Operations Research, Systems Engineering and Industrial Engineering Commons^™

Research On Control Strategy For Shortest Time Occupancy Of Auv Based On Improved Td3, Wenzhe Ren, Min Li, Xiangguang Zeng, Tao Zhang, Dijie Xie, Bei Peng

Journal of System Simulation

Existing occupancy models fail to fully consider the interference of underwater time-varying ocean currents and task time constraints, and AUVs lacks real-time motion control. To address these issues, a shortest time occupancy method based on quantile regression and distributed TD3 was proposed. The Bayesian inference method was used to identify hydrodynamic parameters, and the kinematic and dynamic models of AUVs were established; the shortest time occupancy equation was constructed, and the occupancy target point and occupancy time were solved; a first-order Gauss-Markov process was introduced to simulate the time-varying ocean current environment, and the training of control strategy for AUV …

Impact Angle-Constrained Dive Maneuver Guidance Method For Hypersonic Vehicles, He Wang, Gang Lei, Shaopeng Li

Journal of System Simulation

To address the impact angle control and maneuvering flight problem of hypersonic vehicles in the dive phase, this paper proposed a tracking guidance method integrating optimal Bézier curves and super-twisting sliding mode control. A three-dimensional Bézier curve trajectory satisfying the impact angle constraint was designed, and the maneuvering flight in dive phase was achieved by adding dynamic control points; to optimize impact velocity, a rapid calculation method for the impact velocity of the vehicle flying along the curve was derived, and the optimal reference trajectory was obtained by optimizing the control point parameters through sequential quadratic programming; to ensure …

Two-Stage Calibration And Optimization Method For Microscopic Traffic Simulation Model Parameters Based On Neural Network Surrogate Models, Yijia Liu, Chenjing Zhou, Dong Pan, Jian Rong, Yang Xiao

Journal of System Simulation

A two-stage calibration and optimization method is proposed to address the problem that parameter calibration methods for microscopic traffic simulation models are time-consuming. In the first stage, a surrogate model based on neural networks is trained to establish the mapping relationship between model parameters and evaluation indicators, and a genetic algorithm (GA) is combined to screen candidate parameters. In the second stage, after obtaining the approximate optimal parameters, by employing this set of parameters as initial values, a genetic algorithm is re-executed by combining the real simulation model for optimization to further improve calibration accuracy. Experimental results show that the …

Application Of Improved Multi-Objective Differential Algorithm In Robotic Arm Multi-Objective Trajectory Planning, Manqiang Liu, Ziqiang Shang

Journal of System Simulation

It is difficult for single-objective trajectory planning methods to meet the requirements of precision, diversity and complexity of robotic arms. A trajectory planning model based on an improved multi-objective differential evolution algorithm (guided multi-objective differential evolution, GMODE) algorithm is proposed. Cubic polynomial interpolation and B-spline curves are employed to construct multi-objective functions, while GMODE is adopted to overcome the limitations of traditional algorithms, such as insufficient population diversity, the tendency to fall into local optima, and slow convergence. A grouping strategy, parameter generation mechanism, and elite mutation based on fuzzy Cmeans clustering are introduced to optimize B-spline control nodes. …

Current Status And Prospects Of Complex Scene Reconstruction Based On Gaussian Splatting, Hong'an Li, Jiale Yang, Qingfang Liu, Yu Shi

Journal of System Simulation

Three-dimensional Gaussian splatting (3DGS) provides an alternative approach for novel view synthesis from the perspective of explicit representation. By reconstructing scenes using 3D Gaussian primitives and replacing traditional ray integration with a point-based rasterization process, it not only improves training and rendering efficiency but also offers new insights for complex scene reconstruction. This paper divided 3DGS-based complex scene reconstruction methods into three major categories and elaborated on them around large-scale scenes, sparse views, and dynamic scenes. It reviewed the current development status of this field and pointed out possible future research directions.

Experimental And Simulation Study On Energy Release Of Extended Sources Influenced By Atmospheric Pressure Variation, Kai Guo, Feiyu Zhao, Hao Zhang, Liang Wang, Kai Zhang

Journal of System Simulation

To investigate the energy release characteristics of extended sources in low-pressure environments, a combined experiment and simulation approach was adopted. Four typical altitudecorresponding pressures were selected as experimental conditions. An infrared thermal imager was employed to monitor parameters such as combustion temperature, radiance, and combustion area during the combustion process of the extended source. When the pressure decreases from 101 kPa to 30 kPa, the ignition time of the extended source doubles; the total energy release attenuates by 44.78%, and the combustion area reduces by 45.95%, but the fluctuations of peak temperature and average temperature are less than 3%, …

Research On Output Feedback Control Based On Reinforcement Learning For Overhead Crane, Minghui Li, Daoxiang Gao

Journal of System Simulation

An output feedback control algorithm is designed based on reinforcement learning for the optimal control problem of overhead crane system. A high gain observer (HGO) is designed using output data to estimate the unmeasurable states of the overhead crane system. Based on the estimated states from the high-gain observer, a policy iteration (PI) method is designed with integral reinforcement learning, which uses Critic and Actor neural networks to approximate the optimal value function and control strategy, and adjusts the neural network weights in real time through online adaptive algorithms. According to the Lyapunov stability theory, the uniform ultimate boundedness of …

Object Detection Networks And Their Interpretability In Rain, Fog, And Snow Scenarios, Yanji Jiang, Jiayu Cui, Hao Dong, Daqian Liu, Bowen Fei, Miao Yu, Jinshan Huang

Journal of System Simulation

To address the severe degradation of object detection performance under extreme weather conditions, a detection framework based on the Kolmogorov-Arnold theorem, termed KADet, is proposed. A dynamic Kolmogorov-Arnold Transformer is designed, which leverages learnable nonlinear activation functions to enhance the modeling capability for complex distortions introduced by weather degradation. A Kolmogorov-Arnold spatial-channel network is developed by integrating KAT convolution with spatial-channel convolution to strengthen feature learning of relationships between targets and backgrounds in degraded scenes. An improved loss function is introduced to guide the optimization of the activation functions, and interpretability is analyzed through visualization of their curves. …

Pattern Identification And Mechanism Analysis Of Nonlinear Oscillations In Grid-Connected Direct-Drive Wind Turbines, Libin Wen, Shaopu Tang, Xianfa Hu, Jinji Xi, Tongtong Zhang, Hong Hu, Weijie Zhang

Journal of System Simulation

Taking a grid-connected direct-drive wind turbine system as an example, a comprehensive model is developed that incorporates nonlinear elements such as prime mover control, machine-side and grid-side converter control, multiple limiters, and control switching. A nonlinear oscillation pattern identification method based on density clustering and manual identification is proposed. The results show that the proposed method can efficiently identify various typical patterns, including quasi-constant amplitude oscillations, period-doubling oscillations, and chaotic oscillations. Oscillations dominated by nonlinear factors such as control switching, limiter collision, and limiter saturation are essentially caused by the transition of the associated components from passive responses to …

Iterative Evolution And Innovation Of Simulation-Based Experimental Teaching In Software Engineering, Jun Guo, Yixian Liu, Lianbo Ma, Jian Liu, Chunyan Xu

Journal of System Simulation

In view of the structural disconnection between talent training and industry needs caused by the limitations of traditional computer experiment teaching in scenario authenticity, technological frontier, interdisciplinary integration, and student subjectivity, this paper proposed and practiced a new simulation-based experimental teaching system deeply integrating Chinese educational wisdom. Taking "incremental progress and learning by guided inquiry" as the core philosophy, through a four-in-one paradigm transformation of "task modularization, scenario virtualization, technological frontier, and integration deepening", this paper promoted the teaching to shift from closed skill verification to open engineering innovation and constructed a complete implementation path including "closed-loop iterative teaching process" …

Robot Friction Force Compensation Algorithm Integrating Temperature And Speed Factors, Jinwang Lü, Ankai Ying, Ming Li, Tao Song, Jie Zhang, Fanghui Qiu, Changcheng Shi, Guokun Zuo, Jialin Xu

Journal of System Simulation

Insufficient friction force compensation accuracy degrades motion smoothness, stability, and assistive compliance of elbow joint rehabilitation robots. To address this issue, an improved Stribeck friction force model integrating temperature and speed factors was proposed. The model employed an exponentially decaying friction factor to describe the characteristic that the increase rate of friction force slowed down with the rise of the robot's operating speed and designed a viscous function considering temperature effects to suppress friction force fluctuations caused by temperature changes. Experimental results indicate that the model achieves stable friction force compensation under different operating states of the robot and has …

A Smart Contract Framework For Project Financing In Gold Mining Operations: Implications For Improved Financial Forecasting, Silvia Lydia Priskilla, Mohammed Ali Berawi, Mustika Sari Dr.

Smart City

Gold mining projects are characterized by high capital intensity and significant operational variability, making financial forecasting particularly sensitive to the quality and timing of cash-flow data. In practice, conventional financing systems rely on multi-stage administrative processes that create delays between work completion and payment realization, reducing the reliability of financial records used for investment evaluation.

This study aims to develop a smart contract-based financing framework to improve the accuracy of profitability projections in gold mining projects. A case study approach is employed using operational and financial data from a mining project in Sumatra over the period 2023–2026. The analysis combines …

Integrasi Metodologi Hazop Dalam Pengendalian Risiko Dan Keberlanjutan Operasional Pada Unit Pemulihan Urea: Studi Kasus Pada Industri Pupuk, Riny Yolandha Parapat, Arin Nur'aini Putri, Aryasatya Ramadhan Sukresno

National Journal of Occupational Health and Safety

The fertilizer industry is one of the chemical sectors with high-risk potential due to its operational processes involving hazardous materials as well as extreme pressure and temperature conditions. This study aims to identify and analyze hazards in the urea recovery unit using the Hazard and Operability Study (HAZOP) method, while also formulating effective risk control strategies to support the operational sustainability of the plant. The study was conducted directly at a commercial fertilizer plant in West Java using a semi-quantitative approach, which included field observations, review of technical documents such as Process Flow Diagrams (PFD), Piping and Instrumentation Diagrams (P&ID), …

Leveraging A Centralized Fleet Assignment Management For An Aviation Resilience, Inof Seno Acton Mr., Sutanto Soehodho, Nahry Yusuf

Smart City

Since deregulation in the aviation industry, competition among airlines has intensified. This competition is shown by the increasing number of routes, service times, aircraft, and airports served. This competition causes not all flight services to meet their targets, resulting in aircraft operating less efficiently. Passenger seats are not filled, and flight delays are becoming more frequent. Obviously, this will negatively impact consumers and the airline's finances. The study focused on assigning the fleet used to serve flights to maintain existing aviation services and improve aircraft operational efficiency. This study aims to maximize profits by optimizing fleet assignments through the Centralized …

Customer Adoption And Trust In Indonesian Islamic Banking: A System Dynamics Perspective, Imam Wahyudi Mr., Komarudin Komarudin, Prof. Rifki Ismal

ASEAN Marketing Journal

Research Aims: This study reframes the growth challenge of Indonesia’s Islamic banking as a financial-service marketing problem: strengthening customer adoption, trust, and perceived value to expand market penetration in a dual-banking environment while maintaining resilience.

Design/Methodology/Approach: Using a system dynamics perspective, the study develops a causal loop diagram (CLD) grounded in a review of policy-document and prior empirical marketing/Islamic banking literature. A multi-actor lens is applied to map how regulators, government, customers, conventional banks, fintech, and ESG investors shape adoption and competitive dynamics.

Research Findings: The CLD identifies seven reinforcing loops that can accelerate adoption and market share (capability reinvestment, …

Adopting Critical Power Grid Infrastructure Technologies: An Organizational Cybersecurity Assessment Against Ransomware, Fayez Alsoubaie

Dissertations and Theses

For many years, researchers and practitioners have studied emerging technologies in field of energy production and distribution. Power grid systems carry major weights in the energy branch of the economy. Researchers and scientists have been interested in finding ways to connect the power grid gap and improve protection for its technologies.

The research supports organizational adoption and prioritization of critical cybersecurity technologies for ransomware protection in power grid infrastructure. As utilities increasingly integrate digital technologies, they become more vulnerable to sophisticated cyberattacks that can disrupt services and put public safety at risk. The main focus of the study is to …

Integrating Production And Repair Operations Through Data Driven Defect Flow Analytics For Yield And Resource Optimization In Pcba Manufacturing, Ali Tahmasebi, Yingge Zhou, Daryl Santos, Sai Srikanth Reddy Kolli, Edward Wong

Systems Science and Industrial Engineering Student Scholarship

In Printed Circuit Board Assembly (PCBA) manufacturing, maintaining a closed loop connection between production and repair operations is critical to improving product quality and operational efficiency. However, in the manufacturing environment that motivated this work, production and repair data are often managed separately, and repair findings are not systematically fed back to production teams, limiting visibility into defect routing patterns and repair workload drivers. This study developed a data-driven framework that integrates production and repair data streams to analyze defect flow and support repair resource planning. The framework applies descriptive statistics, cross tabulations of repair inflow by product/project and repair …

A Simulation-Based Lean Six Sigma Framework For Process Optimization In Textile Manufacturing Toward Industry 4.0, Md Shafiqul Islam Chowdhury

Masters Theses

This study focuses on integrating simulation modeling with Lean Six Sigma (LSS) within the DMAIC (Define, Measure, Analyze, Improve, Control) framework for process optimization in textile manufacturing industry. Although traditional LSS framework such as Value Stream Mapping (VSM) and Root Cause Analysis are effective in identifying waste, they mainly rely on static and historical data which make their capability limited for real analysis or predictive decision making. As a result, many textile manufacturing processes still face challenges such as production delays, excessive work-in-process (WIP), high cycle time, and inefficient resource utilization. To address this issue, this research proposes a simulation-based …

Hydpn: A Hybrid Deep Reinforcement Learning, Programming, And Neighborhood Operations Framework For Integrated Scheduling On Parallel Batch Processing Machines, Yuqi Wang, He Luo, Guoqiang Wang, Zhaoxia Wang

Research Collection School Of Computing and Information Systems

Batch processing machines (BPMs) are widely used in industries such as semiconductors, metal processing, and healthcare, where jobs are processed in batches. As production, inventory, and distribution become increasingly integrated to improve efficiency, research on their joint scheduling in parallel BPM environments remains scarce. This paper addresses the integrated scheduling problem in parallel BPMs, involving production, inventory, and distribution stages, with the objective of minimizing total costs. A unified cost-based model is first formulated, applicable to both in-facility and external distribution scenarios. A hybrid algorithm framework, HyDPN, combining deep reinforcement learning, dynamic programming, and neighborhood operations is proposed. Extensive experiments …

A Novel Hexagonal-Zigzag Cellular Infill Structure For Additive Manufacturing, Md. Saidur R Roney, Amm Nazmul Ahsan, Prosenjit Barua

Manufacturing & Industrial Engineering Faculty Publications

The rigidity of the Additively Manufactured objects can be tailored by manipulating the infill lattice type and density. In this research, an island type novel infill structure termed as Hexagonal-Zigzag pattern is introduced, and its mechanical performance is investigated. In this pattern, the zigzag raster reflects the repeating hexagonal shaped cell constituting the parallel-oriented islands and 90° rotation of the pattern in each layer distributes the island span along both transverse and longitudinal directions of the printing contour. A mathematical model is established to illustrate the effect of the infill parameters on hexagon unit cell size and relative infill density. …

Extensive And Intensive Margin Labor Supply On Ride-Sourcing Platforms, Hao Sun, Hai Wang, Zhixi Wan

Research Collection School Of Computing and Information Systems

The rapid expansion of ride-sourcing platforms has enabled freelance drivers to flexibly determine both their participation and working hours. Understanding this flexible labor supply behavior is essential for managing platform capacity and evaluating the impacts of pricing and incentive policies on driver welfare. This study develops a labor supply model in which drivers optimally choose whether to participate (extensive margin) and how long to work (intensive margin) to maximize their utility from consumption and leisure. The model incorporates heterogeneity in drivers’ other income, idle time, and participation costs, allowing us to analytically characterize equilibrium labor supply decisions. The results show …

Can Generative Ai Make Farming Decisions? Current Status And Future Pathways: A Case Study In Row Crop Production With Chatgpt, Nipuna Chamara, Yufeng Ge, Joe Luck, Yu Pan, Saleh Taghvaeian, Cory Walters, Christopher Proctor, Daran Rudnick, Daren Redfearn

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The agricultural decision-making process is experience-based, knowledge-dependent, time-sensitive, complex, and driven by historical data. Planting, fertilization, irrigation, and chemigation are key categories in farm decision-making, and currently there is no one-shot decision-support tool that covers all these activities. Generative Artificial Intelligence (AI) models are more advanced than traditional machine learning and deep learning models. These models have been trained on vast amounts of data from the internet, allowing them to accept unstructured data in various forms and generate human-like text, solutions to problems, and scenario predictions. Given this capability, we became interested in exploring the potential of generative AI in …

A2s Uplink Latency Minimization For Wildfire Monitoring Systems Using Mbse And Stochastic Modeling, Luis Giovanni Wang

Master's Theses

Wildfire response depends on how quickly a detection reaches the people who act on it, and the slowest remaining step is often the link that carries an alert from a remote sensing platform to a satellite. This thesis models the latency of that link, the Air-to-Space uplink, for a wildfire-monitoring UAV that carries a Starlink terminal and sends an ALERT packet to a serving Low Earth Orbit satellite. The uplink is difficult to predict because both the UAV and the satellite move, and because the wildfire environment degrades the channel at the moment the data matters most.

The thesis uses …

Investigation Of Process Parameters To Fabricate Tiwmo Refractory Medium Entropy Alloy Via Laser Powder Bed Fusion, Abdullah Al Masum Jabir, Lindsey A. Salazar, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

This paper presents an experimental study on the fabrication of a TiWMo refractory medium-entropy alloy (RMEA) using laser powder bed fusion (PBF-LB/M, commonly known as selective laser melting) from elemental powders as well as successful alloy formation on titanium substrates. The effects of tungsten particle size and process parameters on successful TiWMo RMEA fabrication have been explored using scanning electron microscopy (SEM), x-ray diffraction, hardness measurement and microstructural analysis. Scanning electron microscope (SEM) analysis revealed that the lowest percentage (0.01%) of unmelted tungsten particles was observed at a laser power of 350 W and scanning speed of 250 mm/s, particularly …

Long-Term Mine Planning: A Survey Of Classical, Hybrid And Artificial Intelligence-Based Methods, Nurul Asyikeen Azhar, Aldy Gunawan, Shih-Fen Cheng, Erwin Leonardi

Research Collection School Of Computing and Information Systems

The aim of long-term mine planning (LTMP) is two-fold: to maximize the net present value of profits (NPV) and determine how ores are sequentially processed over the lifetime. This scheduling task is computationally complex as it is rife with variables, constraints, periods, uncertainties, and unique operations. In this paper, we present trends in the literature in the recent decade. One trend is the shift from deterministic toward stochastic problems as they reflect real-world complexities. A complexity of growing concern is also in sustainable mine planning. Another trend is the shift from traditional operational research solutions — relying on exact or …

To Wait Or To Transfer? A Three-Level Optimization Framework For Intermodal Transfer Coordination In First Train Timetabling And Bus Bridging Services Management, Hao Li, Liujiang Kang, Norman Weik, Huijun Sun, Qingying Lai, Zhiguang Cao

Research Collection School Of Computing and Information Systems

This study addresses the integrated optimization of the first train timetabling and bus bridging service design (FTT-BBSD) for morning transfer challenges, two critical but interdependent passenger services in the public transit system. In contrast to most existing studies and conventional approaches, this study explicitly models the influence of passenger path choices and transfer mode selections on FTT-BBSD. Through a novel dual-level network representation that integrates subway and bus systems, we formulate the FTT-BBSD problem as a mixed-integer nonlinear programming model. The model simultaneously determines subway and bus timetables and bridging line deployment to minimize total travel time for all first …

Bridging Images And Language In Radiology: A Comprehensive Prisma Systematic Review Of Transformer Vision-Language Models And Clinical Readiness, Mohammad T. Khasawneh Dr., Sadaf Tabatabaee

Systems Science and Industrial Engineering Student Scholarship

Transformer vision-language models (VLMs) promise end-to-end automation of radiology reporting and related multimodal tasks. However, evidence remains fragmented across datasets, architectures, evaluation practices, and levels of clinical validation, limiting fair comparison and safe translation into practice. Following PRISMA 2020/PRISMA-S, search engines including PubMed, IEEE Xplore, Web of Science, and Google Scholar were systematically searched for peer-reviewed, English-language studies published between 2019 and 2025 that used paired radiology images and free-text reports. Dual reviewers screened records and extracted data using a locked schema covering datasets, modalities, architectures, training objectives, evaluation metrics, and indicators of clinical readiness. Free-text model descriptions were normalized …

Material Costs, Karima Weinman

Masters Theses

This thesis investigates how migration fatality and disappearance data can be reinterpreted through material craft to create a more reflective encounter with information. Working with the Missing Migrants Project's dataset, this project asks how design can communicate dimensions of human loss that conventional data visualization cannot reach.

The work situates contemporary border violence within a longer colonial history, arguing that the logics of surveillance and quantification that structured European imperial expansion persist in the databases that govern mobility in the Mediterranean today.

Terrazzo is a 15th-century Venetian flooring technique built from discarded fragments bound together into a unified surface. This …

Automatic Speed Guidance Method And Simulation Evaluation For Trams At Intersections, Jing Teng, Wencong Tong, Zhongjie Zhang, Xing Yao, Junxian Li

Journal of System Simulation

To address the lack of speed regulation mechanism and the high dispersion of operational time in the current manual driving mode, this paper proposes an automatic speed guidance method for trams at intersections. Considering the speed disturbances caused by potential traffic conflicts at intersections, an initial decision point for safe passage speed at an intersection is established, dividing the operational curve into deterministic segments and disturbance-response segments.To verify the effectiveness of the method, a case study of Songjiang Tram Line 1 is conducted.Driving simulation experiments are performed to obtain manual driving trajectories, and a dynamic trajectory simulation model …

Capacity Market Trading Strategies Of Generators Based On Per-Maddpg Algorithm, Yanbin Li, Zhaolun Pan, Xinyue Ma, Minghao Song, Yujie Hu, Xiaoda Xue

Journal of System Simulation

Considering the issue of how power generators trade off their quantity and price bidding strategies to maximize profits in different capacity market environments, a capacity market bidding equilibrium model is constructed. Recognizing the limitations of traditional solution methods, which rely on the assumption of complete information and have low utilization of historical trading strategy information, a capacity market trading simulation method based on prioritized experience replay multi- agent deep deterministic policy gradient (PER-MADDPG) is proposed. The action space is constructed using quantity bidding strategy and price bidding strategy, and the state space is constructed using historical transaction strategies and winning …