Industrial Engineering Commons^™

Accuracy Analysis For Kolmogorov Entropy Used In Studying The Chaotic Dynamics Of Cfb Reactors Based On Solids Concentration Fluctuations, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

A study on the chaotic dynamics of a high flux circulating fluidized bed (CFB) riser (10-m high and 76-mm i.d.) using the maximum likelihood estimate of the Kolmogorov entropy (KML) is reported. The signals used were measured by using a solids concentration fiber optic probe, accuracy of which is reported based on statistical analysis. The sensitivity analysis of the parameters used for computing KML was conducted to identify optimum settings, based on the standard error, s(KML) and the nature of PDF of the b-values from the reconstructed phase space trajectories. The length of time series, N, sampling frequency, fs, and …

Improving The Availability Of Manufacturability Information Through Decentralization Of Process Planning, Eliab Opiyo

Tanzania Journal of Engineering and Technology (TJET)

Process planning is part of the general product development and production process that usually follows design and precedes manufacturing. Manufacturability and process planning information in general play central role in many product development and production activities, including paradoxically, conceptual and detail design - the activities that take place before process planning. The need of conducting some of the process planning activities formally before or during design is thus rather obvious. One of the main research issues is therefore the identification of the process planning activities that can be performed before the traditional process planning phase and handling of the process …

Development Of A Genetic Algorithm Based Search Strategy Suited For Design Optimisation Of Internal Combustion Engines, Nalitolela G

Tanzania Journal of Engineering and Technology (TJET)

Engine design optimisation is a multi-objective, multi-domain problem in a discontinuous design space. The state of the art of optimisation techniques shows that only methods of direct and adaptive search are appropriate for this type of problem. These include, adaptive random search, simulated annealing, evolution strategies and genetic algorithms. Of these methods, the genetic algorithms have been shown to be the most suited for the optimisation of multi-modal response functions in a discontinuous design space. This paper considers the important characteristics of genetic algorithms and their adaptation for use in parametric design optimisation of internal combustion engines. In order to …

Modeling Of A Spray Assisted Natural Draft Cooling Tower, Kaunde K

Tanzania Journal of Engineering and Technology (TJET)

Cooling towers are one of the largest heat and mass transfer devices that are in common use. A novel type of cooling tower has been proposed in which air flow rate into the tower is drawn by ejector action of sprays instead of fans as is done in conventional mechanical forced or induced draft cooling towers. This novel design offers the potential of saving the energy cost for driving the fan. The paper presents mathematical models for momentum transfer which is the driving force causing the entrainment of air. Also the heat transfer model for co-current flow of liquid and …

Why Divide By (N-1) For Sample Standard Deviation?, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

In statistics, the sample standard deviation is a widely used measure of the variability or dispersion of a data set. The standard deviation of a data set is the square root of its variance. In calculating the sample standard deviation, the divisor is the number of samples in the data set minus one (n-1) rather than n. This often confuses students. This paper offers a quick overview of why the divisor is (n-1) for calculating the sample standard deviation.

How Do You Interpret A Confidence Interval?, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

A confidence interval (CI) is an interval estimate of a population parameter. Instead of estimating the parameter by a single value, a point estimate, an interval likely to cover the parameter is developed. Many student incorrectly interpret the meaning of a confidence interval. This paper offers a quick overview of how to correctly interpret a confidence interval.

Preliminary Estimates Of Building Cost And The Lowest Evaluated Tender, Harriet Eliufoo

Tanzania Journal of Engineering and Technology (TJET)

The paper has investigated and established to what extent are preliminary estimates of building costs close to the lowest evaluated tender and how geographical proximity influences the variance between preliminary estimate and the lowest evaluated tender. A multiple case study constituting 43 building projects in Tanzania were statistically analysed covering a period from 1995- 1999. Findings reveal a significant variance exists between the quantity surveyor’s preliminary estimate figure and the lowest evaluated tender; and that the variance between the quantity surveyor’s figure and the bidder is small when the proposed building project is geographically closer to the quantity surveyor’s base. …

Multi-Phase Flow Analysis In Oil And Gas Engineering Systems And Its Modelling, Orlando F. Ayala, Luis F. Ayala, Orlando M. Ayala

Engineering Technology Faculty Publications

[Introduction] Two-phase flow is very common in industrial processes and its applications were already in use in ages as remote as the era of Archimedes. At the present time, many industrial processes rely on multi-phase phenomena for the transport of energy and mass or for material processing. During the last century, the nuclear, chemical and petroleum industries propelled intense research activity in the area. Their efforts have been aimed at the demystification of the mechanisms taking place during this complex flow situation.

Geometric Programming As A General Method For Phase And Reaction Equilibrium Calculations, Godwill Mrema

Tanzania Journal of Engineering and Technology (TJET)

Geometric programming has been used to calculate a large mtmber ofdifferent ideal and non-ideal equilibria, including, for reaction and For non-ideal Systems the primal program is solved a number Of times With the nan-ideal terms fixed each time. After each primal solution, the nan-ideal terms are "'hdated using the corresponding dun! solution. This iteration generally converges. We have included one counter-example, where the failure is caused by the equation Of state, which Cannot giu• correct roots.

Correlation Of Numerical Ability And Quality Technician Best Performers In Manufacturing Quality Control Applications, Charles Wesley Shelton

All-Inclusive List of Electronic Theses and Dissertations

The occupation of Quality Technician has many duties requiring numerical operations. Business and industry place considerable emphasis on numerical ability when evaluating the performance of a Quality Technician. In this study, the numerical ability and performance classification of Quality Technicians were analyzed using a correlation analysis. lll A single case study was used to investigate this relationship. A modified Delphi Method was used to determine characteristics of a Quality Technician. Quality Technicians were evaluated by their direct supervisor and completed a standardized numerical ability test. The evaluations by the supervisor were used to classify each technician based on their performance. …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Gasification Kinetics Of Ultrafine Coal Char Oxidation In Flame Reactions, G John

Tanzania Journal of Engineering and Technology (TJET)

Pulverized coal combustion is exceedingly complex with a  vast number of variables. In order to avoid the complications associated with the burning of coal char, a controlled study has been made of the oxidation of fine graphite in laminar methane-air flame as a contribution to the understanding of the more complex phenomena of the gasification kinetics of the char. The burning of methane is equivalent to the burning of volatiles and graphite oxidation is similar to that of coal char. Aspects of this have been simulated in experimental and computational studies of 4pm diameter graphite particle burning in methane -air …

Investigation Of The Stability Of Engine – Governor System Operated At Low Speeds, Cuthbert Mhilu

Tanzania Journal of Engineering and Technology (TJET)

During diesel engine operation, a tendency for the engine not to achieve a  steady idling speed has often been observed. During idling speed the engine tends to either race or stall as a result of poor and incorrect metering of the fuel, which is required for the combustion process and if severe, the engine will stop firing completely. 111 this research an investigation was made to establish knowledge on diesel engine stability operated at low speeds. The influence of a governor of an engine in the control of the engine speeds has also been investigated. In order to obtain information …

Study On Vortex Formation In The Pouring Basin By Direct Observation, J Runyoro

Tanzania Journal of Engineering and Technology (TJET)

Although the formation of vortex on the free surface of liquid draining from a container is often observed, relatively little is known about the phenomenon. When a liquid is drained from a container such as a bathtub through a bottom orifice, a dip on the surface known as vortex is formed. The vortex first appears as a small dimple in the free surface, which suddenly forms a cone-shaped hole. The vortex causes turbulences, which draws in air down into the orifice (drain). Generally, the issue of vortex formation is so common in our lives that possibly its occurrence seems to …

The Decomposition Kinetics Of Solids Thermodynamic Evidence For The Enthalpy Driven Cooling Of Reaction Environment Part 2, Akwilapo D

Tanzania Journal of Engineering and Technology (TJET)

The analysis of non-isothermal kinetic data for the decomposition of calcium carbonate, CaC03 (s) ~ CaO (s) + C02 (g) in flowing nitrogen, shows that the decomposition of solids is accompanied by self-cooling/heating of the reaction environment depending on the sample mass and heating rate. The correctness of the kinetic model is established by the calculation of the enthalpy change of the reaction. This is the thermodynamic evidence of endothermic enthalpy driven cooling of the reaction environment. The enthalpy change LJH = 179.33 kJmol-1 estimated from this work for the dissociation of CaC03 is in agreement with LJH = 179.17 …

Measuring Plant-Wide Energy Savings, J. Kelly Kissock, Carl Eger

Mechanical and Aerospace Engineering Faculty Publications

This paper presents a general method for measuring plant-wide industrial energy savings and demonstrates the method using a case study from an actual industrial energy assessment. The method uses regression models to characterize baseline energy use. It takes into account changes in weather and production, and can use sub-metered data or whole plant utility billing data. In addition to calculating overall savings, the method is also able to disaggregate savings into components, which provides additional insight into the effectiveness of the individual savings measures.

Although the method incorporates search techniques and multi-variable least-squares regression, it is easily implemented using data …

Knowledge Representation, Organization, And Formalization For Simulation Modeling Of Discrete Manufacturing System, Jung Hung Ma

All-Inclusive List of Electronic Theses and Dissertations

Simulation is an useful tool that helps managers making decision by designing models for real systems. It helps companies to study behaviors of real systems hy analyzing computer models and improve the systems based on the experiments' results. However, cross-domain knowledge requirement and lack of tools facilitate modeling are the main reasons that make industries hesitate to use simulation to assist making decision. This research is an attempt to develop robust knowledge representations for discrete manufacturing system and conceptual simulation model. A modeling methodology was proposed to utilize these knowledge representations (KRs) for developing conceptual simulation models from application domain …

A Multi-Server Markovian Queueing Model With Primary And Secondary Services, Valentina Klimenok, Srinivas R. Chakravarthy, Alexander Dudin

Industrial & Manufacturing Engineering Presentations And Conference Materials

We study a multi-server queueing model in which the arrivals occur according to a Markovian arrival process. An arriving customer either (a) is lost due to all main servers being busy; or (b) enters into service with one of the main servers and leaves the system (as a satisfied primary customer); (c) enters into a service with one of the main servers, gets service in self-service mode, and is impatient to get a final service with one of the main servers, may leave the system (as a dissatisfied secondary customer); or (d) enters into service with one of the main …

Comparative Study Of The Dynamics Of Circulating Fluidized Bed Riser And Downer Of Equal Diameters, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

The microscopic flow dynamics of the 100-mm internal diameter riser/downer circulating fluidized bed (CFB) unit were monitored using a solids concentration fiber optic probe. The comparison was conducted by comparing radial profiles Of the dynamic parameters derived from time-series analysis techniques (statistical and chaos analyses). The solids concentration signals used were recorded under similar operating conditions (gas velocity of 8.0 m/s and solids flux of 100 kg/m2s). Similar axial elevations were compared (entrance and fully developed sections of die reactors). A1 each loca!ion, the signals were sampled a! afrequency of 970 Hz for duration of 30 seconds. It was observed …

Comparison Of Sampling Methods For Flatness Evaluation Using Cmm, Ashish Singhal

All-Inclusive List of Electronic Theses and Dissertations

Efficient part feature verification using Coordinate Measuring Machine (CMM) requires efficient sample point selection as well as accurate zone fitting. This work deals with flatness tolerance evaluation and the Least- Square (LS) technique is used to compute tolerance zone. In regard to the sampling strategy there are several methods commonly employed in Coordinate Measuring Machine inspection literature. The appropriate method is selected according to the accuracy requirement, the geometry features of the work piece, and the condition of the machine producing the work piece. This research focuses on the five sampling methods: Hammersley sequence sampling, Halton-Zaremba sequence sampling, Random sampling, …

Lean Energy Analysis: Identifying, Discovering And Tracking Energy Savings Potential, J. Kelly Kissock, John Seryak

Mechanical and Aerospace Engineering Faculty Publications

Energy in manufacturing facilities is used for direct production of goods, space conditioning, and general facility support such as lighting. This paper presents a methodology, called lean energy analysis, LEA, for graphically and statistically analyzing plant energy use in terms of these major end uses.

The LEA methodology uses as few as 60 easily obtainable data points. Multivariable change-point models of electricity and natural gas use as functions of outdoor air temperature and production data are developed. The statistical models are used to subdivide plant energy use into facility, space-conditioning and production-related components.

These breakdowns suggest the savings potential from …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Derivation And Analysis Of Maximum And Conditional Work Of An Electromagnet In Relays With Small Gaps And Constant Armature Load, Dominic Chambega

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

How To Increase The Ability Of A Student To Learn, Srinivas R. Chakravarthy

Industrial & Manufacturing Engineering Presentations And Conference Materials

An instructor is always challenged when covering the materials in a course (according to the syllabus) and at the same time making sure that all students have the opportunity to learn and understand the materials presented in the classroom. In this paper we will present some ideas and tools that enable one to try to achieve a balance. These are based on the author’s experience and perspective in teaching deterministic and stochastic operations research courses.

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Graphical Display And Data Structure For Virtual Prototyping, David William Manry

Doctoral Dissertations

One of the goals of engineering firms is to bring better products to market faster. Although concurrent engineering can aid in this endeavor, it requires that all areas of an organization work simultaneously. Thus, current product data must be accessible to everyone.

Virtual prototyping allows this simultaneous exchange of information. Virtual prototyping not only replaces the physical model in product development with a virtual model, but also it goes further by allowing data associated with each part of the model to be accessed. This data is not limited to just geometric properties but could contain other quantifiable properties, such as …

A Comparison Of Three Numerical Methods Of Solutions Of Equations Describing Unsteady Gas Flow At Pipe Boundaries In Reciprocating Compressor Systems, M Mkumbwa

Tanzania Journal of Engineering and Technology (TJET)

A number of finite difference schemes are available to study pressure fluctuation effects in unsteady pipe flows. This paper presents a comparison Of the predictions made by three such schemes of unsteadyjlow effects in a number of reciprocating compressor pipe-work systems. The finite difference schemes considered were;- a first order scheme known as the method Of characteristics, two second order schemes which were the Leapfrog method and MacCormacVs method. A reciprocating compressor simulation computer program was coupled with equations describing the cylinder thermodynamic processes with the pipe flow equations for steady non-homentropicflow. The comparison presented takes into account both the …

Study Of Human Factors Variables In Battle Outcome Prediction Models, David Andrew Glovier

Engineering Management & Systems Engineering Theses & Dissertations

Over time there have been many improvements in models that are used to predict the outcome of battles. Currently there is much supposition and speculation surrounding the use of human performance related factors as additional inputs to battle simulation models to improve their accuracy. However there is no conclusive scientific evidence which shows that these factors do make a significant difference. This study investigates the use of factors that may impact on the human performance directly or indirectly in battle prediction models. These factors consist of traditional human factors and external factors that may influence the human performance. The research …

The Effects Of Human-Computer Communication Mode, Task Complexity, And Desire For Control On Performance And Discourse Organization In An Adaptive Task, Cristina Bubb-Lewis

Psychology Theses & Dissertations

The present study examined how different communication patterns affected task performance with an adaptive interface. A Wizard-of-Oz simulation (Gould, Conti, & Hovanyecz, 1983) was used to create the impression of a talking and listening computer that acted as a teammate to help participants interact with a computer application.

Four levels of communication mode were used which differed in the level of restriction placed on human-computer communication. In addition, participants completed two sets of tasks (simple and complex). Further, a personality trait, Desire for Control (DC), was measured and participants were split into high and low groups for analysis. Dependent measures …

Comparing Traditional Statistical Models With Neural Network Models: The Case Of The Relation Of Human Performance Factors To The Outcomes Of Military Combat, William Oliver Hedgepeth

Engineering Management & Systems Engineering Theses & Dissertations

Statistics and neural networks are analytical methods used to learn about observed experience. Both the statistician and neural network researcher develop and analyze data sets, draw relevant conclusions, and validate the conclusions. They also share in the challenge of creating accurate predictions of future events with noisy data.

Both analytical methods are investigated. This is accomplished by examining the veridicality of both with real system data. The real system used in this project is a database of 400 years of historical military combat. The relationships among the variables represented in this database are recognized as being hypercomplex and nonlinear.

The …