Industrial Engineering Commons^™

Assessment Of Risk Factors Related To Body Pain Complaints In Tanzania Construction Industry, Fatma K. Mohamed

Tanzania Journal of Engineering and Technology (TJET)

The construction industry is associated with risks that can result in musculoskeletal diseases. Although young male workers who are presumed to be healthy dominate the industry in Tanzania, body pain complaints have been widely reported. The aim of this study is to assess the prevalence and causes of body pains in workers. A cross-sectional study involving 396 workers was conducted. A chi square test was used for testing association of independent categorical variables and binary logistic regression analysis was used to determine predictors for body pain complaints. The results show that all study participants complained of at least one form …

Evaluation Of Environmental Management System For Small And Medium Enterprises In Dar Es Salaam, Tanzania, Juma M. Matindana

Tanzania Journal of Engineering and Technology (TJET)

A system that manages environmental issues of Small and Medium Enterprises (SMEs) from the time of acquisition of raw materials up to disposal of the product is not well clear, especially in Tanzania. Most of the studies have been conducted in the field of environment management but few of them address the evaluation of the management of SMEs activities with respect to the environment. Although the nature of activities of SMEs has little noticeable environmental implications at the individual level but the impact is large due to diversification and labour intensity of these SMEs. SMEs employ about 20% of the …

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

Kwad - Ksu All Weather Autonomous Drone, Nick Farinacci, Sebastian Gomez, Stewart Baker, Ed Sheridan

Symposium of Student Scholars

"KWAD" or "KSU all-Weather Autonomous Drone" project was sponsored by Ultool, LLC to the KSU Research and Service Foundation to create a lightweight drone capable of capturing HD video during all-weather operations. The conditions of all-weather operation include rainfall of one inch per hour and wind speeds of up to twenty miles per hour. In addition, a global minimum structural safety factor of two is required to ensure the system's integrity in extreme weather conditions. Potential mission profiles include autonomous aerial delivery, topological mapping in high moisture areas, security surveillance, search and rescue operations, emergency transportation of medical supplies, and …

Ambient Air Emission Profiles Of Polycyclic Aromatic Hydrocarbons Around A Typical University Power House In Nigeria, Oyetunji Okedere

Tanzania Journal of Engineering and Technology (TJET)

The level of electricity generation in Nigeria is presently grossly inadequate. Consequently, the productive sectors of the economy do not presently enjoy an uninterrupted supply of electrical energy from the country’s national grid and the downtime is in most cases too much. Using diesel-fueled electric power generators has become an attractive alternative to meet the shortfall in the energy supply gap. In this study, the levels of polycyclic aromatic hydrocarbons in the vicinity of the diesel-fueled electric power generators operated by Osun State University, Osogbo, Nigeria were investigated with a view to ascertain the priority levels and carcinogenic PAHs. Since …

Automated Visualization Pipeline For Near Real-Time Risk Management System, Paris Joslin

Industrial Engineering Undergraduate Honors Theses

In modern society, technological capabilities and the amount of data readily available to users continue to grow exponentially. Many have adopted these new capabilities but lack the infrastructure needed to efficiently utilize high-powered software and programs. Without a method to collect, store, and process large datasets in real-time, individuals and businesses can quickly become overwhelmed, inhibiting effective decision-making processes. There is potential to improve decision-making abilities by enhancing the computing infrastructure. To accomplish this task, we will explore the ideas surrounding High Performance Computing (HPC) and data visualization software. High Performance Computing is the ability to process data and perform …

Improving The Health And Safety Of Manufacturing Workers By Detecting And Addressing Personal Protective Equipment (Ppe) Violations In Real-Time With The Use Of Automated Ppe Detection Technology, Joseph Olufemi Fasinu

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Centers for Disease Control and Prevention (CDC) emphasized that Personal Protective Equipment (PPE) can significantly reduce the risk of occupational injuries and illnesses. However, improper use, failure to use, and other PPE-related violations can still result in injuries and fatalities. Eye and face protection violation has been one of the top 10 most frequently violated OSHA standards in fiscal years 2018, 2019, 2020, 2021 and 2022 consecutively. A common practice among safety professionals to ensure PPE compliance has been to physically inspect or monitor PPE usage among workers, which has been found to be unsustainable on a continuous real-time …

Novel Hitch Cargo Cart, Cesilio Sanchez Ramirez, Lance Haidet, Richard Lontoc, Tyler Selinka

Mechanical Engineering

This document presents the engineering design process used to develop, manufacture, and test a new and improved iteration of a hitch cart prototype. This process was performed by a team of four mechanical engineering seniors as part of California Polytechnic State University, San Luis Obispo’s senior design pathway. The goal of this project was to develop a sturdy and reliable iteration of our sponsor’s hitch cart prototype, that integrated the functionality of a vehicle hitch cargo platform and that of a height adjustable cargo cart into a single streamlined and easy to use product. This design could be used by …

Evaluating Safety And Productivity Relationship In Human-Robot Collaboration, Aayush Jain, Shakra Mehak, Philip Long, John D. Kelleher, Michael Guilfoyle, Maria Chiara Leva

Conference papers

Collaborative robots can improve ergonomics on factory floors while allowing a higher level of flexibility in production. The evolution of robotics and cyber-physical systems in size and functionality has enabled new applications which were never foreseen in traditional industrial robots. However, the current human-robot collaboration (HRC) technologies are limited in reliability and safety, which are vital in risk-critical scenarios. Certainly, confusion about European safety regulations has led to situations where collaborative robots operate behind security barriers, thus negating their advantages while reducing overall application productivity. Despite recent advances, developing a safe collaborative robotic system for performing complex industrial or daily …

Eagle Medical Tray Denesting & Debris Removal Process, Nicholas Allen Ungefug, Noah Chavez, Susana Shu-Lin Okhuysen, Michael Augustine Pennington

Industrial and Manufacturing Engineering

Eagle Medical Incorporated is a contract medical device packaging and sterilization company. The company purchases thermoformed medical packaging trays, which maintain the sterility of medical devices, from various manufacturers. To ensure packaging quality and to prevent cleanroom contamination, Eagle Medical inspects and sterilizes each blister tray that they order. This process is an essential non-value-added activity that creates a bottleneck. Cleanroom employees must stop packaging medical devices and attend to the processing of blister trays and packaging solutions. The blister trays arrive at Eagle’s facility in nested stacks. Vibration and movement during shipping further compresses the stacks, which makes separation …

Comparing Actively Managed Mutual Fund Categories To Index Funds Using Linear Regression Forecasting And Portfolio Optimization, Luke Weiner

Industrial Engineering Undergraduate Honors Theses

The global investment industry offers a wide variety of investment products especially for individual investors. One such product, index funds, which are younger than actively managed mutual funds, have typically outperformed managed funds. Despite this phenomenon, investors have displayed a tendency to continue investing in actively managed funds. Although only a small percentage of actively managed funds outperform index funds, the costs of actively managed funds are significantly higher. Also, managed fund performances are most often determined by their fund category such as growth or real estate. I wanted to answer the following question for individual investors: can we …

Predicting The Likelihood And Scale Of Wildfires In California Using Meteorological And Vegetation Data, Matthew Walters

Graduate Theses and Dissertations

Wildfires have devastating ecological, environmental, economical, and public health impacts through the deterioration of water and air quality, CO2 emissions, property damage, and lung illnesses. The early detection and prevention of wildfires allow for the minimization of these risks. The use of Artificial Intelligence (AI) in wildfire detection and prediction has been highly researched as a tool to assist firefighters in stopping wildfires in its early stages. The three common wildfire prediction categories include image and video detection, behavior prediction, and susceptibility prediction. Data such as climate, weather, vegetation, satellite images, and historical wildfire data is most commonly used. Many …

Réduction Des Risques Lors Des Interventions En Espace Clos : Développement D’Une Base De Connaissances Sur La Prévention Intrinsèque Et La Protection Collective, Damien Burlet-Vienney, Yuvin Chinniah, Ali Bahloul, Andrés Felipe González Cortés, Capucine Ouellet, Abdallah Ben Mosbah

Rapports de recherche scientifique

Les espaces clos parmi les plus courants dans les milieux de travail au Québec sont les réservoirs, les cuves, les puits d’accès, les égouts, les tuyaux et les citernes. Les entrées en espace clos sont effectuées, entre autres, pour des raisons de maintenance (p. ex. : réparation, inspection, nettoyage, déblocage). Les risques pour la santé et la sécurité des travailleurs impliqués sont variés : atmosphérique, chimique, biologique, mécanique, physique ou liés à une chute ou au non-respect des principes ergonomiques. Dans le cadre de ce projet, une moyenne de 2,6 décès par an en espace clos au Québec sur la …

Quantitative Methods For Total Lifecycle Risk Likelihood And Impact Assessment In Sustainable Product Design Decision Making, Christian Enyoghasi

Theses and Dissertations--Mechanical and Aerospace Engineering

Sustainable products promise significant economic, environmental, and societal benefits. Numerous methods are available for use during the new product development process to identify alternate product designs that optimize sustainability performance. Once any such design is selected and the product is launched, many uncertainties are likely to affect its performance over the total lifecycle. Such uncertainties give rise to risks that can influence the overall product sustainability performance. However, comprehensive quantitative methods to evaluate the likelihood or the impact of different risks to enable sustainable product design decision making are lacking.

This research aims to address this gap by developing a …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

Optimization Of Vaccine Supply Chains In Low- And Middle-Income Countries Utilizing Drones, Maximilian Kolter

Graduate Theses and Dissertations

Despite tremendous efforts from governments and humanitarian organizations, millions of children in low- and low-middle-income countries (LICs and LMICs) are still excluded from the benefits of immunization. The vaccine distribution in LICs and LMICs is challenging for several reasons, such as limited cold chain capacities, vaccine wastage, uncertain demand, and lack of access to immunization services. A promising avenue to address these issues is the utilization of drones for vaccine delivery. Drones can fly at high speed on direct paths and could enable on-demand deliveries to mitigate limited storage capacities. Further, their independence of road networks could allow them reaching …

Resilience-Driven Post-Disruption Restoration Of Interdependent Critical Infrastructure Systems Under Uncertainty: Modeling, Risk-Averse Optimization, And Solution Approaches, Basem A. Alkhaleel

Graduate Theses and Dissertations

Critical infrastructure networks (CINs) are the backbone of modern societies, which depend on their continuous and proper functioning. Such infrastructure networks are subjected to different types of inevitable disruptive events which could affect their performance unpredictably and have direct socioeconomic consequences. Therefore, planning for disruptions to CINs has recently shifted from emphasizing pre-disruption phases of prevention and protection to post-disruption studies investigating the ability of critical infrastructures (CIs) to withstand disruptions and recover timely from them. However, post-disruption restoration planning often faces uncertainties associated with the required repair tasks and the accessibility of the underlying transportation network. Such challenges are …

Modeling And Solving The Outsourcing Risk Management Problem In Multi-Echelon Supply Chains, Arian A. Nahangi

Master's Theses

Worldwide globalization has made supply chains more vulnerable to risk factors, increasing the associated costs of outsourcing goods. Outsourcing is highly beneficial for any company that values building upon its core competencies, but the emergence of the COVID-19 pandemic and other crises have exposed significant vulnerabilities within supply chains. These disruptions forced a shift in the production of goods from outsourcing to domestic methods.

This paper considers a multi-echelon supply chain model with global and domestic raw material suppliers, manufacturing plants, warehouses, and markets. All levels within the supply chain network are evaluated from a holistic perspective, calculating a total …

Decision Making Within An Nfl Context Using Multiple Objective Decision Analysis, Lawson Porter

Industrial Engineering Undergraduate Honors Theses

The National Football League (NFL) is the most popular sports league in the world, with millions of viewers every game and billions of dollars generated every season. Statistics are an important part of an NFL team’s business operating model and contribute greatly towards their decision making. Every season, general managers try to sign players that give the team the highest probability of winning games throughout the year. There are many factors that go into this decision, including the amount of money the team has to spend and the value that available players can bring to a team. Teams must abide …

Fuzzy Cognitive Map-Based Knowledge Representation Of Hazardous Industrial Operations, Francesco Longo, Antonio Padovano, Letizia Nicoletti, Caterina Fusto, Mohaiad Elbasheer, Rafael Diaz

VMASC Publications

Hazardous industrial operations are highly stochastic, still human-dependent, and risky. Operators working in such an environment must understand the complex interrelation between several factors contributing to safe and effective operations. Therefore, being able to predict the effects of their actions on provoking or mitigating possible accidents is crucial. This study aims to utilize fuzzy cognitive maps (FCM) to model the expert’s reasoning about occupational health and safety (OHS) in confined space. This knowledge is used by operators to build their mental models. The developed FCM displays all the possible incidents of a confined space and links these incidents with all …

Intruder Preference And Route Selection: A Gis Data Approach, Griffin Mathews

Industrial Engineering Undergraduate Honors Theses

The Department of Homeland Security (DHS) requested an Engineering Research and Development Center study incorporating modeling and simulation to determine the selection, amount, and optimal location of sensor suites along the U.S. Border. The study objective is to maximize the probability of detection and apprehension of illegal elements attempting to enter. A study on intruders and their preferences were conducted to create an intruder preference value map to determine the preferred intruder routes taken after crossing the border. The results of this research were integrated into another study on the selection and simulation of sensor suites.

Intruder context and preferences …

Implications Of Variability Of Electromyographic Measurements For Assessing Localized Muscle Fatigue, Hamad Nasser Alasim

Graduate Theses, Dissertations, and Problem Reports (ETD)

The impact of work-related musculoskeletal disorders (WMSDs) is enormous due to a combination of direct and indirect costs associated with healthcare, lost workdays and human suffering. Because of the established relationship between Localized Muscle Fatigue (LMF) development and WMSDs, and in order to reduce and/or prevent WMSDs in workplaces, different fatigue assessment methods have been developed. Surface Electromyography (SEMG) is a commonly used LMF assessment technique. The SEMG signals are typically analyzed in time and frequency domains to predict LMF based on a relative change with respect to initial, or under no-fatigue conditions. Quantifying such change, however, relies on the …

Reviewing The Potential And Constraints Of Modified Technology Options For Faecal Sludge Management In Dar Es Salaam, Tanzania, Amour Seleman

Tanzania Journal of Engineering and Technology (TJET)

Cities in the developing world face the challenge of safe management of faecal sludge because of rapid population growth that overwhelms the sanitation infrastructure and services. In developing countries, only 50% of faecal sludge (FS) generated is safely managed the remaining portion is haphazardly disposed of in the environment risking public health and environment. In response to the urgent need for safely managed sanitation services, technological options for containment, desludging and transportation of FS are being modified. This paper reviewed current desludging practices and the potential of modified technological options for addressing FSM at containment, desludging, and transportation in Dar …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Material Flow Analysis As A Decision Supporting Tool For Faecal Sludge Resource Recovery: Mathematical Formulation And Quantification, Isabela Thomas Mkude

Tanzania Journal of Engineering and Technology (TJET)

In this work, a conceptual framework for faecal sludge (FS) management and resource recovery in Dar es Salaam city was developed. Material Flow Analysis (MFA) approach was used to assess and quantify the current materials and nutrients to support on decisions for nutrient recovery and minimize environmental pollution in three unplanned settlements of Manzese, Keko and Kipawa in Dar es Salaam city. Nitrogen and Phosphorus were chosen as indicators for the evaluation of the process. The results showed that about 75% of the Dar es Salaam city population relies on pit latrines and 15% connected to septic tanks, translating to …

Linking Quality Management Practices With Performance Of Manufacturing Industries In Tanzania, Mussa Iddi Mgwatu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Local products of manufacturing industries in Tanzania are subjected to intense competition in the markets. Product quality is one of key factors that play a considerable role for manufacturing industries to win the competitive advantage. This paper attempts to analyse the extents of quality management practices (QMP) and manufacturing performance (MP) as well as to examine the linkage between practices and performance. Data was collected from seventy-eight (78) manufacturing industries in Dar es Salaam region using questionnaires comprising of both single-item and multi-item questions. Descriptive statistics was used to quantify the extent of quality management practices and manufacturing performance (MP) …

Quantifying Impact Of Cyber Actions On Missions Or Business Processes: A Multilayer Propagative Approach, Unal Tatar

Engineering Management & Systems Engineering Theses & Dissertations

Ensuring the security of cyberspace is one of the most significant challenges of the modern world because of its complexity. As the cyber environment is getting more integrated with the real world, the direct impact of cybersecurity problems on actual business frequently occur. Therefore, operational and strategic decision makers in particular need to understand the cyber environment and its potential impact on business. Cyber risk has become a top agenda item for businesses all over the world and is listed as one of the most serious global risks with significant financial implications for businesses.

Risk analysis is one of the …

Robust Allocation Of Funds For Nonstructural Flood Risk Mitigation In Coastal Louisiana, Simón Gómez Sierra, David R. Johnson, Matthew P. Shisler, Zachariah T. Richardson

The Summer Undergraduate Research Fellowship (SURF) Symposium

Coastal Louisiana is a critical economic, ecological and cultural asset, acting as a major hub for waterborne commerce, fisheries, and the petrochemical industry, and also as one of the world’s unique wetlands. Unfortunately, this rich environment is in great danger from the threat of hurricanes and storm surge flooding. Direct economic losses are estimated to average $2.7 billion per year under current conditions, and this could increase to $12 billion a year, or more, within 50 years if nothing is done. To prevent this catastrophe, Louisiana has developed a Comprehensive Master Plan for a Sustainable Coast, which plans to spend …

Risk Assessment Of Dropped Cylindrical Objects In Offshore Operations, Adelina Steven

LSU New Orleans Theses and Dissertations

Dropped object are defined as any object that fall under its own weight from a previously static position or fell due to an applied force from equipment or a moving object. It is among the top ten causes of injuries and fatality in oil and gas industry. To solve this problem, several in-house tools and guidelines is developed over time to assess the risk of dropped objects on the sub-sea structures. This thesis focuses on compiling and comparing those methods in hope to improve the recommended practices available in the market. A simple modification is done on the in-house tools …

Design Of A Distributed Real-Time E-Health Cyber Ecosystem With Collective Actions: Diagnosis, Dynamic Queueing, And Decision Making, Yanlin Zhou

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, we develop a framework for E-health Cyber Ecosystems, and look into different involved actors. The three interested parties in the ecosystem including patients, doctors, and healthcare providers are discussed in 3 different phases. In Phase 1, machine-learning based modeling and simulation analysis is performed to remotely predict a patient's risk level of having heart diseases in real time. In Phase 2, an online dynamic queueing model is devised to pair doctors with patients having high risk levels (diagnosed in Phase 1) to confirm the risk, and provide help. In Phase 3, a decision making paradigm is proposed …