Open Access. Powered by Scholars. Published by Universities.®
Operations Research, Systems Engineering and Industrial Engineering Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Physical Sciences and Mathematics (346)
- Computer Sciences (308)
- Artificial Intelligence and Robotics (267)
- Computer Engineering (264)
- Systems Science (257)
-
- Numerical Analysis and Scientific Computing (251)
- Industrial Engineering (132)
- Operational Research (94)
- Other Operations Research, Systems Engineering and Industrial Engineering (63)
- Electrical and Computer Engineering (57)
- Systems Engineering (54)
- Chemical Engineering (52)
- Mechanical Engineering (51)
- Business (46)
- Industrial Technology (41)
- Process Control and Systems (41)
- Social and Behavioral Sciences (38)
- Controls and Control Theory (31)
- Risk Analysis (30)
- Complex Fluids (27)
- Manufacturing (24)
- Civil and Environmental Engineering (23)
- Medicine and Health Sciences (22)
- Data Science (18)
- Public Affairs, Public Policy and Public Administration (18)
- Applied Mathematics (17)
- Operations and Supply Chain Management (17)
- Materials Science and Engineering (16)
- Institution
-
- China Simulation Federation (242)
- Air Force Institute of Technology (60)
- University of Dar es Salaam (33)
- Tashkent State Technical University (31)
- Old Dominion University (27)
-
- Singapore Management University (26)
- Missouri University of Science and Technology (19)
- University of Arkansas, Fayetteville (18)
- Chulalongkorn University (17)
- Universitas Indonesia (14)
- University of Texas Rio Grande Valley (14)
- Clemson University (11)
- East Texas A&M University (10)
- West Virginia University (10)
- California Polytechnic State University, San Luis Obispo (8)
- Louisiana State University (8)
- Portland State University (7)
- California State University, San Bernardino (6)
- Harrisburg University of Science and Technology (6)
- Kennesaw State University (6)
- Purdue University (6)
- University of Texas at El Paso (6)
- Institut de Recherche Robert-Sauvé en santé et en sécurité du travail (5)
- New Jersey Institute of Technology (5)
- City University of New York (CUNY) (4)
- Association of Arab Universities (3)
- Embry-Riddle Aeronautical University (3)
- University of Louisville (3)
- University of South Florida (3)
- Bucknell University (2)
- Keyword
-
- Deep learning (20)
- Machine learning (20)
- Path planning (20)
- Digital twin (13)
- Reinforcement learning (13)
-
- Optimization (12)
- Multi-objective optimization (11)
- Uncertainty (11)
- Simulation (8)
- UAV (8)
- DRL (7)
- Additive manufacturing (6)
- Artificial intelligence (6)
- Engineering (6)
- Genetic algorithm (6)
- Mobile robot (6)
- Modeling (6)
- Neural networks (6)
- Object detection (6)
- A* algorithm (5)
- COVID-19 (5)
- Clustering (5)
- Complex systems (5)
- Deep reinforcement learning (5)
- Linear programming (5)
- Neural network (5)
- Students (5)
- SysML (5)
- Systems engineering (5)
- Attention mechanism (4)
- Publication
-
- Journal of System Simulation (242)
- Theses and Dissertations (67)
- Tanzania Journal of Engineering and Technology (TJET) (33)
- Chemical Technology, Control and Management (31)
- Research Collection School Of Computing and Information Systems (24)
-
- Chulalongkorn University Theses and Dissertations (Chula ETD) (17)
- Engineering Management & Systems Engineering Faculty Publications (14)
- Faculty Publications (14)
- Engineering Management and Systems Engineering Faculty Research & Creative Works (13)
- Manufacturing & Industrial Engineering Faculty Publications (12)
- Graduate Theses, Dissertations, and Problem Reports (ETD) (10)
- Journal of Materials Exploration and Findings (10)
- Engineering Management & Systems Engineering Theses & Dissertations (8)
- Engineering and Technology Management Faculty Publications and Presentations (7)
- All Theses (6)
- Data Science Undergraduate Honors Theses (6)
- Graduate Theses and Dissertations (6)
- Master's Theses (6)
- Open Access Theses & Dissertations (6)
- All Dissertations (5)
- Harrisburg University Dissertations and Theses (5)
- Industrial Engineering Undergraduate Honors Theses (5)
- Journal of International Technology and Information Management (5)
- LSU Doctoral Dissertations (5)
- Theses (4)
- Dissertations (3)
- Dissertations, Theses, and Capstone Projects (3)
- Electronic Theses and Dissertations (3)
- LSU Master's Theses (3)
- Purdue University Libraries Open Access Publishing Fund (3)
- Publication Type
Articles 511 - 540 of 664
Full-Text Articles in Operations Research, Systems Engineering and Industrial Engineering
Strategy For Predictive Control Of The Rectification Process Based On A Model Controller With A Given Forecast, Ildar Rafkatovich Sultanov
Strategy For Predictive Control Of The Rectification Process Based On A Model Controller With A Given Forecast, Ildar Rafkatovich Sultanov
Chemical Technology, Control and Management
A method is being developed to optimize the generated controls for the multicomponent distillation process with prediction, based on predictive data with a moving horizon. The difference between this method and the classical modeling approach, in which the percentage of the degree of opening of valves installed on the output streams of the column is used as control actions, is that control occurs on the feedback principle. The proposed method is based on the use of a dynamic process model to optimize control actions in real time in order to achieve certain production targets. The essence of the MPC approach …
A Neural Network Model For Monitoring And Forecasting The Process Of Storing Oilseeds, N.A. Kabulov
A Neural Network Model For Monitoring And Forecasting The Process Of Storing Oilseeds, N.A. Kabulov
Chemical Technology, Control and Management
The paper presents the results of research on the control, forecasting and management of the storage process of oilseeds. Vegetable oil production and energy consumption are two important factors of oilseed storage systems. The first ones should meet the needs of the population quantitatively and qualitatively. As a result, in order to properly control these two important aspects, it is necessary to maintain an appropriate microclimatic environment using a computational decision support system (DSS) that is able to adapt to changes in environmental characteristics. The multilayer perceptron neural network (MLP-NN) was developed to simulate the temperature and relative humidity profiles …
Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan
Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan
Theses and Dissertations
Sustainable packaging has become an essential part of business decisions and corporate directions. With the rise of environmental damages due to improper waste management and unsustainable practices, businesses have a major responsibility to analyze their products’ life cycles and redesign them with sustainability in mind. Applying sustainable packaging could save companies large amounts of resources, therefore cutting costs, while also achieving the legal and social duty as a corporation towards society and the environment. Many developing countries, with specific focus on Egypt, have recently focused on legislative and corporate decisions in order to encourage more sustainable practices. Egypt’s new Waste …
Evaluation Of Environmental Management System For Small And Medium Enterprises In Dar Es Salaam, Tanzania, Juma M. Matindana
Evaluation Of Environmental Management System For Small And Medium Enterprises In Dar Es Salaam, Tanzania, Juma M. Matindana
Tanzania Journal of Engineering and Technology (TJET)
A system that manages environmental issues of Small and Medium Enterprises (SMEs) from the time of acquisition of raw materials up to disposal of the product is not well clear, especially in Tanzania. Most of the studies have been conducted in the field of environment management but few of them address the evaluation of the management of SMEs activities with respect to the environment. Although the nature of activities of SMEs has little noticeable environmental implications at the individual level but the impact is large due to diversification and labour intensity of these SMEs. SMEs employ about 20% of the …
A Two-Stage Based Life Cycle And Principal Component Analysis For Decision Support Of Potential Municipal Solid Wastes Management Scenarios, Case Study Dar Es Salaam, Tanzania, Edwin Richard Ndibalema Dr
A Two-Stage Based Life Cycle And Principal Component Analysis For Decision Support Of Potential Municipal Solid Wastes Management Scenarios, Case Study Dar Es Salaam, Tanzania, Edwin Richard Ndibalema Dr
Tanzania Journal of Engineering and Technology (TJET)
In most of the urban areas of Tanzania, poor and inadequate solid waste management is a growing environmental and public health concern. Despite an array of solid waste management options, choosing an appropriate one remains a challenge. This study applied a novel two-stage-based approach to assess the environmental impacts and sustainability performance of the 27 scenarios for municipal solid wastes (MSW) management of Dar es Salaam City, Tanzania. In the first stage, the study utilized a life cycle analysis (LCA) to quantify the environmental impacts of MSW scenarios. In the second stage, the study used the principal component analysis (PCA) …
Augmented Finite Control Set Mpc Design Technique For Wide Speed Range Control Of Permanent Magnet Synchronous Motor Drives, Francis Mwasilu
Augmented Finite Control Set Mpc Design Technique For Wide Speed Range Control Of Permanent Magnet Synchronous Motor Drives, Francis Mwasilu
Tanzania Journal of Engineering and Technology (TJET)
The effective motion control task is highly influencing the final drive performance in wide-range motor drives applications such as electric vehicles (EVs), washing machines, compressors, elevators and lathe machines. Recently, permanent magnet synchronous motor (PMSM) drive has been widely employed in these applications to achieve desired performances such as high efficiency, high torque requirements with minimum size “occupancy”. The PMSM drive features combining with these modern drive applications are highly nonlinear and the desired operation requirements demand high-performance control schemes with fast system response and robustness features. Linear control schemes are usually implemented to drive the PMSM that entail trade …
Nature Of Occupational Incidents Among Roofing Contractors: A Data Mining Approach, Ikechukwu Sylvester Onuchukwu, Pouya Gholizadeh, Genian Liko, Behzad Esmaeili
Nature Of Occupational Incidents Among Roofing Contractors: A Data Mining Approach, Ikechukwu Sylvester Onuchukwu, Pouya Gholizadeh, Genian Liko, Behzad Esmaeili
Purdue University Libraries Open Access Publishing Fund
Given that roofing contractors in the construction industry have the highest fatality rate among specialty contractors, understanding the root cause of incidents among roofers is critical for improving safety outcomes. This study applied frequency analysis and decision tree data-mining techniques to analyze roofers’ fatal and non-fatal accident reports. The frequency analysis yielded insights into the leading cause of accidents, with fall to a lower level (83%) being the highest, followed by incidence sources relating to structures and surfaces (56%). The most common injuries experienced by roofing contractors were fractures (49%) and concussions (15%), especially for events occurring in residential buildings, …
Cost Estimation Proxy Models For Economic Evaluations In Petroleum Projects: A Case Study From The Onshore Gas Field In The Southern Coastal Tanzania Basin, Fulmence Kaborogo
Cost Estimation Proxy Models For Economic Evaluations In Petroleum Projects: A Case Study From The Onshore Gas Field In The Southern Coastal Tanzania Basin, Fulmence Kaborogo
Tanzania Journal of Engineering and Technology (TJET)
Petroleum economic evaluation involves estimating revenues from forecasted production profiles and field costs including capital expenditures (CAPEX), drilling expenses (DRILLEX), and operating expenses (OPEX). The existing cost-estimating tool requires several inputs making it time-intensive and difficult to use with few data during the early stages of projects. Majority of the previously developed time saving cost estimations proxy models rely on unrealistic assumptions that include uniform operational costs for different fields with a different number of wells, casings, and drilled depths. This work focused at developing proxy models that consider the variability of the development costs with different parameters. The developed …
Efficiency Optimization Method For Data Sampling In Power Grid Topology Scheduling Simulation, Yingying Zhao, Pusen Dong, Tianchen Zhu, Fan Li, Yun Su, Zhenying Tai, Qingyun Sun, Hang Fan
Efficiency Optimization Method For Data Sampling In Power Grid Topology Scheduling Simulation, Yingying Zhao, Pusen Dong, Tianchen Zhu, Fan Li, Yun Su, Zhenying Tai, Qingyun Sun, Hang Fan
Journal of System Simulation
Abstract: To address the large simulation computational workload and low simulation speed caused by the scale and complexity of the new power system, a simulation acceleration method for topology scheduling based on the distributed and quantization mechanisms is proposed. The parallelization of topology scheduling models is used to increase the scale of data simulation sampling in unit time. The introduced quantization operators accelerate the computation speed of the topology scheduling model operators, reduces the time cost of the every single simulation. Case studies confirm the effectiveness of the topology simulation acceleration, in which the available transfer capacity of the simulated …
Runoff Intelligent Prediction Method Based On Broad-Deep Fusion Time-Frequency Analysis, Ying Han, Lehao Wang, Shumei Wang, Xiang Zhang, Xingxing Luo
Runoff Intelligent Prediction Method Based On Broad-Deep Fusion Time-Frequency Analysis, Ying Han, Lehao Wang, Shumei Wang, Xiang Zhang, Xingxing Luo
Journal of System Simulation
Abstract: Broad learning system(BLS) is introduced to tackle the existed disadvantage that LSTM-based runoff prediction model is easy to fall into local optimization. To reduce the influence of noise on the prediction results, the variational mode decomposition (VMD) is adopted to transform the onedimensional time-domain runoff signal to the two-dimensional time-frequency plane. The runoff prediction model based on VMD-LSTM-BLS is proposed. The simulation results demonstrate that the prediction accuracy of the new model is more significantly improved compared with the baseline model and the existing LSTM-based runoff prediction model.
Simulation Platform Of Agv System Scheduling Algorithms In Uncertain Environment, Zhihao Shi, Haihui Shen
Simulation Platform Of Agv System Scheduling Algorithms In Uncertain Environment, Zhihao Shi, Haihui Shen
Journal of System Simulation
Abstract: As a complete automated guided vehicle(AGV) system scheduling algorithm, it must include conflict-handling strategy, together with common dispatching strategy and routing algorithm. However, due to the uncertainty, characteristics of such scheduling algorithm are difficult to be analyzed theoretically, and the relevant study is lacking. An AGV system simulation platform based on the discreteevent simulation technique is designed and developed, which can flexibly set the scheduling problem, choose the dispatching strategy, routing algorithm, and conflict-handling strategy for the scheduling algorithm, to run the simulation. The platform has a visual interface, from which the running status of AGVs and the performance …
Research On Motion Planning Of Hexapod Robot Based On Drl And Free Gait, Xinpeng Wang, Huiqiao Fu, Guizhou Deng, Kaiqiang Tang, Chunlin Chen, Canghao Liu
Research On Motion Planning Of Hexapod Robot Based On Drl And Free Gait, Xinpeng Wang, Huiqiao Fu, Guizhou Deng, Kaiqiang Tang, Chunlin Chen, Canghao Liu
Journal of System Simulation
Abstract: To improve the passability and the motion performance of the hexapod robot in the unstructured environment, a multi-contact motion planning algorithm based on DRL and free gait planner is proposed. Firstly, the free gait planner obtains the reachable footholds under the target state and outputs the optimal gait sequence. The center of mass motion policy of the hexapod robot in the randomly generated plum blossom pile environment is obtained by using deep reinforcement learning training. To ensure the reachability between adjacent states of the robot in motion, the state transition feasibility model is used to judge the state transition …
Robust Predictive Control Of Nonplanar Fully-Actuated Uavs, Yun Ma, Yuan Wang, Meng Li, Peng Wang, Yanling Tang
Robust Predictive Control Of Nonplanar Fully-Actuated Uavs, Yun Ma, Yuan Wang, Meng Li, Peng Wang, Yanling Tang
Journal of System Simulation
Abstract: Targeting the problem that nonplanar fully-actuated unmanned aerial vehicles (UAVs) are susceptible to external winds and unmodeled dynamics, the predictive control system with good robustness is designed. A nonlinear motion model with six degrees of freedom is established through the Newton-Euler approach. A linear extended state observer is designed to estimate the state variables by transforming the system affected by matched and unmatched disturbances into an equivalent system only affected by the matched disturbances. A predictive controller is designed for the equivalent system to reduce the output oscillation and input surging and a disturbance compensator is also designed to …
Fault Detection Based On Sliding Window And Multiblock Convolutional Autoencoders, Jianpeng Mou, Weili Xiong
Fault Detection Based On Sliding Window And Multiblock Convolutional Autoencoders, Jianpeng Mou, Weili Xiong
Journal of System Simulation
Abstract: In order to further improve the fault detection performance and fully mine the timing and hidden feature information, a fault detection method based on convolutional auto encoder is proposed. On the basis of modeling the original information set, the modeling of cumulative information and rate of change information is added to enhance the mining of implicit information; The three reconstructed information sets are sampled by sliding windows, and time series feature extraction and modeling are performed based on convolutional auto encoders. Bayesian fusion of the decision results of the convolutional auto encoder is performed to obtain the statistics, and …
Research On Vehicle Detection Method Based On Improved Yolox-S, Xiliu Zhang, Xiaoling Zhang, Minjun He
Research On Vehicle Detection Method Based On Improved Yolox-S, Xiliu Zhang, Xiaoling Zhang, Minjun He
Journal of System Simulation
Abstract: A improved vehicle detection model based on multi-scale feature fusion of YOLOX network is proposed to solve the problem of missing and false detection of small vehicle targets. Ghost-cross stage partial(CSP) based on the depth separable convolution is designed to replace part of cross stage partial in network to speed up the speed of detection. The max pooling mode of model is improved to Softpool mode, and coordinate attention mechanism is introduced to enhance the feature expression of target to be detected and to optimize the problem of target missing detection. Focal Loss is selected as the confidence loss …
Reconnaissance Mission Planning Method For Air-Ground Heterogeneous Unmanned Systems, Guohui Zhang, Ya'nan Zhang, Ang Gao, Aoyu Xu
Reconnaissance Mission Planning Method For Air-Ground Heterogeneous Unmanned Systems, Guohui Zhang, Ya'nan Zhang, Ang Gao, Aoyu Xu
Journal of System Simulation
Abstract: Compared with the air-based homogeneous unmanned system, the motion capabilities, resource payloads, and combat scenes in the air-ground heterogeneous unmanned system increase the number of constraint conditions and significantly increase the computational complexity of the solution model. The modeling of collaborative combat missions and the efficient solution of large-scale problems are the key issues. With the time, path cost, and reconnaissance benefit as the objective functions, considering the constraints such as the endurance of unmanned platforms, a multi-objective programming model for the reconnaissance missions of an air-ground heterogeneous unmanned system is constructed. Aiming at the urban combat environments with …
Design And Application Of Hardware-In-The-Loop Simulation System For Infrared Imaging Guide Missile Test And Evaluation, Jianbin Dou, Xiaobing Wang, Hongjian Yang, Yulong Gao
Design And Application Of Hardware-In-The-Loop Simulation System For Infrared Imaging Guide Missile Test And Evaluation, Jianbin Dou, Xiaobing Wang, Hongjian Yang, Yulong Gao
Journal of System Simulation
Abstract: The characteristics of the army's conventional infrared imaging guide missile hardware-in-theloop simulation system used for test and evaluation is analyzed, and a system that can meet the test and evaluation requirement of infrared imaging guide missile is designed. The key technologies such as universal system design, rapid iterative development design of heterogeneous communication data, high radiation infrared interference dual channel coupling simulation, high-precision timing and synchronization, generation of complex battlefield environment are solved. The application of the system is verified on the typical anti-tank missile and helicopter borne missile tests. The system can be used for infrared imaging guide …
A Simplification Method Of Large-Scale Unit Commitment Model Based On Boundary Method, Yanping Xu, Mingxin Zhao, Xiaohui Qin, Keyou He, Xiaohan Wu, Pei Zhang
A Simplification Method Of Large-Scale Unit Commitment Model Based On Boundary Method, Yanping Xu, Mingxin Zhao, Xiaohui Qin, Keyou He, Xiaohan Wu, Pei Zhang
Journal of System Simulation
Abstract: As the scale of power grid expands, in the market environment, the variables and constraints in the security-constrained unit commitment (SCUC) model considering power grid security constraints increase significantly and the solvability of the model reduces. When the model scale is too large, even the existing commercial solvers cannot solve it. Aiming at the model rapid solving, from the perspective of reducing the number of model constraints, a linear constraint simplification method based on the boundary method is proposed. The proposed method can effectively reduce the model's size by eliminating the redundant linear constraints. The IEEE-39, WECC 179 and …
Research Advances On Electric Vehicle Routing Problem Models And Algorithms, Helin Zhuang, Xiaoyun Xia, Kangshun Li, Zefeng Chen, Xianchao Zhang
Research Advances On Electric Vehicle Routing Problem Models And Algorithms, Helin Zhuang, Xiaoyun Xia, Kangshun Li, Zefeng Chen, Xianchao Zhang
Journal of System Simulation
Abstract: The development of electric vehicle provides an alternative to conventional fuel vehicles for logistics companies. Using electric vehicles has the merits of less pollution and low noise, but the characteristics of limited cruising range and limited number of charging stations are new challenges. Electric vehicle routing problems(EVRPs) have been widely used in transportation, logistics and other fields, and have received much attention. A comprehensive survey of EVRP and its many variants are presented and the respective backgrounds and applicable conditions are analyzed. The solving approaches of EVRPs are categorized, the strengths and weaknesses of each algorithm are analyzed, and …
Optimal Scheduling Strategy Of Virtual Power Plant With Carbon Emission And Carbon Penalty Considering Uncertainty Of Wind Power And Photovoltaic Power, Jijun Shui, Daogang Peng, Yankan Song, Qiang Zhou
Optimal Scheduling Strategy Of Virtual Power Plant With Carbon Emission And Carbon Penalty Considering Uncertainty Of Wind Power And Photovoltaic Power, Jijun Shui, Daogang Peng, Yankan Song, Qiang Zhou
Journal of System Simulation
Abstract: To better meet the development needs of China's new power system, an optimal scheduling strategy of virtual power plant(VPP) with carbon emission and carbon penalty considering the uncertainty of wind power and photovoltaic power is proposed. The mathematical description of photovoltaic(PV), wind turbine(WT), combined heat and power(CHP) unit and energy storage system (ESS) is carried out, and a wind-solar output model considering the uncertainty is established. The scenario generation and reduction method is used to generate the typical scenario. To maximize the overall operation benefit of VPP, considering carbon emission cost and carbon penalty, an optimal scheduling model of …
Optimal Dispatch Of Microgrid Clusters Considering Energy Storage Life And Communication Failures, Jianfang Jiao, Anjie Wang, Guang Wang, Jiale Xie
Optimal Dispatch Of Microgrid Clusters Considering Energy Storage Life And Communication Failures, Jianfang Jiao, Anjie Wang, Guang Wang, Jiale Xie
Journal of System Simulation
Abstract: To ensure the economy and stability of microgrid operation, the power fluctuations of renewable energy source (RES) and the lifetime characteristics of battery energy storage system (BESS) should be considered. The influence of charging and discharging depth and rate on the lifetime of BESS is researched, a model of battery energy storage system for real-time optimal scheduling is established, and the alternating direction method of multipliers is adopted for the distributed optimal scheduling of microgrid clusters. The distributed optimization method does not require any global information and can protect the privacy of microgrid in the maximum extent. Simulation results …
Dynamic Spatio-Temporal Anomaly-Aware Correlation Filtering Object Tracking Algorithm, Yunfei Qiu, Xiangrui Bu, Boqiang Zhang
Dynamic Spatio-Temporal Anomaly-Aware Correlation Filtering Object Tracking Algorithm, Yunfei Qiu, Xiangrui Bu, Boqiang Zhang
Journal of System Simulation
Abstract: In view of the fact that the background perception algorithm does not establish a relationship with the spatio-temporal domain characteristics of the target, and cannot accurately deal with the occlusion, deformation and other abnormal tracking, a object tracking algorithm which can adaptively perceive the spatio-temporal anomalies is proposed. In the training stage of correlation filter, the adaptive spatial regularization term is introduced to establish a relationship with the spatio-temporal characteristics of sample. The abnormal perception method is proposed according to the peak value of response map. Taking advantage of the different confidence of historical filter and the continuity of …
Flipper Control Method For Tracked Robot Based On Deep Reinforcement Learning, Hainan Pan, Bailiang Chen, Kaihong Huang, Junkai Ren, Chuang Cheng, Huimin Lu, Hui Zhang
Flipper Control Method For Tracked Robot Based On Deep Reinforcement Learning, Hainan Pan, Bailiang Chen, Kaihong Huang, Junkai Ren, Chuang Cheng, Huimin Lu, Hui Zhang
Journal of System Simulation
Abstract: Tracked robots with flippers have certain terrain adaptation capabilities. To improve the intelligent operation level of robots in complex environments, it is significant to realize the flipper autonomously control. Combining the expert experience in obstacle crossing and optimization indicators, Markov decision process(MDP) modeling of the robot's flipper control problem is carried out and a simulation training environment based on physics simulation engine Pymunk is built. A deep reinforcement learning control algorithm based on dueling double DQN(D3QN) network is proposed for controlling the flippers. With terrain information and robot state as the input and the four flippers' angle as the …
Improved Multi-Objective Swarm Algorithm To Optimize Wash-Out Motion And Its Simulation Experiment, Hui Wang, Le Peng
Improved Multi-Objective Swarm Algorithm To Optimize Wash-Out Motion And Its Simulation Experiment, Hui Wang, Le Peng
Journal of System Simulation
Abstract: Addressing the issues such as signal loss, distraction, and bad wash-out effect caused by improper parameter selection in classic wash-out algorithms, an improved multi-objective artificial bee colony algorithm is proposed to optimize the filter parameters of the classical wash-out algorithm to improve the effect. For the problems in the initialization and local optimization of traditional swarm algorithm, Circle mapping and Pareto local optimization algorithm are introduced. The human perception error model, acceleration difference model, and displacement model are established, and the model function is used as the objective function, the parameters of the classical wash-out algorithm is optimized by …
Bus Traffic Strategy Based On Immune Theory In Network Environment, Cao Li, Rui Zheng, Xiaolu Ma, Ziqiong Ding, Junyi Zhong, Sheng Zhang, Jingjing Qi
Bus Traffic Strategy Based On Immune Theory In Network Environment, Cao Li, Rui Zheng, Xiaolu Ma, Ziqiong Ding, Junyi Zhong, Sheng Zhang, Jingjing Qi
Journal of System Simulation
Abstract: In V2X network environment, the bus system can obtain dynamic global information and the bus traffic strategy is carried out based on the road scene between adjacent bus stops. The mathematical model of bus rapid traffic is constructed with the difference of green time ratio as the main parameter. A hybrid genetic operator is proposed on the basis of the combination of genetic algorithm and immune theory, the design of affinity, the selection of excellent antibodies. A bus traffic strategy based on immune theory is proposed on the basis of the improvement of adaptive crossover and mutation probability. The …
Short-Term Bus Passenger Flow Prediction Based On Convolutional Long-Short-Term Memory Network, Jing Chen, Zhaochong Zhang, Linkai Wang, Mai An, Wei Wang
Short-Term Bus Passenger Flow Prediction Based On Convolutional Long-Short-Term Memory Network, Jing Chen, Zhaochong Zhang, Linkai Wang, Mai An, Wei Wang
Journal of System Simulation
Abstract: To address the problem that the traditional short-time passenger flow prediction method does not consider the temporal characteristics similarity between the inter-temporal passenger flows, a shorttime passenger flow prediction model k-CNN-LSTM is proposed by combining the improved k-means clustering algorithm with the CNN and the LSTM. The k-means is used to cluster the intertemporal timeseries data, the k-value is determined by using the gap-statistic, and a traffic flow matrix model is constructed. A CNN-LSTM network is used to process the short-time passenger flows with spatial and temporal characteristics. The model is tested and parameter tuned by the real dataset. …
Design Of 3d Visualization Monitoring System For Oil Field Pumping Unit Based On Unity3d, Liqiang Liu, Wenlei Sun, Yi Wang, Bingkai Wang
Design Of 3d Visualization Monitoring System For Oil Field Pumping Unit Based On Unity3d, Liqiang Liu, Wenlei Sun, Yi Wang, Bingkai Wang
Journal of System Simulation
Abstract: Aiming at the defects of single monitoring form, low degree of 3D visualization and poor linkage of pumping unit, the information-physical real-time mapping is introduced to develop the 3D visualization monitoring system for oil field pumping unit. The digital space of pumping unit are designed and the design architecture of virtual-real interaction layer is built. The composition and relation framework of 3D visualization system are built. Combined with the inverse kinematics, the mathematical model is built, and the overall architecture of the pumping unit 3D visualization system is designed based on the five-dimensional model and Unity3D platform. The beam …
Ground Target Recognition And Damage Assessment Of Patrol Missiles Based On Multi-Source Information Fusion, Yibo Xu, Qinghua Yu, Yanjuan Wang, Ce Guo, Shiru Feng, Huimin Lu
Ground Target Recognition And Damage Assessment Of Patrol Missiles Based On Multi-Source Information Fusion, Yibo Xu, Qinghua Yu, Yanjuan Wang, Ce Guo, Shiru Feng, Huimin Lu
Journal of System Simulation
Abstract: For the multiple patrol missiles to attack the high defense capacity targets, a mobile ground target detection and damage assessment method based on multi-source information fusion is proposed. The multi-source information fusion of infrared images and RGB images is carried out by using IoU determination. A novel two-stage tightly coupled damage assessment method based on YOLO-VGGNet of patrol missiles to mobile ground targets is proposed. This method can fully use the advantage of deep semantic information extraction of CNNs and introduce the infrared damaging information simultaneously to achieve the online and real-time damage assessment of mobile ground targets. The …
A Review On Additive Manufacturing For Aerospace Application, Radhika C, Ragavanantham Shanmugam, Monsuru Ramoni, Gnanavel Bk
A Review On Additive Manufacturing For Aerospace Application, Radhika C, Ragavanantham Shanmugam, Monsuru Ramoni, Gnanavel Bk
Manufacturing & Industrial Engineering Faculty Publications
Additive manufacturing, a cutting-edge technology often colloquially known as 3D printing, is a transformative process used to meticulously fabricate complex components by adding material layer upon layer. This revolutionary manufacturing method allows for precise control and customization, making it a go-to choice in various industries, from aerospace to healthcare. The adroitness of additive manufacturing in creating a complex geometry as a whole is very much harnessed by the aerospace Industry. Generating a component using additive manufacturing involves optimal design, methods, and processes. This review gives a broad knowledge in developing a part or product by choosing the appropriate design, method, …
Fatigue Characteristics Of Steel–Concrete Composite Beams, Ayman El-Zohairy, Hani Salim, Hesham Shaaban, Mahmoud T. Nawar
Fatigue Characteristics Of Steel–Concrete Composite Beams, Ayman El-Zohairy, Hani Salim, Hesham Shaaban, Mahmoud T. Nawar
Faculty Publications
Fatigue in steel–concrete composite beams can result from cyclic loading, causing stress fluctuations that may lead to cumulative damage and eventual failure over an extended period. In this paper, the experimental findings from fatigue loading tests on composite beams with various arrangements are presented. Fatigue tests were performed up to 1,000,000 cycles using four-point loading, encompassing various ranges of shear stress at a consistent amplitude. Additionally, the effects of external post-tensioning and the strength of the shear connection were investigated. Static tests were run until failure to assess the enduring strength of the specimens subjected to fatigue. The cyclic mid-span …