Industrial Engineering Commons^™

Modeling Of A Spray Assisted Natural Draft Cooling Tower, Kaunde K

Tanzania Journal of Engineering and Technology (TJET)

Cooling towers are one of the largest heat and mass transfer devices that are in common use. A novel type of cooling tower has been proposed in which air flow rate into the tower is drawn by ejector action of sprays instead of fans as is done in conventional mechanical forced or induced draft cooling towers. This novel design offers the potential of saving the energy cost for driving the fan. The paper presents mathematical models for momentum transfer which is the driving force causing the entrainment of air. Also the heat transfer model for co-current flow of liquid and …

Multi-Phase Flow Analysis In Oil And Gas Engineering Systems And Its Modelling, Orlando F. Ayala, Luis F. Ayala, Orlando M. Ayala

Engineering Technology Faculty Publications

[Introduction] Two-phase flow is very common in industrial processes and its applications were already in use in ages as remote as the era of Archimedes. At the present time, many industrial processes rely on multi-phase phenomena for the transport of energy and mass or for material processing. During the last century, the nuclear, chemical and petroleum industries propelled intense research activity in the area. Their efforts have been aimed at the demystification of the mechanisms taking place during this complex flow situation.

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Knowledge Representation, Organization, And Formalization For Simulation Modeling Of Discrete Manufacturing System, Jung Hung Ma

All-Inclusive List of Electronic Theses and Dissertations

Simulation is an useful tool that helps managers making decision by designing models for real systems. It helps companies to study behaviors of real systems hy analyzing computer models and improve the systems based on the experiments' results. However, cross-domain knowledge requirement and lack of tools facilitate modeling are the main reasons that make industries hesitate to use simulation to assist making decision. This research is an attempt to develop robust knowledge representations for discrete manufacturing system and conceptual simulation model. A modeling methodology was proposed to utilize these knowledge representations (KRs) for developing conceptual simulation models from application domain …

Study Of The Impact Of Quality Costs On Profitability: The Case Of Small And Medium Industries In Tanazania, B Kundi

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Usefulness Of Technology Life Cycle In Tanzania: The Case Of The Ipl Developed Technologies, Abdallah Chungu

Tanzania Journal of Engineering and Technology (TJET)

This study sought to identify the adoption rate of technologv innovations developed by the Institute Of Production Innovation (IPI) at the University Of Dar-es-Salaam since 1984 to 1997 using a sigmoid shaped curve (S-shaped curves) to predict the life cycles of the respective technologies. Depending on the stimuli imparted to the specific technology, some of such technologies for instance, cinva ram and block making machines with hollow/spacer/louver exhibited longer life period as indicated by a series Of infer-connected S-curves. Other technologies including but nor limited to sunflower oil processing kit-winnowers, scorcher with one stove, seed roller, standard wheelbarrow, and manual …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Derivation And Analysis Of Maximum And Conditional Work Of An Electromagnet In Relays With Small Gaps And Constant Armature Load, Dominic Chambega

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Load Flow Solution For Three-Phase Mv Radial Distribution Connected Network Supplying Different Line Topologies, B. J. Kundy

Tanzania Journal of Engineering and Technology (TJET)

In this paper, a load flow solution for the Medium Voltage (MV) three-phase radial distribution in delta-delta (Δ–Δ) connected network supplying different line topologies such as three phase, phase to phase and single-wire earth return (SWER) networks is presented. The general voltage related network equations are developed using Kirchhoff’s voltage and current laws. Development of a solution to the load flow analysis applying the developed general voltage related network equations is proposed in order to evaluate the network voltage profile. Various numbers of arrays are developed for the identification of the network under study. The proposed method is a new …

The Need For Pfc Abatement In Semiconductor Manufacturing, Mohsen Manesh, Brian Kendrick

Inquiry: The University of Arkansas Undergraduate Research Journal

Perfluorocompounds (PFCs) are highly stable chemical compounds used in two integral steps of semiconductor manufacturing: chemical vapor deposition (CVD) chambers and etch chambers. Unfortunately, PFCs are also greenhouse gases linked to global warming. This, combined with their long atmospheric lifetimes gives them global warming potentials much higher than C02 the principal greenhouse gas. In a series of voluntary agreements with the United States and other national governments, the worldwide semiconductor industry has set a goal of reducing PFC emissions to 90% of their 1995 levels. To reach this goal, researchers have explored four main methods of reduction: substitution of PFCs, …

A Study Into Lack Of Product Innovation And Business Techniques At The Tricycle Workshop And Rrs Lessons To Small Companies, E Elias

Tanzania Journal of Engineering and Technology (TJET)

A study was carried out at the Tricycle Workshop (TW) which was facing the problem of !ack of orders and therefore stagnation Of business. The objective of the study was to find out reasons for this situation and to propose possible remedial solutions. The study was conducted using the principles of the Product Innovation process where internal and external issues related to the business Of the company were investigated for information. Analysis Of information obtained indicated that the bad situation of the TW had mainly been caused by the nature of the tricycles-supply system whereby users (disabled persons) are unable …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Trends Of Microcomputer Technology In Developing Countries, With More Focus On Tanzanian Experiences: Achievements And Problems, Satoki Mahenge

Tanzania Journal of Engineering and Technology (TJET)

Trends of microcomputer technology in developing countries, including Tanzanian. is like a 'mixed bag' of achievement and problems. Although rhe technology has been available for many years in developed world, developing countries are responding to it differently due to differences in political and economic policies. Some countries have acrimonious policies on the technology, some not. There are countries which utilize fully the technology in work places and others are still at dilemma on the importation of the technology due to what is 'claimed to be a weak economy in the presence Of many other pressing needs'. Other countries seem to …

An Investigation Into Manufacturing Execution Systems, K. W. Duley

Theses : Honours

Hardware and software developments of this decade have exposed an hiatus between business/management applications and process control in heavy industry in the implementation of computer technology. This document examines the development of discrete manufacturing and of relevant implementations of computing. It seeks to examine and to clarify the issues involved in a perceived current drive to bridge this gap, to integrate all the systems in a manufacturing enterprise in a Manufacturing Execution System (MES) in order to address two hypotheses: I) That overseas trends towards the development of manufacturing execution systems have application in the Australian industrial context. 2) That …

Evaluation Of The Influence Of The Magnetic System In Relays, D Chambega

Tanzania Journal of Engineering and Technology (TJET)

The paper evaluates the influence of different cores on the performance of relays. In particular two types ofc-cores, all made from IOW quality mag- netic steel, are considered. The two cores, one butt-constructed and the other interleaved, are mathematically modelled and the tesults are analyzed and obtained experimentally. Then the two sets of results are compared with those ofa c-shaped core of excellent magnetic material with the aim of qualifying the influence of the core material. It is observed that the method of constructing the core also influences the performance.

Power Shedding Experiences And Lessons In A Township, Alexander Kyaruzi

Tanzania Journal of Engineering and Technology (TJET)

This paper presents how power shedding by taking out one of the trans- former high voltage fuses causes phase imbalance. And for the same elec- nicc,l energy output generator fuel consuntption with unbalanced phases is 12.5% of The fuel consunwtion with balanced phases. Furthermore it is shown thal energy efficient lighting by use of energy efficient bulbs can reduce load shedding.

Dual Versus Single Spark Plug: A Critique, I Mshoro

Tanzania Journal of Engineering and Technology (TJET)

Dual spark plugs are occasionally employed on certain modern Spark lg- nited (S') engines, viz lean burn engines. Their benefit has generally been noticed in the operating conditions whenfuel-air mixture is very lean, or when a larger proportion of EGR has been employed, or during the part load conditions and so on. An extensive literature survey has indi- cared an interesting spectrum of reasons for gains due to the dual spark plug. A consistent explanation is found to be missing which can describe the behaviour of the engines with single versus dual spark plugs There are quite "few researchers who …

Suitability Of The Present Strategic Information Technology Planning (Sitp) Methodologies To The Developing Countries, A Victor

Tanzania Journal of Engineering and Technology (TJET)

The needfor strategy formulation, or in general terms strategic planning, for IT is considered as one of the most important aspects of IT manage- ment. To this end, there are a number of IT strategy formulation method- ologies world-wide. These methodologies were developed over a span of time, starting from mid 1960's when IT use started to become a serious issue in the developed countries, and continued with the trends in IT de- velopment and use, as was applicable in those countries. Morc recent of the methodologies were developed through improvements on earlier ones, and based on the new challenges …

A Check Parameter Method For Use In Designing Relays, H Kadete

Tanzania Journal of Engineering and Technology (TJET)

Low quality magnetic steel available locally has been successfully used as core material for a relay. New design principles as well as construction procedure used in development of a prototype are presented. Then the new approach is assessed and found to deliver acceptable accuracy.

Antecedents, Moderators And Outcomes Of Organizational Commitment, Beatus Kundi

Tanzania Journal of Engineering and Technology (TJET)

This study examined: (I) the impact of the BtruCturaI of tenure, job integration and organizational support on organizational (2) the mediating roles of the cultural values for performance and collectivity, and the intra—individual factorg of organizational identification and the norm of reciprocity Ln the relationahip between the structural factore and organization coamitment; and, (3) the relationghip between organizational cormitment and the ouecome variablen Of abøeneeeigm, turnover and The Bhow that job and Of the for performance a gignificant facilitator of the effecte Of the etructuraL factors on commitment; and organization identification and the norm of rec are important linkø in …

Factors Affecting Capacity Utilization In Industries: Hierarchical Analysis, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper provides a hierarchical analysis of the factors affecting capacity utilization in Tanzanian industries. Several factors were identified and sent to randomly selected industries in Tanzania for ranking. The collected data was summarized and analyzed. The analysis made use of a known procedure, the 'Analytical Hierarchy Process' (AHP). The final results shows a ranking of the factors, on various hierarchical levels as to their percentage contribution in lowering the capacity utilization.

Electric Power Transmission & Purchases : Report Of A Study By The Joint Standing Committee On Utilities, 112th Maine Legislature, Maine. Legislature. Joint Standing Committee On Utilities

Maine Collection

Electric Power Transmission & Purchases : Report Of a Study By the Joint Standing Committee on Utilities, 112th Maine Legislature

Maine Legislature. Joint Standing Committee on Utilities.

Augusta, Maine (December 2, 1986).

Contents: Introduction / Issues & Recommendations / Review of 1986 Legislation / Maine's Electric Power Picture / Technical Analysis of Transmission & Wheeling / Economic Implications of Transmission & Wheeling /. Legals Analysis of Transmission & Wheeling / Proposed Legislation / Appendices / Tables & Figures

Engineer Education: Disciplinary Preferences In The Faculty Of Engineering University Of Dar Es Salaam, S Mosha

Tanzania Journal of Engineering and Technology (TJET)

Most practising engineers can hardly recall the days they had to make up their minds on whether engineering was their chosen career. This decision may have been approached with ignorance and very high expectations. Later after registering in a Faculty of Engineering the freshman was given a chance to choose a department; sometimes this had already been done for him by his sponsors so all he had to do was to walk into the preselected department.

A generation later, University entrants are faced with a similar predicament. This paper high-lights the procedures involved and proceeds to recommend the necessary fundamental …

Photo And Magnetic Gated Bi-Directional Counter, Charles Burdette Kraemer

Graduate Research Papers

The purpose of this study is to investigate digital counter circuitry, digital logic, and some special applications of digital display systems. The technical data and information ascertained from the research will be used to design and develop a four-digital counter with photo and magnetic gated inputs.

An Evaluation Of Demonstrations On Inductor Theory, Boyd Warner Wasson

Dissertations and Theses @ UNI

The writer sought an improved approach for teaching theory of electronics to high school students. This approach was intended to require less expense and time needed to provide classroom instruction on electrical theory.

The purpose of this study were to:

(1) Prepare a number of demonstrations to illustrate phenomena associated with coils or inductors and their use in practical electronics.

(2) Prepare equipment and gather parts needed to perform demonstrations. Ease of construction and economy were important considerations.

(3) Evaluate the effectiveness of the demonstrations on student comprehension and the ability to apply information taught.