Operational Research Commons^™

Reverse Decision Making And Goal Attainment A Proof Of Concept As A New Approach To The Decision Making Process Under Uncertainty, Shitalkumar S. Sabne

Engineering Management & Systems Engineering Theses & Dissertations

Decision making occurs when one must choose among alternatives. However, in uncertain environments where problems are complex and decision makers lack complete knowledge of the situation as well as decision alternatives, it's not possible for them to select an optimal decision outcome by 'Traditional Decision Approaches'. At present Reverse Decision Making is the central, although new and unproved, approach of Old Dominion University's Engineering Management and Systems Engineering research on decision making process for uncertain and complex situations. Even though research in decision making spans over one hundred years, there are still important problems which remain to be addressed.

There …

An Empirical Investigation Into The Relationships Between Emotional Intelligence, Use Of Knowledge Transfer Methods, And Project Performance, Brent Michael Decker

Engineering Management & Systems Engineering Theses & Dissertations

Increasingly, the use of project teams is becoming commonplace within organizations as the primary means to accomplish complex tasks. While the literature has long acknowledged that the knowledge transfer process is a key component in achieving organizational success and ultimately sustaining a competitive advantage, very little has been written that specifically examines the knowledge transfer process at the project team level. In an attempt to increase the understanding of knowledge transfer processes at the project team level, the effect that a relatively new construct, termed emotional intelligence, has on the use of knowledge transfer methods is examined. The relationships between …

The Reflective Mariner An Approach For Ecdis Training And Operational Usage, Scott W. Muller

Computational Modeling & Simulation Engineering Theses & Dissertations

The emergence of the Electronic Chart Display and Information System (ECDIS) on the bridge of modem vessels offers the possibility of improving the safety and efficiency of maritime operations. Despite its benefits, improper use of ECDIS relegates the watch officer to passive monitoring, which in tum places the mariner "out of the control loop" in the assessment of vessel control functions and equipment malfunctions. It is therefore vital to train mariners to be active in their ECDIS monitoring. This thesis presents a training strategy aimed at developing the "Reflective Mariner": an approach to help mariners maintain their active use of …

The Analytic Hierarchy & The Analytic Network Processes In Multicriteria Decision Making: A Comparative Study, Ali K. Taslicali

Engineering Management & Systems Engineering Theses & Dissertations

The objective of this investigation is to identify the critical benefits and factors of decision making models in a changing technological environment. Decision making models are helping tools for the managers or decision makers to make future plans by using qualitative or quantitative data. In this research, a general idea about decision making models and, comparison between the two important models, the Analytical Hierarchy Process (AHP) and the Analytical Network Process (ANP), are introduced. The research was done by using the information in the literature and expert judgment. This paper can be used by academics as a foundation for further …

Crisis Management In Projects, Senol Nazikkol

Engineering Management & Systems Engineering Theses & Dissertations

The objective of this investigation is to identify the processes, benefits and important tools of crisis management in projects. Crisis management is a system that helps managers to prevent and overcome crises. In this research, a general review about crisis, crisis management processes and tools are discussed. The research was done by using the information in the literature and expert judgment. This paper can be used by academics as a foundation for further research and development in the area of crisis management in projects. Managers of projects can use this study for improving their projects and project-based organizations' crisis management …

A Dyadic Composition To Foster Virtual Team Effectiveness: An Experimental Study, Gamze Karayaz

Engineering Management & Systems Engineering Theses & Dissertations

The importance of effectiveness for virtual teamwork continues to gain momentum as technology and globalization of work accelerate. The implementation of virtual teams provides one approach to enhance competitiveness, overcoming the disadvantages of space and time differences through collaborative technologies. The influence of structure to virtual team performance has not been clearly established in the literature. The purpose of this research study was to investigate the effectiveness of a dyad structured approach for virtual teams using a quasi-experimental research design.

This research investigated four questions related to the influence of structure on virtual team effectiveness related to task performance, communication …

Quantifying Vulnerability To Critical Infrastructure, Barry Charles Ezell

Engineering Management & Systems Engineering Theses & Dissertations

Military and civilian leaders have the responsibility to protect our Nation's critical infrastructure, communities, and symbols of American power from terrorists, home and abroad, as well as from natural disasters. To this end, assessments are conducted to reduce vulnerability. The literature offers multiple definitions of vulnerability and measurement has not been adequately addressed. Thus, the purpose of this research has been to develop and deploy a systems-based model that quantifies vulnerability to critical infrastructure. This research defines critical infrastructure vulnerability as a measure of the susceptibility of critical infrastructure to threat scenarios. Vulnerability is a function of (1) threat scenario, …

A Systems Methodology For Measuring Operational Organization Effectiveness: A Study Of The Original Equipment Computer Manufacturing Industry, 1948 To 2001, Teddy Steven Cotter

Engineering Management & Systems Engineering Theses & Dissertations

Optimizing operational organizational effectiveness is the central, although often unstated, goal of engineering management and systems engineering research and applications. Two fundamental problems remain to be addressed in pursuit of this goal. First, despite over fifty years of research in various disciplines, there is still no universally accepted definition of organizational effectiveness. Second, no methodology exists to identify the domains, dimensions, and determinants of operational organizational effectiveness and dynamically model operational organizational effectiveness within a given population.

This research synthesizes a systems engineering methodology for identifying the domains, dimensions, and determinants of and dynamically modeling operational organizational effectiveness for an …

Production Research In China, S. Chaudhry, S. Feng, H. Li, H. Sui, J. L. Zhang, Z Zhang, Li Xu

Information Technology & Decision Sciences Faculty Publications

(First paragraph) China is the world’s largest emerging economy. In recent years, China has moved to an increasingly market-oriented economy that opens to international trade and investment. At the same time, the popularity of China as a manufacturing base, assembling goods for sale worldwide is growing. In addition to global manufacturers who have built their own plants in China, many manufacturing companies are outsourcing production to Chinese subcontractors and branding the products with their own logos. In today’s China, production research is becoming more and more important; advanced production research becomes an important enabler to make its manufacturing industry competitive. …

Multi-National Project Team Communications And Cultural Influences, Morgan E. Henrie

Engineering Management & Systems Engineering Theses & Dissertations

This exploratory case study dissertation examined multinational project teams' communication satisfaction as influenced by the project team's cultural attribute of power distance. Utilizing a exploratory case study, semi-guided interview research approach, ordinal scale data and open-ended contextual based question responses was obtained. This data was gathered from United States---Russia and Canada---Angola multi-national, complex, high technology oil transportation project teams. Triangulation data gathering techniques were utilized to obtain empirical data from multiple sources of data and multiple data types. Subsequent data analyses combined descriptive statistical analysis, graphical analysis, cluster analysis, and content analysis techniques to derive a theoretical construct of multi-national …

Application Of Queuing Theory And Procedure Time Estimation In A Local Healthcare System, Galina Tsoy

Engineering Management & Systems Engineering Theses & Dissertations

People in the United States pay more for their basic healthcare needs than do people in any other nation in the world. When we consider that the United States is the wealthiest nation in the world, controlling the majority of the world's resources, it seems only reasonable to ask: Why should it be this way?

In an effort to address this problem, this thesis examines two possible methods of improving health care efficiency in hospitals. The thesis is thus in two parts: the first part examines resource allocation in medical units using Queuing Theory, and the second part examines a …

Writing Reflective Case Studies For The Engineering Management Journal (Emj), Timothy Kotnour, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

This paper's intent is to help authors write reflective case studies for the Engineering Management Journal (EMJ). We offer a process to convert an applied research project with an organization to an EMJ manuscript. Writing a reflective case study is a process of abstracting experiences into approaches, processes, tools, challenges, and "lessons" for a broad audience of engineering managers. This paper serves as a guide for authors to write reflective case studies.

Enhancing Instruction In Lean Manufacturing Through Development Of Simulation Activities In Shipbuilding Operations, Alok K. Verma, James Hughes, Scott Christman

Engineering Technology Faculty Publications

Lean Manufacturing is a powerful philosophy that advocates minimization of waste within an organization. The adoption of Lean Manufacturing philosophy by major manufacturers has created a demand for qualified personnel in this area. A training program in Lean Enterprise was developed by Old Dominion University for the Apprentice School at Northrop Grumman Newport News. Physical simulation activities are an integral part of this training program. Simulation activities related to shipbuilding operations have been incorporated in the Lean training course. These activities have been used in the Business Operations course for three semesters. Results show increased student participation and better understanding …

Information System Product Development By Integration Of Kano's Customer Satisfaction Model With Quality Function Deployment, Afife Yesim Sireli

Engineering Management & Systems Engineering Theses & Dissertations

Product development of complex, innovative information technology related systems presents difficult challenges for technology managers, and new product failures are a significant problem. The main reason for this is insufficient decision-making due to the lack of a customer-oriented product development process in the information system (IS) companies, which is often related to deficiencies in cooperation between R&D and marketing departments. Integrating consumer requirements into the product design phase is an important factor for improving market success. Therefore, a product development decision model is needed for the managers of information system companies to make more accurate decisions about the characteristics of …

Optimization-Based Architecture For Managing Complex Integrated Product Development Projects, Hisham Mohamed El-Sayed Abdelsalam

Mechanical & Aerospace Engineering Theses & Dissertations

By the mid-1990's, the importance of early introduction of new products to both market share and profitability became fully understood. Thus, reducing product time-to-market became an essential requirement for continuous competition. Integrated Product Development (IPD) is a holistic approach that helps to overcome problems that arise in a complex product development project. IPD emphasis is to provide a framework for an effective planning and managing of engineering projects. Coupled with the fact that about 70% of the life cycle cost of a product is committed at early design phases, the motivation for developing and implementing more effective methodologies for managing …

Development Of A Multicriteria Spatial Decision Support System With Application To The Economic Optimization Of Aircraft Based Weather Data Collection, Ganzague Erol Osman Ozan

Engineering Management & Systems Engineering Theses & Dissertations

This research is motivated by the economic optimization of the Troposherical Airborne Meteorological Data Reporting (TAMDAR), an aircraft-based meteorological data collection system. In the envisioned TAMDAR system, meteorological data collected by the onboard sensors of selected aircraft are transmitted to the ground as aircraft fly their missions. The data is processed by a national center, which disseminates the data to diverse users such as weather forecasters and aviation control centers. Substantial government funding is required for the implementation and operation of this new data acquisition system and data transmission expenditures constitute the largest portion of the costs. To achieve economic …

Nato Code Of Best Practice For C2 Assessment, Dave Alberts, Tim Bailey, Paul Choinard, Andreas Tolk, Gary Wheatley, John Wilder

Computational Modeling & Simulation Engineering Books

This major revision to the Code of Best Practice (COBP) for C² Assessment is the product of a NATO Research and Technology Organisation (RTO) sponsored Research Group (SAS-026). It represents over a decade of work by many of the best analysts from the NATO countries. A symposium (SAS-039) was hosted by the NATO Consultation Command Control Agency (NC3A) that provided the venue for a rigorous peer review of the code. This new version of the COBP for C² assessment builds upon the initial version of the COBP produced by SAS-002. The earlier version focused on the analysis of …

Object-Oriented Architecture For Concurrent Processes In A Port Simulation, Reejo Mathew

Electrical & Computer Engineering Theses & Dissertations

An architectural model to represent the resources and infrastructure within a cargo terminal, as well as to support the concurrent but opposite flow of cargo within the terminal, is presented in this thesis. The model supports the configuration of an individual cargo terminal according to its characteristics, as well as the processing involved in the simultaneous flow of cargo in opposite directions through the terminal. This is useful in the analysis of the flow of military cargo and aids the decision-making process to increase the efficiency and throughput of any military operation. This model has been developed with the aim …

Determination Of The Impact Of A Human Capital Decision Cost Model On The Economic Performance Measures Of A Technical Services Company, Jeffery A. Temple

Engineering Management & Systems Engineering Theses & Dissertations

Human Capital has a major impact on cash flow management decisions in a Technical Services company. Decisions to hire or terminate employees to meet contract requirements affect the company's economic value. The objective of this research is to develop a model that assists management in establishing a starting point in making, as efficiently as possible, those decisions that impact employees' lives. To understand that impact, the operations and economic parameters of a Technical Services company are compared with those of a manufacturing company. This analysis establishes two · essential points for Technical Services organizations; first, that the capital investment decision …

A Model To Evaluate The Effect Of Organizational Adaptation, Holly A. H. Handley, Alexander H. Levis

Engineering Management & Systems Engineering Faculty Publications

When an organization’s output declines due to either internal changes or changes in its external environment, it needs to adapt. In order to evaluate the effectiveness of different adaptation strategies on organizational per- formance, an organizational model composed of individual models of a five stage interacting decision maker was designed using an object oriented design approach and implemented as a Colored Petri net. The concept of entropy is used to calculate the total activity value, a surrogate for decision maker workload, based on the functional partition and the adaptation strategy being implemented. The individual decision maker’s total activity is monitored, …

A Study Of Financial Analysis Expectations And Practices In The Engineering Management Workplace, Paul Kauffmann, Resit Unal, Andres Sousa-Poza, William Peterson

Engineering Management & Systems Engineering Faculty Publications

This paper describes an on-going study of Master of Engineering Management (MEM) students and the financial analysis related job expectations and environment they face. The objective of this effort is to provide enhanced understanding of these requirements so that instructional content in the related courses can be focused to meet these needs. To achieve this goal, the study segments findings based on a range of organizational and job level characteristics to identify critical differences in the financial work environment and the financial tools that are employed. Preliminary findings are discussed in this paper and contrasts between public and private sector …

Routing Optimization Through Computer-Aided Simulation, Madhusudhan Akundi

Electrical & Computer Engineering Theses & Dissertations

Routing has always been a challenging field, and the various techniques of mathematics and operations research have been developed. For commercial organizations, routing has begun to receive extensive attention because of the savings gained in terms of time, money, personnel, and the transportation fleet by developing optimized routing networks. Until recently, it was difficult to develop optimized networks due to the computational difficulties of the problem. However, with the advancement in computer technology and processing speeds, it has become possible to simulate a large number of routing scenarios and determine optimal solutions for a given set of constraints. Not only …

An Integrated Engineering-Computation Framework For Collaborative Engineering: An Application In Project Management, Hisham Mohamed El-Sayed Abdelsalam

Mechanical & Aerospace Engineering Theses & Dissertations

Today's engineering applications suffer from a severe integration problem. Engineering, the entire process, consists of a myriad of individual, often complex, tasks. Most computer tools support particular tasks in engineering, but the output of one tool is different from the others'. Thus, the users must re-enter the relevant information in the format required by another tool. Moreover, usually in the development process of a new product/process, several teams of engineers with different backgrounds/responsibilities are involved, for example mechanical engineers, cost estimators, manufacturing engineers, quality engineers, and project manager. Engineers need a tool(s) to share technical and managerial information and to …

A Systems-Based Methodology For The Construction And Representation Of Organizational Knowledge Systems, Willie James Mcfadden

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems-based, analysis methodology which constructs and represents an organization's knowledge system. The research inquiry was guided by four questions: (1) “what is an organizational knowledge system?” (2) “how can it be made explicit?” (3) “does the representation accurately depict the organization's perspective of their unique knowledge system?” and (4) “what results from the deployment of the organizational knowledge system methodology?” The resultant answers to these research questions advanced and established the theoretical conception of an organization's knowledge system through the development of a methodology that fosters the construction and …

Process Flow Optimization Studies Through Discrete Event Simulation, Milind Chokshi

Electrical & Computer Engineering Theses & Dissertations

Computer-aided simulation has begun to emerge as a powerful tool for numerical analysis of the behavior and anticipated performance of industrial systems and their optimization. Applications include materials handling, storage and controls systems, prediction of manufacturing efficiencies, and production optimization. Simulations are used to test baseline models and subsequently analyze new production concepts, operating strategies, and planned procedures prior to costly implementation.

The study of process flows in a manufacturing environment is difficult due to its inherent stochastic nature. Breakdown of the sub-systems and failures of machines is a random process and needs to be solved based on concepts of …

Approximation Model Building For Reliability & Maintainability Characteristics Of Reusable Launch Vehicles, Resit Unal, W. Douglas Morris, Nancy H. White, Roger A. Lepsch, Richard W. Brown

Engineering Management & Systems Engineering Faculty Publications

This paper describes the development of parametric models for estimating operational reliability and maintainability characteristics for reusable launch vehicle concepts, based on vehicle size and technology support level. A reliability and maintainability analysis tool (RMAT) and response surface methods are utilized to build parametric approximation models for rapidly estimating operational reliability and maintainability characteristics such as mission completion reliability. These models that approximate RMAT, can then be utilized for fast analysis of operational requirements, for lifecycle cost estimating and for multidisciplinary design optimization.

Developing A Parametric Cost Model For Operating Costs Of Army Ground Combat Weapon Systems, James O. Winbush Jr.

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop a parametric cost model for predicting operating costs of Army ground combat weapon systems. The model is intended to be used during the first two phases of the Army's acquisition process. The research necessary to develop the model was guided by two questions: what weapon system characteristics (such as weight, horsepower, fuel consumption, primary mission, NBC protection, fire control and night fighting capability) impact directly on operating ground combat systems; and what is the form of the parametric model for operating costs for ground combat systems? The study extends the bounds of …

Exploring Participation Processes For Technology Development: Case Studies Of Biotechnology Research And Development Projects In Thailand, Omjai Yuktavetya

Engineering Management & Systems Engineering Theses & Dissertations

There is increased awareness in the organizational and management literature that participation can make contributions in technology development. One of the problems in developing biotechnology in Thailand is that only a small portion of publicly funded research and development projects directly result in commercial success. Among the reasons cited (TDRI 1992a) is a lack of collaboration between various stakeholders; therefore, an effective technology policy to support their participation is needed. This research explores current participation processes in biotechnology research and development projects in Thailand in which there were different perspectives among various stakeholders. The quantitative and qualitative methodologies developed here …

Evaluation Of Airport Operating Efficiencies Using Data Envelopment Analysis, Scott Andrew Cummings

Engineering Management & Systems Engineering Theses & Dissertations

Airport congestion represents a serious obstacle to the future growth of the air transportation industry in the United States. Future development of new airports, and expansion of existing ones is required to meet the growing demands in domestic and commercial air travel. Globalization of economies and international travel has placed additional burdens on airports nationwide. This growth is requiring airports to operate at peak efficiencies. Economic growth of surrounding industries is dependent on the airport that services that geographical region. The variations in functions that airports offer, and therefore the differences in operations, do not lend themselves to traditional efficiency …

Study Of Human Factors Variables In Battle Outcome Prediction Models, David Andrew Glovier

Engineering Management & Systems Engineering Theses & Dissertations

Over time there have been many improvements in models that are used to predict the outcome of battles. Currently there is much supposition and speculation surrounding the use of human performance related factors as additional inputs to battle simulation models to improve their accuracy. However there is no conclusive scientific evidence which shows that these factors do make a significant difference. This study investigates the use of factors that may impact on the human performance directly or indirectly in battle prediction models. These factors consist of traditional human factors and external factors that may influence the human performance. The research …