Industrial Engineering Commons^™

Process Automation And Robotics Engineering For Industrial Processing Systems, Drake Stimpson

USF Tampa Graduate Theses and Dissertations

Automation in industrial systems applications has emerged as the fundamental solution for improving quality, production rate, and efficiency of a process. Much of the recent popularity surrounding the transition of processes from manually operated tasks to automated systems can be attributed to the concept of Industry 4.0, which outlines the fundamental guidelines for integrating cyber-physical systems into industrial processes. Due to rapid advancement of technology in robotics and automation as well as the increase in accessibility of resources to this technology, the capability to develop automated systems has become feasible for small-scale enterprise. This work presents a two-part initiative to …

Structural Model Of The Technological Process Of Storage And Processing Of Oil Raw Materials, N.A Kabulov

Chemical Technology, Control and Management

The technological method of storing and processing oilseed raw materials is structurally modelled in the article. Additionally, it is suggested that the generalized structure be presented as a three-part scheme, consisting of a raw material department, a processing shop, and transportation networks. On the basis of a thorough examination of the characteristics of the constituent parts of the technological complex, a practical model for the problem of the general characteristics of the technological complex is proposed.

Factors Influencing Total Productive Maintenance Implementation For Thermal Generation Plants, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

This study accepts that the technical and administrative factors can amplify effective total productive maintenance (TPM) implementation at thermal generation plants. It is noted that there is a limited number of studies that have attempted to understand the subject of TPM implementation in the energy sector. Noting this shortcoming, the authors thought it crucial to generate empirical evidence on the factors influencing effective TPM implementation for thermal generation plants, with evidence from gas-fired plants. A sample of 88 respondents was selected and consulted. Data were collected through questionnaires and analyzed quantitatively by inferential statistics and qualitatively through thematic analysis using …

Performance Evaluation Of Udsm Network To Deliver Multimedia Elearning Contents: Case Of Coict, Mercy Mbise

Tanzania Journal of Engineering and Technology (TJET)

The use of technology in education in Sub-Saharan Africa has been reported to be hindered by many factors including inadequate Information and Communication Technology (ICT) infrastructure, low internet speed, and lack of skills to use educational technologies. This paper aim at evaluating how the available ICT infrastructure at the College of Information and Communication Technologies (CoICT) can support, with acceptable Quality of Service (QoS), the delivery of multimedia applications for eLearning services. The evaluation was performed over a network testbed implemented in a computer laboratory for wired and wireless connections. The testbed consisted of five personal computers (PCs) connected via …

The Rise Of Terrorism In Africa And What It Means For U.S. Policymakers, Bridget Mary Hughes

Master's Theses

This thesis utilizes three case studies to measure the rise of terrorism in Africa. This qualitative data leads the reader to one ultimate question: what does the rise in terrorism in Africa mean for the United States (U.S.) and U.S. policymakers, National Security academia, students in National Security, if anything at all? The answer is: if civilian and military compounds are being targeted by these violent extremists, as these three case studies demonstrate, it is my recommendation that U.S. policymakers cease sending troops to the African theater and, instead, allocate funding to the citizens and nonprofits of the countries whom …

Study Of Stochastic Market Clearing Problems In Power Systems With High Renewable Integration, Saumya Sakitha Sashrika Ariyarathne

Operations Research and Engineering Management Theses and Dissertations

Integrating large-scale renewable energy resources into the power grid poses several operational and economic problems due to their inherently stochastic nature. The lack of predictability of renewable outputs deteriorates the power grid’s reliability. The power system operators have recognized this need to account for uncertainty in making operational decisions and forming electricity pricing. In this regard, this dissertation studies three aspects that aid large-scale renewable integration into power systems. 1. We develop a nonparametric change point-based statistical model to generate scenarios that accurately capture the renewable generation stochastic processes; 2. We design new pricing mechanisms derived from alternative stochastic programming …

Viability Analysis Of Ubungo Ii Gas Power Plant Efficiency Improvement Using Co-Generation System, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

The power utility, Tanzania Electric Supply Company Limited (TANESCO) is faced with challenges of supplying adequate power to the ever-increasing demand. To this end, this paper explores the installed Ubungo Gas Power Plant (UGP II) located in Dar es Salaam to find means of utilizing it in co-generation method. The study embarked on detailed modelling of the system and run simulations which indicated that the co-generation can result to power generation efficiency increase between 10.42 to 50.92%. It is recommended to change the UGP II to exploit this co-generation method. Further, the study could be improved by including more parameters …

Assessment Of Energy Efficiency In Beverage Industry, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

The brewery industry has a significant contribution to the national income. However, it is also associated with energy intensive processes and pollution. In this work, the energy efficiency assessment of the largest brewery in Tanzania i.e., Tanzania Breweries Limited has been conducted. Energy consumption analysis was conducted according to IEEE SA 739 1995. Important parameters used to assess brewery energy efficiency were boiler efficiency and losses, equipment energy productivity as well as load factor. It was found that the main energy consumers are packaging (54.63%), brewing (29.30%) and utilities (15.17%). More importantly, it was found that about 68% of the …

A Model For Sustainable Adoption Of Solar Photovoltaic Technology In Tanzania, Joseph Kihedu

Tanzania Journal of Engineering and Technology (TJET)

The aim of the study was to develop a sustainable model for enhancement of the solar PV technology adoption in Tanzania. The model was developed based on the identified barriers that hinder the adoption of solar PV technology and adopted the best strategies from successful projects. Further, the drivers and activities were developed based on selected best strategies from successful projects. The identified barriers to the adoption of solar PV technology, which are grouped into five associated categories and their significances, are lack of access to finance (32%), non-enforcement of policy and regulation (31%), technical (18%), lack of awareness (9%) …

Chemical Clean Automated Loader, Jordyn Bryner

Williams Honors College, Honors Research Projects

TTM Technologies (TTM) is a global printed circuit board (PCB) manufacturer. The work described in this report was completed in the TTM North Jackson, Ohio location. This plant focuses primarily on the manufacturing of rigid and rigid-flex PCBs for the aerospace and defense industry. TTM North Jackson has an ongoing labor dependency issue due to the shortage of workers the nation is facing. To solve this problem, TTM has focused the efforts of their new engineers and interns on automating processes that are labor dependent. The goal is to provide design guidance to be used later by TTM to automate …

Virtual Analyzers For Increasing The Intelligence Of Industrial Process Control Systems, Umidjon Abdimajotovich Ruziev Phd, Marufjon Kobuljanovich Shodiev

Chemical Technology, Control and Management

It is shown that the development and implementation of virtual analyzers of the quality of the final industrial products is an effective tool for increasing the efficiency of industrial production. The methodology and stages of development of virtual analyzers for predicting the quality of products, monitoring non-measurable or difficult-to-measure parameters of continuous and periodic technological processes are considered, and issues of supporting and adapting a virtual analyzer during its operation without restructuring are also considered.

Development Of Metaheuristic Algorithms For The Efficient Allocation Of Power Flow Control Devices, Eduardo Jose Castillo Fatule

Open Access Theses & Dissertations

Modern energy grids have become extremely complex systems, requiring more variable and active flow control. As a remedy to this, Distributed Flexible AC Transmission Systems (D-FACTS) are cost-efficient devices used to mitigate power flow congestion and integrate renewable energies. The objective of this research is then to propose an efficient multiple objective evolutionary algorithm to solve a stochastic model for D-FACTS allocation, which aims to optimize various objectives related to cost, grid health, and environmental impacts. The model was implemented on a modified RTS-96 test system, and the results show that optimally allocating D-FACTS modules using the proposed model can …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

Assessment Of The Impacts Of Climate Variability On Hydropower Generation: A Case Study Of The New Pangani Falls, Tanzania, Dativa Byarufu

Tanzania Journal of Engineering and Technology (TJET)

Climate change poses potential impacts on hydropower generation either positively by increasing or negatively by decreasing river flow. This study assessed the impacts of climate variability on hydropower with a focus on the New Pangani Falls in Tanzania. Rainfall and temperature time series data from 1980-2014 were analyzed in relation to river discharge and associated impacts to hydropower generation. The Man-Kendall test was used to detect trend in both annual and seasonal time series. The results showed a negative trend in annual rainfall with Z= -2.41 at α = 0.05 and the slope Q = -0.964. Seasonal trend analysis showed …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Efficiently Estimating Survival Signature And Two-Terminal Reliability Of Heterogeneous Networks Through Multi-Objective Optimization, Daniel Bruno Lopes Da Silva

Graduate Theses and Dissertations

The two-terminal reliability problem is a classical reliability problem with applications in wired and wireless communication networks, electronic circuit design, computer networks, and electrical power distribution, among other systems. However, the two-terminal reliability problem is among the hardest combinatorial problems and is intractable for large, complex networks. Several exact methods to solve the two-terminal reliability problem have been proposed since the 1960s, but they have exponential time complexity in general. Hence, practical studies involving large network-type systems resort to approximation methods to estimate the system's reliability. One attractive approach for quantifying the reliability of complex systems is to use signatures, …

Bibliometric Review Of Predictive Maintenance Using Vibration Analysis, Aashna Midha Ms., Ishita Maheshwari Ms., Kaushik Ojha Mr., Kritika Gupta Ms., Shripad V. Deshpande Mr.

Library Philosophy and Practice (e-journal)

Every day the world is depending more and more on machines in almost every aspect of life. With the increasing use of machines, there also needs to be an evolution in the maintenance of these machines. Predictive maintenance is a process used to monitor the equipment and machinery during its operation to detect any damages and/or deteriorations and enable the required maintenance plan in advance, resulting in reduced operational costs and full utilization of tools and parts. The fundamental goal of this bibliometric review paper is a comprehension of the extent and sources of the literature available for predictive maintenance …

In-Situ Process Monitoring For Metal Additive Manufacturing (Am) Through Acoustic Technique, Md Shahjahan Hossain

College of Graduate Studies: Theses & Dissertations

Additive Manufacturing (AM) is currently a widely used technology in different industries such as aerospace, medical, and consumer products. Previously it was mainly used for prototyping of the products, but now it is equally valuable for commercial product manufacturing. More profound understanding is still needed to track and identify defects during the AM process to ensure higher quality products with less material waste. Nondestructive testing becomes an essential form of testing for AM parts, where AE is one of the most used methods for in situ process monitoring. The Acoustic Emission (AE) approach has gained a reputation in nondestructive testing …

Ensuring A Safety Workplace By The Automation Of The Ammonia Cooling System, Luis Felipe Cordoba

International Programs

Ammonia presents high efficiency in freezing food products for preserving them for exportation; however, the use of this refrigerant implies a high risk to human life because it presents high concentrations of toxic gases that can produce deadly consequences to human beings. Smart relays present a flexible manner to automate industrial process; therefore, this poster aims to replace the manual and inefficient manner of controlling ammonia cooling system by using a smart relay that can control the levels of this refrigerant in the precooler and cooler section; resulting in considerable decrease workers’ in exposure to this refrigerant.

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Factors Affecting The Performance Of Photo-Voltaic Solar Energy Storage, Vasanth Bhat

Electronic Theses and Dissertations, 2020-2023

One of the most important factors in a nation's development is energy availability. All the aspects of its economy are directly proportional to the energy resources. Oil is one of the most sought energy resources currently. Solar energy is one of the most important renewable sources of energy available to us. With oil deposits depleting and current global warming, there is an emphasis on using more and more renewable sources or clean energy. This has led to immense research on solar cells and how it could better be used to get maximum output. Storage of energy is another aspect that …

Mathematical Modeling, Optimal Control And Stability Analysis For Dynamic Supply Chains, Yasser Alberto Davizon

Open Access Theses & Dissertations

Dynamic supply chains (SC) are important to reduce inventory, to enable the flow of materials, and maximize profits. By this, dynamic SC require proper decision-making with effective performance and synchronization. In operations and production planning processes, decision-makers develop convenient and suitable decisions, to validate their hypoThesis about which decisions incorporate more profit while reducing costs on enterprise operations. Based on this, inventory management plays a crucial point in the supply chain analysis. In general, SC processes raw material, cash, and information flows, taking into account the demand profile of the system. This research work presents the mathematical modeling, optimal control, …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Economic Model Predictive Control And Process Equipment: Control-Induced Thermal Stress In A Pipe, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Recent work on economic model predictive control (EMPC) has indicated that some processes may be operated in a more economically-optimal fashion under a time-varying operating policy than under a steady-state operating policy. However, a concern for time-varying operation is how such a change in operating policy might impact the equipment within which the processes being controlled are carried out. While under steady-state operation, the operating conditions to which equipment would regularly be exposed can be estimated, this would be more difficult to assess thoroughly a priori under time-varying operation. It could be explored whether the EMPC could be made aware …

Research Methodology Adopted In Developing Tansse-L System, Ellen Kalinga

Tanzania Journal of Engineering and Technology (TJET)

Research methodology is among the very important part in a research work. It is the heart which describe the activities necessary for the completion of the research work. Research methodology provides a plan of investigation considered to obtain answers to research problems and it depends on the context of application. This paper presents the research methodology adopted when developing Tanzania Secondary Schools e-Learning (TanSSe-L) system, a learning management system (LMS) which was successfully developed through customization of Moodle open source LMS. TanSSe-L system is a context centered platform for secondary schools in Tanzania. TanSSe-L system was developed using a number …

Linking Quality Management Practices With Performance Of Manufacturing Industries In Tanzania, Mussa Iddi Mgwatu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Local products of manufacturing industries in Tanzania are subjected to intense competition in the markets. Product quality is one of key factors that play a considerable role for manufacturing industries to win the competitive advantage. This paper attempts to analyse the extents of quality management practices (QMP) and manufacturing performance (MP) as well as to examine the linkage between practices and performance. Data was collected from seventy-eight (78) manufacturing industries in Dar es Salaam region using questionnaires comprising of both single-item and multi-item questions. Descriptive statistics was used to quantify the extent of quality management practices and manufacturing performance (MP) …

(Poster) Internal Restoration And Modernization Of A 1948 Wwii Era Jukebox, Miles Furr, Cristiana Olarinre, Joel Carpenter, Elijah Knox, George Ricco, Paul Talaga, Suranga Dharmarathne

ASEE IL-IN Section Conference

Using Six Sigma guidelines under the sponsorship of The University of Indianapolis in cooperation with the client, Brugh Industrial Engineering, this project is to modernize the functionality and interface of a Rockola Model 1428 Jukebox while maintaining its vintage appeal. The process of modernization includes meeting today's industrial safety standards, incorporating ethernet protocol, and utilizing a programmable logic controller, PLC. The jukebox is a showcase of current automation technology. Lighting has been upgraded from fluorescent and incandescent bulbs to addressable nano pixel LEDs. The amplifier, coin system, and record selection system were revitalized to OEM operation standards. All switches within …

On Accounting For Equipment-Control Interactions In Economic Model Predictive Control Via Process State Constraints, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Traditionally, chemical processes have been operated at steady-state; however, recent work on economic model predictive control (EMPC) has indicated that some processes may be operated in a more economically-optimal fashion under a time-varying operating policy. It is unclear how time-varying operating policies may impact process equipment, which must be investigated for safety and profit reasons. It has traditionally been considered that constraints on process states can be added to EMPC design to prevent the controller from computing control actions which create problematic operating conditions for process equipment. However, no rigorous investigation has yet been performed to analyze whether, when a …

Weld Penetration Identification Based On Convolutional Neural Network, Chao Li

Theses and Dissertations--Electrical and Computer Engineering

Weld joint penetration determination is the key factor in welding process control area. Not only has it directly affected the weld joint mechanical properties, like fatigue for example. It also requires much of human intelligence, which either complex modeling or rich of welding experience. Therefore, weld penetration status identification has become the obstacle for intelligent welding system. In this dissertation, an innovative method has been proposed to detect the weld joint penetration status using machine-learning algorithms.

A GTAW welding system is firstly built. Project a dot-structured laser pattern onto the weld pool surface during welding process, the reflected laser pattern …

Energy Efficiency Evaluation Of Blower Heater Non-Purge Compressed Air Dryers, Alexandra M. Botts

Graduate Theses, Dissertations, and Problem Reports (ETD)

There are several compressed air dryers available for industrial use including, refrigerant, desiccant, and membrane. This research focuses on twin tower regenerative closed loop desiccant dryers, specifically: blower heater non-purge (BHNP) with and without cooling water pumps, Compressed-air Heater Purge (CHP), Blower Heater Purge (BHP), and Pressure Swing Heaterless (PSH). These styles of dryers are used mainly in industries that require extremely dry air such as, food manufacturing, medical air, or sensitive technology manufacturers. The research was conducted by collecting and analyzing real time current draw data on air compressors and associated dryers at eight different facilities (13 compressor systems) …