Systems Engineering Commons^™

High Temperature Filter Test Unit Upgrades, Blair Frandeen, Will Schill, Erick Shewmaker, Joshua Turgeon

Mechanical Engineering

The purpose of this project was to improve the existing High Temperature Filter Test Unit (HTTU) by optimizing performance and adding new features. These features include viewing ports and a camera system for observation of tests, a leak detection system, and a flame impingement system. Additional considerations included improving the current operation of the HTTU by reducing test time and energy loss. The HTTU is designed to test High Efficiency Particulate Air (HEPA) filters at temperatures up to 1300 ˚F, creating conditions which simulate a fire in a chemical processing facility. The HTTU was originally built as a Cal Poly …

A Unified Enterprise-Wide Cost Modeling Framework For Engineering Applications Based On Systems Engineering Principles, Yousuf S. Mohammed

Mechanical & Aerospace Engineering Theses & Dissertations

In the present research the problem of enterprise-wide cost modeling is approached from a systems engineering standpoint. What this does is to use each stage of product life cycle to obtain useful information that helps in estimating the cost of the system. Once a generic framework is developed for estimating the core cost, layers of other factors that affect the cost are applied to the core cost, such as risk and uncertainty, maintainability, supply-chain and socioeconomic conditions. The cost model is expanded to accommodate a product domain ranging from a simple object to a system in the following hierarchy: System, …

Learning From Failure In Systems Engineering: A Panel Discussion, Nathan Slegers, Ronald T. Kadish, Gary E. Payton, John Thomas, Michael D. Griffin, Dan Dumbacher

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

This paper summarizes the discussion of the Learning from Failure in Systems Engineering panel that was held in Huntsville, AL on November 8, 2010. The panel objective was to discuss how systems engineers respond to and learn from failure and identify future directions important to the community. The panel consisted of four representatives with experience in government, industry, and academia: (1) Ronald Kadish from Booz Allen Hamilton and former director of the Missile Defense Agency, (2) Gary Payton, retired Deputy Under Secretary of the Air Force for Space Programs, (3) John Thomas from Booz Allen Hamilton and President-elect of INCOSE, …

Ground Support Equipment For Northrop Grumman Massive Heat Transfer Experiment, Michael A. Manuel, Christopher J. Sparber, Greg A. Trent

Aerospace Engineering

California Polytechnic State University students designed, built, and certified ground support equipment for the Northrop Grumman Massive Heat Transfer Experiment. The Cal Poly design team built the 10000, 20000, and 30000 assemblies to meet Northrop Grumman requirements. The requirements included interface limitations, design load factors, delivery, and testing specifications. The design process consists of requirements generation, conceptual design, preliminary design, design reviews, manufacturing, and certification. The hardware was successfully completed and is used at the Johnson Space and Kennedy Space Center.

Design For Manufacturing Of Sports Equipment, Cedrick Bit, Christopher L. Head

Industrial and Manufacturing Engineering

The purpose of this project was to validate industrial designs for a product in its conceptual stage and suggest/implement design changes that suit the contracting company’s needs while assuring the product maintains its basic functional requirements. Techniques and methods used to validate the design include 3‐D solid modeling, physical product application using rapid prototyping to produce the product. Methods of design for manufacturing were analyzed in the design. Processes used in the validation and verification of the design include solid modeling design, methods of measurements, fixture design and manufacturing processes. Full design specifications and solid model files were finalized and …

Case Studies On Usage Of Axiomatic Design Methodology In The U.S. Industries, Alireza Alavizadeh

All-Inclusive List of Electronic Theses and Dissertations

Axiomatic Design, originally developed by Nam Suh, is a design methodology that attempts to systematize the design practices and to provide a basis on which design can be carried out and optimized according to two main axioms, namely, Independence and Information axioms. Although various scholars in both academia and industry have studied the applicability and effectiveness of this methodology, the extent to which Axiomatic Design has been implemented in industry, particularly in the U.S., is unknown. l1l This study was conducted to identify the extent to which Axiomatic Design is known to the U.S. industries. Other purposes of this study …

Leanness And Agility In Job Shops: A Framework For A Survey Instrument Developed Using The Delphi Method, Zaki Kuruppalil

All-Inclusive List of Electronic Theses and Dissertations

Manufacturers are facing new challenges as competition has become global. Manufacturing companies arc looking for strategies which would help them gain an edge over their competitors. In the United States, lean manufacturing and agile manufacturing have been gaining importance among industries. Agile manufacturing was developed when the United States Department of Defense (DOD) requested Iacocca Institute at Lehigh University to develop a manufacturing framework that could give US companies an edge over their worldwide competitors whereas lean manufacturing has its roots tied to the Toyota Production System (TPS). This raises the questions: what is the clear difference between the two …

Windmill Documentary, Timothy David Stoltenburg

Honors Capstones

Capstone submitted as a graduation requirement for the BSU Honors Program.

Combining Systematic Layout Planning And Computer Simulation In The Design Of Manufacturing Facilities, Akintoye M. Akinyoade

All-Inclusive List of Electronic Theses and Dissertations

In this study, the systematic layout planning (SLP) and computer simulation were combined to improve the layout design of a manufacturing facility using a case study.

A Comparative Study On Projected And Actual Manufacturing Times To Identify The Source Of Customer Delinquency, Zaki Kuruppalil

All-Inclusive List of Electronic Theses and Dissertations

This study was an investigation of the projected lead time and the actual lead time for a part manufactured at Tri-Industries Inc., Terre Haute, Indiana. The research was focused on a single part produced in Tri-Industries. The problem was that there is a difference in the projected lead time and the actual lead time of the part under investigation. The actual lead time was longer than projected lead time, which resulted in the company being delinquent in customer delivery. This investigation was conducted to find out the source for customer delinquency for a single part in Tri-Industries. The conclusion was …

Simulation Of Engineering Systems Described By High-Index Dae And Discontinuous Ode Using Single Step Methods, Marc Compere

Publications

This dissertation presents numerical methods for solving two classes of or-dinary diferential equations (ODE) based on single-step integration meth-ods. The first class of equations addressed describes the mechanical dynamics of constrained multibody systems. These equations are ordinary differential equations (ODE) subject to algebraic constraints. Accordinly they are called differential-algebraic equations (DAE).

Specific contributions made in this area include an explicit transforma-tion between the Hessenberg index-3 form for constrained mechanical systems to a canonical state-space form used in the nonlinear control communities. A hybrid solution method was developed that incorporates both sliding-mode control (SMC) from the controls literature and post-stabilization from …

Development Of A Knowledge-Based System For Generating Process Plans Using Group Technology: A Study For Norfolk Naval Shipyard, William P. Keene Jr.

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to study and analyze the Norfolk Naval Shipyard's manufacturing methods of determining part families and generating part process plans for parts in the machine shop. A knowledge-based decision support system was designed based on knowledge acquired from machinist experts and documented sources of the Norfolk Naval Shipyard. The system interprets specific part information provided by the user, categorizes parts into part families and generates process plans to manufacture the parts. The system was evaluated and tested for parts provided by Norfolk Naval Shipyard.

An Assessment Of Just-In-Time Manufacturing, Ronald E. O'Meara

Graduate Research Papers

Manufacturing of materials into useable products has changed dramatically since the Industrial Revolution. The United States dominated the manufacturing arena until the early 1970s. After that period, efforts of global competitors in such areas as quality control and productivity, started to surpass the efforts made by the United Stated in these same areas. For the first time, U.S. manufacturers started sensing the pressure of competition. The United Stated is using its competitive advantage over other nations in the manufacturing segment. Part of this loss is a result of the way the U.S. manufacturers are conducting their business. A larger part …

Low-Frequency Dynamics Of Moored Vessels, Bohdan W. Oppenheim, P. A. Wilson

Systems Engineering Faculty Works

Three complete theories of the low-frequency dynamics of ships and disks moored with multileg mooring systems in deep water are derived, evaluated, and computerized. One theory is nonlinear; it includes the effects of cubic damping, nonlinear mooring forces and the excitation-yaw motion feedback, and it is handled by simulation. It yields random, regular and transient records, probabilities and statistics, exact and linearized transfer functions, and spectra of responses. The second theory is linear, solved in the frequency domain. The third is a static theory, which is a by-product of the linear one. Mooring lines of arbitrary compositions are considered.

Eight Tractors In The 35-45 H.P. Class. Part 1, W F. Baillie, G. H. Vasey

Journal of the Department of Agriculture, Western Australia, Series 4

Summary report of tests on tractors in the 35-45 h.p. class by the Australian Tractor Testing Committee, based on Tractor Tests Nos. 38 to 45. Part 1