Industrial Engineering Commons^™

Technical Project Management: Union Of Systems Engineering Processes With Project Management Processes, Deyaaldeen M. Abusal

Open Access Theses & Dissertations

Today, most projects in technical fields utilize project management to complete projects as planned, and some of the projects utilize system engineering to cover the project in both technically and commercially. This Thesis investigates the relationship between Project Management (PM) and Systems Engineering (SE) to determine if a suitably professional level of management and level of quality can be achieved. When studying PM and SE separately and make a comparison between both, there is much overlap between these two mature fields. The project could be planned and completed solely by either process. This study combines both fields of Project Management …

Systematic Review For Water Network Failure Models And Cases, Yufei Gao

Graduate Theses and Dissertations

As estimated in the American Society of Civil Engineers 2017 report, in the United States, there are approximately 240,000 water main pipe breaks each year. To help estimate pipe breaks and maintenance frequency, a number of physically-based and statistically-based water main failure prediction models have been developed in the last 30 years. Precious review papers focused more on the evolution of failure models rather than modeling results. However, the modeling results of different models applied in case studies are worth reviewing as well.

In this review, we focus on research papers after Year 2008 and collect latest cases without repetition. …

Methodologies For Solving Integrated Transportation And Scheduling Problems, Fereydoun Adbesh

Graduate Theses and Dissertations

This research proposes novel solution techniques to optimize two real-world problems in the area of scheduling and transportation. We first consider a model for optimizing the operations of dredges. In this problem, scheduling and assignment decisions are integrated across a finite planning horizon. Additional constraints and problem elements explicitly considered include, but are not limited, to environmental work window restrictions, budget limitations, dredge operation rates and schedule-dependent dredge availability. Our approach makes use of Constraint Programming (CP) to obtain quality and robust solutions within an amount of time small enough to be useful to practitioners. The expanded feature set of …

Essays In Measuring, Controlling, And Coordinating Supply Chain Inventory And Transportation Operations, Payam Parsa

Graduate Theses and Dissertations

Supply chain collaboration programs, such as continuous replenishment program (CRP), is among the most popular supply chain management practices. CRP is an arrangement between two partners in a supply chain to share information on a regular basis for lowering logistics costs while maintaining or increasing service levels. CRP shifts the replenishment responsibility to the upstream partner to avoid the bullwhip effect across the supply chain. This dissertation aims to quantify, measure, and expand the benefits of CRP for the purpose of reducing logistics cost and improving customer service. The developed models in this dissertation are all applied in different case …

Decision Support System For Container Port Selection Using Multiple-Objective Decision Analysis, Rivelino De Icaza

Graduate Theses and Dissertations

Ports are essential for maritime transportation and global supply chains since they are nodes that connect the sea- and land-based modes of transportation. With containerization and supply chains stimulating global trade, ports are challenged to adjust to changes in the market to create value to their customers. Therefore, this dissertation research focuses on the container port selection decision analysis to provide information to help shipping lines select the best port for their shipping networks. Since the problem is complex, dynamic, and involves multiple and conflicting criteria, the research proposes to use the multi-objective decision analysis with Value-Focused Thinking approach. The …

A Quantitative Model For Truck Parking Utilization With Hours Of Service Regulations, Alexis Christine Gaddy

Industrial Engineering Undergraduate Honors Theses

Continual growth in traffic volume on U.S. Highways and insufficient parking for commercial trucking vehicles has led to significant safety concerns for truck drivers. Hours of Service (HOS) regulations dictate driving and rest periods of truck drivers. When a truck driver must stop as designated by the HOS regulations and the nearest parking location is at capacity, the trucker must either continue driving past the HOS limit or park in an undesignated and possibly illegal or unsafe spot such as an off-ramp. The combination of these two variables play an important role in the safety of truck drivers on a …

Identifying Key Factors Of Rail Transit Service Quality: An Empirical Analysis For Istanbul, Erkan Isikli, Nezir Aydin, Erkan Celik, Alev Taskin Gumus

Journal of Public Transportation

Providing a high quality of service in public transportation is essential to reduce dissatisfactions stemming from traffic congestion and noise. Public transport providers need to find ways to dilute the effects of immoderate use of private cars in big cities while maintaining a sufficient level of customer satisfaction. This study aimed to identify the key service quality (SQ) factors that drive passenger satisfaction in Istanbul’s rail transit (RT) system using data obtained from an extensive survey conducted by the Istanbul Public Transportation Co. A total of 11,116 passengers who used rail transport from May 15–June 3, 2012, and June 17–July …

Impact Of Rfid Information-Sharing Coordination Over A Supply Chain With Reverse Logistics, Juan Jose Nativi Nicolau

Open Access Dissertations

Companies have adopted environmental practices such as reverse logistics over the past few decades. However, studies show that aligning partners inside the green supply chain can be a substantial problem. This lack of coordination can increase overall supply chain cost. Information technology such as Radio Frequency Identification (RFID) has the potential to enable decentralized supply chain coordinate their information. Even though there are research that address RFID on traditional supply chain, few researches address how to coordinate RFID information sharing in a green supply chain. We study, through simulation experiments, two types of RFID information-sharing coordination under different configurations related …

Safety Performance Prediction Of Large-Truck Drivers In The Transportation Industry, Emily Moneka Francis Xavier

Graduate Theses and Dissertations

The trucking industry and truck drivers play a key role in the United States commercial transportation sector. Accidents involving large trucks is one such big event that can cause huge problems to the driver, company, customer and other road users causing property damage and loss of life. The objective of this research is to concentrate on an individual transportation company and use their historical data to build models based on statistical and machine learning methods to predict accidents. The focus is to build models that has high accuracy and correctly predicts an accident. Logistic regression and penalized logistic regression models …

Environmental Efficiency Assessment Of U.S. Transport Sector: A Slack-Based Data Envelopment Analysis Approach, Yong Shin Park, Siew Hoon Lim, Gokhan Egilmez, Joseph Szmerekovsky

Mechanical and Industrial Engineering Faculty Publications

Sustainable transportation in the U.S. is essential for long-term economic growth and mobility, and environmental preservation. Using a non-radial slack-based measurement data envelopment analysis (SBM-DEA) model and state-level data, this study assesses the environmental efficiency of the transportation sector in the U.S. from years 2004 to 2012. In addition to environmental efficiency, carbon efficiency and potential carbon reduction were estimated for the 50 U.S. states. The findings of this study reveal that U.S. transportation sector was environmentally inefficient; U.S. states had an average transportation environmental efficiency score below 0.64. Therefore the states could substantially reduce carbon emissions to improve the …

Value Focused Inland Waterway Infrastructure Investment Decisions, Othman Boudhoum

Graduate Theses and Dissertations

Maritime transportation functions as the backbone of world trade. The U.S. inland waterway transportation system is comprised of 12,000 miles of navigable waterways that connect and move freight between the global supply chain and thirty eight States. When investing in inland waterway infrastructure, we should aim to maximize all benefits associated with the investment including flood protection, water supply, hydropower generation, recreation, and environmental impact benefits. We formulate an initial qualitative value model for the inland waterway infrastructure investment decision based on a value-focused thinking approach which allows us to holistically evaluate project investment alternatives. Given limited resources, a portfolio …

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

College of Graduate Studies: Theses & Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …

Assessment Of Quality Stability Of Composite Flours Produced By Dar Es Salaam Smes, Leonard Rweyemamu

Tanzania Journal of Engineering and Technology (TJET)

A study was conducted to assess quality stability of cereal flours processed by food processing SMEs in Dar es Salaam. This product is obtained by mixing various cereal grains and is considered as of higher nutritional values in Tanzania. The shelf-life was predicted by determining water activity (aw) and moisture content (MC) levels and plotting the water sorption isotherms (MSI). Ninety per cent of investigated samples (N=78) were found packaged in the materials of various quality conditions. It was found that the packaging materials mostly used is plastic films (63%), paper packets/bags (26%), hard papers (3%), plastic jars (1%) and …

Properties Of Boards Made From Rice Husk And Portland Cement As Binders And Reinforced With Sisal Fibres, Alex Mrema

Tanzania Journal of Engineering and Technology (TJET)

A research study demonstrated that rice husks can be used to manufacture boards which can be used in low cost housing if bound by Portland limestone cement (CEM II/A-L/ 32.5R) and reinforced with sisal fibers to cater for their brittle behavior and that such boards can provide a substitute for wood panels. Boards made of rice husks and cement in the ratios of 1/3.3, 1/ 3.6 and 1/4 and with sisal fiber reinforcement contents of 0%, 0.4%, 0.5% and 0.8% were prepared and tested for their physical and mechanical properties. The results were compared with standard requirements for boards made …

Methane Production By A Packed-Bed Anaerobic Digester Fed Dairy Barn Flush Water, Sean Richard Thomson

Master's Theses

Packed-bed digesters are an alternative to covered lagoon digesters for methane production and anaerobic treatment of dilute wastewaters such as dairy barn flush water. The physical media of packed-beds retain biofilms, often allowing increased treatment rates. Previous studies have evaluated several types of media for digestion of dilute wastewaters, but cost and media fouling have setback commercial development. A major operational cost has been effluent recirculation pumping.

In the present effort, a novel approach to anaerobic digestion of flush dairy water was developed at pilot-scale: broken walnut shells were used as a low-cost packed-bed medium and effluent recirculation was replaced …

A Strategic Approach To Effectively Manage Supplier Quality Within The Construction Industry, Rufaidah Almaian

Graduate Theses and Dissertations

The aim of the research is to determine the best practices for supplier quality management (SQM) in the construction industry that ensure that the supplied materials and equipment for construction projects are within the quality requirements. The research is based on three main objectives. The first objective is to describe and assess the process of assuring supplier quality inside and outside the construction industry. The second objective is to develop a framework for the supplier quality process based on the collection of SQM practices from multiple data sources. The third objective is to assess the SQM practices within the developed …

Lemongrass And Cinnamon Essential Oils As Vitamin C Preservatives And Flavour Enhancers In Jam, Denice Byarushengo

Tanzania Journal of Engineering and Technology (TJET)

Lemongrass and cinnamon essential oils (LEO and CEO) are natural oils with high anti oxidation capacity, pleasant flavour, and various health benefits. Their ability to preserve vitamin C and flavour in jam have not been tested. In this study the performance of two essential oils (EOs) in preserving vitamin C and improving jam flavour were investigated. The EOs were produced by hydro-steam distillation of fresh lemongrasses and cinnamon leaves using a Clevenger apparatus. Jam samples were dosed with various concentrations of either single or mixed EOs and then stored at either room or refrigeration temperature. Samples were analysed for changes …

Noise Pollution In Maize Milling Smes, Erasto Elias

Tanzania Journal of Engineering and Technology (TJET)

Maize milling SMEs emit high levels of noise which can have adverse effects on human beings and therefore require controlling. This paper reports on a study that involved assessment and measurement of noise level in maize milling SMEs in DSM and Morogoro urban, gathering opinions of workers and the neighbouring population on noise problems, and suggesting solutions for noise control. Noise measurements in 41 SMEs were recorded from 89-103 dBA in DSM and 92-103 dBA in Morogoro near the milling machines. These values were higher than the safe level of 85 dBA for 8 hours working shift. Measurement also indicated …

Analysis Of Different Techniques For Improving Performance Of Flat Plate Solar Collectors For Fruits Drying, Godfrey Mbabaye

Tanzania Journal of Engineering and Technology (TJET)

Fruits drying had become a broader technology in fruits and vegetables value addition. The technology is reported to be a promising way of drying without incurring higher cost but its adaptation has not been feasible in rural areas. Solar dryers have been developed but its poor performance limits its applicability. In this study, several techniques for modifications of traditional solar collector were addressed. It was observed that, varying collector designs in different techniques, a range of collector performances can be archived. The research shows that, collector efficiency can be improved by 9.6% when employing double duct counter flow compared to …

Parameterizing Analytical Models To Support An Empirically Based Warehouse Design Methodology, Lisa Thomas

Graduate Theses and Dissertations

Research in the area of warehouse design is characterized by a myriad of analytical models that address one, typically small and isolated, area of the warehouse. These models, although important in gaining insight into one question of warehouse design, are of limited value when one considers the larger question of overall warehouse design. Thus, research in the area of overall warehouse design typically consists of procedure-driven processes based on qualitative factors and not the quantifiable results of analytical models.

In contrast, practitioners have significant empirical data related to how a design alternative performs in an industry, a company, or a …

Isolation And Characterisation Of Micro-Organisms With Industrial Importance From Sisal Bole Rots, Consolatha Mhaiki

Tanzania Journal of Engineering and Technology (TJET)

Investigation of microorganisms naturally acclimatized to Agave hybrid H 11648 (sisal bole rot) was conducted, with the aim of isolating and characterizing Aspergillus niger strains for industrial use. Microorganism were identified morphologically and then confirmation made by polymerase chain reaction (PCR). Results showed the existence of four major groups, listed in order of abundances as follows; Aspergilli (36.0±0.8) %, Penicillin (28.0±0.1) %, Yeast (15.0±1.6) %and Fusarium (10.0±0.12) %. The main groups of Aspergilli strains were A. nidulans, A. tamari and A. niger in ratios (3:2:2), respectively. Several endo-spore forming non-enteric gram (-) rods and coccid bacteria identified by API 20 …

Improvement Of Hydraulic Press For Vegetable Oil Expression In Rural Areas, I. P. Bateebe

Tanzania Journal of Engineering and Technology (TJET)

Cultivation of oil producing crops especially Jatropha and croton as source of vegetable oil for biodiesel production is being encouraged in rural areas. To recover oil from seed, manual press is the feasible method in rural areas where there is no electricity. Research was conducted to improve hydraulic oil press machine for rural application. Factors affecting oil recovery were found to be: moisture content of seeds, operating pressure, seed oil content, and the amount of seeds pressed per batch. Percentage oil recovery was improved by reducing diameter of press cylinder, hence increasing expression pressure, and either reducing amount of seed …

Applications Of Cobb-Douglas Production Function In Construction Time-Cost Analysis, Ashkan Hassani

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Cobb-Douglas Production Function was widely used in economics and productivity studies across many sectors. The function’s quantitative modeling of resource inputs and production outputs is appealing to the research domain of construction management. In this thesis we explored this function’s application in construction schedule crashing and project risk analysis related to duration of construction projects. Existing research on construction time-cost tradeoff issues rarely explore the origin of the crashing cost which is defined as the cost needed to shorten the project to the desired duration. In the existing literature crashing cost function was either assumed without much justification, or came …

Probabilistic Resilience Quantification And Visualization Building Performance To Hurricane Wind Speeds, Berna Eren Tokgoz

Engineering Management & Systems Engineering Theses & Dissertations

Natural and man made disasters are unpredictable and unavoidable in today's world. Their frequency of occurrence and damages keep increasing. Due to the efforts to reduce negative consequences from such disasters, the concept of resilience has gained so much popularity in disaster management area especially after disasters like the September 11 attacks and Hurricane Katrina. Complex systems of today are under operational risks because of increasing threats and their high level of vulnerability. Hence, such systems need to adapt the concept of resilience for continuous operations. Resilience is a proactive concept which should incorporate both pre-event (preparedness and mitigation) and …

Integrated Planning For Rural Rail Transportation, Jeffrey Cohan Gwaltney

Graduate Theses and Dissertations

Population growth in rural areas has led to new interest in rail transportation. Planning a passenger rail system involves numerous difficult decisions, most representing a trade-off between customer service and cost. In this work, we attempt to integrate many of these planning decisions. We consider strategic decisions such as station location and vehicle procurement, as well as tactical issues that include vehicle scheduling. Our integrated model exploits the linear network structure that best suits many rural American communities, including Northwest Arkansas. Due to the intractability of the integrated rail planning problem, we have developed a customized heuristic approach to solve …

A Microsimulation Of Traffic, Parking, And Emissions At California Polytechnic State University – San Luis Obispo, Steven Michael Kilbert

Master's Theses

Traffic and parking congestion are significant issues at many universities nationwide. The delays experienced result in wasted time, money, and fuel for students, faculty and staff, not to mention the negative contributions to the environment. This paper quantifies the amount of vehicle emissions generated during an average morning peak hour in the university environment. Using VISSIM and CMEM microsimulation packages, a model is created for California Polytechnic State University- San Luis Obispo to aggregate the collective transportation behaviors and practices of the campus and recognize the implications these behaviors pose on the transportation network as a whole. Reasonable estimates are …

Renewable Energy Integration: An Approach For Micro-Grid Optimization., Nicolas Lopez

Open Access Theses & Dissertations

This thesis explores the Renewable Energy Integration Problem beginning with a literature review on the different sources of electrical energy classified as Non-Renewable and Renewable, stating that the integration of renewable sources within the pre-existing Power-Grids is a current worldwide problem that is being addressed with different approaches.

The impossibility to exactly model the different equations relating the electric output of the renewable energy sources as they relate with meteorological factors, makes the renewable sector a stochastic component of the overall mathematical model, where it can be concluded that most of the problem is in the area of the forecast. …

Calibration Of Hdm-4 For Use In Pavement Management Systems (Pms), Nurdin Mushule

Tanzania Journal of Engineering and Technology (TJET)

One of major problems of road management in developing countries is the lack of decision making tools for preparing road maintenance programmes. This results in poor resource allocation and poor utilisation of existing assets. Pavement management systems (PMS) have been developed around the world in order to assist with the pavement management process in a co-ordinated and systematic manner. Some developed countries have derived pavement performance models that are suited to local conditions by setting up long term pavement performance studies. Conversely, most developing countries do not have the resources required to set up similar large-scale field experiments. However, validation …

Potential Use Of Waterguard As A Disinfectant For Domestic Water Use, Yohana L

Tanzania Journal of Engineering and Technology (TJET)

been identified as an alternative method for treatment of domestic drinking water. The aim of this study was to investigate the effectiveness of Water Guard in disinfecting drinking water from different sources drawn from Kinondoni district, Dar es Salaam as well as to establish appropriate dosage that can be used during the treatment. Results showed that, a dose of 4.0mL per 20 litrer of water guard is sufficient for disinfection of urban water sources. The above prescribed doses provide 100% disinfection efficiency with residue chlorine of less than 0.3mg/l. Water with turbidity values of 30-35 NTU, chlorine dosage of 8mL/20 …

Improving The Design Of Low Volume Sealed Roads In Tanzania, Mfinanga A

Tanzania Journal of Engineering and Technology (TJET)

The main objective of the study was to identify appropriate road designs for Low Volume Sealed Roads (LVSRs) with the aim of improving the design of such roads in Tanzania. The study was conducted in Dar es Salaam and Morogoro regions in Tanzania where data for LVSRs were collected from primary and secondary sources in the two regions. The study found that by using an improved pavement design method specifically meant for LVSRs results in cost savings for LVSRs of up to 51% compared with the conventional method of pavement design in Tanzania. The study recommends that the pavement design …