Industrial Engineering Commons^™

A Control-Chart Based Method For Solder Joint Crack Detection, Jianbiao Pan

Industrial and Manufacturing Engineering

Many researchers have used different failure criteria in published solder joint reliability studies. Since the reported timeto-failure would be different if different failure criteria were used, it would be difficult to compare the reported reliability life of solder joints from one study to another. The purpose of this study is to evaluate the effect of failure criteria on the reported thermal fatigue life and determine which failure criterion could detect failure sooner. First, the application of the control-chart-based method in a thermal cycling reliability study is described. The reported time-to-failure data were then compared based on four different failure criteria: …

Dynamic Surgical Tool Tracking And Delivery System Using Baxter Robot, Sthitapragyan Parida, Juan Pablo Wachs, Maria Eugenia Cabrera

The Summer Undergraduate Research Fellowship (SURF) Symposium

Several hospitals face nurse staffing shortages for surgeries. This research focuses on building a system with Baxter robot capable of identifying surgical tools using computer vision and delivering them to the surgeon on demand. This would deal with the issue of nurse unavailability during simple surgical procedures. The key aspects of the project were: testing the accuracies of various Artificial Neural Networks (ANNs) in classifying surgical instruments, and programming Baxter to implement a surgical tool delivery system using magnets at the tip of its 7-DOF robotic arms. The methodology consisted of, first, implementing algorithms to enable Baxter to do pick …

Local Buckling Behavior Of Round Steel Tubes Subjected To Compressive Loads, Joseph Moore, Ben Fell

STAR Program Research Presentations

This project will investigate the local buckling induced fracture behavior of round steel tubes subjected to axial compressive loads, representative of observed failures in buried pipelines during seismic events. Nine initial tests will be conducted across three lengths of round steel tube: 8”, 12”, and 20”. Another twelve tests will be conducted on the lengths of 12” and 20” to test varying initial compressive force upon the round steel tubes. Three D/t ratios will be considered for each length of round steel tube: 52.6, 78.9, and 121.2. To verify the material properties of the test specimens an ancillary tensile coupon …

Design Of A Sign-Out Process To Improve Surgical Safety, Sumonthip Chompoodang Gmitro

All Theses

According to the World Health Organization (WHO), the surgical safety checklist consists of three parts; sign-in, time-out and sign-out. It has been observed that the sign-out process is the least frequently completed. In this study, because of a concern for the risk of adverse events occurring in the OR, the sign-out process used in a local hospital was redesigned as a web-based application embedded on a desktop computer and on a mobile device. Both web-based platforms were tested along with the current sign-out process on a computer. Eighteen circulating nurses in the operating rooms of Greenville Memorial Hospital used each …

Evaluating The Effectiveness Of The Global Nuclear Detection Architecture Using Multiple-Objective Decision Analysis, Holly Hilliard

Industrial Engineering Undergraduate Honors Theses

The National Academy of Sciences has recently completed a study of the Global Nuclear Detection Architecture (GNDA) Metrics for the Department of Homeland Security's Domestic Nuclear Detection Office. This research uses the reports strategic framework and notional metrics (and additional information) to develop one overall measure of GNDA effectiveness. The potential benefit of one effectiveness measure would be ability to assess and communicate progress over time to the diverse group of national and international stakeholders and decision makers. This thesis uses the mathematics of multiple objective decision analysis to develop the effectiveness measure. A notional model was developed and it …

Pharmacists' And Patients' Perceptions Of Role Of Pharmacist In Discharge Process, Ravi Teja Vempati

All Theses

The objective of this study was to identify the perceptions of both patients and pharmacists about the pharmacist's role in the hospital discharge process. In order to do this, observations were conducted with the patients and interviews were conducted with both patients and pharmacists. During the interviews, both the patients and pharmacists were asked about the pharmacist's role in the hospital discharge process. The interviews were qualitatively analyzed using the in vivo technique. Four high-level themes emerged from this study: Current role of a pharmacist in the hospital, Ideal role of a pharmacist in the discharge process, Pharmacists' perceptions of …

Multistage Accelerated Reliability Growth Testing Model And Data Analysis, Leiying Jiang

Graduate Theses and Dissertations

Accelerated reliability growth testing has recently received a renewed interest in reliability engineering. The concepts of accelerated testing and reliability growth individually have been used in a variety of applications, either for hardware systems or software systems. The advantage of using a combined strategy is that it could shorten the testing time while maximizing the reliability. In the literature, there are many references related to optimal test design for reliability from either a component level or a system level. In this research, we suggest an approach which conducts accelerated testing at the component level while supporting estimates of reliability at …

Disruption Response Support For Inland Waterway Transportation, Jingjing Tong

Graduate Theses and Dissertations

Motivated by the critical role of the inland waterways in the United States' transportation system, this dissertation research focuses on pre- and post- disruption response support when the inland waterway navigation system is disrupted by a natural or manmade event. Following a comprehensive literature review, four research contributions are achieved. The first research contribution formulates and solves a cargo prioritization and terminal allocation problem (CPTAP) that minimizes total value loss of the disrupted barge cargoes on the inland waterway transportation system. It is tailored for maritime transportation stakeholders whose disaster response plans seek to mitigate negative economic and societal impacts. …

Large-Scale Solution Approaches For Healthcare And Supply Chain Scheduling, Ridvan Gedik

Graduate Theses and Dissertations

This research proposes novel solution techniques for two real world problems. We first consider a patient scheduling problem in a proton therapy facility with deterministic patient arrivals. In order to assess the impacts of several operational constraints, we propose single and multi-criteria linear programming models. In addition, we ensure that the strategic patient mix restrictions predetermined by the decision makers are also enforced within the planning horizon. We study the mathematical structures of the single criteria model with strict patient mix restrictions and derive analytical equations for the optimal solutions under several operational restrictions. These efforts lead to a set …

The Impact Of Block Scheduling And Release Time On Operating Room Efficiency, Rebecca Weiss

All Theses

Planning for sufficient surgical capacity at a hospital requires that many tactical and operational decisions be made before the day of surgery. Typically, blocks of time in operating rooms (ORs) are assigned and specific surgical cases are placed in rooms. The hospital monitors utilization to determine the schedule's effectiveness in balancing the risk of overtime with idle time. In this thesis, we will examine how adjusting schedule risk ratios and penalty values, and providing shared, open posting time affected the hospital's ability to identify an efficient but high quality and low cost block schedule. The proposed schedules were tested by …

Investigating The Non-Adoption Of Electronic Health Records In Primary Care, Saravanan Ramdoss

All Theses

The objective of this study was to investigate the underlying reasons behind primary care centers in the United States not implementing an Electronic Health Record system in spite of looming penalties under the Health Information Technology for Economic and Clinical Health (HITECH) Act. In order to do this, survey was developed and distributed among healthcare providers who have not yet implemented an EHR system at their practice. The questions for the survey were developed after conducting a literature review of the barriers to EHR implementation. In this review, six themes emerged: technical, cost, productivity, change process, privacy and time. These …

Integrating Visual Mnemonics And Input Feedback With Passphrases To Improve The Usability And Security Of Digital Authentication, Kevin Juang

All Dissertations

The need for both usable and secure authentication is more pronounced than ever before. Security researchers and professionals will need to have a deep understanding of human factors to address these issues. Due to their ubiquity, recoverability, and low barrier of entry, passwords remain the most common means of digital authentication. However, fundamental human nature dictates that it is exceedingly difficult for people to generate secure passwords on their own. System-generated random passwords can be secure but are often unusable, which is why most passwords are still created by humans. We developed a simple system for automatically generating mnemonic phrases …

Two-Stage Methodology For Managing And Controlling Material Flow Between Multiple Construction Projects, Fatmah Almazkoor

All Dissertations

There is a strong connection between managing and controlling material flow in a supply chain and its performance. While this is true in all supply chains, it is particularly true in the construction supply chain (CSC) where the total demand for parts is finite, the storage space available can be small, and the variability in consumption is high. On the other hand, effectively controlling the CSC can have a significant impact on controlling risk and buffering their impact so that projects stay on schedule and within budget. Currently, a common control of the CSC is with a push-based material ordering …

Graphical Display Of The Effect Of Three Cash Flow Elements For Sensitivity Analysis, Kawintorn Pothanun

Engineering Management & Systems Engineering Theses & Dissertations

Sensitivity analysis is one of the most important analysis techniques in a decision making process. The analytic intent behind sensitivity analysis is the variation of parameters in data models, and the examination of the effect of these variations on the outcome of the models. There are four primary benefits from conducting a sensitivity analysis: (a) sensitivity analysis facilitates the decision makers' development of recommendations, (b) sensitivity analysis serves as a tool for communication among stakeholders or decision makers in a project or an organization, (c) sensitivity analysis increases overall understanding of the decision models, and (d) sensitivity analysis serves as …

Time-Based Collision Risk Modeling For Air Traffic Management, Alan E. Bell

Engineering Management & Systems Engineering Theses & Dissertations

Since the emergence of commercial aviation in the early part of last century, economic forces have driven a steadily increasing demand for air transportation. Increasing density of aircraft operating in a finite volume of airspace is accompanied by a corresponding increase in the risk of collision, and in response to a growing number of incidents and accidents involving collisions between aircraft, governments worldwide have developed air traffic control systems and procedures to mitigate this risk. The objective of any collision risk management system is to project conflicts and provide operators with sufficient opportunity to recognize potential collisions and take necessary …

A New Integrated Design Framework For The Facility Layout Problem, Kyle F. Thomas

Open Access Theses

This thesis proposes a new integrated design framework for solving facility layout problems (FLP). The most popular existing framework, Muther's Systematic Layout Planning (SLP) does not address the variety of design goals associated with facility layout problems and is highly manual and so time consuming to perform. Furthermore, the SLP framework does not help the designer select a modeling tool to use in developing design alternatives, either by defining what a requisite model would include, or explicitly suggesting ones from literature. With the advancements made in academic research and computational capabilities since the development of the SLP framework, a new …

Influence Of Referential Coding In A Choice Task Performed In A Simulated Driving Cockpit, Aiping Xiong

Open Access Theses

Driving and other tasks performed by the driver of a vehicle are spatial. Thus, it is important to understand how the driver represents the spatial environment. In laboratory studies, the Simon task is used to study spatial coding. Participants are to make a left or right response to a nonspatial stimulus feature, but the stimulus can occur in a left or right position. The Simon effect is that responses are faster when the stimulus location corresponds with the response location. That effect is not usually found for a go/no-go task in which only one response is made to one of …

Solvent System Selection For Xylooligosaccharides Separation By Centrifugal Partition Chromatography Using Conductor-Like Screening Model For Real Solvents, He Zhang

Open Access Theses

The production of value-added, bio-based industrial commodity chemicals is an important area in science right now and this study provides an initial step in the recovery of bio-based chemicals from hemicellulose. Hemicellulose is a long chain polymer mostly consisting of xylose, which is a five-carbon sugar, and a variety of other compounds that are ubiquitous in plant life. The hemicellulose polymer chain can be depolymerized into smaller components, called xylooligosaccharides (XOS) with different chain lengths of xylose linked by beta-1-4 glycosidic bonds, using either hot water, or dilute sulfuric acid. The xylooligosaccharides can then be purified from one another from …

Multimodal Perception Of Histological Images For Persons Blind Or Visually Impaired, Ting Zhang

Open Access Theses

Currently there is no suitable substitute technology to enable blind or visually impaired (BVI) people to interpret visual scientific data commonly generated during lab experimentation in real time, such as performing light microscopy, spectrometry, and observing chemical reactions. This reliance upon visual interpretation of scientific data certainly impedes students and scientists that are BVI from advancing in careers in medicine, biology, chemistry, and other scientific fields. To address this challenge, a real-time multimodal image perception system is developed to transform standard laboratory blood smear images for persons with BVI to perceive, employing a combination of auditory, haptic, and vibrotactile feedbacks. …

Optical Direct-Write Nanolithography Based On Self-Assembled Resist, Meghana Akella

Open Access Theses

Holographic display is being developed for next generation mobile phones. However, manufacturing of miniature gratings for the holographic projectors cost a few thousand dollars today, not making the concept practical for commercial purposes. In this thesis, we discuss the feasibility of self-assembled nanoparticles to manufacture holographic gratings cost-effectively and at the nanoscale. Using our approach, the gratings can be manufactured at the scale of 20nm and the cost per chip is expected to cost a few dollars.^ In this thesis, a hydrophobic SAM was used to modify the surface of silicon. Direct-write UV laser lithography was used for photothermal patterning …

The Multi-Depot Minimum Latency Problem With Inter-Depot Routes, Timothy W. Duket

Open Access Theses

The Minimum Latency Problem (MLP) is a class of routing problems that seeks to minimize the wait times (latencies) of a set of customers in a system. Similar to its counterparts in the Traveling Salesman Problem (TSP) and Vehicle Routing Problem (VRP), the MLP is NP-hard. Unlike these other problem classes, however, the MLP is customer-oriented and thus has impactful potential for better serving customers in settings where they are the highest priority. While the VRP is very widely researched and applied to many industry settings to reduce travel times and costs for service-providers, the MLP is a more recent …

Novel Models And Efficient Algorithms For Network-Based Optimization In Biomedical Applications, Seyed Javad Sajjadi

USF Tampa Graduate Theses and Dissertations

We introduce and study a novel graph optimization problem to search for multiple cliques with the maximum overall weight, to which we denote as the Maximum Weighted Multiple Clique Problem (MWMCP). This problem arises in research involving network-based data mining, specifically, in bioinformatics where complex diseases, such as various types of cancer and diabetes, are conjectured to be triggered and influenced by a combination of genetic and environmental factors. To integrate potential effects from interplays among underlying candidate factors, we propose a new network-based framework to identify effective biomarkers by searching for "groups" of synergistic risk factors with high predictive …

Lemongrass And Cinnamon Essential Oils As Vitamin C Preservatives And Flavour Enhancers In Jam, Denice Byarushengo

Tanzania Journal of Engineering and Technology (TJET)

Lemongrass and cinnamon essential oils (LEO and CEO) are natural oils with high anti oxidation capacity, pleasant flavour, and various health benefits. Their ability to preserve vitamin C and flavour in jam have not been tested. In this study the performance of two essential oils (EOs) in preserving vitamin C and improving jam flavour were investigated. The EOs were produced by hydro-steam distillation of fresh lemongrasses and cinnamon leaves using a Clevenger apparatus. Jam samples were dosed with various concentrations of either single or mixed EOs and then stored at either room or refrigeration temperature. Samples were analysed for changes …

Noise Pollution In Maize Milling Smes, Erasto Elias

Tanzania Journal of Engineering and Technology (TJET)

Maize milling SMEs emit high levels of noise which can have adverse effects on human beings and therefore require controlling. This paper reports on a study that involved assessment and measurement of noise level in maize milling SMEs in DSM and Morogoro urban, gathering opinions of workers and the neighbouring population on noise problems, and suggesting solutions for noise control. Noise measurements in 41 SMEs were recorded from 89-103 dBA in DSM and 92-103 dBA in Morogoro near the milling machines. These values were higher than the safe level of 85 dBA for 8 hours working shift. Measurement also indicated …

Analysis Of Different Techniques For Improving Performance Of Flat Plate Solar Collectors For Fruits Drying, Godfrey Mbabaye

Tanzania Journal of Engineering and Technology (TJET)

Fruits drying had become a broader technology in fruits and vegetables value addition. The technology is reported to be a promising way of drying without incurring higher cost but its adaptation has not been feasible in rural areas. Solar dryers have been developed but its poor performance limits its applicability. In this study, several techniques for modifications of traditional solar collector were addressed. It was observed that, varying collector designs in different techniques, a range of collector performances can be archived. The research shows that, collector efficiency can be improved by 9.6% when employing double duct counter flow compared to …

Social Network Analysis Of Researchers' Communication And Collaborative Networks Using Self-Reported Data, Oguz Cimenler

USF Tampa Graduate Theses and Dissertations

This research seeks an answer to the following question: what is the relationship between the structure of researchers' communication network and the structure of their collaborative output networks (e.g. co-authored publications, joint grant proposals, and joint patent applications), and the impact of these structures on their citation performance and the volume of collaborative research outputs? Three complementary studies are performed to answer this main question as discussed below.

1. Study I: A frequently used output to measure scientific (or research) collaboration is co-authorship in scholarly publications. Less frequently used are joint grant proposals and patents. Many scholars believe that co-authorship …

Creating A Seamless Pipeline Into Undergraduate Programs In Stem Fields Through Region-Wide Articulation Agreements, Immanuel Edinbarough, Mikhail M. Bouniaev, Bill W. Elliott

Manufacturing & Industrial Engineering Faculty Publications

Underrepresented minority students pursue science, technology, engineering, and mathematics (STEM) related degrees at much lower rates compared to other segments of the population. To attract minority students, schools with STEM programs have resorted to myriad strategies such as cohorts, scholarships, mentoring, summer bridges, etc. Some schools have also sought innovative ways to develop a pipeline for graduates of two-year technical degree programs to matriculate into their four-year STEM programs and complete the remaining coursework leading to a BAT or BS degree. The University of Texas at Brownsville (UTB) has adopted this latter innovative approach to increasing student enrollment in STEM …

2d Wireform Process Improvement, Katy Conlin, Carlo Ebora, Jordan Gamble

Mechanical Engineering

The body of this work has been created for Edwards Lifesciences in conjunction with senior project requirements. As such, the information produced and contained within is under a non‐disclosure agreement. As per request by sponsor, the body of the work will not be submitted to any outside parties, and the title page will serve as proof of completion.

A Set Union Based Formulation For Course Scheduling And Timetabling, Jesse Paul Bukenberger

Master's Theses

The Course Timetabling Problem is a widely studied optimization problem where a number of sections are scheduled in concert with the assignment of students to sections in order to maximize the desirability of the resulting schedule for all stakeholders. This problem is commonly solved as a linear program with variables for each student or group of students with identical schedules. In this paper we explore an alternative formulation that aggregates binary student variables into integer variables denoting the number of students enrolled in a course. Our solution method assumes decomposition of the general schedule into time blocks, and applies a …

Analysis Of Environmentally Friendly Marking Ink For Military Equipment And Electronics, Liang Li

Master's Theses

Recent advancements in corrosion-resistance coating technology has reduce the use of environmentally harmful compounds such as Hexavalent Chromium by replacing Hexavalent Chromium in primers and topcoat. However, marking inks were neglected in the process. Products such as Enthone 50 series are still widely used, which contain compounds such as lead, hexavalent chromium, bisphenol A (BPA), Cadmium Sulfide, and more. Excluding catalyst compositions in Enthone, the chemicals in the ink alone contained three reproductive toxicant and numerous carcinogens. Therefore, it was essential to search and validate the performance of potential marking ink that would meet the standards in military applications.

Eleven …