Other Operations Research, Systems Engineering and Industrial Engineering Commons^™

Optimisation Methods In Supply Chain Applications: A Review, Amr Arisha, Waleed Abo Hamad

Conference papers

The competitiveness and dynamic nature of today’s marketplace is due to rapid advances in information technology, short product life cycles and the continuing trend in global outsourcing. Managing the resulting supply chain networks effectively is a complex and challenging task which is imputable to high level of uncertainty in supply-demand, conflict objectives, vagueness of information, numerous decision variables and constraints. With such level of complexity in the environment, supply chain optimisation has a potential to make a significant contribution to resolve the challenges. In this paper, a literature review – based on more than one hundred peer-reviewed articles – of …

Design Of An 8-Channel Data Acquisition System For Measuring Diode Junction Temperature, Jason Maynard

Industrial and Manufacturing Engineering

The solid state lighting industry is striving to expand the use of light emitting diodes (LEDs) in more applications, particularly in high brightness applications. As the power of LEDs increase, heat removal becomes a critical issue. To improve device lifetime, quantum efficiency, and LED colour, the diode p-n junction temperature (Tj) must be kept to a minimum. Measuring this key parameter is difficult or impossible with direct methods, such as thermocouples and infrared cameras, due to the small size of LEDs. Fortunately, junction temperature can be measured indirectly by using a relationship between the diode forward voltage (Vf) and junction …

A Decision Support System For Capacity Management, Anton Slobodnik

Industrial and Manufacturing Engineering

Every manufacturer faces the challenge of managing production capacity. How effectively a company meets required capacity as compared to competitors will be a determinant of profitability and success.

This paper details the creation of a best of breed software that can act as a decision support system and help planners reschedule work, add shifts and make sure that the master production schedule is feasible before putting it into an MRP system.

As a part of my senior project I’ve created a Rough-Cut Capacity Tool that takes lead time into account and performs basic what if analysis on level loading a …

Rubric For Presentation Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow classmates and myself to offer an evaluation or assessment of a student classroom presentation. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Project Report Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to formalize the evaluation or assessment of a project report. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Project Self-Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow each member of a project team to offer a self-assessment of their own performance on the projects. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Ruberic For Project Team Member Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow team members for course projects to offer an evaluation or assessment of the fellow members of their team. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Optimization Of Lifeguard Towers, Equipment, And Sign Placement With Human Factors Considerations For The Cal Poly Recreation Center Expansion, Brian J. Henrikson

Industrial and Manufacturing Engineering

Cal Poly’s Recreation Center serves many faculty, students and alumni by providing them with a safe and fun environment to work out and swim. An overwhelming majority of students voted for a Recreation Center expansion to handle the increased usage of the Center over the past few years. The focus of this report is the safe and effective operations of the pool deck and the lifeguard staff. Three surveys were created to see what the lifeguard staff, as well as pool users, thought about the current pool deck and what they would like to see in the new pool deck …

Randomly Generating Manufacturing Flow Line Models Using Mathematica, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

To test heuristic algorithms and techniques, researchers need numerous datasets so as to measure effectiveness and improve approaches. This paper discusses using Mathematica, a mathematical programming language, for randomly generating the specifications for manufacturing flow line models. Important issues include determining an arrival rate to a flow line, the number of flow line stations, the number of parallel servers for each production station, and specifying the service time distributions and their associated parameters. The paper concludes with a discussion on generating more general types of simulation models.

Simulation Of Multicultural Factors In Terrorism Networks, Jared Townsley

Industrial Engineering Undergraduate Honors Theses

As globalization extends its influence to the far corners of the world, rapid developments and changes are taking place economically, socially, and environmentally. Cultural differences between and within organizations have become significant during the past few years as politics and marketplaces expand globally to include multiple nationalities, beliefs, and value systems. Unfortunately, terrorism has also felt the effects of globalization as organizations such as Al-Qaeda seek to expand their influence worldwide. Although a considerable amount of research has been conducted to identify key cultural factors that play major roles within organizations, simulation models that attempt to quantify cultural effects are …

Details And Description Of Operations Research, Paul Savory

Department of Industrial and Management Systems Engineering: Reports

The ambiguous term operations research was coined during World War II. A frequent substitute is management science. Operations research is a scientific approach to analyzing problems and making decisions. It uses mathematics and mathematical modeling on computers to forecast the implications of various choices and zero in on the best alternatives. This content paper provides an overview of operations research. It highlights operations research problems, methods for solving problems, different areas of operations research, and example problems.

Pre/Post Assessment Of Abilities, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

One approach to assess if students are learning in a course is to conduct a pre-test, post-test assessment of the course material. By comparing the two results, one can make an assessment of the knowledge learned in the course. For certain types of courses, it can be a challenge in defining an assessment instrument that measure student knowledge. This example is one I have developed for my IMSE 440/840 (Discrete Event Computer Simulation) course. Students are asked rate their ability for key course objectives defined on the course syllabus. I administer it on the first day of the course and …

Process Modelling Support For The Conceptual Modelling Phase Of A Simulation Project, Cathal Heavey, John Ryan

Conference papers

While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the conceptual modelling phase. Several authors have reported the advantages of using process modelling tools in the early phases of a simulation project.

This paper provides an overview of process modelling tools in relation to their support for simulation, categorizing the tools into formal method and descriptive methods. A conclusion from this review is that none of the tools available adequately support the requirements gathering phase of simulation. This is not surprising as none of the process modelling …

Process Modeling For Simulation, John Ryan, Cathal Heavey

Articles

This paper discusses shortfalls in relation to the requirements gathering phases of simulation. While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the requirements gathering phase. This is surprising as it has been reported by several researchers that the requirements phase can absorb twice as much resources as the coding phase. There are numerous process modeling tools available (over 100) that can and have been used to support the requirements phase of simulation. This paper provides a selective review of some of the most important in relation …

Class Exercise For Assessing Abilities And Providing A Structure For A Course, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I developed this class exercise to assess students abilities and to highlight the range of questions/issues that they will learn in my IMSE 440/840 (Discrete Event Computer Simulation) course. I draw a picture of the case scenario for students and explain the system’s operation to them. I then ask that they complete the questions regarding the system and/or how they would analyze it. Following class, I develop a summary of the range of student answers. At the next class session, I share the range of answers and share what my answers would be and how these questions/topics relate to what …

A Template-Based Data Specification Framework For Modeling Physical Security Systems, Ashu Guru, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Simulation studies often fail to provide any useful results due to its success being highly dependent on the skills of the analyst to understand a system and then correctly identify all the required data parameters and dependent variables. This paper describes a template-based framework to help identify and specify the components and data parameters for developing models of physical security systems. The layered framework consists of fifteen templates built on top of fourteen data primitives representing 119 data parameters. The modeling framework has been programmed as an internet-based web application and is simulation language independent. The usefulness of the framework …

Requirements Gathering For Simulation, John Ryan, Cathal Heavey

Conference papers

This paper discusses the current shortfalls in support for the pre-coding phases of a discrete event simulation project. The paper then presents a process modelling technique, Simulation Activity Diagrams (SADs), developed to specifically support the initial requirements gathering phases of a simulation project. The paper concludes with an outline of proposed future developments to the modelling technique.

Development Of A Process Modelling System For Simulation, John Ryan

Other resources

This thesis details the development of a process modelling technique to aid a simulation model developer during the requirements gathering and conceptual modelling phases of a simulation project.

There are a number of process modelling techniques available that are capable of being used during such phases of a simulation project, however there is currently a lack of process modelling techniques developed specifically to aid a simulation model developer in capturing, representing and communicating information and systems issues to persons involved in the operation of discrete systems under investigation.

A detailed review of the literature related to techniques capable of supporting …

Intelligent Simulation-Based Lot Scheduling Of Photolithography Toolsets In A Wafer Fabrication Facility, Amr Arisha, Paul Young

Conference papers

Scheduling of a semiconductor manufacturing facility is one of the most complex tasks encountered. Confronted with a high technology product market, semiconductor manufacturing is increasingly more dynamic and competitive in the introduction of new products in shorter time intervals. Photolithography, being one of the processes repeated often, is a fabrication bottleneck. Lot scheduling within photolithography is a challenging activity where substantial improvements in factory performance can be made. The proposed scheduling methodology integrates two common approaches, simulation and artificial intelligence. Using detailed simulation modeling within a structured modeling method, a comprehensive model to characterize the photolithography process was developed. An …

A Case Study Of Teaching A Quantitative Course Using Archived Streaming Video, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This case study highlights some of the issues and difficulties experienced in teaching a quantitative course using three methods of delivery: in-class to an audience of students, television broadcast over a satellite system to distance students, and archived streaming video accessible by students. The discussion is applicable to administrators and faculty exploring the option of teaching a course using multiple delivery approaches.

A Template-Based Conceptual Modeling Infrastructure For Simulation Of Physical Security Systems, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Although simulation is one of the most innovative and cost-effective tools for modeling and analyzing a system, simulation studies often fail to provide any useful results. One reason is attributed to the fact that model formulation depends on the skills of the analyst. This paper describes a research to develop a conceptual modeling infrastructure to assist a simulation analyst in specifying components for studying physical security systems. The modeling framework has been programmed as an internet-based web application. Using the application, the successful development and implementation of a physical security simulation model will be aided by a defined scientific methodology …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Simulation Activity Diagrams, John Ryan, Cathal Heavey

Conference papers

This paper presents a technique, Simulation Activity Diagrams (SAD), developed to lessen the modelling burden during the initial requirements gathering phases of a simulation project. The technique also allows the capture and visual communication of detailed information, to manufacturing personnel, which may otherwise be lost in detailed programming code.

The Quality Problem Solving Method And Its Effectiveness At Nortech Inc., Jeffrey Henderson

Honors Capstones

Capstone submitted as a graduation requirement for the BSU Honors Program.

A Simulation Based Experiment For Comparing Amhs Performance In A Semiconductor Fabrication Facility, Gerald Mackulak, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

As the cost and complexity of constructing a semiconductor fabrication facility increases, responsive tools are needed for designing and planning its operations. Discrete-event simulation paired with design of experiments is an effective combination. This article demonstrates how simulation in combination with design of experiments is used to compare the intrabay layout of two automated material handling systems. The difference in stocker robot utilization, number of vehicle moves per hour, and average delivery time for the two intrabay layouts will be compared using a fractional factorial experimental design. The study demonstrates that the distributed storage option is preferable for maximizing manufacturing …

Combining Activity-Based Costing With The Simulation Of A Cellular Manufacturing System, Paul Savory, Robert Williams, Rodney Rassmuseun

Department of Industrial and Management Systems Engineering: Faculty Publications

This paper presents an integrated simulation and activity-based management approach for determining the best sequencing scheme for processing a part family through a manufacturing cell. The integration is illustrated on a loop or U-shaped manufacturing cell and a part family consisting of four part types (A, B, C, and D). Production requirements for the cell demand that part batches be processed one type at a time. For example, all part A’s are processed until weekly demand is met, then part B’s, etc. The objective of this example is to determine the best part sequence (e.g., ABCD, DCBA or CABD). In …

Combining Activity-Based Costing With The Simulation Of A Cellular Manufacturing System, Paul Savory, Robert Williams, Rodney Rassmuseun

Department of Industrial and Management Systems Engineering: Faculty Publications

Discrete-event simulation is one of the most effective techniques for analyzing a manufacturing system. Unfortunately, little attention is given to using simulation models to estimate the economic impact of a proposed system configuration. This paper defines how activity-based costing (ABC) concepts can be incorporated into a discrete-event simulation model. Special emphasis is on demonstrating how decision making can be aided by having the simulation create a detailed “Bill of Activity” describing costs associated with manufacturing a part. The integration of ABC and simulation is illustrated by evaluating the impact of a proposed manufacturing cell configuration. The additional costing information aids …

Guidelines For Using Process Mapping To Aid Improvement Efforts, Paul Savory, John R. Olson

Department of Industrial and Management Systems Engineering: Faculty Publications

Process mapping is an easy-to-visualize method for people to analyze and agree on the most efficient routes for reengineering or improving a process. It aids in determining redundant tasks, uncovering hidden interactions between processes and people, and focusing on the processes that serve customers, improve quality, and generate income. This paper presents guidelines for using process mapping as an improvement tool. It is based on the authors’ experiences in aiding a variety of healthcare, service, and manufacturing companies.

A Web-Based Interface For Storing And Executing Simulation Model, Ashu Guru, Paul Savory, Robert Williams

Department of Industrial and Management Systems Engineering: Faculty Publications

The dominance of the Internet in the development ofinformation and communication technology has madeWeb-based distributed solutions increasingly attractive.Apart from providing other services, the World Wide Webis being looked upon as an environment for hostingmodeling and simulation applications. SIMAN is asimulation language that allows users to simulate discreteand continuous systems. In this research, a web-basedinterface or toolkit has been developed for storing andexecuting SIMAN simulation models over the Internet.This toolkit consists of a World Wide Web interface toSIMAN and a web-accessible database for storing usermodels. It provides users an easy-to-use environment fordeveloping text-based simulation models using the SIMANsimulation language. It also …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …