Industrial Engineering Commons^™

Developing An Ergonomic Model And Automation Justification For Industrial Spraying Operations: A Case Study, Anthony Woods

Industrial Engineering Undergraduate Honors Theses

Industrial spraying tasks prove to be some of the most dull, dirty, and dangerous jobs in the modern day. Although it is a ripe area for automation, justification methods do not typically account for the potential improvements in the ergonomics of a task from automating it. In addition, there is a gap in the ergonomics literature in formal methodologies to comprehensively evaluate an industrial spraying task ergonomically, including all relevant musculoskeletal elements. This research focuses on first developing a formal, comprehensive methodology for ergonomically evaluating industrial spraying tasks and attaining a final classification of the ergonomic ranking of the task. …

Subjectivity In Failure Mode Effects Analysis (Fmea) Severity Classification Within A Reliability Centered Maintenance (Rcm) Context, Marc Banghart, Kari Babski-Reeves, Linkan Bian, Lesley Strawderman

International Journal of Aviation, Aeronautics, and Aerospace

This research paper investigated subjectivity in the severity rating of failure modes within a risk analysis process. Although several risk analysis processes can be utilized, the study considered the application of Failure Modes Effects Analysis (FMEA) or Failure Modes Effects and Criticality Analysis (FMECA) due to its common use within the Aerospace Industry. The study investigated both differences in severity selection given varying amounts of experience as well as any association between severity selection and the provided input information. The main goal of the research was to investigate the impact of data quality on severity selection and to identify factors …

Transforming Yekaterinburg Into A Safe, Resilient-Smart And Sustainable City, S. A. Timashev, V. N. Alekhin, L. V. Poluyan, I. Fontanals, A. Gheorghe

Engineering Management & Systems Engineering Faculty Publications

The initiative (since 2014) project described in this paper is a product of a joint innovative research and implementation effort of the Civil Engineering and Architecture Institute, Ural Federal University, the Science and Engineering Centre "Reliability and Safety of Large Systems and Machines", Ural Branch Russian Academy of Sciences (both Yekaterinburg), Start-up OptiCits, Barcelona, Spain and the Old Dominion University, Norfolk, VA, USA. The project is based on using the MAICS convergent technology [1] to create a versatile multi-purpose tool for optimizing the science and art of risk based governance of resilience-smart and sustainable city infrastructure and communities operating in …

Handling Of Syringe Sharps In A Non-Incineration Health Care Waste Disposal, Tito Mwinuka

Tanzania Journal of Engineering and Technology (TJET)

An attempt has been made by the R&D team of the University of Dar es Salaam to design and manufacture two needle cutter prototypes, a manually operated and an automatic needle cutter to be used in rural and urban areas, respectively. This is part of the UNDP and WHO efforts aimed at promoting the non-burn medical waste disposal technologies in developing countries such as Argentina, India, Latvia, Lebanon, Philippines, Senegal, Tanzania and Vietnam. The project also involves designing and manufacturing of the autoclaves for sterilizing of needle cutters and other infectious medical waste. The use of needle cutters in hospitals …

Airport Security Investment Model, Joshua Daniel Bolton

Graduate Theses and Dissertations

In an increasingly mobile and diverse world, it is difficult to quantify the risk, or danger, associated with traveling. Airports have suffered greatly for being unable to define potential risks and protect against them. Intelligent adversary risk is a complicated high-level issue for many airports. Airports are targeted because of the large amount of people in a confined space and the social, economic, and psychological impact of terrorist attacks on the American people. In the months following September 11th, 2001, the airline industry in the United States lost $1.1 billion in revenue. The American people stayed grounded, for fear of …

Quantitative Analysis Of Regenerative Energy In Electric Rail Traction Systems, Mahmoud Saleh, Oindrilla Dutta, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper aims at determining the influential factors affecting regenerative braking energy in DC rail transit systems. This has been achieved by quantitatively evaluating the dependence of regenerative energy on various parameters, such as vehicle dynamics, train scheduling, ground inclination and efficiency of the electrical devices. The recuperated power and energy have been presented by a mathematical model, comprising of a set of empirical forms, which allows for thorough analysis. A detailed simulation model of a typical DC-traction system has been developed to validate the developed empirical forms. The results verified the validity of the proposed mathematical model, and demonstrated …

Identification Of Reverse Engineering Candidates Utilizing Machine Learning And Aircraft Cannibalization Data, Marc Banghart

International Journal of Aviation, Aeronautics, and Aerospace

As military aircraft continue to remain in service and age, cannibalization of parts is increasing. Proactive identification of parts that are at high risk for cannibalization will inform engineering processes such as reverse engineering, thus allowing potentially reducing lead time to develop new parts. The research objective was to develop a causal structure that can be used for prediction of when cannibalization actions may occur. Bayesian networks allow encoding of causality between various descriptive features given a data set. The method utilized a tabu search algorithm, identified the underlying causal structure and the associated node probabilities. The method is then …

Incorporating A New Class Of Uncertainty In Disaster Relief Logistics Planning, Emre Kirac

Graduate Theses and Dissertations

In recent years, there has been a growing interest among emergency managers in using Social data in disaster response planning. However, the trustworthiness and reliability of posted information are two of the most significant concerns, because much of the user-generated data is initially not verified. Therefore, a key tradeoff exists for emergency managers when considering whether to incorporate Social data in disaster planning efforts. By considering Social data, a larger number of needs can be identified in a shorter amount of time, potentially enabling a faster response and satisfying a class of demand that might not otherwise be discovered. However, …

Developing A Risk Analysis Model To Improve Study Abroad Awareness, Tyler Spain

Industrial Engineering Undergraduate Honors Theses

As international education opportunities increase in popularity among U.S. college students (McMurtrie, 2007), it is becoming more and more necessary for study abroad organizations to be aware of the risks students face as they travel abroad. While some international cities are riskier than others, it can be difficult to distinguish between cities which truly carry a high degree of risk for visiting students, and which cities are only perceived to be risky based on various personal misconceptions. The University of Arkansas Office of Study Abroad & International Exchange currently lacks a way to quantifiably analyze the risk of study abroad …

Modeling Supply Chain Resiliency, Jeff A. Hazel

Industrial Engineering Undergraduate Honors Theses

Engineered Resilient Systems (ERS) is a Department of Defense (DoD) program focusing on the effective and efficient design and development of complex engineered systems throughout their life cycle. There is a growing literature with qualitative definitions of resilience and quantitative models for systems with one performance measure. This paper uses a quantitative resilience framework (the Framework for ERS) that includes system design options, reliability, threats, vulnerabilities, responses, and consequences assessed in multiple system performance measures. The framework assists in establishing a model for any system to evaluate resiliency. This paper applies this framework using Multiple Objective Decision Analysis (MODA) to …

A Simulation Model For Decision Support In Business Continuity Planning, Marissa Anne Mosunich

Master's Theses

Enterprises with a global supply network are at risk of lost revenue as a result of disruptive disasters at supplier locations. Various strategies exist for addressing this risk, and a variety of types of research has been done regarding the identification, assessment and response to the risk of disruption in a supply chain network.

This thesis establishes a decision model to support Business Continuity Planning at the first-tier supplier level. The decision model incorporates discrete-event simulation of supply chain networks (through Simio software), Monte Carlo simulation, and risk index optimization. After modeling disruption vulnerability in a supply chain network, costs …

Customer Complaint Management Systems (Ccms) In A Food Processing Industry, Maggie A. Macleish

Senior Honors Projects, 2010-2019

Abstract

The food processing industry must meet customers’ highest quality expectations at the lowest cost. I partnered with Nestlé’s pizza facility in Little Chute, WI, to improve the current customer complaint approach of the quality department, which aimed to improve product quality. To improve the total quality of the system, this project established a defensive method of addressing customer complaints. Some strategies used to improve the current Customer Complaint Management System (CCMS) include Quality Functional Deployment (QFD), fuzzy logic, Kano’s methods, Voice of the customer (VOC) and Go-See-Think-Do (GSTD). These strategies are all related, but have not previously been used …

A Simulation-Based Approach To Risk Assessment And Mitigation In Supply Chain Networks, Mamadou Seck, Ghaith Rabadi, Christian Koestler

Engineering Management & Systems Engineering Faculty Publications

We present in this paper a simulation-based approach to evaluate the risk associated with supply chain disruptions caused by failures in some supply chains nodes and measure the impact of such disruptions on supply chain key performance measures (KPIs) of interest. The proposed framework enables analysts and managers to repeatedly assess the risk to their supply chains based on various simulated scenarios and identify the most critical nodes whose disruption will have the highest impact on the KPIs of interest. As a result, companies can focus on the most critical supply chain assets and develop targeted mitigation plans that minimize …

Assessment Of Quality Stability Of Composite Flours Produced By Dar Es Salaam Smes, Leonard Rweyemamu

Tanzania Journal of Engineering and Technology (TJET)

A study was conducted to assess quality stability of cereal flours processed by food processing SMEs in Dar es Salaam. This product is obtained by mixing various cereal grains and is considered as of higher nutritional values in Tanzania. The shelf-life was predicted by determining water activity (aw) and moisture content (MC) levels and plotting the water sorption isotherms (MSI). Ninety per cent of investigated samples (N=78) were found packaged in the materials of various quality conditions. It was found that the packaging materials mostly used is plastic films (63%), paper packets/bags (26%), hard papers (3%), plastic jars (1%) and …

Security Analysis On Network Systems Based On Some Stochastic Models, Xiaohu Li

LSU New Orleans Theses and Dissertations

Due to great effort from mathematicians, physicists and computer scientists, network science has attained rapid development during the past decades. However, because of the complexity, most researches in this area are conducted only based upon experiments and simulations, it is critical to do research based on theoretical results so as to gain more insight on how the structure of a network affects the security. This dissertation introduces some stochastic and statistical models on certain networks and uses a k-out-of-n tolerant structure to characterize both logically and physically the behavior of nodes. Based upon these models, we draw several illuminating results …

Lemongrass And Cinnamon Essential Oils As Vitamin C Preservatives And Flavour Enhancers In Jam, Denice Byarushengo

Tanzania Journal of Engineering and Technology (TJET)

Lemongrass and cinnamon essential oils (LEO and CEO) are natural oils with high anti oxidation capacity, pleasant flavour, and various health benefits. Their ability to preserve vitamin C and flavour in jam have not been tested. In this study the performance of two essential oils (EOs) in preserving vitamin C and improving jam flavour were investigated. The EOs were produced by hydro-steam distillation of fresh lemongrasses and cinnamon leaves using a Clevenger apparatus. Jam samples were dosed with various concentrations of either single or mixed EOs and then stored at either room or refrigeration temperature. Samples were analysed for changes …

Noise Pollution In Maize Milling Smes, Erasto Elias

Tanzania Journal of Engineering and Technology (TJET)

Maize milling SMEs emit high levels of noise which can have adverse effects on human beings and therefore require controlling. This paper reports on a study that involved assessment and measurement of noise level in maize milling SMEs in DSM and Morogoro urban, gathering opinions of workers and the neighbouring population on noise problems, and suggesting solutions for noise control. Noise measurements in 41 SMEs were recorded from 89-103 dBA in DSM and 92-103 dBA in Morogoro near the milling machines. These values were higher than the safe level of 85 dBA for 8 hours working shift. Measurement also indicated …

2d Wireform Process Improvement, Katy Conlin, Carlo Ebora, Jordan Gamble

Mechanical Engineering

The body of this work has been created for Edwards Lifesciences in conjunction with senior project requirements. As such, the information produced and contained within is under a non‐disclosure agreement. As per request by sponsor, the body of the work will not be submitted to any outside parties, and the title page will serve as proof of completion.

Analysis Of Factors Affecting Technological Innovativeness In Engineering Enterprises In Tanzania, Emanuel Mjema

Tanzania Journal of Engineering and Technology (TJET)

This paper discusses the technological innovativeness in engineering enterprises in Tanzania and analyses the factors affecting the innovativeness. It starts by analyzing various concepts regarding innovation, then analyzed from documentary review factors affecting innovativeness and then analyzed the innovativeness in Tanzanian enterprises. From the documentary review it was learnt that the following key factors influence technological innovativeness: Existence of innovation management; Existence of market to absorb the products of innovation; Existence of partnership between the universities and the firms; Existence of positive culture and politics towards innovation; The government playing its role to influence innovation; Existence of the right knowledge; …

Entropy Applications In Industrial Engineering, Saeed Zamiri Marvizadeh

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Entropy is a fundamental measure of information content which has been applied in a wide variety of fields. We present three applications of entropy in the industrial engineering field: dispatching of Automatic Guided Vehicles (AGV), ranking and selection of simulated systems based on the mean performance measure, and comparison between random variables based on cumulative probability distributions.

The first application proposes three entropy-based AGV dispatching algorithms. We contribute to the body of knowledge by considering the consequence of potential AGV moves on the load balance of the factory before AGVs are dispatched. Kullback-Leibler directed divergence is applied to measure the …

Isolation And Characterisation Of Micro-Organisms With Industrial Importance From Sisal Bole Rots, Consolatha Mhaiki

Tanzania Journal of Engineering and Technology (TJET)

Investigation of microorganisms naturally acclimatized to Agave hybrid H 11648 (sisal bole rot) was conducted, with the aim of isolating and characterizing Aspergillus niger strains for industrial use. Microorganism were identified morphologically and then confirmation made by polymerase chain reaction (PCR). Results showed the existence of four major groups, listed in order of abundances as follows; Aspergilli (36.0±0.8) %, Penicillin (28.0±0.1) %, Yeast (15.0±1.6) %and Fusarium (10.0±0.12) %. The main groups of Aspergilli strains were A. nidulans, A. tamari and A. niger in ratios (3:2:2), respectively. Several endo-spore forming non-enteric gram (-) rods and coccid bacteria identified by API 20 …

Analysis Of Factors Affecting Technological Innovativeness In Engineering Enterprises In Tanzania, Emanuel Mjema

Tanzania Journal of Engineering and Technology (TJET)

This paper discusses the technological innovativeness in engineering enterprises in Tanzania and analyses the factors affecting the innovativeness. It starts by analyzing various concepts regarding innovation, then analyzed from documentary review factors affecting innovativeness and then analyzed the innovativeness in Tanzanian enterprises. From the documentary review it was learnt that the following key factors influence technological innovativeness: Existence of innovation management; Existence of market to absorb the products of innovation; Existence of partnership between the universities and the firms; Existence of positive culture and politics towards innovation; The government playing its role to influence innovation; Existence of the right knowledge; …

Post-Project Risk Perception And Systems Management Reaction, Baqer Alali

Engineering Management & Systems Engineering Theses & Dissertations

The objective of this research is to identify whether risk management in projects has any role in risk management in systems. Projects, systems, and risk management are three integral concepts in the management of various enterprises and agencies. Risk management is a common concept in systems and project processes. To avoid failures or crisis during their life cycles, projects and systems managers practice risk management. Projects and systems have well defined life cycles during which the risk is defined, controlled, and managed. Risk management is conducted in each phase of projects and systems. Projects are initiated to close certain operational …

Hazard Identification, Risk Assessment And Risk Control (Hirarc) In A Corrugated Box Manufacturer., Fraziel Barahim

Student Works (2010-2019)

Packaging is one of the biggest industries in the world. It involves paper, glass,metal, flexible and plastic. The corrugated paper packaging worldwide has been growing at 3% to 4% per annum. In line with the expansion of the corrugated paper packaging manufacturing, the potential hazards to human physical and health, property and the environment posed by its operations and production activities have created an increase in awareness and brought up safety issues amongst industry, government and public. The hazard identification and risk assessment plays a role in a number of areas in the safety management, including regulatory policies and guidelines, …

Potential Use Of Waterguard As A Disinfectant For Domestic Water Use, Yohana L

Tanzania Journal of Engineering and Technology (TJET)

been identified as an alternative method for treatment of domestic drinking water. The aim of this study was to investigate the effectiveness of Water Guard in disinfecting drinking water from different sources drawn from Kinondoni district, Dar es Salaam as well as to establish appropriate dosage that can be used during the treatment. Results showed that, a dose of 4.0mL per 20 litrer of water guard is sufficient for disinfection of urban water sources. The above prescribed doses provide 100% disinfection efficiency with residue chlorine of less than 0.3mg/l. Water with turbidity values of 30-35 NTU, chlorine dosage of 8mL/20 …

The Effect Of Rotation And Temperature On The Inhibition Performance Of Cashew (Anacardium Occidentale L.) Nut Shell Liquid On Co2 Corrosion Of Carbon Steel, J Mutasingwa

Tanzania Journal of Engineering and Technology (TJET)

A natural extract of cashew nut shells, Cashew Nut Shell Liquid (CNSL) was investigated as a corrosion inhibitor for carbon steel in 3% NaCl solutions saturated with CO2 gas using electrochemical techniques (i.e. potentiodynamic polarization and ac-impedance). The investigation was performed at different temperatures under static and dynamic conditions using a Rotating Disk Electrode (RDE). It was found that CNSL reduces the electrochemical processes taking place on carbon steel undergoing corrosion. The percentage inhibitor efficiency increases with increase in CNSL concentration and decreases with rise in temperature. Better performance at low CNSL concentration was registered under dynamic conditions and room …

Investigation Of The Effect Of Particle Size On Groundnut-Oil Solvent Extraction, S Manyele

Tanzania Journal of Engineering and Technology (TJET)

An investigation of the effect of particle size on the performance of vegetable oil recovery by solvent extraction is reported. Experiments were conducted using soxhlet extractor, groundnuts and n-hexane. Samples were grouped into mean particle sizes of 0.25, 0.75, 1.3, 3.3, and 7.5 mm using standard sieves. The effect of particle size was studied for extraction time intervals of 1, 2, 3, 4, 5 and 8 hours. The oil yield, oil recovered per kg solvent used, kg solvent lost per unit time, and the rate of extraction (kg oil recovered per hour) decreased with increasing particle size. Meanwhile, the percent …

The Systemic Nature Of Action Learning Programmes, G Mwaluko

Tanzania Journal of Engineering and Technology (TJET)

A lot of attention has been paid on action learning in the last four decades or so and the success of such programmes has also been widely publicized. But why have these programmes been so effective in helping organizations cope with change? Many authors state that the success of such programmes is due to the fact that they link learning to actions. Yet others claim that action learning programmes succeed because they involve employee empowerment and provide a much greater learning curve. In this paper the authors hold that action learning programmes succeed because they are partly systemic and can …

Identification Of Unbalanced Forces And Foundation Parameters Of Rotating Machines From Vibration Measurements, Nalitolela G

Tanzania Journal of Engineering and Technology (TJET)

A technique is described to use measured vibration data of a rotating machine and its foundation to identify unbalanced forces, stiffness and damping parameters of the mountings, and the parameters of the foundation. It is based on an idealisation treating the rotor, the machine structure and the foundation as rigid masses supported by springs and dampers. Operational vibration data of the machine and its foundation before and after the rotating unbalanced forces are perturbed by adding unbalanced mass to the rotor are used in the identification procedure. Once the parameters are identified, dynamic forces transmitted to the foundation can be …

Improving The Design Of Low Volume Sealed Roads In Tanzania, Mfinanga A

Tanzania Journal of Engineering and Technology (TJET)

The main objective of the study was to identify appropriate road designs for Low Volume Sealed Roads (LVSRs) with the aim of improving the design of such roads in Tanzania. The study was conducted in Dar es Salaam and Morogoro regions in Tanzania where data for LVSRs were collected from primary and secondary sources in the two regions. The study found that by using an improved pavement design method specifically meant for LVSRs results in cost savings for LVSRs of up to 51% compared with the conventional method of pavement design in Tanzania. The study recommends that the pavement design …