Industrial Engineering Commons^™

Visual Representations Of Queried Database Results Using Google's Mapping Technologies, Steven Michael Kilbert

Industrial and Manufacturing Engineering

Database queries have been used in business applications throughout the world to filter out specific information which is often used as a basis for making a decision. Despite the broad use of queries, there are only a limited number of ways to represent results, the most common being a dynaset, or results table. This paper describes the investigation of methods to create more visual representations of results using maps to show queried geospatial data. From these methods, applications were successfully developed to create customized maps in Google Earth and Google Maps based on queried geographical data from Microsoft Access databases. …

Implementing Rfid To Improve Animal Shelter Inventory And Allocation, Adam Mach

Industrial and Manufacturing Engineering

The purpose of this project is to observe the best way to incorporate Radio Frequency Identification (RFID) technology into the animal inventory system present in animal shelters, while also observing the benefits of implementing this system. The Woods Humane Society was used in this project as a sample animal care facility that could benefit from this application.

Many RFID systems can be observed in other industries, but very few examples this technology exist in animal shelters or smaller animal care facilities. Part of the reason for that is because funds are scarce at most animal care facilities, like the Woods …

Simpler Packaging, Tomiko Oden

Graphic Communication

This project explains how product packaging is become more "green", and thus more simple. Packaging needs to go beyond just simplifying materials and graphics - it needs to create a simpler process in order to reduce wasted time, energy, and resources.

A Study Of Decision Analysis Methods In Aerospace Technology Assessments, Sharon Monica Jones

Engineering Management & Systems Engineering Theses & Dissertations

Managers of aerospace technology programs and projects are faced with the challenge of making technology portfolio decisions under conditions of limited data, rapidly changing macro level factors and organizational uncertainties. To help make these technology investment decisions, some aerospace managers and analysts have used techniques from the field of decision analysis. In addition, there have been a limited number of research studies of real decision problems.

This dissertation presents the results of a non-experimental examination of the use of decision analysis methods for the assessment of aerospace technology portfolios. A web-based survey instrument was developed based on the results of …

An Analytical Framework And Model Formulation For Measuring Risk In Engineering Enterprise Systems: A Capability Portfolio Perspective, Paul Raphael Garvey

Engineering Management & Systems Engineering Theses & Dissertations

This work formulates an analytical framework and computational model for assessing risk in engineering enterprise systems. It addresses the engineering management problem of how to represent, model, and measure risk in large-scale, complex systems engineered to function in enterprise-wide environments.

The research in this dissertation extends current practice in the management of risk for traditional systems and creates new constructs and protocols for the management of risk in engineering large-scale, complex, and highly networked enterprise systems. This work advances engineering management theory and analytic practice as applied to the measurement and management of risk for enterprise systems engineered within capability …

Reconciling Discontinuities And Disruptions: The Construction Of An Integrated Typology, David Jeffery Kern

Engineering Management & Systems Engineering Theses & Dissertations

Radical innovations are often characterized by a rapid shift from one dominant design to another. The theories of discontinuous and disruptive innovation present two important and independent explanations for why these shifts occur. This research tests the usefulness of combining these two theories into a single integrated typology. First, a typology is constructed that classifies shifts in dominant designs according to the theories of discontinuous and disruptive innovation. Next, the usefulness of this typology is tested with a taxonomy derived from 100 randomly selected shifts in dominant designs from across a broad range of industries. This research reconciles the theories …

Investigating The Relationship Between An It Project Manager's Emotional Intelligence And The Customer's Perception Of Success, William Jacob Lamarsh Ii

Engineering Management & Systems Engineering Theses & Dissertations

This research focuses on the intersections of Project Management, Information Technology (IT), and Emotional Intelligence. The Project Management Institute (PMI) created the Project Management Professional (PMP) certification, which is one of the most highly regarded and sought after professional certifications (Project Management Institute 2005, p. 15-18). This certification acknowledges the holder as a knowledgeable practitioner in Project Management. The purpose behind Project Management is to obtain requirements, sometimes fluid at best, and develop solutions that are traceable by schedule and cost controls. This approach allows a Project Manager to monitor and control the project through successful completion. However, the PMI …

Design Of An 8-Channel Data Acquisition System For Measuring Diode Junction Temperature, Jason Maynard

Industrial and Manufacturing Engineering

The solid state lighting industry is striving to expand the use of light emitting diodes (LEDs) in more applications, particularly in high brightness applications. As the power of LEDs increase, heat removal becomes a critical issue. To improve device lifetime, quantum efficiency, and LED colour, the diode p-n junction temperature (Tj) must be kept to a minimum. Measuring this key parameter is difficult or impossible with direct methods, such as thermocouples and infrared cameras, due to the small size of LEDs. Fortunately, junction temperature can be measured indirectly by using a relationship between the diode forward voltage (Vf) and junction …

Optimization Of Lifeguard Towers, Equipment, And Sign Placement With Human Factors Considerations For The Cal Poly Recreation Center Expansion, Brian J. Henrikson

Industrial and Manufacturing Engineering

Cal Poly’s Recreation Center serves many faculty, students and alumni by providing them with a safe and fun environment to work out and swim. An overwhelming majority of students voted for a Recreation Center expansion to handle the increased usage of the Center over the past few years. The focus of this report is the safe and effective operations of the pool deck and the lifeguard staff. Three surveys were created to see what the lifeguard staff, as well as pool users, thought about the current pool deck and what they would like to see in the new pool deck …

Leanness And Agility In Job Shops: A Framework For A Survey Instrument Developed Using The Delphi Method, Zaki Kuruppalil

All-Inclusive List of Electronic Theses and Dissertations

Manufacturers are facing new challenges as competition has become global. Manufacturing companies arc looking for strategies which would help them gain an edge over their competitors. In the United States, lean manufacturing and agile manufacturing have been gaining importance among industries. Agile manufacturing was developed when the United States Department of Defense (DOD) requested Iacocca Institute at Lehigh University to develop a manufacturing framework that could give US companies an edge over their worldwide competitors whereas lean manufacturing has its roots tied to the Toyota Production System (TPS). This raises the questions: what is the clear difference between the two …

Case Studies On Usage Of Axiomatic Design Methodology In The U.S. Industries, Alireza Alavizadeh

All-Inclusive List of Electronic Theses and Dissertations

Axiomatic Design, originally developed by Nam Suh, is a design methodology that attempts to systematize the design practices and to provide a basis on which design can be carried out and optimized according to two main axioms, namely, Independence and Information axioms. Although various scholars in both academia and industry have studied the applicability and effectiveness of this methodology, the extent to which Axiomatic Design has been implemented in industry, particularly in the U.S., is unknown. l1l This study was conducted to identify the extent to which Axiomatic Design is known to the U.S. industries. Other purposes of this study …

Process Modelling Support For The Conceptual Modelling Phase Of A Simulation Project, Cathal Heavey, John Ryan

Conference papers

While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the conceptual modelling phase. Several authors have reported the advantages of using process modelling tools in the early phases of a simulation project.

This paper provides an overview of process modelling tools in relation to their support for simulation, categorizing the tools into formal method and descriptive methods. A conclusion from this review is that none of the tools available adequately support the requirements gathering phase of simulation. This is not surprising as none of the process modelling …

Efficacy Of Virtual Models In A Production Systems Course, Lawrence Whitman, Barbara Chaparro

Publications

Wichita State University has developed an integrated set of virtual reality models of an aircraft assembly line. These models are intended to provide students an ‘artifact’ of industrial and manufacturing engineering by providing a realistic environment for initial learning and application. By utilizing a virtual model of the line, students are able to view the process and interrogate the process details, make changes and observe the effects, and gain a better understanding of the concepts and their interrelationships. This paper presents the method used to assess if virtual models (computer models of a real factory) lead to: improved perception of …

A Dynamic Heuristic For The Stochastic Unrelated Parallel Machine Scheduling Problem, Jean-Paul Arnaout, Ghaith Rabadi, Ji Hyon Mun

Engineering Management & Systems Engineering Faculty Publications

This paper addresses the problem of batch scheduling in an unrelated parallel machine environment with sequence dependent setup times and an objective of minimizing the total weighted mean completion time. The jobs' processing times and setup times are stochastic for better depiction of the real world. This is a NP-hard problem and in this paper, new heuristics are developed and compared to existing ones using simulation. The results and analysis obtained from the computational experiments proved the superiority of the proposed algorithm PMWP over the other algorithms presented.

Requirements Gathering For Simulation, John Ryan, Cathal Heavey

Conference papers

This paper discusses the current shortfalls in support for the pre-coding phases of a discrete event simulation project. The paper then presents a process modelling technique, Simulation Activity Diagrams (SADs), developed to specifically support the initial requirements gathering phases of a simulation project. The paper concludes with an outline of proposed future developments to the modelling technique.

Conceptual Simulation Modeling For Regional Distribution Center Systems, Kitti Setavoraphan

All-Inclusive List of Electronic Theses and Dissertations

This study focuses on the simulation modeling of warehousing operations commonly seen at general merchandize distribution centers. The key operational processes and modeling requirements related were identified and analyzed through a pattern and knowledge-based approach to capture the structural and behavioral characteristics of general distribution centers to support simulation study for performance evaluation and process improvement. Robust representations and patterns were developed to represent the elements and logic of the simulation models for these processes to facilitate efficient and effective construction of models. The issues of conceptual modeling such as synthesis, abstraction, decomposition, and specialization were addressed.

A Systems Methodology For Measuring Operational Organization Effectiveness: A Study Of The Original Equipment Computer Manufacturing Industry, 1948 To 2001, Teddy Steven Cotter

Engineering Management & Systems Engineering Theses & Dissertations

Optimizing operational organizational effectiveness is the central, although often unstated, goal of engineering management and systems engineering research and applications. Two fundamental problems remain to be addressed in pursuit of this goal. First, despite over fifty years of research in various disciplines, there is still no universally accepted definition of organizational effectiveness. Second, no methodology exists to identify the domains, dimensions, and determinants of operational organizational effectiveness and dynamically model operational organizational effectiveness within a given population.

This research synthesizes a systems engineering methodology for identifying the domains, dimensions, and determinants of and dynamically modeling operational organizational effectiveness for an …

Evaluation Of Bus And Truck Automation Operations Concepts, H.-S. Jacob Tsao, Lan Zhang, Lin Lin, Deepa Batni

Faculty Publications

Traffic congestion will continue to worsen and likely worsen at a faster rate than ever. People throughput and freight throughput have become critical issues for California and the rest of the nation. PATH has funded with approximately $125K a research project entitled “Evaluation of Bus and Truck Automation Scenarios” jointly proposed by Jan Botha (Principal Investigator) of Department of Civil and Environmental Engineering and Jacob Tsao (Co-PI) of Department of Industrial and Systems Engineering at San Jose State University. This report summarizes the major findings of the research conducted by Professor Tsao and his assistants with approximately $44K out of …

Combining Systematic Layout Planning And Computer Simulation In The Design Of Manufacturing Facilities, Akintoye M. Akinyoade

All-Inclusive List of Electronic Theses and Dissertations

In this study, the systematic layout planning (SLP) and computer simulation were combined to improve the layout design of a manufacturing facility using a case study.

Investigation Of Nascar Restrictor Plate Manifold Insert Using Wave Engine Simulation And Response Surface Methodology, John Mason Gross Iii

Electronic Theses and Dissertations

With the increasing growth in computer processing power, computer based computational fluid dynamics simulations are finding increasing acceptance and use in the field of internal combustion engine development. Once fully developed, such simulations provide detailed and expedient tools for testing existing theories, as well as new ideas. While numerous studies on wave propagation and fluid flow in intakes manifolds exist, most restrict the analysis to a single intake runner and port, examining only the dynamics from the runner-to-plenum junction downstream to the valve. While such analyses provide comprehensive models for wave propagation dynamics in the runner, little is published on …

Value Stream Improvements Using Kanban For The X-Workcell, Jason Noble

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Jason Noble on August 26, 2003.

A Statistical Evaluation Of Risk Priority Numbers In Failure Modes And Effects Analysis Applied To The Prediction Of Complex Systems, Anthony W. Dean

Engineering Management & Systems Engineering Theses & Dissertations

Complex systems such as military aircraft and naval ships are difficult to cost effectively maintain. Frequently, large-scale maintenance of complex systems (i.e., a naval vessel) is based on the reduction of the system to its base subcomponents and the use of manufacturer-suggested, time-directed, preventative maintenance, which is augmented during the systems lifecycle with predictive maintenance which assesses the system's ability to perform its mission objectives. While preventative maintenance under certain conditions can increase reliability, preventative maintenance systems are often costly, increase down time, and allow for maintenance-induced failures, which may decrease the reliability of the system (Ebeling, 1997). This maintenance …

Development Of A Multicriteria Spatial Decision Support System With Application To The Economic Optimization Of Aircraft Based Weather Data Collection, Ganzague Erol Osman Ozan

Engineering Management & Systems Engineering Theses & Dissertations

This research is motivated by the economic optimization of the Troposherical Airborne Meteorological Data Reporting (TAMDAR), an aircraft-based meteorological data collection system. In the envisioned TAMDAR system, meteorological data collected by the onboard sensors of selected aircraft are transmitted to the ground as aircraft fly their missions. The data is processed by a national center, which disseminates the data to diverse users such as weather forecasters and aviation control centers. Substantial government funding is required for the implementation and operation of this new data acquisition system and data transmission expenditures constitute the largest portion of the costs. To achieve economic …

Information System Product Development By Integration Of Kano's Customer Satisfaction Model With Quality Function Deployment, Afife Yesim Sireli

Engineering Management & Systems Engineering Theses & Dissertations

Product development of complex, innovative information technology related systems presents difficult challenges for technology managers, and new product failures are a significant problem. The main reason for this is insufficient decision-making due to the lack of a customer-oriented product development process in the information system (IS) companies, which is often related to deficiencies in cooperation between R&D and marketing departments. Integrating consumer requirements into the product design phase is an important factor for improving market success. Therefore, a product development decision model is needed for the managers of information system companies to make more accurate decisions about the characteristics of …

Definition And Evaluation Of Bus And Truck Automation Operations Concepts, H.-S. Jacob Tsao, Jan Botha

Faculty Publications

Traffic congestion will continue to worsen and likely worsen at a faster rate than ever. People throughput and freight throughput have become critical issues for California and the rest of the nation. PATH has been funding a one-year research project entitled “Definition And Evaluation of Bus And Truck Automation Operations Concepts,” proposed by the authors. This report summarizes the results of the research project achieved during the first six months. During those six months, we reviewed literature and developed operating concepts for both urban bus automation and inter-city truck automation. We also selected a small number of most promising operating …

The Quality Problem Solving Method And Its Effectiveness At Nortech Inc., Jeffrey Henderson

Honors Capstones

Capstone submitted as a graduation requirement for the BSU Honors Program.

A Comparative Study On Projected And Actual Manufacturing Times To Identify The Source Of Customer Delinquency, Zaki Kuruppalil

All-Inclusive List of Electronic Theses and Dissertations

This study was an investigation of the projected lead time and the actual lead time for a part manufactured at Tri-Industries Inc., Terre Haute, Indiana. The research was focused on a single part produced in Tri-Industries. The problem was that there is a difference in the projected lead time and the actual lead time of the part under investigation. The actual lead time was longer than projected lead time, which resulted in the company being delinquent in customer delivery. This investigation was conducted to find out the source for customer delinquency for a single part in Tri-Industries. The conclusion was …

Entrance Capacity Of An Automated Highway System, Randolph W. Hall, Ali Nowroozi, Jacob Tsao

Faculty Publications

This paper evaluates the entrance capacity and queueing delay for Automated Highway Systems through use of simulations and analytical modeling. Queueing statistics are also used to determine the sustainable capacity of alternative concepts, taking trip length distribution and spacing between ramps into consideration. Based on safety-spacing headways (produced in a separate analysis), the most promising concept utilizes platoons both on the highway and on on-ramps. However, it is unclear whether comparable capacity can be achieved on exit, when vehicles must be decoupled from their platoons, and whether it is safe for vehicles to enter the highway in closely spaced platoons. …

The Role Of Intelligent Transportation Systems (Its) In Intermodal Air Cargo Operations, H.-S. Jacob Tsao, Asim Rizwan

Faculty Publications

If California were a nation, it would be the sixth largest economy in the world. Efficient goods movement is crucial to California’s economy. Air freight consists predominantly of high-value, time-sensitive or time-definite goods, e.g., electronic equipment, emergency shipments, overnight packages, etc. Timely delivery of air freight has been an important element of many manufacturing and service operations in California. Therefore, the air cargo industry is a vital part of the state’s economy. The objectives of this research include (a) investigating and suggesting how the public sector in California can assist the air cargo industry in providing efficient services to businesses …

A Systems-Based Methodology For The Construction And Representation Of Organizational Knowledge Systems, Willie James Mcfadden

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems-based, analysis methodology which constructs and represents an organization's knowledge system. The research inquiry was guided by four questions: (1) “what is an organizational knowledge system?” (2) “how can it be made explicit?” (3) “does the representation accurately depict the organization's perspective of their unique knowledge system?” and (4) “what results from the deployment of the organizational knowledge system methodology?” The resultant answers to these research questions advanced and established the theoretical conception of an organization's knowledge system through the development of a methodology that fosters the construction and …