Operations Research, Systems Engineering and Industrial Engineering Commons^™

Identifying Diurnal Variability Of Brain Connectivity Patterns Using Graph Theory, Farzad Vasheghani Farahani

Electronic Theses and Dissertations, 2020-2023

Circadian rhythms are 24-hour fluctuations determining periodicity in a wide range of physiological processes, including neural activity and hormone secretion, which controls sleeping and feeding habits. Despite significant diurnal variation in human brain function, neuroscientists have rarely considered the effects of time-of-day on their studies. Moreover, there are interpersonal discrepancies in sleep-wake patterns, diurnal preferences, and daytime alertness (known as chronotypes), which can cause different diurnal profiles in human cognition and brain performance. The study of circadian typology differences has increased in recent years, however, examining the effects of both time-of-day and people's chronotype requires further elucidation. In the present …

A Study Of Impact Protection Of Metacarpal Gloves, Faisal Mohammed Alessa

Graduate Theses, Dissertations, and Problem Reports (ETD)

Work-related wrist, hand, and finger injuries are highly prevalent in manufacturing and extractive industries. An analysis of mining-related hand injury data from over the past two decades (Alessa et al., 2020) showed that hand injuries caused by insufficient protection against impact loads (e.g. struck by accidents) were categorized with high severity. Existing literature lacks clear classification and quantification methods for the protection provided by impact-resistant gloves (i.e. metacarpal gloves). A new method to establish a quantitative measure of performance for commonly used metacarpal gloves was developed and evaluated.

In the first specific aim, an experimental study using cadaveric hand specimens …

Evaluation Of Object Attributes To Study Speed-Accuracy Trade-Off Of Gloves Using Iso 9241-411 Standard, Isha Gaut

Graduate Theses, Dissertations, and Problem Reports (ETD)

Selection of appropriate gloves plays an important role in the overall comfort and productivity of workers. Currently, there are no standards and/or guidelines available to systematically evaluate the glove performance based on speed-accuracy trade-off. The ISO 9241-411 standard which is based on Fitts’ Law has been extensively used in the literature to measure speed-accuracy trade-off in terms of throughput in the virtual environments. This study was aimed at developing guidelines for implementing ISO 9241-411 standard in the physical environment so that it can be used to estimate (and compare) throughputs of safety gloves. Specifically, the various physical attributes of objects …

Comparison Of Condensation Nuclei Counter And Controlled Negative Pressure Methods Under Different Environmental Conditions Tested With A Mannequin And Human Subjects, Olanrewaju John Fadairo

Graduate Theses, Dissertations, and Problem Reports (ETD)

Continuing concern about exposure to respiratory hazards at various workplaces and prevalent pandemics such as H1N1/09 influenza and COVID-19, have necessitated a need for more research regarding respirators. Quantitative fit testing (QNFT) is a critical component of an OSHA compliant respiratory protection program. QNFTs are often performed in environments where temperature and relative humidity (RH) vary. However, no study has investigated the possible effects of these parameters on penetration and QNFT results.

This comparative study utilized condensation nuclei counter (CNC) and controlled negative pressure (CNP) methods to quantitatively determine simulated mannequin fit factors (SMFFs) and human fit factor (HFFs) using …

Transit Agencies Performance Assessment And Implications, Parisa Hajibabaee

Graduate Theses, Dissertations, and Problem Reports (ETD)

Although most transit systems operate in small urban and rural areas in the United States, these systems have rarely received the same attention as their urban counterparts, both in terms of ensuring the efficiency and effectiveness of their operations and understanding the factors that affect their performance. This thesis's main goals are to assess the performance of rural and small urban public transit agencies and help them evaluate adopting a ridehailing program, thereby improving their performance. We applied operations research and decision-making tools to two public transit projects in small urban and rural areas. The first project focuses on three …

Route Planning For Long-Term Robotics Missions, Christopher Alexander Arend Tatsch

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many future robotic applications such as the operation in large uncertain environment depend on a more autonomous robot. The robotics long term autonomy presents challenges on how to plan and schedule goal locations across multiple days of mission duration. This is an NP-hard problem that is infeasible to solve for an optimal solution due to the large number of vertices to visit. In some cases the robot hardware constraints also adds the requirement to return to a charging station multiple times in a long term mission. The uncertainties in the robot model and environment require the robot planner to account …

Metaheuristics For The Generalized Quadratic Assignment Problem, Roseline Mostafa

Graduate Theses, Dissertations, and Problem Reports (ETD)

The generalized quadratic assignment problem (GQAP) is the task of assigning a set of facilities to a set of locations such that the sum of the assignment and transportation costs is minimized. The facilities may have different space requirements, and the locations may have varying space capacities. Also, multiple facilities may be assigned to each location such that space capacity is not exceeded. In this research, an application of the GQAP is presented for assigning a set of machines to a set of locations on the plant floor. Two meta-heuristics are proposed for solving the GQAP: tabu search (TS) and …

Analysis Of Factors Influencing The Stationarity Of Surface Electromyography Signals Measured In Non-Fatigued Shoulder Muscles, Hui Ci

Graduate Theses, Dissertations, and Problem Reports (ETD)

A reduction in the % stationarity of surface electromyography (SEMG) signals with respect to the initial or fresh condition is used to predict localized muscle fatigue. However, factors other than muscle fatigue can also influence the stationarity of SEMG signals. This study was aimed at analyzing the effect of various work/task related factors on the stationarity of SEMG signals obtained from non-fatigued shoulder muscles. Twelve participants were recruited for data collection and each one performed 120 trials characterized by the combination of 2 shoulder angles (60° and 120°), 2 planes of exertions (sagittal and scapular), 3 force levels (0lb, 2.5lb, …

Sustainability-Based Expert System For Additive Manufacturing And Cnc Machining, Josage Chathura Pamuditha Perera

Graduate Theses, Dissertations, and Problem Reports (ETD)

The development of technologies which enable resource efficient production is of paramount importance for the continued advancement of the manufacturing industry. In order to ensure a sustainable and clean energy future, manufacturers should be able to contrast and validate existing manufacturing technologies on a sustainability basis. In the post COVID-19 era of enterprise management, the use of artificial intelligence to simulate human expert decision making abilities will open new doors to achieving heightened levels of productivity and efficiency. The introduction of innovative technologies such as CNC machining and 3D printing to production systems has redefined the manufacturing landscape in a …

Evaluation Of Control Strategies For Overhead Work Using Electromyography Of Rotator Cuff Muscles, Hossein Motabar

Graduate Theses, Dissertations, and Problem Reports (ETD)

Work-related musculoskeletal disorders (MSDs) of shoulder have a significant impact on overall health and economics in the industrialized nations. Rotator cuff is the most frequently injured region in the shoulder complex. Overhead work is considered as one of the most predominant causes of rotator cuff injuries. The workers in construction, automotive, and aerospace industries are routinely exposed to overhead exertions. Elimination of overhead work is nearly impossible due to various task and technology constraints. Therefore, appropriate intervention strategies based on the engineering and administrative controls opt to be used to prevent the hazardous impact of overhead exertions. The objective of …

Effect Of Particle Concentration, Sealing Condition And Breathing Rate On Total Inward Leakage For N95 Filtering Facepiece Respirators, Taoreed T. Lawal

Graduate Theses, Dissertations, and Problem Reports (ETD)

Several researchers have considered the relationship between total inward leakage (TIL) and other parameters such as sealing condition, particle concentration, type of particulate material breathing parameters, etc., however, there is dearth of information on the effects of varying particle concentration on the penetration efficiency of filtering facepiece respirators (FFRs), hence, this study aims to study the effect of varying NaCl particle concentration, sealing condition and breathing rate on the TIL as a result of the filtering efficiency of the filters.

To achieve this, we followed the sampling procedure used by He et al., 2014. Four different sealing conditions (SCs) namely; …

Evaluation Of Fitts’ Throughput As A Possible Performance Measure For Manual Assembly Tasks, Pradyumna Bettagere Jagadish

Graduate Theses, Dissertations, and Problem Reports (ETD)

Assembly lines are the backbone of the manufacturing sector. Workers at the assembly lines are expected to perform fast pace hand-arm exertions with precision and accuracy. To protect the workers from injuries, OSHA mandates the use of personal protective equipment (PPE) including gloves. Certain assembly operations require the use of special gloves. Some of these gloves can inhibit hand performance, further increasing the task difficulty. The Index of Difficulty (ID) is a metric measured in ‘bits’ quantifies task difficulty through the quotient of target width and target motion, i.e., distance travelled. The time required to complete the target motion is …

Performance Study Of Five Different Cabin Air Filters In The Laboratory And On-Road Drive, Fahad Alqahtani

Graduate Theses, Dissertations, and Problem Reports (ETD)

One of the aims of installing ventilation filters in a car is to prevent vehicle occupants from inhaling potentially harmful aerosols emanating from the environment. Vehicle cabin filters are essential in ensuring that a vehicle's air conditioning system provides clean air to its occupants. The purpose of the cabin filter is to improve air quality inside the car to provide better comfort and better protect occupants from experiencing unwanted respiratory problems. Using cabin filters in air conditioning systems is a common practice in modern vehicle manufacturing. Scientists and engineers are continually seeking new ways of improving the efficiency and effectiveness …

Evaluation Of A Bulge Reduction Technology For Corrugated Fiberboard Containers Under Static Compression, Daan Peleman, Jay Singh, Koushik Saha, Soma Roy

Industrial Technology and Packaging

This research examines the effect of top-to-bottom static compression load on the bulge of RSC containers. The study compares a control regular slotted container (RSC) constructed with corrugated fiberboard to tape-reinforced designs. The bulge reduction, achieved using various tape placements and conditioning environments, were measured. Currently, no research on the effect of reinforcement tape towards reduction in the out-of-plane displacement (bulging) of the corrugated fiberboard panels has been undertaken. Samples related to four different container designs, varying by presence, quantity and the position of the reinforcement tape on the vertical panels, were tested and analyzed. The study involved the use …

Influence Of Fiberboard Container Design On Compression Bulge Displacement, Koushik Saha, Shane Messner, John Dizon, Nirav Chhajed, Jay Singh

Industrial Technology and Packaging

Bulge effect is the out-of-plane displacement of a panel of a corrugated fiberboard box from its original position. This bulge effect often is the result of excessive weight being placed on a box that rests at the bottom of a palletized load. Panels that are out-of-plane reduce the stacking strength of the box and can result in damage to products inside the containers. This study was designed to find the influence of fiberboard container design on its bulging performance when under compression. The objective of the study was to determine if change in height of a regular slotted container will …

Bi-Objective Optimization For A Single Batch Processing Machine, Leena Omar Ghrayeb

Graduate Research Theses & Dissertations

This research proposes a methodology for solving the problem of scheduling jobs with unequal ready times, unequal processing times, and unequal sizes on a single batch processing machine, with the objectives of minimizing makespan and maximum tardiness. Jobs must be placed into batches and scheduled on the machine such that both objectives are minimized, and machine capacity is not violated. The problem under study can be denoted as 1|p-batch, sj, rj| Cmax,Tmax. Based on a review of relevant literature, this problem has not been considered before.

The problem under study is NP-hard. Consequently, meta-heuristics such as Simulated Annealing (SA) and …

Adaptive Vehicle Routing Under Dynamic Uncertain Network Conditions, Upala Junaida Islam

Graduate Research Theses & Dissertations

Routing problems, such as traveling salesman problem, vehicle routing problem, and their variants, have been extensively studied in operations research because of their wide application in transportation and logistics. In this thesis, we consider routing problems in a road network of which the traveling conditions change over time and sometimes are uncertain. Such problems can arise in humanitarian logistics, resident evacuation, and emergency resource delivery after severe weather events and natural disasters. We provide a methodology to support routing decisions including route planning with limited information of the network conditions and route updating as new information becomes available. The dynamic …

Understanding And Measuring Net Positive Business Strategies, Luke Ruffner Robinson

Graduate Student Theses, Dissertations, & Professional Papers

Despite their attempts to mitigate ecological impacts through sustainability initiatives, businesses are a major cause of the world's ecological problems. Some progressive businesses are attempting to move beyond “net zero” in terms of achieving neutral environmental impacts and instead are now pursuing a goal of net positive. Net positive refers to the idea that business activities could contribute value-added benefits to earth’s ecological systems, for example, by using technologies that sequester and store carbon. However, except for a handful of high-profile corporate case studies, little is known about how companies are developing their strategies to become net positive and …

Research In Defense Logistics: Where Are We And Where Are We Going?, George A. Zsidisin, Amanda Bresler, Benjamin T. Hazen, Keith F. Schneider, Taylor H. Wilkerson

Faculty Publications

The purpose of this paper is to provide insight on high-interest areas of research in defense-related logistics and supply chain management and opportunities for advancing theory and practice in this domain.

Strategies Road Freight Transport Leaders Use To Increase Driver Retention, Johnny Mumphrey Jr.

Walden Dissertations and Doctoral Studies

The turnover of skilled over-the-road (OTR) truck drivers in the road freight transportation (RFT) industry results in significant yearly financial losses to organizations across the United States. Leaders in the industry continue to struggle to develop successful strategies for retaining these drivers. Grounded in the motivation hygiene theory, the purpose of this multiple case study was to explore strategies 5 transformational leaders from two RFT firms in North Texas used to improve OTR driver retention. Data collection included semi structured face-to-face interviews, a review of company webpages, and an assessment of company documents (e.g., employee handbooks, training manuals, and vision …

Table Of Contents Jitim Vol 29 Issue 2, 2020

Journal of International Technology and Information Management

Table of contents

Predicting Complex System Behavior Using Hybrid Modeling And Computational Intelligence, Vinayaka Gude

Doctoral Dissertations

“Modeling and prediction of complex systems is a challenging problem due to the sub-system interactions and dependencies. This research examines combining various computational intelligence algorithms and modeling techniques to provide insights into these complex processes and allow for better decision making. This hybrid methodology provided additional capabilities to analyze and predict the overall system behavior where a single model cannot be used to understand the complex problem. The systems analyzed here are flooding events and fetal health care. The impact of floods on road infrastructure is investigated using graph theory, agent-based traffic simulation, and Long Short-Term Memory deep learning to …

Development Of A System Architecture For The Prediction Of Student Success Using Machine Learning Techniques, Tatiana A. Cardona

Doctoral Dissertations

“ The goals of higher education have evolved through time based on the impact that technology development and industry have on productivity. Nowadays, jobs demand increased technical skills, and the supply of prepared personnel to assume those jobs is insufficient. The system of higher education needs to evaluate their practices to realize the potential of cultivating an educated and technically skilled workforce. Currently, completion rates at universities are too low to accomplish the aim of closing the workforce gap. Recent reports indicate that 40 percent of freshman at four-year public colleges will not graduate, and rates of completion are even …

An Approach To System Of Systems Resiliency Using Architecture And Agent-Based Behavioral Modeling, Paulette Bootz Acheson

Doctoral Dissertations

”In today’s world it is no longer a question of whether a system will be compromised but when the system will be compromised. Consider the recent compromise of the Democratic National Committee (DNC) and Hillary Clinton emails as well as the multiple Yahoo breaches and the break into the Target customer database. The list of exploited vulnerabilities and successful cyber-attacks goes on and on. Because of the amount and frequency of the cyber-attacks, resiliency has taken on a whole new meaning. There is a new perspective within defense to consider resiliency in terms of Mission Success.

This research develops a …

Development Of A Modeling Algorithm To Predict Lean Implementation Success, Richard Charles Barclay

Doctoral Dissertations

”Lean has become a common term and goal in organizations throughout the world. The approach of eliminating waste and continuous improvement may seem simple on the surface but can be more complex when it comes to implementation. Some firms implement lean with great success, getting complete organizational buy-in and realizing the efficiencies foundational to lean. Other organizations struggle to implement lean. Never able to get the buy-in or traction needed to really institute the sort of cultural change that is often needed to implement change. It would be beneficial to have a tool that organizations could use to assess their …

Enabling Flexibility Through Strategic Management Of Complex Engineering Systems, Walter Louis Barnes Ii

Doctoral Dissertations

”Flexibility is a highly desired attribute of many systems operating in changing or uncertain conditions. It is a common theme in complex systems to identify where flexibility is generated within a system and how to model the processes needed to maintain and sustain flexibility. The key research question that is addressed is: how do we create a new definition of workforce flexibility within a human-technology-artificial intelligence environment?

Workforce flexibility is the management of organizational labor capacities and capabilities in operational environments using a broad and diffuse set of tools and approaches to mitigate system imbalances caused by uncertainties or changes. …

The Development Of A Project Typology And Selection Tool To Improve Decision-Making In Sustainable Projects, Rakan Alyamani

Doctoral Dissertations

"Decision-making in sustainable projects is a complex and challenging process, especially during the initiating and planning phases of project development, due to influence from several external factors, as well as the uncertain environments surrounding their creation. It is essential to improve the decision-making process in sustainable projects during these two phases by relying on strong decision-making tools. The first contribution in this work identifies gaps in the literature of how institutionalization can impact sustainable projects through the effects of institutional isomorphisms from institutional theory. This helps decision makers better understand the relationship between institutionalization and sustainable projects. The second contribution …

Critical Success Factors And Risk Mitigation Strategy For New Product Development, Rodney A. Ewing

Doctoral Dissertations

”Success in new product development (NPD) offers a competitive and comparative advantage in the marketplace. A primary objective in an NPD project is to launch world class products with minimal risk. To deliver the superior quality and performance customers require, a company must develop the right NPD structure and framework for seamless execution by the NPD project teams throughout the product lifecycle. Companies must understand how to identify and mitigate risk to enable the success of their NPD projects. The costs to develop new products are often a considerable portion of an organization’s budget; however, studies have shown only 60 …

Balancing Labor Requirements In A Manufacturing Environment, Patrick Bernard Dwyer

Doctoral Dissertations

“This research examines construction environments within manufacturing facilities, specifically semiconductor manufacturing facilities, and develops a new optimization method that is scalable for large construction projects with multiple execution modes and resource constraints. The model is developed to represent real-world conditions in which project activities do not have a fixed, prespecified duration but rather a total amount of work that is directly impacted by the level of resources assigned. To expand on the concept of resource driven project durations, this research aims to mimic manufacturing construction environments by allowing a non-continuous resource allocation to project tasks. This concept allows for resources …

Assess The Performance Against Ets And Pm1 And Evaluate The Users’ Experiences Of Comfort Of Nasal Filters, Ibrahim Almuhaidib

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many cities around the world experience severe air pollution. According to the World Health Organization (WHO), 7 million people die annually from exposure to small airborne Particulate Matter (PM) that is found in atmospheric pollution. Particulate matter in atmospheric pollution is one of six classifications of common air pollutants and is typically referred to as PM₁ and PM_2.5. Particulates designated as PM₁ and PM_2.5 refer to particles having aerodynamic diameters of 1 or 2.5 micrometer (µm), respectively. These size ranges of particles are the most commonly found in air pollution. It is hard to differentiate …