project performed utilizes methacrylated cardanol (MACO) and a linseed oil resin to test how different weight percentages of MACO affect coating performance. MACO is synthesized from a phenolic lipid extracted from cashew nut shells, which are a cashew industry waste product. Not only does it utilize a waste product, but being a bio-based reactive diluent means it can replace the use of volatile organic solvents that are harmful to both humans and the environment. Weight percentage samples of 0%, 10%, 20%, 30%, and 40% were used. Coatings were applied using a 6-mil drawn down bar, with samples being prepared …

Household’S Willingness (Wtp) To Pay To The Utility, Rakhshinda Bano, Mehdi Khiadani, Steven Burian

Research Datasets

The dataset contains the water use at household level, payments to the utility and household income.