Industrial Engineering Commons^™

Toward Sustainability, High Density And Short Response Time By Live-Cube Storage Systems, Nima Zaerpour, Yugang Yu, René De Koster

12th IMHRC Proceedings (Gardanne, France – 2012)

This paper studies random storage in a live-cube storage system where loads are stored multi-deep. Although such storage systems are still rare, they are increasingly used, for example in automated car parking systems. Each load is accessible individually and can be moved to a lift on every level of the system in x- and y-directions by a shuttle as long as an open slot is available next to it, comparable to Sam Loyd’s sliding puzzles. A lift moves the loads across different levels in z-direction. We derive the expected travel time of a random load from its storage location to …

Process Analysis For Material Flow Systems, Thorsten Schmidt, David Wustmann, Robert Schmaler

12th IMHRC Proceedings (Gardanne, France – 2012)

This paper describes a generic approach for analysis of internal behavior of logistic systems based on event logs. The approach is demonstrated by an example of event data from the simulation model of an automated material handling system (MHS) in a manufacturing company. The purpose of the analysis is the identification of design and operation problems and their causes, prospectively. As a result, the simulation model developer obtains the condensed and ranked information on events. These events describe the internal system behavior with anomalies pointing at either possible problems or capacity reserves.

A Study On Storage Allocation In An Automated Semiconductor Manufacturing Facility, St´Ephane Dauz`Ere-P´Er`Es, Claude Yugma, Ahmed Ben Chaabane, Ahmed Ben Chaabane, Lionel Rulli`Ere, Gilles Lamiable

12th IMHRC Proceedings (Gardanne, France – 2012)

This paper deals with the allocation of storage capacity in the automated material handling environment of a semiconductor wafer manufacturing facility. The impact of the allocation of stokers to machines in semiconductor fabrication facilities (fabs) is very little studied, although it significantly impacts the efficiency of the Automated Material Handling System (AMHS). After motivating and describing the problem of allocating unitary stokers to machines, a first local approach is discussed. We then propose a Mixed Integer linear Programming model to solve the global problem with two objectives: Minimizing the total maximum travel distance of vehicles and balancing the utilization of …

Design & Modeling Of A Single Machine Flow Rack As/Rs, Zaki Sari, Nadir Hakim Bessenouci

12th IMHRC Proceedings (Gardanne, France – 2012)

In this paper, we aim to introduce a new variation of the flow rack automated storage and retrieval system (AS/RS) using a single machine for storage and retrieval operations instead of two machines. Also, analytical expressions are derived for expected single and dual cycle times of the storage and retrieval machine. For that, randomized storage assignment, and Tchebychev travel are assumed. Two dwell point positions are investigated and compared to determine the best one. Finally an experimental validation using simulation is conducted to verify the quality of the developed.

An Mip Approach To The U-Line Balancing Problem With Proportional Worker Throughput, Reyhan Erin, Andres L. Carrano, Moises Sudit

12th IMHRC Proceedings (Gardanne, France – 2012)

One of the major challenges faced by manufacturing companies is to remain competitive in dynamic environments, where fluctuations in customer demand and production rates require systems capable of adapting in a practical and economical way. A U-shaped production cell is considered one of the most flexible designs for adapting the workforce level to varying conditions. However, re-balancing efforts are time consuming and often require a new work allocation and line design. In this paper, a two-stage MIP model to determine the best cell design under varying workforce levels is proposed. The model seeks to maintain proportionality between throughput and the …

A Yard Crane Scheduling Problem With Practical Constraints, Amin Hossein Gharehgozli, Yugang Yu, Rene De Koster, Gilbert Laporte

12th IMHRC Proceedings (Gardanne, France – 2012)

The problem considered in this paper is to locate storage containers while a set of container storage and retrieval requests are sequenced. Two automated cranes stack and retrieve containers in a single block of a yard. The cranes cannot pass each other and must be separated by a safety distance. Storage containers are initially located at the seaside and land side input/output (I/O) points of the block. Each must be stacked in a specific location of the block, selected from a set of open locations suitable for stacking the storage container. Retrieval containers are initially located in the block and …

Modeling The Inventory Requirement And Throughput Performance Of Picking Machine Order-Fulfillment Technology, Jennifer A. Pazour, Russell D. Meller

12th IMHRC Proceedings (Gardanne, France – 2012)

Picking machines, also known as remote-order-picking systems, are an example of a stock-to-picker piece-level order-fulfillment technology that consists of two or more pick stations and a common storage area. An integrated closed-loop conveyor decouples the pick stations from the storage area by transporting the needed totes to and from the storage area and the pick stations. We develop a probabilistic model capable of quantifying the inventory differences between order-fulfillment technologies that pool inventory with technologies that do not pool inventory. To determine the throughput of a picking machine, we develop a methodology that incorporates existing analytical models for the picking …

Dock Assignment And Truck Scheduling Problems At Cross-Docking Terminals, Ching-Jung Ting, Amanda G. Rodríguez López

12th IMHRC Proceedings (Gardanne, France – 2012)

In this paper, we consider the integration of dock assignment and truck scheduling problem at cross-docking terminals. The problem is first formulated as a 0-1 integer programming model. Since both dock assignment and truck scheduling problems are NP-hard, its integration is more difficult to solve. Thus we propose reduced variable neighborhood search (RVNS) algorithms to solve the problem. Computational experiments are carried out on four set of instances. The results show that RVNS is capable of finding good solutions in a much shorter computation time when it is compared with optimization solver Gurobi’s solutions.

Simulation-Based Optimisation Model For The Lean Assessment In Sme: A Case Study, Amr Arisha, Amr Mahfouz, John Shea

Conference papers

Due to their space limitation and small production scale, small and medium enterprises (SME) are vulner-able to rapid changes. Lean principles are considered as effective improvement approach to eliminate sys-tem’s waste and inefficiencies. Although much of the academic materials have addressed the lean practic-es into large, global companies, they can still be adjusted to SMEs. Risks are usually associated with lean implementation process due to the drastic required changes in business policies and operations. Simulation can be successfully used to predict the impact of the proposed changes ahead of the implementation which helps to mitigate risks. Integrating simulation with optimization …

Supply Chain And Logistics Technology Investment In Small And Medium-Sized Enterprises, Edward Sweeney

Practitioner Journals

No abstract provided.

An Empirical Investigation Of Supply Chain Excellence In Healthcare, Brian Keith Smith

Graduate Theses and Dissertations

This research is motivated by opportunities to improve the cost and quality of healthcare delivery through improved supply chain processes. This research assesses the quality of the healthcare supply chain and identifies factors that are driving supply chain excellence among organizations in the healthcare industry. The first objective of this research is to assess the state of quality measurement in the healthcare supply chain. The achievement of this first objective is presented in Chapter 3 of this dissertation in the form of a manuscript accepted for publication in The Quality Management Journal. The second research objective is to develop …

An Integrated Decision Support Framework For Remanufacturing In The Automotive Industry, Akhilesh Kumar

Wayne State University Dissertations

In today's global economy, firms are seeking any and every opportunity to differentiate from competitors by reducing supply chain costs and adding value to end customers. One increasingly popular option, under growing consumer awareness and increasing legislation, is to reintegrate returned products into the supply chain to achieve economic benefits as well as improve sustainability. An important class of such "reverse" goods flows has to do with remanufacturing (reman), which refers to activities that restore returned products ("cores") or their major modules to operational condition for using in place of new product or distributing through other channels (e.g., spare parts). …

Perspectives On Quality Coordination And Assurance In Global Supply Chains, Ling Li, John N. Warfield

Information Technology & Decision Sciences Faculty Publications

The 2007 recall of Berko Electric Toe-Space Heaters made in the US, the recall of backpack blowers made in Japan, the recalls of toys and pet food produced in China have exposed the potential of global supply chain disruptions. This product recall storm leads to the issue of quality assurance in global supply chain management. Product recalls indicate that manufacturing companies are particularly vulnerable to ensure quality when they source via a global supply chain with poor visibility. Obviously, a supply chain cannot afford this kind of sourcing and supply structure that threatens the supply-chain integrity. This special issue on …

Spiral Facility Layout Generation And Improvement Algorithm, Hatice E. Sanli, Fahrettin Eldemir

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

This study is concerned with construction and improvement of a facility layout heuristic called Spiral Facility Layout Generation and Improvement Algorithm (SFLA). The algorithm starts with positioning departments from center point and continues like a hologram from center to outside. The aim of any facility layout algorithm is to better allocate the departments within facility. SFLA is compared with the existing space filling curve methods, MCRAFT and MULTIPLE, that are available in the literature. To form an initial spiral curve, a block system is used, like the bands for MCRAFT. The width and length of the blocks are given by …

Empirically-Based Warehouse Design: Can Academics Accept Such An Approach?, James M. Apple Jr., Russell D. Meller, John A. White Jr.

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

It is our opinion that existing research is not sufficient to support the design of a warehouse. As a result, facility designers that work in practice are left to face the design process with their own methods. These methods are in stark contrast to the analytical models developed in academia in that they are highly based on empirical observations. Supported by a collection of empirical observations, facility designers who work in practice employ an ad hoc design process. We present a design process based on empirical observations and then formalize it so that it can be taught and used. We …

Dispatching Vehicles Considering Uncertain Handling Times At Port Container Terminals, Vu Duc Nguyen, Kap Hwan Kim

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

This paper considers the problem of vehicle dispatching at port container terminals in a dynamic environment. The problem deals with the assignment of delivery orders of containers to vehicles while taking into consideration the uncertainty in the travel times of the vehicles. Thus, a real-time vehicle dispatching algorithm is proposed for adaptation to the dynamic changes in the states of the container terminals. To evaluate the performance of the proposed algorithm, a simulation study was conducted by considering various values of decision parameters under the uncertainty in travel times. Further, the performance of the proposed algorithm was compared with those …

Blocking Effects On Performance Of Warehouse Systems With Automonous Vehicles, Ananth Krishnamurthy, Sunderesh Heragu, Charles Malmborg

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Distribution centers are under increasing pressure to adopt material handling systems that offer greater flexibility to improve cycle time and throughput capacity in the transfer of unit loads in their high density storage areas. Autonomous Vehicles-based Storage and Retrieval Systems (AVS/RS), have been shown to hold significant promise in this context. In these systems, loads are transferred by autonomous vehicles. Vehicles support horizontal load movement along aisles and cross-aisles within a tier, and lifts support vertical movement between tiers. Existing research in AVS/RS, do not explicitly account for the potential blocking of vehicles and lifts while they are processing transactions. …

Merge Problems With High Speed Sorters, Dirk Jodin, Andreas Wolfschluckner

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

To meet customer demands on distribution the necessity of sorting systems for unit loads in regard to quantity and capacity is growing up constantly.

Due to that, manufactures offer powerful sorting machines with a capacity up to 15.000 pieces per hour. Those machines are for instance Crossbelt or Tilt-Tray sorters. The output of these sorters is calculated by the equation of throughput.

The point of interest is the merge, referring to the overall efficiency of the single sorter. The motion sequence during merging has to be absolutely quick and precise to achieve exact positioning using minimized distances of the single …

The Future Of Modeling In Material Handling Systems, Leon F. Mcginnis

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Today, when we talk about “modeling” in the context of material handling systems, invariably we are referring to a mathematical or computational model for analyzing some aspect of the system, such as its throughput rate, response time, cost of ownership, required storage capacity, etc. Creating these kinds of models requires considerable knowledge in at least two domains the material handling system domain, and the analysis methodology domain—and considerable skill in the “art of modeling” in order to express the former in the terms of the latter. The results can be somewhat ad hoc—e.g., two different modelers are likely to create …

Optimizing Distribution Center Configuration: A Practical View Of A Multi-Objective Problem, Russell D. Meller, Lisa M. Thomas

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

The shape of a distribution center, as well as whether dock locations are on one side or two sides of the facility, impacts measures like travel distances and the number of dock locations that may be utilized. Thus, for a required number of pallet locations, there are multiple combinations of distribution center shape and dock configurations that should be evaluated against multiple measures. We have developed a practical model for making such evaluations and illustrate the model with data reflective of a partner in the Center for Engineering Logistics and Distribution.

The Effect Of Interaction Between The Production System (Ps) And A Looped Conveyor-Based Material Handling System (Lcmhs) In A Manufacturing Facility, Vernet Lasrado, Dima Nazzal

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In this paper, we provide empirical evidence that shows the effect of the interaction between the production system (PS) and a looped conveyor-based material handling system (LCMHS) in a manufacturing facility. A rudimentary simulation model captures the interaction between the two systems. Varying several key factors, we test for a statistically significant difference in the work in process (WIP) of the production system with and without the LCMHS to find if the squared coefficient of variation (SCV) of the interarrival time distribution to the PS is affected. The results suggest the need to model the interaction between the two systems …

Design Of Warehouse For Material, Which Is Non-Uniform And Difficult To Handle, Andrea Seidlova, David Sourek

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Main goal of this paper is warehouse layout optimization with emphasis on maximum space utilization. It is about rack system design, which leads to capacity maximization of warehouse for non-uniform material with heavy weight. The warehouse system has to enable at least partial automation (the possibility to use AS/RS system), minimization of service time and minimization of man effort. Initial constraining conditions for warehouse design in our case are warehouse area, maximum load of racks or shelves, maximum allowed floor load and existing location of arrival road for material loading and unloading.

Webasrs – A Web-Based Tool For Modeling And Design Of Abstract Unit-Load Picking Systems, Jeffrey S. Smith, Sabahattin Gokhan Ozden

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

This paper describes a web-based tool that supports the modeling and design of abstract unit-load picking systems. The term “abstract” implies that the model is not specific to any equipment or vendors’ products, but, instead, focuses on the generic system components such as pallets, racks, slots, forklifts, cranes, etc. that comprise typical unitload picking systems. The objectives of the tool are to support the design of an AS/RSbased or a manual forklift-based picking system based on a set of design parameters and to be able to convert from an AS/RS design to a flat warehouse design and vice versa. The …

A Flowshop Scheduling Problem With Transportation Times And Capacity Constraints, Abraham Mendoza, Jose A. Ventura, Kwei Long Huang

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Although there are numerous methodologies and research studies on machine scheduling, most of the literature assumes that there is an unlimited number of transporters to deliver jobs from one machine to another for further processing and that transportation times can be neglected. These two assumptions are not applicable if one intends to generate an accurate schedule for the shop floor. In this research, a flowshop scheduling problem with two machines, denoted as M1 and M2, and a single transporter with capacity c is considered. The main focus is on the development of a dynamic programming algorithm to generate a schedule …

Optimization Of Costs And Service Level By Choosing The Best Customer Order Decoupling Point, Michael Schmidt, Detlef Spee

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

The customer order decoupling point (CODP) as the link in the supply chain between processes based on uncertain information, such as sales forecasts, and certain information in the form of customer orders is crucial for production efficiency, storage costs, and the quality of logistics. This paper focuses on developing an approach for identifying a CODP that provides the highest potential for achieving business objectives. Within the context of the above-mentioned topics, this paper focuses on the interrelations and the tradeoffs that have to be made when positioning the COPD. The goal of the paper is to present an effective and …

Distribution Planning Considering Warehousing Decisions, Pratik J. Parikh, Xinhui Zhang, Bhanuteja Sainathuni

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Modern supply chains heavily depend on warehouses for rapidly fulfilling customer demands through retail, web-based, and catalogue channels. The traditional approach that considers warehouses as cost-centers has affected the profitability of numerous supply chains. A lack of synchronization between procurement and allocation decisions causes warehouses to scramble for resources during peak times and be faced with under-utilized resources during drought times. Warehouses, however, have emerged as service-centers and it is imperative that warehousing decisions be an integral part of supply chain decisions. In this paper we propose a mixed-integer programming model to integrate warehousing decisions with those of inventory and …

Gains In The Life-Cycle Of Adaptable, Self-Organizing Material Handling Systems, Jan R. Nopper, Guido Follert, Michael Ten Hompel

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Compared to conventional material flow controls, self-organized material handling systems and the Internet of Things in facility logistics promise several advantages during the life-cycle. Most important is the increased adaptability in case of expansions or modifications due to a consistent modular design; this also promotes an increased robustness due to clearly defined interfaces and a decreased complexity of each module. The use of RFID technology increases the availability of real-time data about the system and the transported units. However, the introduction of self-organized material handling systems also causes costs, e.g. for necessary RFID tags and readers. Against this background, it …

Determining Warehouse Storage Location Assignments Using Clustering Analysis, Carl Egas, Dale Masel

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

The methodology used to assign products to a storage location in a warehouse can have a significant impact on the amount of time required to retrieve all of the items needed to fill an order. This paper describes a methodology that uses a clustering approach to determine storage assignments, where the metric of the strength of the relationship between two stock-keeping units (SKUs) is the number of times that the SKUs appear in the same order. Clustering is performed to maximize the frequency with which SKUs in the same cluster are ordered together. In testing, the clustering assignments were compared …

Using Data Envelopment Analysis To Evaluate The Performance Of Third Party Distribution Centers, Ching-Jung Ting, Hsueh-Lin Fang

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

There has been considerable interest worldwide in last few years in the growth of third party logistics (3PL) providers. 3PL distribution center (DC) enables firms to achieve reduced operating costs, increased revenues, and to focus on their core competence. This research aims to find the key performance indicators through a survey of a set of DCs and then evaluate their efficiency over the period 2005-2007 using data envelopment analysis (DEA) models based on selected performance indicators as inputs and outputs. Three inputs and two outputs for all DCs from the surveyed performance indicators were selected in this study. DEA is …

Freight Sequencing To Improve Hub Operations In The Less-Than-Truckload Freight Transportation Industry, Xiangshang Tong, Kimberly Ellis, Amy Brown Greer

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In less-than-truckload freight transportation, hub operations affect the service levels that carriers are able to provide their customers. This paper focuses on improving the efficiency of hub operations by reducing freight handling time and cost. Specifically, the freight sequencing problem (FSP) is investigated to determine the freight unloading and loading sequence that minimizes the time for dock workers to transfer shipments from origin trailers to destination trailers. The FSP is modeled as a Rural Postman Problem (RPP) and three algorithms are compared: trailer-at-atime, nearest neighbor, and balance-and-connect. Using five industrial data sets, the results demonstrate the effectiveness, advantages, and disadvantages …