Systems Engineering Commons^™

Generic Design Methodology For Smart Manufacturing Systems From A Practical Perspective, Part I—Digital Triad Concept And Its Application As A System Reference Model, Zhuming Bi, Wen-Jun Zhang, Chong Wu, Chaomin Luo, Lida Xu

Information Technology & Decision Sciences Faculty Publications

Rapidly developed information technologies (IT) have continuously empowered manufacturing systems and accelerated the evolution of manufacturing system paradigms, and smart manufacturing (SM) has become one of the most promising paradigms. The study of SM has attracted a great deal of attention for researchers in academia and practitioners in industry. However, an obvious fact is that people with different backgrounds have different expectations for SM, and this has led to high diversity, ambiguity, and inconsistency in terms of definitions, reference models, performance matrices, and system design methodologies. It has been found that the state of the art SM research is limited …

Generic Design Methodology For Smart Manufacturing Systems From A Practical Perspective. Part Ii—Systematic Designs Of Smart Manufacturing Systems, Zhuming Bi, Wen-Jun Zhang, Chong Wu, Chaomin Luo, Lida Xu

Information Technology & Decision Sciences Faculty Publications

In a traditional system paradigm, an enterprise reference model provides the guide for practitioners to select manufacturing elements, configure elements into a manufacturing system, and model system options for evaluation and comparison of system solutions against given performance metrics. However, a smart manufacturing system aims to reconfigure different systems in achieving high-level smartness in its system lifecycle; moreover, each smart system is customized in terms of the constraints of manufacturing resources and the prioritized performance metrics to achieve system smartness. Few works were found on the development of systematic methodologies for the design of smart manufacturing systems. The novel contributions …

Nebulizer-Based Systems To Improve Pharmaceutical Aerosol Delivery To The Lungs, Benjamin M. Spence

Theses and Dissertations

Combining vibrating mesh nebulizers with additional new technologies leads to substantial improvements in pharmaceutical aerosol delivery to the lungs across therapeutic administration methods. In this dissertation, streamlined components, aerosol administration synchronization, and/or Excipient Enhanced Growth (EEG) technologies were utilized to develop and test several novel devices and aerosol delivery systems. The first focus of this work was to improve the poor delivery efficiency, e.g., 3.6% of nominal dose (Dugernier et al. 2017), of aerosolized medication administration to adult human subjects concurrent with high flow nasal cannula (HFNC) therapy, a form of continuous-flow non-invasive ventilation (NIV). The developed Low-Volume Mixer-Heater (LVMH) …

Towards A Cyber-Physical Manufacturing Cloud Through Operable Digital Twins And Virtual Production Lines, Md Rakib Shahriar

Graduate Theses and Dissertations

In last decade, the paradigm of Cyber-Physical Systems (CPS) has integrated industrial manufacturing systems with Cloud Computing technologies for Cloud Manufacturing. Up to 2015, there were many CPS-based manufacturing systems that collected real-time machining data to perform remote monitoring, prognostics and health management, and predictive maintenance. However, these CPS-integrated and network ready machines were not directly connected to the elements of Cloud Manufacturing and required human-in-the-loop. Addressing this gap, we introduced a new paradigm of Cyber-Physical Manufacturing Cloud (CPMC) that bridges a gap between physical machines and virtual space in 2017. CPMC virtualizes machine tools in cloud through web services …

Designing An Adjustable And Transportable Staircase, Allison Currey

Undergraduate Honors Thesis Projects

People climb stairs every day, whether it is at work, a store, or at home; however, there are populations such as people who are elderly, with pathologies, with Parkinson’s disease, or have suffered from a stroke that see climbing the stairs as a challenging task and it decreases their mobility and quality of life. Factors such as muscle weakness, strategy, and balance have been previously investigated in these populations during stair climbing. However, few studies have researched how stair climb ability, balance, and perception of difficulty are influenced by step height. The objective of this thesis is to design a …

Kinematic Analysis Of Forehand Drop Shot And Long Shot Services In Table Tennis, Ibrahim Norzuria

Student Works (2020-2029)

Table tennis is one of the most widely played sports in the world. A frequent hand movement is compulsory to execute stroke than other limbs, especially the projection of racket and ball speeds,which can help to improve players’ performance. Until now, research on table tennis serving is limited. Service was assumed important in table tennis because the effective serve may allow the serving player to have advantage and control over the game. The 3D dynamic analysis is the appropriate method to analyze a sport activity such as table tennis. Therefore, the aim of research was to determine the kinematic involved …

Internet Of Things In Sustainable Energy Systems, Abdul Salam

Faculty Publications

Our planet has abundant renewable and conventional energy resources but technological capability and capacity gaps coupled with water-energy needs limit the benefits of these resources to citizens. Through IoT technology solutions and state-of-the-art IoT sensing and communications approaches, the sustainable energy-related research and innovation can bring a revolution in this area. Moreover, by the leveraging current infrastructure, including renewable energy technologies, microgrids, and power-to-gas (P2G) hydrogen systems, the Internet of Things in sustainable energy systems can address challenges in energy security to the community, with a minimal trade-off to environment and culture. In this chapter, the IoT in sustainable energy …

Development Of Bio-Based 2t Engine Oil In Marine Engine Application / Babooraman Shanmuganathan, Babooraman Shanmuganathan

Student Works (2020-2029)

Two-storke enginers are simple and lightweight two-cycle spark ignition engine with no oil sump is needed. The use of bio-based lubricants was analyzed to replace commercial mineral and synthetic-based lubricants. Lubricants were prepared by mixing three components of oil which comprise of base oil, additives, and solvent. In this research, four samples of base oil had been prepared with a different weight ratio of the PFAD-NPGester and Type II mineral. Then each of the simples were added with a similiar weight ratio of additives and solvent. A commercial lubricant was used as areference lubricant to be compared with samples prepared. …

An Analysis Of Resistance Spot Weld Quality Based On Acoustic And Electrical Signatures, Ivan Charles Butler

Theses and Dissertations--Manufacturing Systems Engineering

The union of a set of materials by way of Resistance Spot Welding is designed so that once fused together, a substantial amount of intentional, external force must be applied to separate the contents. Therefore, Resistance Spot Welding is often the preferred fusion method in high-volume manufacturing processes. The result of Resistance Spot Welding however is the formation of a weld nugget which is not visible to the naked eye. Destructive and/or ultrasonic methods applied off-line must be used to determine the quality of each weld; both inefficient and expensive processes. The following research analyzes the data fed back during …

Energy Efficiency Evaluation Of Blower Heater Non-Purge Compressed Air Dryers, Alexandra M. Botts

Graduate Theses, Dissertations, and Problem Reports (ETD)

There are several compressed air dryers available for industrial use including, refrigerant, desiccant, and membrane. This research focuses on twin tower regenerative closed loop desiccant dryers, specifically: blower heater non-purge (BHNP) with and without cooling water pumps, Compressed-air Heater Purge (CHP), Blower Heater Purge (BHP), and Pressure Swing Heaterless (PSH). These styles of dryers are used mainly in industries that require extremely dry air such as, food manufacturing, medical air, or sensitive technology manufacturers. The research was conducted by collecting and analyzing real time current draw data on air compressors and associated dryers at eight different facilities (13 compressor systems) …

Factors Influencing Household Solar Adoption In Santiago, Chile, Jeffrey P. Walters, Jessica Kaminsky, Claudio Huepe

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

In Santiago, Chile, the market conditions are seemingly excellent for the household adoption of photovoltaic (PV) technology, yet the uptake is negligible. To explore this paradox, the authors conducted a Delphi study to solicit the knowledge of a panel of Chilean PV experts. These efforts yielded 26 factors—both motivations and barriers—impacting the diffusion of PV in Santiago. Of the 26, experts were in consensus on the relative importance of 21. The literature suggests that diffusion of PV technologies is influenced by complex technical, economic, and social factors. Similarly, the experts saw influence from financial, environmental, and energy supply (e.g., electrical …

Communication Based Control For Dc Microgrids, Mahmoud S. Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

Centralized communication-based control is one of the main methods that can be implemented to achieve autonomous advanced energy management capabilities in DC microgrids. However, its major limitation is the fact that communication bandwidth and computation resources are limited in practical applications. This can be often improved by avoiding redundant communications and complex computations. In this paper, an autonomous communication-based hybrid state/event driven control scheme is proposed. This control scheme is hierarchical and heuristic, such that on the primary control level, it encompasses state-driven local controllers, and on the secondary control level, an event-driven MG centralized controller (MGCC) is used. This …

Answering Food Insecurity: Serving The Community With Food And Knowledge Using Technology, Courtney Simpson

Purdue Journal of Service-Learning and International Engagement

The courses of Tech120, CGT110, and ENGT 180/181 and Red Gold at Purdue collaborated to design a robot that would plant and water a garden for a local community charter school. The students centered the project on the users’ needs for fresh food, nutrition education, and early exposure to STEM for children. The school, Anderson Preparatory Academy (APA), is comprised of many children who come from low-income families and are in the free or reduced lunch program. Inspired from “Farm Bot,” a similar system that allows for almost hands-free gardening, the “Boiler Bot” is designed to be scalable so children …

Cyber-Physical System Characterization And Co-Regulation Of A Quadrotor Uas, Seth E. Doebbeling

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

An Unmanned Aircraft System (UAS) is a Cyber-Physical System (CPS) in which a host of real-time computational tasks contending for shared resources must be cooperatively managed to obtain mission objectives. Traditionally, control of the UAS is designed assuming a fixed, high sampling rate in order to maintain reliable performance and margins of stability. But emerging methods challenge this design by dynamically allocating resources to computational tasks, thereby affecting control and mission performance. To apply these emerging strategies, a characterization and understanding of the effects of timing on control and trajectory following performance is required. Going beyond traditional control evaluation techniques, …

Built-In Bicycle Rack For Cars, Scott A. Hansberry

All Undergraduate Projects

Transporting a bicycle after riding somewhere and then needing to be pickup can be problematic. Bicycles will not fit in most vehicles without removing components. There is also the risk of damaging the inside of the vehicle. Expecting everyone to have a bike rack for their vehicle is unrealistic because the bike rack could be considered unappealing visually, take up to much space in the trunk, or limit the vehicle owner’s access to the trunk. The solution to this problem is a bike rack that mounts onto your car and then mounts your bike onto the rack. Most people don’t …

Target Read Operation Of Passive Ultra High Frequency Rfid Tag In A Multiple Tags Environment, Zi Qin Phua

Theses and Dissertations--Mechanical and Aerospace Engineering

Passive ultra-high frequency (UHF) radio frequency Identification (RFID) has emerged as a promising solution for many industrial applications. Passive UHF systems are relatively inexpensive to implement and monitor, as no line of sight is required for the communication. There are several advantages to using a passive RFID system. For example, no internal power source is required to activate the tags, and lower labor costs and efficient multitasking operations are expected in a long term scenario. However, due to factors such as tag-to-tag interference and inaccurate localization, RFID tags that are closely spaced together are difficult to detect and program accurately …

A Retrospective Study Of Amusement Ride Restraint And Containment Systems: Identifying Design Challenges For Statistically Rare Anthropometric Cases, Paula M. Stenzler

Engineering Management & Systems Engineering Theses & Dissertations

The intent of this project was to conduct a retrospective study of amusement ride restraint and containment systems’ failures to identify the challenges associated with existing design criteria to safely accommodate statistically rare groups that fall outside amusement industry standards. Innovations in ride technology provide an opportunity for injuries to occur if restraint and containment systems cannot properly accommodate unique patron anthropometry. It is paramount to understand how anthropometric features contribute to the patron’s ability to defeat ride restraint and containment systems. A systemic perspective was used based on industry accident data to frame the problem associated with restraint and …

Modeling Social, Economic, Technical & Environmental Components In An Energy System, Ange-Lionel Toba, Mamadou Seck

Engineering Management & Systems Engineering Faculty Publications

Energy system models have become the main supporting tool for energy policy. Modern challenges in energy policy require energy systems models that integrate technical, environmental and societal aspects of the energy systems. In this paper, we introduce a conceptual model for an energy system model that specifies the relationships between social, technical, environmental, and economic aspects of an energy system. This conceptual model presented in the IDEF0 language will serve as a basis for a computational energy systems model. © 2016 The Authors.

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

LSU New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Solar Cal Poly Active Hvac Project, James Cornish, Jake Cosmo, Patrick Weston

Mechanical Engineering

For this project, the goal was to conceptualize, design, test, and implement an active HVAC system to be used in the Solar Cal Poly house competing in the Department of Energy’s 2015 Solar Decathlon. With many house iterations, it was decided to use a split system with an outdoor heat pump and indoor air handler, paired with a HRV for ventilation. Through system modeling using Design Builder and Energy Pro 6.5, the cooling load of the house was determined along with the cooling schedule. The foreseen safety precautions and limited construction time guided the entire project, along with the active …

Creating A User-Friendly Personal Wine Collection Inventory Management System, Peter Loddengaard

Industrial and Manufacturing Engineering

This project set out to create a user-friendly wine collection management software. Existing systems were reviewed and discussions with collectors took place to establish the user requirements for this type of inventory management system. This led to the scope of the project being narrowed to making a wine bottle entry form that was quick and easy to use. The programming language, Ruby on Rails, was used to design this system, and learning the software was a large part of the project itself. It was established that four forms would be designed using combinations of two ergonomic factors: an “F” shaped …

Frito-Lay - Supply Chain Impact Analysis, Kerri Blosch, Vincent Phua, Jeffrey Silva

Industrial and Manufacturing Engineering

The snack food company Frito-Lay relies on Route Sales Representatives (RSRs) to stock and maintain shelves of snack foods in every store. Frito-Lay currently does not have a system which can accurately predict cannibalization, or the effects of a store opening or closing on other stores of the same chain in the area. The goal is to sort through 1900 stores in a given metropolitan area to see the effects of cannibalization. In order to tackle the problem, a Microsoft Access program was created to filter stores based on location or whether the store was open for the full three-year …

Process Testing And Improvement Of Tapping Machinery At Lisi Aerospace, Michael James Hester

Industrial and Manufacturing Engineering

This report documents my senior project for California Polytechnic State University San Luis Obispo. I have chosen to do a senior project with Lisi Aerospace. Lisi would like to compare the manufacturer rated cycle count of taps versus an experimental one based on our machines in house. My goal for this project would be to run an experiment on one tapping machine and report on the achievable cycle count for the taps. I plan to do this in several ways including:

• Running extra cycle counts above tap manufacturer recommendations

• Documenting machine failure modes

• Create a process document to be repeated …

  ---

  Go to article

Improving Advertisement Recognition And User Interface Of Gameofwarrealtips.Com, Chad Kihm, Alexander Meyer

Industrial and Manufacturing Engineering

The purpose of this experiment was to determine which location of advertisement would be the most recognized on the Game of War Real Tips website and to improve the website’s user interface by using both quantitative and qualitative data. To accomplish this, two experiments were created. The first experiment was designed to determine which location of advertisement would be recognized most by users. A screen would flash for 0.5 seconds and the subjects would mark where they believed they recognized an advertisement. A statistical analysis was completed to determine whether the location of the advertisement had an effect on the …

Wine Club Shipment Package Redesign, Emily E. Prescott

Industrial and Manufacturing Engineering

This report shows the design, manufacturing, and testing process for the product development of a wine club shipment package for Niner Wine Estates. Niner has two different shipment sizes, 4 bottles and 6 bottles, and wishes to improve their current package by giving it a more “high-class” feel. After the new package was designed and prototyped, it went through standardized quality testing to be cleared for commercial use. This testing is intended to simulate the distribution cycle the package will experience and subject it to potential hazards such as being dropped and vehicle vibration during transportation.

After the package passed …

A Framework For Sustainable Material Selection For Multi-Generational Components, Ryan T. Bradley

Theses and Dissertations--Mechanical and Aerospace Engineering

The early stages of a product’s design are a critical time for decisions that impact the entire life-cycle cost. Product designers have mastered the first generation; however, they currently do not have the ability to know the impact of their decisions on the multi-generational view. This thesis aims at closing the gap between total life-cycle information and the traditional design process in order to harbor sustainable value creation among all stakeholders involved. A framework is presented that uses a combination of a life-cycle costing methodology and an evolutionary algorithm in order to achieve a sustainability assessment for a true multi-generational …

Methane Production By A Packed-Bed Anaerobic Digester Fed Dairy Barn Flush Water, Sean Richard Thomson

Master's Theses

Packed-bed digesters are an alternative to covered lagoon digesters for methane production and anaerobic treatment of dilute wastewaters such as dairy barn flush water. The physical media of packed-beds retain biofilms, often allowing increased treatment rates. Previous studies have evaluated several types of media for digestion of dilute wastewaters, but cost and media fouling have setback commercial development. A major operational cost has been effluent recirculation pumping.

In the present effort, a novel approach to anaerobic digestion of flush dairy water was developed at pilot-scale: broken walnut shells were used as a low-cost packed-bed medium and effluent recirculation was replaced …

2d Wireform Process Improvement, Katy Conlin, Carlo Ebora, Jordan Gamble

Mechanical Engineering

The body of this work has been created for Edwards Lifesciences in conjunction with senior project requirements. As such, the information produced and contained within is under a non‐disclosure agreement. As per request by sponsor, the body of the work will not be submitted to any outside parties, and the title page will serve as proof of completion.

Lean Fire Management: A Focused Analysis Of The Incident Command System Based On Toyota Production System Principles, Jeremiah S. Fugate

Theses and Dissertations--Mechanical and Aerospace Engineering

A primary role of the Incident Command System is to learn from past incidents, as illustrated by its origins in the wildland firefighting community. Successful emergency response operations under the Incident Command System has prompted its nationwide spread, this promulgation critically relies on the system’s capability to stabilize and continuously improve various aspects of emergency response through effective organizational learning. The objective of this study is to evaluate the potential to apply fundamental principles of the Toyota Production System (Lean manufacturing) to improve learning effectiveness within the Incident Command System. An in-depth review of literature and training documents regarding both …

Neuromodulation Based Control Of Autonomous Robots On A Cloud Computing Platform, Cameron Muhammad

College of Graduate Studies: Theses & Dissertations

In recent years, the advancement of neurobiologically plausible models and computer networking has resulted in new ways of implementing control systems on robotic platforms. The work presents a control approach based on vertebrate neuromodulation and its implementation on autonomous robots in the open-source, open-access environment of robot operating system (ROS). A spiking neural network (SNN) is used to model the neuromodulatory function for generating context based behavioral responses of the robots to sensory input signals. The neural network incorporates three types of neurons- cholinergic and noradrenergic (ACh/NE) neurons for attention focusing and action selection, dopaminergic (DA) neurons for rewards- and …