Operations Research, Systems Engineering and Industrial Engineering Commons^™

Algorithms For Combined Regular Synthesis Of Controller Parameters In Control Systems For Dynamic Objects, Khusan Zakirovich Igamberdiev, Latafat Abbas Gizi Gardashova, Yulduz Mukhtarkhodjayevna Abdurakhmanova, Uktam Farkhodovich Mamirov

Technical science and innovation

Nonlinear control system that includes m-dimensional input control signal and extended (n+s) - dimensional state vector, the last s components of which form a vector of unknown parameters θ satisfying a general difference equation is being considered. The quality criterion is determined by the loss function. The optimal control must satisfy the Bellman equation with respect to the optimal loss function. To be defined an approximate solution that preserves an active use of information. For this purpose, the system is linearized in accordance to the nominal trajectory. This problem is seen as incorrectly stated. The values of the preliminary data …

Navigating Perceptions: How Organizational Type And Message Source Affect Willingness To Fly In Automated Air Taxis, Cody James Sweatt

Doctoral Dissertations and Master's Theses

A new era of transportation and business is beginning to emerge. Advanced air mobility (AAM), which uses highly automated aircraft that transport passengers and cargo in the underutilized, low-altitude airspace above and around urban areas, is rapidly becoming a reality (FAA, 2023). These new companies will utilize air taxis, which are automated, electric, vertical takeoff and landing (eVTOL) aircraft and will potentially foster a revolutionary new commerce infrastructure. Unfortunately, it is not currently understood how the credibility of a message source or specific type of organization that owns and operates an automated air taxi company influences a customer’s willingness to …

Mission Engineering Competencies Workshop Report: Roles, Responsibilities, And Skills, James D. Moreland, Jr. (Editor), Thomas Irwin, Robert-Allen Baker

Center for Mission Engineering (CME) Publications

This report summarizes the findings of a two-day Old Dominion University Mission Engineering Workshop involving the U.S. Navy, U.S. Marine Corps, U.S. Air Force, National Aeronautics and Space Administration, the University of New South Wales, and Old Dominion University, focused on defining the roles, competencies, and skills essential to Mission Engineering. It presents a structured competency framework and offers recommendations to guide workforce development, training, and cross-agency collaboration in support of complex, mission-driven systems.

Investigation Of The Effect Of Material Density And Particle Size On Mixed Powder Spreading Behavior In Powder Bed Fusion Process, Alfred Kofi Apianing Achenie

Theses and Dissertations

Powder spreading marks a crucial step in the Laser powder bed fusion process, directly impacting the powder bed uniformity and paving the way for subsequent stages in the process. The laser powder bed fusion process depends heavily on the composition of the metallic powder feedstock. While most existing studies focus on pre-alloyed powders, limited work has explored the use of elemental powder blends as feedstock as used in in-situ alloying. Pre-alloyed powders are often costly, exhibit irregular morphologies and offer limited flexibility in material selection. This study uses Discrete Element Method (DEM) simulations to investigate how variations in material density …

Research On Technology Opportunity Identification By Integrating Technology Attribute Analysis And Competitive Environment Scanning —— A Case Study Of Industrial Robots, Daobin Gao

Journal of Scientific Information Research

[Purpose/significance] Placing technology opportunity identification in the perspective of technology attribute analysis and competitive environment scanning provides intelligence support for enterprises to select technology opportunities and formulate technology competitive strategies in complex and changing market competition environments.

[Method/process] Using patents as the data source, first, the BERTopic model is used to explore potential technical topics, Secondly, starting from the technical attributes, and from both global and local perspectives, we propose indicators of technical importance and technical attention, and use their cross screening to select candidate sets of technical opportunities, Finally, a market competition intensity index that takes into account market …

An Exponential Cone Integer Programming And Piece-Wise Linear Approximation Approach For 0-1 Fractional Programming, Hoang Giang Pham, Thuy Anh Ta, Tien Mai

Research Collection School Of Computing and Information Systems

We study a class of binary fractional programs commonly encountered in important application domains such as assortment optimization and facility location. These problems are known to be NP-hard to approximate within any constant factor, and existing solution approaches typically rely on mixed-integer linear programming or second-order cone programming reformulations. These methods often utilize linearization techniques (e.g., big-M or McCormick inequalities), which can result in weak continuous relaxations. In this work, we propose a novel approach based on an exponential cone reformulation combined with piecewise linear approximation. This allows the problem to be solved efficiently using standard cutting-plane or branch-and-cut procedures. …

Comparative Analysis Of The Efficiency Of Reverse Osmosis And Hydroxyapatite For Fluoride Removal In Water: A Case Of Auwsa, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

Water treatment technology selection depends on contaminant type and budget. Fluoride removal from water is particularly challenging, requiring non-conventional treatment technologies (Radwan, 2023). Several regions in Tanzania, including Arusha City, are affected by fluoride contamination. With a population of 617,631 (Census, 2022), only 117,763 people currently have access to clean water supplied by AUWSA. This study aimed to compare the efficiency of Reverse Osmosis (RO) and Hydroxyapatite (HAP) in fluoride removal as a strategy to address water quality and supply challenges. Experiments were conducted using 6 m³ of raw water with fluoride concentrations ranging from 5.1 mg/L to 6.83 mg/L, …

The Royal Academy Of Engineering, Uk And The Enriching Of Engineering Education Training And Practice Programme In Sub-Saharan Africa, Bavo B. Nyichomba

Tanzania Journal of Engineering and Technology (TJET)

This paper elucidates initiatives taken by the Royal Academy of Engineering, UK, to overcome barriers in education and training in Sub-Sahara African higher learning engineering institutions. The said barriers include mismatches of curriculum, ineffectual teaching and learning and little exposure of academic staff to engineering practice. In order to overcome such barriers, the Royal Academy of Engineering established the two programmes in the region. The first one, Enriching Engineering Education Programme (EEEP) from 2014/15 to 2015/16 where the University of Dar es Salaam coordinated this programme as a hub for East African universities namely; Makerere University (Uganda), Moi University (Kenya), …

Performance Dynamics Of Activated Carbon-Methanol Pair In Adsorption Refrigeration Systems, Ibrahim J. Mwasubila

Tanzania Journal of Engineering and Technology (TJET)

Adsorption refrigeration systems have shown potential for addressing the adverse effects of traditional compressor-based refrigeration systems. Adsorption refrigeration systems that utilise activated carbon and methanol demonstrate good performance, especially at temperatures below 0 °C. This combination significantly improves the cooling performance of the system, making it a dependable option for freezing applications. Despite having the potential to meet cooling demand and be eco-friendly, the adsorption refrigeration system has several drawbacks that hinder its commercialisation. This paper discusses the properties of the activated carbon methanol pair in the adsorption refrigeration system. The focus is on the desorption temperature, thermal stress, repeatability …

A Smart System For Detecting Anatomic And Histological Symptoms Of Diseased Agricultural Plants, Rustam Baratov, Himola Sunnatillayeva, Alimardon Mamatovich Mustafoqulov

Chemical Technology, Control and Management

This study describes a novel agricultural plant disease detecting smart system, capable of handling measured plant body parameters and images received by high resolution camera at the same time. The proposed plant disease detection method is based on evaluation of the signals received by measured and controlled plant body physical parameters like resistance, temperature and capacitance of the plant stem and image processing. An analogue plant model based on an electrical circuit with distributed parameters was developed. In addition, in the article the block diagram of the smart system for the early detection of plant diseases, the circuit diagram, its …

Strategies For Overcoming Product Certification Challenges Faced By Food Manufacturing Small And Medium Enterprises In Tanzania, Peresi M. Bulemo

Tanzania Journal of Engineering and Technology (TJET)

Small and Medium-sized Enterprises (SMEs) in Tanzania face significant regulatory challenges within bureaucratic, costly, and centralized environments. These challenges contribute to an increase in unregistered enterprises and substandard products in the market. This study aimed to address the challenges SMEs encounter in obtaining product certification to improve their product quality and market competitiveness. A mixed-methods approach was employed, combining qualitative and quantitative research through surveys, interviews, and document analysis, with respondents from the Tanzania Bureau of Standards (TBS), Small Industries Development Organization (SIDO), and SMEs in the food manufacturing sector. Data analysis was conducted using SPSS and JASP. Findings revealed …

Prospects Of Clean Cooking Energy In Africa - Transition Pathways And Implications, Joseph H. Kihedu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Despite abundant renewable energy resources, African countries still suffer from energy poverty, particularly in cooking. Up to 2022, about 74% of the African population had no access to clean cooking energy. With focus to Sub-Saharan African population, 90% has no access to clean cooking energy which decrease by 7% when kerosene is included. Traditional cooking, which involves the use of charcoal and firewood, is associated with health problems, environmental degradation, socioeconomic issues, and gender inequality. Transitioning to clean cooking energy not only promises significant health benefits but also offers opportunities for sustainable economic development and environmental preservation. In this study, …

Towards Metrology 4.0 In Developing Countries’ Manufacturing Industries, Jailos Nzumile

Tanzania Journal of Engineering and Technology (TJET)

A systematic literature review was conducted to unveil the status of the digital transformation of metrology in developing countries, as they are lagging in utilising fourth industrial revolution (IR4.0) technologies to transform manufacturing industries. A PRISMA technique was employed using various keywords to identify, screen, and select the relevant literature. Forty publications were selected for the review, mainly discussing IR 4.0 technologies in metrological operations. The results indicate that the digital transformation of metrology has yet to be initiated in developing countries. However, the employment of IR4.0 technologies in advancing metrological operations in manufacturing industries is mostly discussed in the …

Comprehensive Review Of Sensible Thermal Storage Systems For Cooking Applications, Anna K. Shariishoy

Tanzania Journal of Engineering and Technology (TJET)

This paper reviewed the sensible thermal storage systems specifically designed for cooking applications. The review focuses on the characteristics of storage materials, their practical applications, and the overall performance of the systems. The review consolidated an array of experimental and numerical research published across various sources such as journals, conferences, books, online resources, and professional reports. A systematic review is used to reach the conclusion of this paper. Significant findings from this study include the wide range of storage capacities attained from small-scale systems that can store ~1–5 MJ of energy for a single meal to bigger systems that can …

Fuzzy Logic-Based Decision Support System For Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

In the context of Industry 4.0, predictive maintenance enhances operational efficiency by optimizing processes, minimizing downtime, and improving cost-effectiveness. However, implementing predictive maintenance requires a systematic approach due to its complexity. This study collected expert input from 15 food and beverage manufacturing industries located in Dar es Salaam, Tanzania, using a purposive sampling technique. Six representatives were selected from each industry, and their opinions were analyzed using MATLAB 7.6 through a fuzzy logic inference system. The analysis focused on key factors influencing Industry 4.0 technology adoption for predictive maintenance, including adoption intention (strategic decision, equipment data, perceived benefit) and perceived …

Effects Of Cutting Conditions On Tool Temperature And Material Removal Rate In Turning Operations, Simon I. Marandu

Tanzania Journal of Engineering and Technology (TJET)

Cutting conditions in manufacturing processes have effects on tool temperature and material removal rate. The objective of this study was to investigate the effects of cutting conditions namely spindle speed, feed rate, depth of cut and tool nose radius on tool temperature and material removal rate in turning operations. A total of 81 experiments were conducted to measure tool temperature and material removal rate in order to determine the effects of cutting conditions on tool temperature and material removal rate using ANOVA and regression analysis. The results show that tool nose radius, depth of cut, and spindle speed are significant …

Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Clean cooking and efficient cooling in developing countries have recently become areas of great focus. Further, the environmental impact of flooding in high-capacity hydroelectric plants has become a major concern. As a result, there is growing emphasis on developing sustainable and decentralized energy solutions, focusing on the potential of micro-hydro systems, especially in rural and remote areas. Although there are several alternative energy generation methods, their application is not straightforward. One of the latest technologies under research is using pumps as turbines coupled to an induction generator. This paper explores through a rigorous experimental approach the possibility of using a …

Mechanical Properties Of Pineapple Braided Fabric Reinforced Epoxy Matrix Composite Fabricated Via Vacuum-Assisted Resin Infusion Moulding, Bwire S. Ndazi

Tanzania Journal of Engineering and Technology (TJET)

Fibres and fabrics obtained from lignocellulosic materials have attracted attention as reinforcements in polymer composites due to their competitive mechanical and ecological benefits. While the potential of randomly oriented pineapple leaves fibres (PALF) in composites have explored in previous studies, the mechanical behaviour of braided PALF fabric composites fabricated via vacuum-assisted resin infusion moulding (VARIM) remains relatively unexplored. In this study the tensile, compression and flexural strengths of epoxy-based composite containing 40 vol.% braided pineapple fabrics, fabricated using VARIM, for load carrying applications were investigated. The results revealed that the three-layered unbleached pineapple braided fabric composites exhibited a tensile strength …

The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Vehicle mobility internal factors are influenced by the performance state of the road surface quality, governor, engine, gear train, differential unit and mobility unit. Studies on vehicular mobility models exist for off-road external factors but absent on on-road internal factors. The on-road internal factors model describes the vehicular mobility performance as a function of internal factors. In the current undertaking, results are generated by the determination of mobility performance characteristics with the application of 2nd Order Ordinary Differential Equations and using Laplace operator with MATLAB Software simulation. The effect of road surface against the time taken varies accordingly. At a …

Towards Effective Academia-Industry Collaborations: The Case Of Higher Learning Institutions In Tanzania, Fatuma S. Ikuja

Tanzania Journal of Engineering and Technology (TJET)

Industries are the main consumers of products from higher learning institutions (HLIs); graduates for employment and research outputs for socio-economic development. Research outputs from HLIs are commercialized as services or products facilitated by academia-industry collaborations. The collaborations are expected to address mismatch between labour market needs and HLIs’ products, which has resulted in graduates’ employability challenges. Despite their importance, effective academia-industry collaborations remain challenging. This study explores the effectiveness of Academia-Industry collaborations established by HLIs in implementing the Higher Education Economic Transformation (HEET) project (2021-2026) in Tanzania. One of the project objectives is to build functional linkages between industry and …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Thermal Energy Storage System Using Silica Sand As Heat Storage Medium: Simulation Of Geita Gold Mine, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

Currently, Geita Gold Mine (GGM) relies on electrical energy from the national grid and diesel power generators to generate electricity for various industrial applications. The plant currently spends a large amount of money on generating power from diesel generators. The total annual cost of power generation from diesel generators including lubricants is USD 56,057,990. The total annual fuel cost is USD 53,531,805 for a total of 54,985,473 liters per year. Most of the power generated by the generators is consumed in the industrial thermal processes. Thermal energy applications at the plant are thermal drying of the extracted ores to remove …

Wet Gas Metering Performance Using Conventional Flow Measurement Devices, Vitali Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The demand for and production of natural wet gas from wells has significantly risen in recent years. Although natural gas liquids hold substantial value in the oil and gas market, their presence in wet gas adversely affects gas metering, leading to overreading during measurement. A comprehensive study has been undertaken to formulate and enhance correlations for rectifying overreading in wet gas metering. Nevertheless, most current correlations are designed for horizontal configurations of traditional meters. Mitigating this constraint is crucial to consider the impact of gravity on pressure loss in vertically oriented systems. This study seeks to evaluate the efficacy of …

Fuzzy-Ahp Based Decision Support System For The Selection Of Optimal Maintenance Strategy For Meter Gauge Railway Infrastructure: A Review, Hamisi J. Maulid

Tanzania Journal of Engineering and Technology (TJET)

There are many uncertainties and complexities associated with maintaining Meter Gauge Railway (MGR) infrastructure, which calls for a methodical approach to decision-making. The development and application of a fuzzy-AHP-based decision support system (DSS) to select the optimal maintenance strategy for the MGR are presented in this study. The review covers research from 2013 to 2023 and focusses on the use of Multi-Criteria Decision Making (MCDM) and Fuzzy Analytic Hierarchy Process (Fuzzy-AHP) techniques in railway infrastructure maintenance. To manage the inherent uncertainties and subjective judgements involved in maintenance decision-making, the Fuzzy-AHP methodology combines fuzzy logic with the Analytic Hierarchy Process (AHP). …

Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk, Karina S. Motani

Tanzania Journal of Engineering and Technology (TJET)

The Mozambican agro-industrial sector relies heavily on various crops, with maize being the most significant. During processing, substantial waste is generated, which is often discarded as organic matter or burned, contributing to environmental pollution and the loss of potential energy resources. This study evaluated the thermal and emission performance of briquettes made from carbonized corn cob (CCC) and carbonized corn husk (CCH), using cashew nut skin as a binder for clean cooking applications. The briquettes were assessed against firewood and charcoal as control fuels, focusing on several energy performance parameters: water boiling time (WBT), combustion index (CI), thermal efficiency (TE), …

Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania, Joseph H. Kihedu

Tanzania Journal of Engineering and Technology (TJET)

This review paper explores the transformative potential of Gas-to- Liquids (GTL) technology for harnessing Tanzania's vast natural gas resources. With significant discoveries of natural gas reserves totalling up to 57 Tcf in fields such as Songosongo, Mnazi Bay, Block 1, 2, 3 and 4. Tanzania is positioned to leverage GTL technology to convert these resources into high-value liquid fuels like gasoline, diesel and naphtha. Review of GTL process, its products and applications has been done. By analysing successful GTL projects globally and drawing lessons applicable to Tanzania, this paper provides strategic recommendations for policymakers and stakeholders to foster GTL development. …

Predicting The Influence Of Aggregate Size And Distribution On Cementitious Concrete Properties: A Review, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

Cement concrete has been in use for centuries as one of the primary construction materials. Its demand in the construction industry is expected to continue for several centuries before the full development of alternative products. However, one of the main areas of research interest is understanding how its constituents can be tailored to make its properties predictable to reduce risks associated with structural failures, reconstruction and reduced durability. These hindrances associated with cementitious concrete result from several attributes, including constituent material characteristics, mixing ratios and workmanship. Understanding the predictability of cement concrete properties requires computer modelling tools to provide reliable …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Root Cause Analysis Of Performance Degradation For An Xyz Thermal Power Plant In Tanzania, Simon I. Marandu

Tanzania Journal of Engineering and Technology (TJET)

Thermal power plants in Tanzania have been experiencing performance degradation, typically arising from component and subsystem failures, which contribute to power system instability and unreliability. This paper presents a case study of the root causes of performance degradation of an XYZ thermal power plant. The study was conducted by reviewing plant documentations, including maintenance and operational data logbooks, and by standardising the approach through the adoption of ISO 14224:2016 for maintenance and reliability data exchange. Data evaluation was carried out using principal component analysis and scree plot analytical techniques to enhance the depth and accuracy of root cause identification. Additionally, …

Assessment Of Digital Solutions For Conformity Assessment Of Legally Controlled Measuring Instruments In Tanzania, Faraja Nyoni

Tanzania Journal of Engineering and Technology (TJET)

The advent of state-of-the-art digital technologies since 2011 has led to the digital transformation of legal metrology practices to ensure the trustworthiness of software-controlled measuring instruments globally. Despite the digital transformation in legal metrological practices, the conformity assessment of legally controlled measuring instruments is manually done (i.e., paper-based) in Tanzania. The paper-based conformity assessment of legally controlled measuring instruments is prone to error and lacks efficiency and effectiveness. This study aimed to assess digital solutions for improving conformity assessment through a comprehensive survey conducted across various regions in Tanzania, targeting a stratified sample of 51 respondents from organizations involved in …