Industrial Engineering Commons^™

A Practical Guide To An Fmri Experiment, Nasser H. Kashou

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Functional Magnetic Resonance Imaging (fMRI) has been around for two decades and research in this field has been exponentially rising. Much of this research has been dominated by basic science. Recent trends have brought the clinical realm into play in which valuable contributions can still be made. Helping the clinician understand the basic concepts behind an fMRI experiment is crucial to further developing and evaluating functional paradigms and research. Critical to designing an fMRI experiment is understanding the related physics and how fine tuning scanning parameters affects the image quality, which in turn affect the findings of an fMRI study. …

Automated Localization And Segmentation Of Pelvic Floor Structures On Mri To Predict Pelvic Organ Prolapse, Sinan Onal

USF Tampa Graduate Theses and Dissertations

Pelvic organ prolapse (POP) is a major health problem that affects women. POP is a herniation of the female pelvic floor organs (bladder, uterus, small bowel, and rectum) into the vagina. This condition can cause significant problems such as urinary and fecal incontinence, bothersome vaginal bulge, incomplete bowel and bladder emptying, and pain/discomfort. POP is normally diagnosed through clinical examination since there are few associated symptoms. However, clinical examination has been found to be inadequate and in disagreement with surgical findings. This makes POP a common but poorly understood condition. Dynamic magnetic resonance imaging (MRI) of the pelvic floor has …

Monitoring Hospital Safety Climate Using Control Charts Of Non-Harm Events In Reporting Systems, Susan Robinson

All Theses

The primary aim of this thesis is to design an approach and demonstrate a methodology to supplement safety culture assessment efforts. The framework affords an enhanced understanding of hospital safety climate, specifically reporting culture, through the use of control charts to monitor non-harm patient safety events documented in reporting systems. Assessing safety culture and climate remains difficult. One of the most common methods to assess safety culture is a self-report survey administered annually. Surveys assess safety climate, because they are a snapshot of the management's and front-line staff's perceptions of safety within their settings. One component of safety culture is …

Models For Incorporating Block Scheduling In Blood Drive Staffing Problems, Yulong Su

Industrial Engineering Undergraduate Honors Theses

The purpose of this research is to develop decision support models that can be used by the American Red Cross (ARC) to schedule blood drives with improved shifts for the phlebotomists that staff them. Currently, phlebotomists work inconsistent hours and the ARC believes this is a leading cause of high turnover rates they are experiencing. For example, phlebotomists sometimes staff a blood drive until 11 PM one night and will have to work another at 8 AM the next morning. Assigning phlebotomists more consistent shifts in blocks of time will definitely improve their work schedule. Before switching to block scheduling, …

Uncertainty In Relief Supply Distribution, Christopher A. Bayles

Industrial Engineering Undergraduate Honors Theses

In the aftermath of a natural disaster the efficient planning of humanitarian relief efforts, e.g., delivering supplies to locations in need, can often mean the difference between lives being saved and lives being lost. In this paper we focus on two things: (1) appropriate objectives for routing problems in the context of delivery of relief supplies, and (2) how to handle the uncertainty associated with delivery of relief supplies after a disaster. Through applying uncertainty to parameters such as travel time between locations, we seek to examine if/how optimal routes change as a result of different objectives and the presence …

Robust System For Infection Control: An Industrial Systems Engineering Approach, Sundaravel Vinay Swarup Achudhan

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Health care delivery in the United States needs improvement. Each year about 98,000 people die as a result of medical errors and the United States is outranked by a number of developed countries in life expectancy, mortality and comorbidity. Healthcare quality is determined based on the quality of the service provided to the patient during their visit. Apart from the traditional problem solving design and development tools used to improve healthcare quality, The National Academy of Engineering and the Institute of Medicine recommend systems engineering principle and systems engineering tools to be used in health care to improve the industry. …

Detailed Inventory Record Inaccuracy Analysis, Hayrettin Kaan Okyay

Graduate Theses and Dissertations

This dissertation performs a methodical analysis to understand the behavior of inventory record inaccuracy (IRI) when it is influenced by demand, supply and lead time uncertainty in both online and offline retail environment separately. Additionally, this study identifies the susceptibility of the inventory systems towards IRI due to conventional perfect data visibility assumptions. Two different alternatives for such methods are presented and analyzed; the IRI resistance and the error control methods. The discussed methods effectively countered various aspects of IRI; the IRI resistance method performs better on stock-out and lost sales, whereas error control method keeps lower inventory. Furthermore, this …

Strategies To Improve The Efficiency Of Emergency Medical Service (Ems) Systems Under More Realistic Conditions, Kanchala Sudtachat

All Dissertations

Emergency medical service (EMS) systems provide medical care to pre-hospital patients who need rapid response and transportation. This dissertation proposes a new realistic approach for EMS systems in two major focuses: multiple unit dispatching and relocation strategies. This work makes recommendations for multiple-unit dispatch to multiple call priorities based on simulation optimization and heuristics. The objective is to maximize the expected survival rate. Simulation models are proposed to determine the optimization. A heuristic algorithm is developed for large-scale problems. Numerical results show that dispatching while considering call priorities, rather than always dispatching the closest medical units, could improve the effectiveness …

Supply Chain Flexibility In The Special Purpose Vehicle Industry., Florian J. Loderbauer 1982-

Electronic Theses and Dissertations

Supply chains of the Special Purpose Vehicle (SPV) industry are complex and with many constraints. Since the SPV industry is a special field of operation, there is no classical supply chain strategy which is appropriate. It is possible to apply concepts of industries with similar requirements but there is a high loss of time and money because these classical concepts do not fit to the SPV industry. Even strategies of the conventional automobile industry cannot be transferred. Therefore, there is the need to develop a supply chain concept for companies of the SPV industry. As a first step, basic knowledge …

A Mathematical Programming Approach For Dispatching And Relocating Ems Vehicles., Farshad Majzoubi 1983-

Electronic Theses and Dissertations

We consider the problem of dispatching and relocating EMS vehicles during a pandemic outbreak. In such a situation, the demand for EMS vehicles increases and in order to better utilize their capacity, the idea of serving more than one patient by an ambulance is introduced. Vehicles transporting high priority patients cannot serve any other patient, but those transporting low priority patients are allowed to be rerouted to serve a second patient. We have considered three separate problems in this research. In the first problem, an integrated model is developed for dispatching and relocating EMS vehicles, where dispatchers determine hospitals for …

Time-Driven Activity-Based Costing For Healthcare Provider Supply Chain Processes, Martha Isaura Gonzalez

Graduate Theses and Dissertations

In a time when healthcare costs continue to rise, nearly a third of hospital operating expenses are related to supplies, and the healthcare supply chain is complex, it is pertinent for healthcare providers to have a clear understanding of their healthcare supply chain process costs. Having a clear picture into how these costs are driven and where opportunities for cost reductions exist can support supply chain efficiencies. In this research, we develop a Time-Driven Activity-Based Costing (TDABC) supply chain cost management tool for healthcare providers. A TDABC management system can provide healthcare providers with valuable product and process supply chain …

Poisson Distributed Individuals Control Charts With Optimal Limits, Negin Enayaty Ahangar

Graduate Theses and Dissertations

The conventional method used in attribute control charts is the Shewhart three sigma limits. The implicit assumption of the Normal distribution in this approach is not appropriate for skewed distributions such as Poisson, Geometric and Negative Binomial. Normal approximations perform poorly in the tail area of the these distributions. In this research, a type of attribute control chart is introduced to monitor the processes that provide count data. The economic objective of this chart is to minimize the cost of its errors which is determined by the designer. This objective is a linear function of type I and II errors. …

After Sales Supply Chain Risk Management., Steffen Luksch

Electronic Theses and Dissertations

Lean supply chains with cost optimized production and logistics processes in the automotive industry have become a benchmark for other industries. Short delivery times, low inventories and high availability are parameters which assume a robust supply chain. In industrial practice we see, however, that in the After Sales business particularly related to the supply of automotive spare parts, that there are always unforeseen delays in delivery. In order to avoid service level losses on the focal firm level due to missing parts it is necessary to understand the risk structure on the supplier side. For this reason, a risk model …

Pavement Deterioration Modeling And Design Of A Composite Pavement Distress Index For Kentucky Interstate Highways And Parkways., Chenglong Luo

Electronic Theses and Dissertations

Pavement deterioration is one of the most important driver for prioritizing pavement management and preservation (PMP) projects. The primary goal of this thesis is to provide reasonable predictive functions from multiple linear regression (MLR) models and artificial neural networks (ANN) that can be adopted by Kentucky Transportation Cabinet (KYTC). Furthermore, we use analytic hierarchy process (AHP) to design a composite pavement distress index in order to help Kentucky Transportation Cabinet (KYTC) prioritizing PMP projects based on 11 different distress indices. Numerical results show that the MLR models provide relatively high R square values of approximately 0.8. Both MLR and ANN …

Two-Stage Network Design In Humanitarian Logistics., Seyed Soroush Moeini

Electronic Theses and Dissertations

Natural disasters such as floods and earthquakes can cause multiple deaths, injuries, and severe damage to properties. In order to minimize the impact of such disasters, emergency response plans should be developed well in advance of such events. Moreover, because different organizations such as non-governmental organizations (NGOs), governments, and militaries are involved in emergency response, the development of a coordination scheme is necessary to efficiently organize all the activities and minimize the impact of disasters. The logistics network design component of emergency management includes determining where to store emergency relief materials, the corresponding quantities and distribution to the affected areas …

A Novel Numerical Framework For Simulation Of Multiscale Spatio-Temporally Non-Linear Systems In Additive Manufacturing Processes., Nachiket Patil

Electronic Theses and Dissertations

New computationally efficient numerical techniques have been formulated for multi-scale analysis in order to bridge mesoscopic and macroscopic scales of thermal and mechanical responses of a material. These numerical techniques will reduce computational efforts required to simulate metal based Additive Manufacturing (AM) processes. Considering the availability of physics based constitutive models for response at mesoscopic scales, these techniques will help in the evaluation of the thermal response and mechanical properties during layer-by-layer processing in AM. Two classes of numerical techniques have been explored. The first class of numerical techniques has been developed for evaluating the periodic spatiotemporal thermal response involving …

Predictions Of Nox Emissions In Pulverized Coal Combustion., Niko Hachenberg 1981-

Electronic Theses and Dissertations

The purpose of this research work was to develop a transferable mathematically simple model which gives the possibility to make fast and easy predictions regarding the NOx emission behavior of a broad–spectrum of coals within a certain combustion environment. In this context, this thesis is a further step of a common ongoing investigation focused on predicting NOx emissions from self–sustaining, pulverized coal combustion in dry bottom firing systems. A comprehensive literature research focused on already published NOx prediction approaches from scientific publications based on fundamental quantitative relationships or empirical algorithms and statistical relationships was also carried out in this context. …

Early Detection And Control Of Potential Pandemics., Shengpeng Jin

Electronic Theses and Dissertations

Over the centuries, human beings have been inflicted with a variety of contagious diseases, resulting in tens of millions of respiratory illnesses and deaths worldwide. Early detection of disease spread facilitates timely responses that can greatly reduce its impact on a population. Therefore, this early information is a major public health objective and is crucial for policy makers and public health officials responsible for protecting the public from the spread of contagious diseases. Current indicators of the spread of contagious outbreaks lag behind its actual spread, leaving no time for a planned response. The studies of Christakis et al. in …

Implications Of Additive Manufacturing On Complexity Management Within Supply Chains In A Production Environment., Andre Kieviet

Electronic Theses and Dissertations

This dissertation focuses on developing a generic framework for using additive manufacturing as an appropriate production method to address the management of complexity in supply chains. While several drivers such as changing customer demand patterns and intensifying global competition increase product complexity, the available number of product variants and related processes within the supply chain itself increase costs and dilute scale effects. Several concepts and tools like mass customization, modularization, and product platforms have been developed in the past decades, but most of them focus on the product structure. Currently, there is no comprehensive tool set developed in the field …

A Heuristic Algorithm For Determining The Part Set In A Powder-Bed Additive Manufacturing Machine., Sonja Dieder

Electronic Theses and Dissertations

The goal of this research is to develop a procedure for the placement of a priority part into a planned build in a powder-bed additive manufacturing machine. Toward that goal, a heuristic procedure was developed that seeks to maximize the revenue in a scheduled build, subject to due-date constraints; i.e., all parts with the closest due date will not only be included in the build, but will be placed near the bottom of the build. Likewise, any part in the scheduled build that does not have an immediate due date is a candidate for removal in order to accommodate a …

Simulation Model For Optimization Of A Landside Harbor Logistic Chain Of Container Terminals., Klaus Striegel

Electronic Theses and Dissertations

The world wide transportation of all kind of goods with containers is a fast growing business. The challenge is to transport in the shortest time to the lowest cost. The vessels therefore become bigger and bigger. The biggest vessel with 16000 TEU is since December 2012 in service. But the next generation with 18000-22000 TEU is already being built. This raises questions in acceleration of loading and unloading process, the handling in the yards of the harbors and the transportation of the containers to Hinterland. The most common way is still to transport the container from the yard by truck, …

Investigating Present And Future Interactions Between Radio Frequency Identification, Additive Manufacturing And Supply Chain Management, Michael Nobuhiro Ochi

Master's Theses

A screening experiment was paired with research observing the past, present and futures of additive manufacturing (a.k.a. rapid prototyping, 3D printing), radio frequency identification, and supply chain management. The experiment tested different properties of objects created with a desktop fused deposition modelling printer to observe if any single factors or interactions affected the read range of embedded passive UHF RFID inlay. The combination of material and infill percentage had a statistically significant effect on read range, however the analysis is weak since the data could not justify the normality assumption of ANOVA. Furthermore, the size of the effect was small …

Compressed Air Leak Study, Colin Knue, Suresh Kumar Baskaran

Research and Creative Activities Poster Day

Today compressed air plays very important role as part of expense. A huge chunk of expenditure can be saved as such. Effort in terms of monetary and energy will be a waste if even fraction of the compressed air is lost because of leak in the system without making the best use of it. There are leak detection and repair systems that can be adapted to overcome such wastage of compressed air. In this project, a procedure using ultrasonic leak detector to identify, locate and repair leaks is adapted. The summary of controlling already existing leaks and preventing more new …

Systems Simulation Analysis Of A Hospital Rapid Response System, Shoruk Mansour

Research and Creative Activities Poster Day

The poster presents a systems simulation analysis of a hospital rapid response system. Analysis of interventions and future work related to the project are included.

Ergonomics Study Led Lighting Assembly, Marylin Glass-Angeles, Nathan Christensen, Josef Imesh, Lorena Peña, Natalia Matos

Research and Creative Activities Poster Day

The current assembly process of the LED Lighting product line at Landscape Forms (LF) combines high force exertion, motion repetition and an uncomfortable posture. Therefore, Industrial Engineers overseeing the manufacturing of these products raised a concern for their workers health and were interested in identifying injury risks related to the current methodology as well as opportunities for the reduction of such risks.

The Green Manufacturing Industrial Consortium’S (Gmic) Approach To Zero-Waste-To-Landfill (Zwtl), Nathan J. Christensen, Marylin Glass-Angeles

Research and Creative Activities Poster Day

Introduction: As organizations continually seek to reduce various forms of waste, some may seek to reduce their landfill impact and improve recycling and material disposal practices. Many organizations interested in reducing their landfill waste have embarked on a zero-waste-to-landfill (ZWTL) journey. This journey involves thoroughly exploring the landfill waste of an organization, reverse tracking the waste to its source, and establishing new practices and procedures for eliminating the source of waste from the landfill stream. The purpose of this poster is to describe the methodology used by the Green Manufacturing Initiative to assist companies on their ZWTL journey.

Veneer Defect Data Collection & Analysis, Marylin Glass-Angeles, Josef Imesh, Nathan Christensen, Nathan Bowen, Zachary Miller

Research and Creative Activities Poster Day

Objectives: This project is Phase I of a two part study with the purpose of aiding Steelcase in reducing defects occurring in the sanding step of the wood manufacturing process. During Phase I, the team collected data and used the results to identify the greatest material and profit losses. The continuing goal of the study will be to address these issues to the greatest extent possible.

Modeling And Analysis Of Patient Care Assistants’ Workflow, Ewing Tiong

Research and Creative Activities Poster Day

Background

While there is a considerable amount of research on medium-to-long decision support models for healthcare systems, little emphasis is placed on research that focuses on short-term operational decisions made by healthcare providers. Patient care assistants (PCAs) provide both indirect and direct patient care under the supervision of a registered nurse (RN). Main responsibilities include:

• Gathering patient data
• Assisting patients with activities of daily living (ADLs)

Position/Speed Sensorless Control For Permanent-Magnet Synchronous Machines, Yue Zhao

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Permanent-magnet synchronous machines (PMSMs) are widely used in industrial applications owing to their distinctive advantages, such as high efficiency, high power density, and wide constant power region. To achieve high-performance field oriented control, accurate rotor position information, which is usually measured by rotary encoders or resolvers, is indispensable. However, the use of these sensors increases the cost, size, weight, and wiring complexity and reduces the mechanical robustness and the reliability of the overall PMSM drive systems. The goal of the research for this dissertation was to develop a rotor position/speed sensorless control system with performance comparable to the sensor-based control …

Systems Theory Based Framework For Competency Models, Joseph M. Bradley

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems theoretic framework for design, analysis and transformation of competency models using an inductive research design. This research examines the origins and development of competency models from a systems theoretic perspective. Competency models have been largely developed by a comparative method first proposed by McClelland, or the use of Delphi method survey techniques. The assumption that a population containing an exemplar and fully successful members would enable population of a holistic competency model has reported numerous failures. Similarly, reporting on the use of Delphi methods has focused on attempting …