Open Access. Powered by Scholars. Published by Universities.®

Operations Research, Systems Engineering and Industrial Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2019

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 1051 - 1080 of 1263

Full-Text Articles in Operations Research, Systems Engineering and Industrial Engineering

Passivity-Based Control For Three-Phase Four-Bridge D-Statcom In Low-Voltage Distribution Network, Zheng Hong, Wencheng Xu, Jiawei Zhang Jan 2019

Passivity-Based Control For Three-Phase Four-Bridge D-Statcom In Low-Voltage Distribution Network, Zheng Hong, Wencheng Xu, Jiawei Zhang

Journal of System Simulation

Abstract: Three-phase four-bridge distribution static synchronous compensator (D-STATCOM) has the obvious superiority in solving the problems that brought by the three-phase unbalanced loads in the three-phase four-wire low-voltage power supply system. The Euler-Lagrange (EL) cycle average model is established based on the synchronous rotation d-q-0 coordinates. In the light of the nonlinear and strong coupling characteristics, the passivity-based control (PBC) and inverse cross coupling control strategy using the d-q axis nonlinear decoupling control. PBC controller is designed by energy shaping and damping injection (ESDI) based on the passivity of the system. The closed-loop system is demonstrating asymptotically stable according to …

Go to article

Formation Mechanism And Simulation Analysis Of Railgun Armature Electromagnetic Transition, Zhiheng Wang, Wan Mei, Xiaojiang Li Jan 2019

Formation Mechanism And Simulation Analysis Of Railgun Armature Electromagnetic Transition, Zhiheng Wang, Wan Mei, Xiaojiang Li

Journal of System Simulation

Abstract: Armature transition of railgun causes rails erosion and change of launching parameters, which is one of the key problems restricting the performance of railgun. The formation mechanism of armature transition at the down-slope of driving current is analyzed. The armature transition estimation model and electromagnetic parameters calculation model are given. The formation process of armature transition at the down-slope of driving current is simulated by AYNSYS Workbench. The current and magnetic field distribution are simulated, so as the armature deformation caused by the armature electromagnetic force. The effect of current dropping rate on armature transition is analyzed. The …

Go to article

Modified Fractional Order Sliding Model Control For Dc Speed Regulating System, Zhicheng Zhao, Zhitao Zhao, Jinggang Zhang, Xianjiao Zhao Jan 2019

Modified Fractional Order Sliding Model Control For Dc Speed Regulating System, Zhicheng Zhao, Zhitao Zhao, Jinggang Zhang, Xianjiao Zhao

Journal of System Simulation

Abstract: An improved fractional order sliding model control (FOSMC) is proposed for DC speed regulating system to eliminate static error easily caused by disturbance in sliding model control. Second order mathematical model is established through taking the derivative of first-order mathematical model of DC speed regulating system. The theory of fractional calculus is introduced to the switching function of sliding mode, and fractional sliding model is designed combining exponential reaching law and second order mathematical model. The control signal of voltage can be obtained through taking output of the controller and integrator in series. Stability analysis of the system is …

Go to article

A Mppt Control Method Of Wind Turbines With Nonsingular And Fast Terminal Sliding Mode, Dazhong Li, Wu Feng Jan 2019

A Mppt Control Method Of Wind Turbines With Nonsingular And Fast Terminal Sliding Mode, Dazhong Li, Wu Feng

Journal of System Simulation

Abstract: In order to improve the energy capture efficiency of doubly-fed induction generator (DFIG), a control method is designed based on direct speed control (DSC) to achieve maximum power point tracking (MPPT). An effective wind speed estimator based on high-degree cubature Kalman filter (HCKF) and Newton-Raphson method (NR) is proposed for solving the difficulty in obtaining effective wind speed using traditional control strategy. A speed controller based on nonsingular fast terminal sliding mode surface is designed to obtain a faster speed response for the speed loop. The numerical simulation research of the 2.4MW wind turbine under rapidly variable wind …

Go to article

Transformer Fault Diagnosis Based On Feature Extraction Of Relative Transformation Principal Component Analysis, Yongbo Tang, Yinguo Xiong Jan 2019

Transformer Fault Diagnosis Based On Feature Extraction Of Relative Transformation Principal Component Analysis, Yongbo Tang, Yinguo Xiong

Journal of System Simulation

Abstract: In order to handle the problem that the feature extraction of dissolved gas analysis (DGA) data by principal component analysis (PCA) is not distinct, a new transformer fault diagnosis method based on relative transformation (RT) PCA is proposed. The original data space is converted to the relative data space by relative transformation which makes the transformed data more distinguishable. PCA is employed to reduce the dimension of relative space to make the features more representative in the relative space. Diagnosis model based on least squares support vector machine (LSSVM) is set up according to the fault characteristic of transformer. …

Go to article

Optimizing Control Of Total Heat Supply Based On Machine Learning, Li Qi, Xingqi Hu, Jianmin Zhao Jan 2019

Optimizing Control Of Total Heat Supply Based On Machine Learning, Li Qi, Xingqi Hu, Jianmin Zhao

Journal of System Simulation

Abstract: The central heating system has complex structure, along with the characteristics of hysteresis, strong coupling and nonlinear. Contraposing the problem that the process is difficult to be identified and controlled by the mechanism modeling, an optimal control method of heat source total heat production based on machine learning is proposed. The heat source model of central heating system is established by BP neural network and long short-term memory neural network. Under the premise of meeting the demand of heating quality, with the total energy consumption as the optimization objective, the optimal control sequence of water supply temperature and water …

Go to article

Integrated Simulation Of Mixed Traffic Flow On Elementary And Middle School Gate’S Road When Students Going To School, Mingbao Pang, Yanan Pei, Zhang Ning Jan 2019

Integrated Simulation Of Mixed Traffic Flow On Elementary And Middle School Gate’S Road When Students Going To School, Mingbao Pang, Yanan Pei, Zhang Ning

Journal of System Simulation

Abstract: Synthesizing the advantages and disadvantages of social force model (SFM) and cellular automaton model (CAM), a simulation model of mixed traffic flow including pedestrian, motor vehicle and non-motorized vehicle on the interference road section of elementary and middle school’s gate when students going to school was established. The traffic flow characteristics after changing the proportion of students going to school by private car and implementing different traffic organization schemes were analyzed. The results of the examples indicate that its organization phenomena can be realized by decreasing the proportion of pupils taking private cars and implementing different measures of traffic …

Go to article

Integrated Berth And Quay Crane Allocation Multi-Objective Algorithm For Container Terminal, Wang Xu, Shixin Liu, Ruiyou Zhang, Wang Jia Jan 2019

Integrated Berth And Quay Crane Allocation Multi-Objective Algorithm For Container Terminal, Wang Xu, Shixin Liu, Ruiyou Zhang, Wang Jia

Journal of System Simulation

Abstract: This paper researches on a continuous berth and quay crane allocation problem for low carbon container terminal. Considering the constraints of stochastic arrival time and limited truck transportation ability, a multi-objective nonlinear mixed integer programming model is established to minimize carbon emissions and average delay time. An efficient non-dominate sorting genetic algorithm II (ENSGA-II) is designed to deal with this problem. According to the characteristics of the problem, encoding rule and decoding rule based on rolling-horizon simulation, PPX crossover operator with elite selection, multi constraints mutation operator and repair operator are adopted. The results of several simulation experiments …

Go to article

A Method Of Finding The Shortest Path Of Dynamic Networks, Lunwen Wang, Zhang Ling Jan 2019

A Method Of Finding The Shortest Path Of Dynamic Networks, Lunwen Wang, Zhang Ling

Journal of System Simulation

Abstract: We analyze the research status of finding the shortest path of dynamic networks, analyze the complexity of getting the shortest path, study the relationship between the structure of the dynamic networks and finding the shortest path of the dynamic networks. It is proved that dynamic networks defined by velocity automatically meet weak FIFO’s condition. The networks whose passing function of any side is not decreasing function equals dynamic networks which use velocity. The sufficient condition of directly using Dijkstra algorithm to get the shortest path is that the networks must meet weak FIFO’s condition. How to build a …

Go to article

Achievements And Developments Of Hysteresis And Creep Of Pneumatic Artificial Muscles, Shenglong Xie, Haitao Liu, Jiangping Mei Jan 2019

Achievements And Developments Of Hysteresis And Creep Of Pneumatic Artificial Muscles, Shenglong Xie, Haitao Liu, Jiangping Mei

Journal of System Simulation

Abstract: Regarding to the problems of hysteresis and creep, the developments and achievements of the research on pneumatic artificial muscles at home and abroad are systemically reviewed. The state of the art is summarized in terms of characteristics, reasons causing, modeling and control strategies based on the hysteresis and creep modeling. The problems in recent research are analyzed and the direction for further research is put forward. The theoretical study on hysteresis and creep of pneumatic artificial muscle is limited. The hysteresis modeling needs to consider the time-varied parameters caused by creep. Neural network modeling needs to solve …

Go to article

Simulation Optimization On Multi-Ports Slot Plan Problem Considering Dispatching Sequence Of Containers In Yard, Zhang Yu, Huimin Cheng, Xu Jin, Tian Wei, Junfeng Sun Jan 2019

Simulation Optimization On Multi-Ports Slot Plan Problem Considering Dispatching Sequence Of Containers In Yard, Zhang Yu, Huimin Cheng, Xu Jin, Tian Wei, Junfeng Sun

Journal of System Simulation

Abstract: The multi-ports slot plan problem considering dispatching sequence of containers in yard is solved by an integer linear programming model, which minimizes heeling moment. The influences of different dispatching rules on solving the problem are simulated and analyzed through the programming model. Accordingly, a simulation optimization model based on genetic algorithm is constructed in order to enhance the computational efficiency. The simulation optimization model simulates the process of dispatching containers and loading vessel. The feasible solution is constructed through rules sets and inputted into the optimization model. An efficient encoding and decoding solutions are developed in genetic algorithm, …

Go to article

A 3d Convolution Neural Network For Operational Aggregation Behavior Prediction, Liao Ying, Yi Zhuo, Xiaofeng Hu, Tian Yuan, Jiuyang Tao Jan 2019

A 3d Convolution Neural Network For Operational Aggregation Behavior Prediction, Liao Ying, Yi Zhuo, Xiaofeng Hu, Tian Yuan, Jiuyang Tao

Journal of System Simulation

Abstract: Operational aggregation behavior prediction has encountered the challenges of large feature space, dynamic changes of related combat units and large behavior noise, etc. To address these issues, a operational aggregation behavior prediction method based on a 3D convolution neural network is proposed. In this method, a three-dimension convolution neural network is constructed by introducing the time dimension into the two-dimension convolution so as to recognize the operational aggregation behaviors. After that, a reconfigurable hierarchical long short-term memory (LSTM) network is adopted to analyze the temporal aggregation behavior data of related combat units, with which the key factors of aggregation …

Go to article

Airport Surface Traffic Simulation Based On Agent-Cellular Automaton, Zhiwei Xing, Shijiao Li, Yunxiao Tang, Luo Qian Jan 2019

Airport Surface Traffic Simulation Based On Agent-Cellular Automaton, Zhiwei Xing, Shijiao Li, Yunxiao Tang, Luo Qian

Journal of System Simulation

Abstract: In order to analyze the traffic situation of airport surface, an airport surface traffic simulation method is proposed based on the theory of agent and cellular automaton model. The traffic characteristics of airport surface are analyzed. The combination of agent theory and the cellular automaton model is discussed. Different parts of the airport surface traffic are defined respectively as one-dimensional cellular automaton, and aircraft agent is designed, which means that a traffic simulation model is constructed based on agent-cellular automaton. The airport surface traffic is simulated. Simulation results show that the simulation method has the characteristics of simple, high …

Go to article

Development Of Simulated Driving Dynamics Simulation System Of High-Speed Train, Sun Zhuang, Huanyun Dai, Gan Feng, Gao Hao Jan 2019

Development Of Simulated Driving Dynamics Simulation System Of High-Speed Train, Sun Zhuang, Huanyun Dai, Gan Feng, Gao Hao

Journal of System Simulation

Abstract: In order to truly simulate the moving postures of the high-speed train at run time, based on six degrees of freedom Stewart motion platform, dynamics simulation system and simulation operation interface are developed by VC++ programming language. The dynamics model of high-speed train system is presented in this paper, whose first vehicle is a detailed coupled model including longitudinal, lateral and vertical DOF (Degree of Freedom), and other vehicles are the mass models only with the longitudinal DOF. In the process of the simulation, the dynamics model is updated in real time according to line data and driver's …

Go to article

Modeling Of Submarine Torpedo-Launching Simulation, Jinping Wu, Junchao Mao, Wenqiang Ding Jan 2019

Modeling Of Submarine Torpedo-Launching Simulation, Jinping Wu, Junchao Mao, Wenqiang Ding

Journal of System Simulation

Abstract: In order to lay foundation for modeling and simulation of operation problems such as torpedo attacking, torpedo operation application and torpedo operation effectiveness analysis, etc., the model of submarine torpedo-launching is built in the way of qualitative analysis and classical mathematics. As an important composition of submarine torpedo-attacking, torpedo-launching mainly means the course from torpedo out-tube to hitting target or voyage end, which is between the stage of “controlling weapon launching” and “observing attack effectiveness” during the whole torpedo-attacking course. Through analyzing the seven-stage trajectory process of torpedo-launching, the target detecting model and acoustic homing range model of …

Go to article

A New Method On Trajectory Planning For Mobile Robots Using Bezier Curves, Sun Lei, Lishuang Zhang, Zhou Lu, Xuebo Zhang Jan 2019

A New Method On Trajectory Planning For Mobile Robots Using Bezier Curves, Sun Lei, Lishuang Zhang, Zhou Lu, Xuebo Zhang

Journal of System Simulation

Abstract: In view ofthe trajectory planning for the mobile robots, an efficient method based on Bezier curves is proposed, which produces better solution with shorter path and faster trajectory, compared with the existing methods. The problem of trajectory planning is divided into path planning and velocity planning. A Bezier curve is used to connect each two line-segments to obtain shorter paths. It is proved that the order of the used Bezier curves is at least five to ensure the curvature continuity of the whole path. Taking a differential-driven wheeled mobile as an example, to follow the planned path steadily and …

Go to article

Design And Implementation Of Signal Level Mono-Pulse Tracking Radar Simulation System, Chaoxuan Shang, Zhao Yang, Zhuangzhi Han, Han Ning Jan 2019

Design And Implementation Of Signal Level Mono-Pulse Tracking Radar Simulation System, Chaoxuan Shang, Zhao Yang, Zhuangzhi Han, Han Ning

Journal of System Simulation

Abstract: In view of the poor compatibility between the particle size of simulation and tracking feedback control in tracking radar simulation system, a signal level mono-pulse tracking radar simulation system is constructed based on SystemVue simulation platform. Simulation system is layered and simulation framework is built according to the requirements of the simulation system. The key technologies in the process of simulation are analyzed, and the simulation results with distance and angle tracking loop are given. System implementation is of great significance for mono-pulse radar system design, demonstration, equipment development appraisal as well as combat training and …

Go to article

A Simulation Study Of Appointment Rulesin Ct Department, Li Jun, Xuemei Lin, Zhou Jie Jan 2019

A Simulation Study Of Appointment Rulesin Ct Department, Li Jun, Xuemei Lin, Zhou Jie

Journal of System Simulation

Abstract: A discrete event simulation model was established onExtendSimsoftware, , with the average patient waiting time, average idle time of the examination rooms and total cost which wasthe linearlyweighted sum of them being as performance measures.Estimated value and sample data of these performance measures of 9 basic appointment scheduling rules and 9 adjusted ones were produced by the de-duplication methodso that analysis of variance and efficient frontier were carried out to compare the effects of different “staggered reservation rules” on this queuing system.It was showed that, for different beneficiaries (patients, hospital or both), the appointment scheduling rules …

Go to article

Adaptive Fuzzy Sliding Mode Controller With Predictive Control For Redundant Manipulators With Variable Payload, He Jun, Minzhou Luo, Jianghai Zhao, Linsen Xu, Li Tao Jan 2019

Adaptive Fuzzy Sliding Mode Controller With Predictive Control For Redundant Manipulators With Variable Payload, He Jun, Minzhou Luo, Jianghai Zhao, Linsen Xu, Li Tao

Journal of System Simulation

Abstract: This paper presents an adaptive fuzzy sliding mode controller with Kalman predictive control (AFSMCK) for the redundant robotic manipulator handling a variable payload to achieve a precise trajectory tracking in the task space. This approach could be applied to solve the problems caused by the variable payload and model uncertainties. A Kalman predictive controller using the recursive algorithm is presented for an accurate prediction of a variable payload. The adaptive fuzzy logic algorithm is designed to approximate the parameters of the sliding mode controller to avoid chattering in real time. Lyapunov theory is applied to guarantee the stability of …

Go to article

Modeling And Numerical Simulation Of Tissue Engineering Scaffold 3d Printing Process, Congping Chen, Jieguang Huang, Hu Qiong, Yanhua Ran, Li Bo Jan 2019

Modeling And Numerical Simulation Of Tissue Engineering Scaffold 3d Printing Process, Congping Chen, Jieguang Huang, Hu Qiong, Yanhua Ran, Li Bo

Journal of System Simulation

Abstract: In the process of tissue engineering scaffold fabrication using injecting 3D printing, the viscous fluid material is extruded out with a style of microfilament, which is deposited on a substrate layer by layer. The materials spread, pile up, remelt and solidify as a consequence of the couple effects of gravity, surface tension, viscous force and solidification drag force. Aiming at the above issues, the forming process of scaffold with homogeneously-sized space pores is studied with a CFD approach to research the pore forming mechanism. The results show that the viscous fluid is cooled mainly by the substrate, and heat …

Go to article

Parameter Identification For Pmsm Based On Multi-Innovation Approximate Least Absolute Deviation Identification Algorithm, Dinghui Wu, Jianyu Zhang, Yanxia Shen, Zhicheng Ji Jan 2019

Parameter Identification For Pmsm Based On Multi-Innovation Approximate Least Absolute Deviation Identification Algorithm, Dinghui Wu, Jianyu Zhang, Yanxia Shen, Zhicheng Ji

Journal of System Simulation

Abstract: In view of the problem that the results of traditional identification algorithm are not accurate caused by the peak noise signal in the environment, a new algorithm based on the forgetting factor multi-innovation approximate least absolute deviation (MIALAD) identification algorithm is proposed. Combined with the system voltage equation of permanent magnet synchronous motor (PMSM), a discrete identification model is constructed. By using vector control method, the input and output data of the identification model are obtained to identify the rotor resistance and inductance. The simulation results show that this identification algorithm can obtain the accurate parameters of the PMSM …

Go to article

Discrete Control Simulation Of Agitation Tank Based On Taylor Finite Difference, Yunong Zhang, Yaqiong Ding, Le Li, Deyang Zhang, Binbin Qiu Jan 2019

Discrete Control Simulation Of Agitation Tank Based On Taylor Finite Difference, Yunong Zhang, Yaqiong Ding, Le Li, Deyang Zhang, Binbin Qiu

Journal of System Simulation

Abstract: Zhang dynamics is used to solve the system equations of the agitation tank to get controllers. At the same time, Taylor finite difference method is used in the computer discrete control simulation for the agitator tank system. In addition, the convergence stability of Zhang dynamics applied to the agitation tank is proved through theoretical analysis. In order to achieve the draining purpose for the agitation tank, the computer discrete control simulation is conducted by means of MATLAB. For comparison, the computer simulation based on the neural network predictive controller is carried out. The comparative simulation results substantiate the …

Go to article

Fast False Scene Jamming Algorithm For Sar-Gmti Based On Moving Jamming Station, Mingxing Fang, Daping Bi, Aiguo Shen Jan 2019

Fast False Scene Jamming Algorithm For Sar-Gmti Based On Moving Jamming Station, Mingxing Fang, Daping Bi, Aiguo Shen

Journal of System Simulation

Abstract: Traditional false scene jamming of SAR is invalid for SAR-GMTI system, which does not have the feature of moving targets, so a fast false scene jamming algorithm for SAR-GMTI based on moving jamming station is proposed. Through reasonable simplification of the traditional algorithm, the fast false scene jamming algorithm of matrix form is put forward. The method is proposed to take advantage of both fast false scene jamming algorithm and moving jamming station, so it can produce false scene jamming with real moving feature. It not only solves the real-time problem of traditional false scene jmming, but …

Go to article

Smooth Transition Method Over Entire Speed Range Of Switched Reluctance Motor, Diansheng Sun Jan 2019

Smooth Transition Method Over Entire Speed Range Of Switched Reluctance Motor, Diansheng Sun

Journal of System Simulation

Abstract: In order to smoothly switch different control modes of switched reluctance motor under the condition of low speed and high speed, a novel scheme using function fitting method to control turn-on angle, turn-off angle and phase current chopping is proposed. The active disturbance rejection speed control system is structured for switched reluctance motor in order to restrain all kinds of disturbance and improve the dynamic performance. Simulation results indicate that the principle of the method is correct and the turn-on angle, turn-off angle and phase current chopping is coordinated to realize the smooth switching of different control modes with …

Go to article

A Novel Algorithm For Improving Fairness Between Uplink And Downlink Flows In Heterogeneous Network, Peiyu Li, Zheqing Li, Wang Hui, Xia Qian Jan 2019

A Novel Algorithm For Improving Fairness Between Uplink And Downlink Flows In Heterogeneous Network, Peiyu Li, Zheqing Li, Wang Hui, Xia Qian

Journal of System Simulation

Abstract: In order to improve the fairness between uplink and downlink flows in AP optimization, a novel algorithm called FOUD(fairness over uplink and downlink) is proposed.Considering the influence of the attempt limit and the bit error rate of wireless, the FOUD algorithm modeling of AP and wireless stations is studied separately by using two-dimensional Markov chain, which derives the probability of data sending under the condition of different bit error rate and different number of uplink and downlink flows. Simulation results show that FOUD can improve the fairness of the uplink and downlink bandwidth as well as the …

Go to article

Frequency Domain Analysis Of Common Configuration Semi-Submersible Drilling Platform Based On System Simulation, Chen Bo, Zhiyong Yu, Lü Yong, Xiaojian Li Jan 2019

Frequency Domain Analysis Of Common Configuration Semi-Submersible Drilling Platform Based On System Simulation, Chen Bo, Zhiyong Yu, Lü Yong, Xiaojian Li

Journal of System Simulation

Abstract: To analysis of 4 semi-submersible drilling platform hydrodynamic performance providing a comprehensive guidance for system selection. The 1:1 3D wet surface model is established by ANSYS and numerical simulation is carried out based on the dynamic analysis software AQWA. Simulation results show that longitudinal waves impact the surge, heaving and pitching motion a lot, beam seas have large effects on the sway, heave, roll motion vertical heave response increases significantly, as will as surge, sway, heave damping coefficient of vector direction and the added mass coefficient of algebraic. We can not only increase the number of columns to …

Go to article

Structure Optimization Analysis Of Multi-Span Antisymmetric Arch Tower Cable-Stayed Bridge, Xijun Liu, Yuan Bo, Tianyi Liu Jan 2019

Structure Optimization Analysis Of Multi-Span Antisymmetric Arch Tower Cable-Stayed Bridge, Xijun Liu, Yuan Bo, Tianyi Liu

Journal of System Simulation

Abstract: In order to analyze its force under different sections and arch span ratio of the Antisymmetric arch tower cable-stayed bridge, the paper takes an anti-symmetric arch tower cable-stayed bridge as an engineering example. Considering the effect of dead load and temperature, finite software is used to calculate the stress of the arch tower and deflection of the deck and its corresponding dynamic characteristics under different types of arch sections and different rise-span ratio of the arch. The results show that the circular cross-section has better mechanical performance compared with other types of arches tower section with the same …

Go to article

Fuzzy Sliding Backstepping Mode Control For Flight Simulator Servo Based On Friction And Disturbance Compensation, Huibo Liu, Shanglei Liu Jan 2019

Fuzzy Sliding Backstepping Mode Control For Flight Simulator Servo Based On Friction And Disturbance Compensation, Huibo Liu, Shanglei Liu

Journal of System Simulation

Abstract: Considering friction, modeling errors and other uncertainties of flight simulator servo system, a compensation strategy which combines model-based friction compensation with nonlinear disturbance observer compensation was proposed. First, the friction is modeled , whose parameters are identified by using genetic algorithm, and using the identified model to compensate. Second, using a nonlinear disturbance observer to estimate the modeling errors, friction less-compensation or over-compensation and other uncertainties, and using this observed value to compensate. The system adopted sliding backstepping controller to ensure the stabilization of the system. Finally, the fuzzy algorithm is adopted to adjust the switching gain of sliding …

Go to article

Interval Fuzzy Modeling Based On Minimizing-Norm On Approximation Error, Xiaoyong Liu, Zhonggang Xiong, Changguo Yan Jan 2019

Interval Fuzzy Modeling Based On Minimizing-Norm On Approximation Error, Xiaoyong Liu, Zhonggang Xiong, Changguo Yan

Journal of System Simulation

Abstract: As the obtained data in many practical applications tend to be uncertain or inaccurate, conventional modeling methods characterized by deterministic model for this type of data have become undesirable. Taking linear programming and TS fuzzy model and some ideas from norm minimization into consideration, a novel method identifying interval fuzzy model (INFUMO) consisting of upper and lower TS fuzzy model (referred to as fU and fL) has been studied. In order to solve INFUMO, optimization problems based on minimizing-norm with respect to approximation error corresponding to fU and fL are constructed. Finally, optimization problems …

Go to article

Preliminary Study Of Modeling And Simulation Technology Oriented To Neo-Type Artificial Intelligent Systems, Libo Hu, Xudong Chai, Zhang Lin, Li Tan, Duzheng Qing, Tingyu Lin, Liu Yang Jan 2019

Preliminary Study Of Modeling And Simulation Technology Oriented To Neo-Type Artificial Intelligent Systems, Libo Hu, Xudong Chai, Zhang Lin, Li Tan, Duzheng Qing, Tingyu Lin, Liu Yang

Journal of System Simulation

Abstract: A brief interpretation of the rapidly developing “New Internet+ Big Data+ Artificial Intelligence+” era is given in the paperand the essence and the architectureof neo-type artificial intelligence systems are explained. The meaning of neo-type artificial intelligence system oriented modelling and simulation technology is proposed and the new challenges they are facing are discussed. The research contents and preliminaryresults on neo-type artificial intelligence system oriented modelling and simulation technology are given, which includeneo-type artificial intelligence system oriented modelling/secondary modelling, intelligent simulation computer, smart cloud simulation and intelligent simulation hardware/software supporting system technology, and intelligent simulation system application engineering technology. Several …

Go to article

First Prev Next Last