Industrial Engineering Commons^™

A Decision Modeling For Phasor Measurement Unit Location Selection In Smart Grid Systems, Seung Yup Lee

Wayne State University Theses

As a key technology for enhancing the smart grid system, Phasor Measurement Unit (PMU) provides synchronized phasor measurements of voltages and currents of wide-area electric power grid. With various benefits from its application, one of the critical issues in utilizing PMUs is the optimal site selection of units.

The main aim of this research is to develop a decision support system, which can be used in resource allocation task for smart grid system analysis. As an effort to suggest a robust decision model and standardize the decision modeling process, a harmonized modeling framework, which considers operational circumstances of component, is …

Thermolysis And Kinetics Of Scrap Tyre And Bagasse For Energy Utilization, Petro Ndalila

Tanzania Journal of Engineering and Technology (TJET)

The increase of energy demand has brought concern to find alternative fuel that will at least sustain the requirement. Bagasse and scrap tyre are waste generated in our industrial activities, which can be used in energy production to subsidize the demand. This paper, aim to study the decomposition behaviour and kinetics of biomass (bagasse) and scrap tyre as preliminary stage of fuel sample analysis to be considered for energy production in gasification/combustion or pyrolysis facilities. The behaviour demonstrated with thermogravimetric analyzer (TGA), shows that all samples have high volatile amount release, 84.21% for bagasse and 85.08% for scrap tyre, which …

Open Source Kiswahili Spell Checker (Sw-Tz), Hashim Twaakyondo

Tanzania Journal of Engineering and Technology (TJET)

Different English software products are localized into many native languages spoken around the world, the most popular software products localized so far are word processing software and web browsers. The effort has begun to localize these software products in Kiswahili language which is widely spoken in Tanzania, East and Central Africa. Kiswahili is an official language of Tanzania, and is a national language in Uganda and Kenya. To make these software products useful to Kiswahili speaking community particularly in Tanzania a new Kiswahili spell checker has been developed and, it uses most of the Kiswahili words spoken in Tanzania and …

2d Autocad Geometric Data Extraction And Post Processing For Numerical Control, Tito Mwinuka

Tanzania Journal of Engineering and Technology (TJET)

In this paper, a method of extracting 2D geometric data from AutoCAD drawing and post processing for Numerical Control (NC) is presented. Geometric data already available in the Drawing Interchange Files (DXF) can be utilized to accurately and economically prepare part programs for controlling NC/CNC machine tools. AutoCAD, being general purpose software, stores its geometric data in a form that cannot be directly applied for automatic generation of Numerical Control (NC) codes. The way around the discrepancy between the structure of a drawing database (DXF files) and the information requirement for part programming is addressed in this work. NC programming …

Optimization Of Strategic Planning Processes For Configurable Products: Considerations For Global Supply, Demand, And Sustainability Issues, Edward Lawrence Umpfenbach

Wayne State University Dissertations

The assortment planning problem is to decide on the set of products that a retailer or manufacturer will offer to its customers to maximize profitability. While assortment planning research has been expanding in recent years, the current models are inadequate for the needs of a configurable product manufacturer. In particular, we address assortment planning for an automobile manufacturer. We develop models to integrate assortment planning and supply chain management, designed for use by a large automaker in its strategic planning phase. Our model utilizes a multinomial logit model transformed into a mixed integer linear program through the Charnes-Cooper transformation. It …

Optimization Of Biomass Logistics System Using Genetic Algorithm And Particle Swarm Optimization For Biofuel Production, Ethel Regina Martinez-Schabez

Open Access Theses & Dissertations

As time goes by, Renewable Energy keeps proving to be an important and potential replacement for fossil fuels. All the different types of Renewable Energy offer a relief to the environmental aftermaths of the prolonged reliance on fossil fuel energy. Bioenergy is one of the types of Renewable Energy that can help by minimizing the emissions of fossil fuels. The Energy Independence and Security Act mandates the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. Biomass and Biofuels can clearly become a significant aid to sustainably supply energy in …

An Approach To Power Efficiency Determination In The Solar Energy Systems Using Central Composite Design And Box-Behnken Design, Juan Venegas Mendez

Open Access Theses & Dissertations

We are living in an industrialized world that relies on fossil fuels. The ways, in which these fossil fuels have damaged the earth, in special the environment is worth of special attention and corrective actions. In our days, the climate change (global warming) it is becoming the number one topic. These changes are affecting our health, comfort and our way of living. Solar systems have been working among us since several years, but the truth is that most of us really don't understand how they work and more important, how they work in time in different conditions. Solar panels are …

Locating And Protecting Facilities Subject To Random Disruptions And Attacks, Hugh Medal

Graduate Theses and Dissertations

Recent events such as the 2011 Tohoku earthquake and tsunami in Japan have revealed the vulnerability of networks such as supply chains to disruptive events. In particular, it has become apparent that the failure of a few elements of an infrastructure system can cause a system-wide disruption. Thus, it is important to learn more about which elements of infrastructure systems are most critical and how to protect an infrastructure system from the effects of a disruption. This dissertation seeks to enhance the understanding of how to design and protect networked infrastructure systems from disruptions by developing new mathematical models and …

A Framework For Personalized Dynamic Cross-Selling In E-Commerce Retailing, Arun K. Timalsina

Wayne State University Dissertations

Cross-selling and product bundling are prevalent strategies in the retail sector. Instead of static bundling offers, i.e. giving the same offer to everyone, personalized dynamic cross-selling generates targeted bundle offers and can help maximize revenues and profits. In resolving the two basic problems of dynamic cross-selling, which involves selecting the right complementary products and optimizing the discount, the issue of computational complexity becomes central as the customer base and length of the product list grows. Traditional recommender systems are built upon simple collaborative filtering techniques, which exploit the informational cues gained from users in the form of product ratings and …

Decision Rule Induction For Service Sector Using Data Mining- A Rough Set Theory Approach, Zhonghua Hu

Open Access Theses & Dissertations

Nowadays, data mining is more widely used than ever before; not only by the academic area, but also in the industry and business area. Apart from execution of business processes, the creation of knowledge base and its utilization for the benefit of the organization is becoming a strategy tool to compete. Despite of having ever growing data bases, the problem is that the finance company fails to fully capitalize the true benefits which can be gained from this great wealth of information. The data mining technology instead of classic statistical analysis is developed to help the people to discover the …

Random Keys Genetic Algorithms Scheduling And Rescheduling Systems For Common Production Systems, Elkin Rodriguez-Velasquez

Engineering Management & Systems Engineering Theses & Dissertations

The majority of scheduling research deals with problems in specific production environments with specific objective functions. However, in many cases, more than one problem type and/or objective function exists, resulting in the need for a more generic and flexible system to generate schedules. Furthermore, most of the published scheduling research focuses on creating an optimal or near optimal initial schedule during the planning phase. However, after production processes start, circumstances like machine breakdowns, urgent jobs, and other unplanned events may render the schedule suboptimal, obsolete or even infeasible resulting in a "rescheduling" problem, which is typically also addressed for a …

Improving Compressed Air Energy Efficiency In Automotive Plants: Practical Examples And Implementation, Nasr Alkadi, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

The automotive industry is the largest industry in the United States in terms of the dollar value of production [1]. U.S. automakers face tremendous pressure from foreign competitors, which have an increasing manufacturing presence in this country. The Big Three North American Original Equipment Manufacturers (OEMs)-General Motors, Ford, and Chrysler-are reacting to declining sales figures and economic strain by working more efficiently and seeking out opportunities to reduce production costs without negatively affecting the production volume or the quality of the product. Successful, cost-effective investment and implementation of the energy efficiency technologies and practices meet the challenge of maintaining the …

Self Learning Strategies For Experimental Design And Response Surface Optimization, Adel Alaeddini

Wayne State University Dissertations

Most preset RSM designs offer ease of implementation and good performance over a wide range of process and design optimization applications. These designs often lack the ability to adapt the design based on the characteristics of application and experimental space so as to reduce the number of experiments necessary. Hence, they are not cost effective for applications where the cost of experimentation is high or when the experimentation resources are limited. In this dissertation, we present a number of self-learning strategies for optimization of different types of response surfaces for industrial experiments with noise, high experimentation cost, and requiring high …

Decision Aid Models For Resource Sharing Strategies During Global Influenza Pandemics, Alfredo Santana Reynoso

USF Tampa Graduate Theses and Dissertations

Pandemic influenza outbreaks have historically entailed significant societal and economic disruptions. Today, our quality of life is threatened by our inadequate preparedness for the imminent pandemic. The key challenges we are facing stem from a significant uncertainty in virus epidemiology, limited response resources, inadequate international collaboration, and the lack of appropriate science-based decision support tools. The existing literature falls short of comprehensive models for global pandemic spread and mitigation which incorporate the heterogeneity of the world regions and realistic travel networks. In addition, there exist virtually no studies which quantify the impact of resource sharing strategies among multiple countries. This …

Apparent Total Evaporative Resistance Values From Human Trials Over A Range Of Metabolic And Heat Stress Levels, Matthew David Dooris

USF Tampa Graduate Theses and Dissertations

Failure to maintain thermal equilibrium can cause uncontrollable increases in body core temperature beyond critical upper limits. In selecting clothing, consideration must be given to the heat transfer properties of clothing that may restrict the cooling capacity of the human body under heat stress conditions, most importantly, apparent total evaporative resistance (R_e,T,_a). This study calculated and compared R_e,T,_a for five clothing ensembles under varying heat stress conditions, including three relative humidity (RH) levels and three stages of heat stress to determine if R_e,T,_a values varied or remained the same with …

Analytical Methods To Support Risk Identification And Analysis In Healthcare Systems, Laila Nadime Cure Vellojin

USF Tampa Graduate Theses and Dissertations

Healthcare systems require continuous monitoring of risk to prevent adverse events. Risk analysis is a time consuming activity that depends on the background of analysts and available data. Patient safety data is often incomplete and biased. This research proposes systematic approaches to monitor risk in healthcare using available patient safety data. The methodologies combine traditional healthcare risk analysis methods with safety theory concepts, in an innovative manner, to allocate available evidence to potential risk sources throughout the system. We propose the use of data mining to analyze near-miss reports and guide the identification of risk sources. In addition, we propose …

The Impact Of Supply Chain And Network Structure On The Environmental Performance Of Sustainability-Focused Companies, Ozan Ozcan

USF Tampa Graduate Theses and Dissertations

The goal of this dissertation was to contribute to our understanding of the relationship between supply chain structure and the pursuit of a sustainability-driven corporate strategy. The literature indicates that in order to pursue a sustainability-focused strategy, an increased level of integration across the supply chain is required. However, there are also industry-level dynamics that impact observed levels of vertical integration. That is, some industries are naturally more integrated than others based on the maturity level of the industry. Thus, some firms may experience opposing forces regarding their sourcing strategies once they choose to pursue a sustainability-focused strategy.

To explore …

A Framework For Determining The Reliability Of Nanoscale Metallic Oxide Semiconductor (Mos) Devices, Wilkistar Otieno

USF Tampa Graduate Theses and Dissertations

An increase in worldwide investments during the past several decades has pro-pelled scienti c breakthroughs in nanoscience and technology research to new and exciting levels. To ensure that these discoveries lead to commercially viable prod-ucts, it is important to address some of the fundamental engineering and scientific challenges related to nanodevices. Due to the centrality of reliability to product integrity, nanoreliability requires critical analysis and understanding to ensure long-term sustainability of nanodevices and systems. In this study, we construct a relia-bility framework for nanoscale dielectric lms used in Metallic Oxide Semiconductor (MOS) devices. The successful fabrication and incorporation of metallic …

Design Of A New Suturing And Knot Tying Device For Laparoscopic Surgery, Sinan Onal

USF Tampa Graduate Theses and Dissertations

Minimally invasive or laparoscopic surgery has completely changed the focus of surgery becoming an alternative to various types of open surgery. Minimally invasive surgery avoids invasive open surgery as the operation is performed through one or more small incisions in the abdomen and using a small camera called laparoscope. Through these incisions, surgeons insert specialized surgical instruments to perform the operation resulting in less postoperative pain, shorter hospital stay, and faster recovery. However, the main problems during minimally-invasive surgery are the limited space for operating instruments and the reduced visibility and range of motion inside the patient’s body. During minimally-invasive …

Task Analysis, Modeling, And Automatic Identification Of Elemental Tasks In Robot-Assisted Laparoscopic Surgery, Lavie Pinchas Golenberg

Wayne State University Dissertations

Robotic microsurgery provides many advantages for surgical operations, including tremor filtration, an increase in dexterity, and smaller incisions. There is a growing need for a task analyses on robotic laparoscopic operations to understand better the tasks involved in robotic microsurgery cases. A few research groups have conducted task observations to help systems automatically identify surgeon skill based on task execution. Their gesture analyses, however, lacked depth and their class libraries were composed of ambiguous groupings of gestures that did not share contextual similarities.

A Hierarchical Task Analysis was performed on a four-throw suturing task using a robotic microsurgical platform. Three …

Observer-Dependent Model For Analyzing Subjective Parameters In Epidemiology, Milad Zarei

Open Access Theses & Dissertations

Although medical technologies for preventing the contagion and spread of infectious diseases have improved steadily throughout the last century, new infectious diseases are still emerging and spreading swiftly. The modeling of infectious disease spread is crucial in addressing the lack of predictive ability in epidemiology. Managing the spread of infectious diseases requires processing quantitative epidemiological data and the ability to capture the dynamics of the infectious disease in order to provide a measure of control.

In this thesis, I have introducing cognitive biases in diseases spread modeling. For the first time, to the author's knowledge, the human subjective experience has …

Renewable Energy Integration: An Approach For Micro-Grid Optimization., Nicolas Lopez

Open Access Theses & Dissertations

This thesis explores the Renewable Energy Integration Problem beginning with a literature review on the different sources of electrical energy classified as Non-Renewable and Renewable, stating that the integration of renewable sources within the pre-existing Power-Grids is a current worldwide problem that is being addressed with different approaches.

The impossibility to exactly model the different equations relating the electric output of the renewable energy sources as they relate with meteorological factors, makes the renewable sector a stochastic component of the overall mathematical model, where it can be concluded that most of the problem is in the area of the forecast. …

Heat Stress Evaluation Of Protective Clothing Ensembles, Amanda Lee Pease

USF Tampa Graduate Theses and Dissertations

Clothing directly affects the level of heat stress exposure. Useful measures to express the thermal characteristics are WBGT (wet bulb globe temperature) clothing adjustment factor (CAF) or apparent total evaporative resistance (R_e,T,_a). The CAF is assigned through laboratory wear trials following a heat stress protocol in which the air temperature and humidity are progressively increased until the participant clearly loses the ability to maintain thermal equilibrium. The critical condition is the point of thermal transition and from these conditions both the CAF and Re,T,a are computed. The first objective of this study is to compare the …

A Study Of Decision Analysis Methods In Aerospace Technology Assessments, Sharon Monica Jones

Engineering Management & Systems Engineering Theses & Dissertations

Managers of aerospace technology programs and projects are faced with the challenge of making technology portfolio decisions under conditions of limited data, rapidly changing macro level factors and organizational uncertainties. To help make these technology investment decisions, some aerospace managers and analysts have used techniques from the field of decision analysis. In addition, there have been a limited number of research studies of real decision problems.

This dissertation presents the results of a non-experimental examination of the use of decision analysis methods for the assessment of aerospace technology portfolios. A web-based survey instrument was developed based on the results of …

The Impact Of Communication Medium On Team Performance Patterns, Pilar Pazos, Mario G. Beruvides

Engineering Management & Systems Engineering Faculty Publications

The increased impact of globalization and rapidly changing technologies are some of the biggest challenges facing 21st century organizations. Remote teams supported through computer-based systems have been identified as a key lever to help organizations adapt to this turbulent environment. This study sheds some light on how teams perform and adapt by evaluating performance and synergy over time for teams in two different settings: computer supported and face-to-face. Participants in the study were randomly assigned either to a computer-supported or a face-to face group. Each group met over three sessions to perform a series of tasks that were evaluated using …

Using The Taguchi Design And The Central Composite Design To Increase The Robustness Of A Process From Its Raw Material Variability, Alvaro Cuevas

Open Access Theses & Dissertations

This research presents an experimental study where four controllable and one noise factor are analyzed using the Taguchi approach and the Central Composite Design (CCD) in order to induce robustness in a process that is being designed to treat residual grease from small restaurants. Three response variables are analyzed separately to establish the parameters conditions to obtain the most robust process output. These suggested conditions are validated conducting confirmation runs that are compared statistically to the predictions from the Taguchi prediction model for the Taguchi approach, and the Response optimizer for the CCD. The accuracy of each method is measured …

Multi-Objective Network Reliability Optimization Using Evolutionary Algorithms, Franciso Oswaldo Aguirre

Open Access Theses & Dissertations

This work presents a new multiple objective evolutionary algorithm to solve three well known network reliability allocation problems considering different conflicting objectives to be optimized simultaneously. The new algorithm is applied in the design of a telecommunication network that is formed for several stations or nodes interconnected by telecommunication links or paths. The problem presented in this work involves finding which links to activate in order to obtain connectivity in the nodes. The number of nodes that need to be connected depends of the case that is being evaluated. The three network reliability problems considered are: all-terminal, k-terminal, and two-terminal. …

Design And Development Of A Prototype For A Web-Based Interface For Online Material For Tanzanian Youth, Mjema A.M

Tanzania Journal of Engineering and Technology (TJET)

A prototype of a web-based interface for an online database was developed to be used by youth organizations in Dar-es-Salaam. A participatory approach involving secondary students in the identification of user interface requirements, in designing and testing the prototype was used. A questionnaire was designed and manned in seven secondary schools in Dar-es-Salaam to estimate the Internet usage. Interviews were conducted to countercheck the questionnaire responses. The interview and the questionnaire helped to come up with a set of user requirements for the web-based interface of an online information search. From the specifications of the user requirements the author was …

Analytical Modeling Of A Large Local Area Network - Part I: Internet Traffic Characterization, Mathew Luhanga

Tanzania Journal of Engineering and Technology (TJET)

The goal of both IP network operators and the end users is to get the highest performance from the system for a given cost. This makes Performance a key criterion in the design, procurement, and use of computer and communication systems. In order to address problems associated with performance degradation of operational communications systems, over the last decade, traffic engineering techniques have emerged in an attempt to optimize communication systems’ performance and ensure more efficient use of their resources. One of these techniques is analytical modeling. Analytic performance models are an excellent tool for quickly evaluating the performance of operational …

Identification Of Unbalanced Forces And Foundation Parameters Of Rotating Machines From Vibration Measurements, Nalitolela G

Tanzania Journal of Engineering and Technology (TJET)

A technique is described to use measured vibration data of a rotating machine and its foundation to identify unbalanced forces, stiffness and damping parameters of the mountings, and the parameters of the foundation. It is based on an idealisation treating the rotor, the machine structure and the foundation as rigid masses supported by springs and dampers. Operational vibration data of the machine and its foundation before and after the rotating unbalanced forces are perturbed by adding unbalanced mass to the rotor are used in the identification procedure. Once the parameters are identified, dynamic forces transmitted to the foundation can be …