Operations Research, Systems Engineering and Industrial Engineering Commons^™

Atlanta (Kennesaw) Ereturn Project, Shannon Ard, Trisha Donnelly-Nelson, Scott Michael

Senior Design Project For Engineers

The Siemens Energy, Inc. Tool and Instrument Facility is an internal tool rental center that assembles tool kits and ships them to power generation sites. When miscellaneous, broken or extra tools are returned, they are sent to the eReturn area, where tools are processed and reentered into inventory. The current eReturn system is long and complex. The cluttered area causes tools to remain in eReturn for extended periods before being reentered into the inventory. The additional time causes unnecessary ordering and prevents tools from being used in more kits. The team's objective is to determine a solution that will allow …

Atlanta Traffic Optimization Final Design Review, Biram Nicol, Vick Abwavo, Brandon Harris

Senior Design Project For Engineers

To solve the Metro-Atlanta traffic problem, we have embarked in numerous efforts to find feasible goals that had worked in other states with similar situations. In dealing with the traffic problem around the Metro area, we have designed a rail system to counter if our proposed idea of eliminating trucks within the Metro area is realized. This will be a more cost-effective area as the rail system is set to pay for itself after a decade and half of operation.

This idea might be considered radical, but our findings showed that 39.50% of freight is transferred by rail according to …

Grady Health Systems Linen Optimization, Kyleia Hutton, Samira Abdi

Senior Design Project For Engineers

Grady Memorial Hospital, under Grady Health Systems (GHS), is the fifth largest public hospital systems in the United States of America. In the Southeast region, Grady Memorial Hospital is a premier level I trauma institution, that also provides other medical service specialties that accumulate a diverse, and knowledgeable set of medical professionals. Within this report, there are various recommendations that our team has presented based on different scenarios that could be present within the interaction of the linen management department and other departments at Grady Health Systems. These recommendations will aid in determining the best decision that can be made …

Feasibility Study Of Mohawk Industries Water Bottle Recycling Program With Automated Compactor/Baler, Brody Cook, Chris Yeager, Parker Cook

Senior Design Project For Engineers

Mohawk Industries requested a senior design project for a feasibility study of a compactor/baler program. The compactor/baler program has the potential to reduce Mohawk Industries’ polyethylene terephthalate (PET) recycling center costs, thereby increasing the company’s profits. Mohawk Industries uses PET from recycled plastic bottles as a raw material to extrude carpet yarn fibers. Currently, Mohawk Industries has two methods to obtain the PET required to extrude the carpet yarn fibers: purchase recycled bottles from landfills/recycling centers and extrude into PET pellets, or purchase PET pellets from an outside source at a much higher cost. The compactor/baler program would introduce a …

Service Drive 2020 - Fine Design, David Sirotinsky, Ling Marshall

Senior Design Project For Engineers

This report explores a cloud network solution for the automotive industry. The project scope was defined with a problem statement. Robust connectivity solutions offered by the OEM manufacturers provide data communication between the customer and the connected car, but lack data communication from the customer to the private franchise dealers. This antiquated business model creates variation in operation from one dealer to the other and creates a challenge to apply a standardized solution. One fundamental requirement is to provide a network solution that can seamlessly integrate into existing hardware, software and process infrastructure.

The project group conducted interviews with two …

Sauce Repackaging Test: Atlanta, Hannah Smith, Gideon Larios, Christopher Gilbert

Senior Design Project For Engineers

Overview

This project belongs to the Chick-fil-A Supply Chain Innovation Team. This team has designed a new packaging product, which breaks down their current packing product into smaller load units. The Atlanta Sauce test was the first live implementation of this new product, the inner pack. The Supply Chain Team began preparing for this test in May 2017. In this test, the team were specifically looking for product issues, benefits, product user behaviors, and areas of improvement.

Objective

The purpose of this project was to research the implementation of a new sauce packaging. During this research, the current sauce replenishment …

Ejm Chain Fall Tooling Optimization, Migual Medina, Esraa Abdulmahdi, James Algarin

Senior Design Project For Engineers

The following report describes the progress made by the EJM Chain Fall Tooling Optimization Team since the In-Progress Review. The team has finalized the facility layout design for the chain fall area including the concept of operations, functional requirements, and performance specifications. The scope of the project is completing the new procedures for reducing waste and completing the AutoCAD drawing of the final design. The team researched the objectives accomplished by the new layout design. The goal of the project is to reduce the safety hazards and increase productivity. The team shifted the focus to the salvage, recycling, and waste …

Quality Function Deployment Method And Its Application On Wearable Technology Product Development, Mir Salahuddin

LSU Master's Theses

The purpose of this thesis was to investigate consumers and product developer’s expectations of wearable technology products in the context of the Quality Function Deployment (QFD) framework. The specific objectives were to: 1) Explore the quality features that consumers consider most important when purchasing wearable technology product. 2) Explore the technical features product developers consider most important in the development of wearable technology. 3) Identify the technical features that wearable technology product developers need to focus on to meet the customer requirements.

The Qualtrix online survey system was used to collect demographic, quantitative and essay length written responses from participants. …

Ensemble Machine Learning To Predict Family Consent For Organ Donation, Md Ehsan Khan

Graduate Dissertations and Theses

There is ever increasing disparity between number of organs needed for transplantation and numbers available for donation to save lives. As a result, thousands of people die every year waiting for organs. Therefore, it is now more important than ever before to take serious actions to decrease this disparity. One way to bridge gap between organ demand and supply is to increase family consent for organ donation. This research studied the factors associated with family consent. Machine Learning approach had been used in very few literature to understand factors related to family consent. This study uses six Ensemble Machine Learning …

A Systems Analysis Of Factors Influencing Household Solar Pv Adoption In Santiago, Chile, Jeffrey P. Walters, Jessica Kaminsky, Lawrence Gottschamer

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Societal uptake of household solar photovoltaic (PV) technology is the result of a complex and interdependent array of technical, social, political and economic factors. This novel study employs a systems lens to examine both technical and non-technical barriers to renewables, with a focus on interactions that are empirically influential on PV uptake. Using local solar expert stakeholder input into a participatory systems approach, this study provides a structural analysis of factors influencing household solar adoption. The approach is applied and assessed for household solar PV systems in Santiago, Chile, to gain insight into the interconnected factors driving technology adoption. Barriers …

Improving The Truck Driver Job, Kerry Melton

Operations Management Presentations

Freight transportation has increased dramatically over the last 35 years as freight and shipment demand have expanded resulting in truck driver and equipment capacity issues and infrastructure problems. Freight transport tonnage in the U.S. is predominately truck transportation consisting of more than 70% of all freight distribution with a 25% growth expectation over the next 5 years. Within the trucking industry, over-the-road (OTR) truckload transportation consists of 50% of all truck tonnage shipped. Due to high OTR truckload demand, OTR driver capacity issues have plagued the truckload industry for years. Additionally, high OTR driver turnover and poor driver job retention …

Compressed Air Systems Evaluation And Improvement, Lukas Swoboda

Honors Theses

This project was centered on recommending a new air compressor system for the Fluid System Connectors division of Parker Hannifin in Otsego, Michigan. The recommended compressor for the plant is a 250hp variable speed drive Ingersoll Rand Compressor. It is recommended that this compressor, along with two 35hp compressors already purchased by Parker be tied together using an automated system. In addition to the compressor, a flow controller was recommended to be implemented into the system.

Given that leaks are also a problem in the system, it is recommended that the majority of air leaks in the system be fixed …

Ranking Of Human Senses In Relation To Different In-Flight Activities Contributing To The Comfort Experience Of Airplane Passengers, Joyce Bouwens, Suzanne Hiemstra-Van Mastrigt, Peter Vink

International Journal of Aviation, Aeronautics, and Aerospace

Bubb, Bengler, Grünen, and Vollrath (2015) identified six environmental comfort factors and ordered them from most important to least important (smell, light, vibrations, sound, climate and anthropometry). This paper attempts to verify whether this suggested order of comfort-related factors also applies to the expectations of aircraft passengers. For this purpose, two studies were carried out. First, a survey was conducted among 183 aircraft passengers between 19 and 64 years old. In this survey, respondents were asked to rank six comfort factors by selecting the most important factor from 15 pairs of factors (e.g. light versus smell). The respondents indicated anthropometry …

Cyclomatic Complexity Applied To Sysml Diagrams, Maliha Lubna

Research Horizons Day Posters

No abstract provided.

A Method For Robust Requirements Definition, Marc Gethers

Research Horizons Day Posters

No abstract provided.

An Analysis Of The Relationship Between Leadership Style And Lean Expressed Through Respect, Proactivity, And Innovative Work Behavior, Reiner Martens

Organization, Information and Learning Sciences ETDs

This dissertation is based on the idea that a leadership style is necessary to implement a lean culture within an organization. This research study employed a systematic literature review, from which a lean leadership model was developed. Based on the two principles of a lean organizational culture, 1. respect for people and 2. continuous improvement, three measurable variables were identified, respect, proactivity, and innovative work behavior. These three variables were connected to the lean leadership model. Leadership styles based on the full range model of leadership were used as independent variable(s). The overarching results of this study were: (1) transformational …

The Eco-Smart Can V2.0, Darack B. Nanto

Appalachian Student Research Forum

I noticed that the workers had the same itinerary when emptying trashcans, meanwhile trashcans needed urgently to be emptied. Traditionally, ETSU maintenance operate on daily routes to pick trash on designated time, regardless the level of the containers. This leads to overflown trashcan in busy areas or during rush hours in certain areas. This overflown trashcan result in an unclean environment for the community and an unpleasant look of our beautiful campus. The time, resources and labor invested in collecting the trash could be saved. Therefore, I decided to use the Internet of Things (IoT) to create a device that …

Likelihood And Cost Impact Of Engineering Change Requirements For Dod Contracts, James C. Ellis, Edward D. White, Jonathan D. Ritschel, Shawn M. Valentine, Brandon Lucas, Ian S. Cordell

Faculty Publications

Purpose: There appears to be no empirical-based method in the literature for estimating if an engineering change proposal (ECP) will occur or the dollar amount incurred. This paper aims to present an empirically based approach to address this shortfall.
Design/Methodology/Approach: Using the cost assessment data enterprise database, 533 contracts were randomly selected via a stratified sampling plan to build two regression models: one to predict the likelihood of a contract experiencing an ECP and the other to determine the expected median per cent increase in baseline contract cost if an ECP was likely. Both models adopted a stepwise approach. A …

Implementation Of 5s At A Survey Laboratory In Western Kentucky University, Mercy Akunna Ebuetse

Masters Theses & Specialist Projects

5S is a technique used alongside methodologies such as lean, total quality management and six-sigma for continuous improvement and workplace standardization. Nonetheless, despite the upsurge in the implementation of 5S by lean manufacturing facilities and other industries, educational laboratories appear to be lagging. Taking into consideration the benefits of implementing 5S within industry, it has become crucial to replicate the technique in an educational laboratory to obtain equivalent results. To upgrade educational laboratories into industrial laboratories, 5S (sort, set in order, shine, standardize, and sustain) is required to improve the laboratory’s ergonomics that subsequently increases efficiency, productivity, and lessens waste …

Implementing A Total Productive Maintenance Approach Into An Improvement At S Company, Xiaomeng Sun

Masters Theses & Specialist Projects

The study improved the overall equipment effectiveness (OEE) of machines and processes through the implementation of a total productive maintenance (TPM) approach at Company S over a three-month period. By comparing the OEE of equipment before and after the implementation of autonomous maintenance, this study concluded that autonomous maintenance improves OEE. The target of this study was one general product line at a polytetrafluoroethylene (PTFE) plant. Due to time limitations, the study only applied autonomous maintenance to operational activities. This research involved machine and processes selection, condition assessment, baseline OEE assessment, operator training, execution of autonomous maintenance, and OEE measurement. …

Assessment Of Ergonomics In Indian Dental Practice: A Workplace Analysis, Divya Gadde

Masters Theses & Specialist Projects

Dental practice requires unique working conditions such as prolonged working hours, strained body postures and laborious, high finesse dental techniques. However, it can be more efficiently performed by the application of ergonomics, rather than physically forcing the worker's body to fit the job. Posture is highly influenced by factors such as inadequate working level, incorrect patient positioning, and poor visual comfort. In order to eliminate musculoskeletal disorders it is necessary to control these and other factors, and design the human work environment to be more ergonomic. The aim of this study was to assess ergonomics within Indian dental practice and …

Repeatability Case Study Of The 3d Printer In The School Of Engineering And Applied Science Lab, Naif Faleh S. Albaiji

Masters Theses & Specialist Projects

3DP (three-dimensional printing) technologies have become more than just a tool to help companies with prototyping and designing in the pre-production stage. Some firms have already implemented 3DP technology to produce parts and end-use products. However, there are several challenges and barriers that this technology must overcome to replace traditional manufacturing methods. One of the most significant obstacles associated with 3D printing is its low level of accuracy in variable repeatability when it comes to making separate batches of the same product. There are several arguable reasons behind this variation. Some of the factors that can influence repeatability are the …

Reducing Damaged And Returned Inventory At Mds Logistics, Chris Montell, Darioush Moein, Amir Samadabadi

Senior Design Project For Engineers

MDS Logistics is a middle-man that delivers and installs appliances to multi-family complexes and neighborhoods in Georgia. One of the biggest issues that they face in day-to-day operation is damaged and returned appliances. MDS’s longest standing contract is with GE and GE has extensive records of damage that is incurred by using similar companies across the country. We will be consulting with MDS while using the data produced by GE to compare MDS with the similar companies to see where improvement can be made reasonably.

When an appliance is damaged it is brought back to MDS’s warehouse where they are …

A-Set Process Improvement, Gabriel Rubio, Davis Jackson, Christopher Olaya

Senior Design Project For Engineers

Siemens Energy offers world-class products and solutions for power generation. They help their clients worldwide to successfully operate conventional power plants by renting out their toolkits. Clients can work on anything from gas or steam turbines, generators, turbines, or even hybrid power and storage. One of Siemens’ more profitable toolkits would be the A-Set, or as the floor assemblers refer to as ‘the majors,’ which consists of two large conex containers filled with thousands of tools ready for any type of operation at power plants. By looking at how long it takes floor assemblers at the Siemens Facility in Suwanee, …

The Evaluation Of The Integration Of Sustainability In Industrial Engineering Education At Louisiana State University, Kloe’ M. Liner

Honors Capstones

No abstract provided.

Failure Analysis Of Philos Plate Construct Used For Pantalar Arthrodesis Paper Ii-Screws And Fem Simulations, Farah Hamandi, Richard T. Laughlin, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

A fractured stainless steel 3.5 mm proximal humerus internal locking system (PHILOS) plate and screws were investigated in this paper. This plate was used for ankle arthrodesis of a 68-year-old female with a right ankle deformity. Both the plate and screws were considered in this investigation. Optical and scanning electron microscopes (SEM) were used to document fracture surface characteristics, such as extensive scratching, plastic deformation, rubbed surfaces, discoloration, and pitting, along with cleavage, secondary cracking, deposits of debris, striations, and dimples. Indications of these features show that the plate failed by corrosion fatigue, however, overloading separated the screw(s) in two …

Evaluation Of The Effectiveness Of A Gaze-Based Training Intervention On Latent Hazard Anticipation Skills For Young Drivers: A Driving Simulator Study, Yusuke Yamani, Pinar Biçaksiz, Dakota B. Palmer, Nathan Hatfield, Siby Samuel

Psychology Faculty Publications

A PC-based training program (Road Awareness and Perception Training or RAPT; Pradhan et al., 2009), proven effective for improving young novice drivers' hazard anticipation skills, did not fully maximize the hazard anticipation performance of young drivers despite the use of similar anticipation scenarios in both, the training and the evaluation drives. The current driving simulator experiment examined the additive effects of expert eye movement videos following RAPT training on young drivers' hazard anticipation performance compared to video-only and RAPT-only conditions. The study employed a between-subject design in which 36 young participants (aged 18-21) were equally and randomly assigned to one …

Contextual Framework Of Communications Functions Supporting Complex System Governance, Charles Wesley Chesterman Jr.

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop a systems theory-based contextual framework of communication functions supporting complex system governance using an inductive research design. Communication, as one aspect of Management Cybernetics (communication and control for effective system organization) constructed of channels of communication, provides for the movement of information internally and externally for a system. This flow reflecting new information, decisions, questions, and intelligence is critical for viability of a system. This research looked for communication mechanisms as developed in system theory, communication theory, management theory, and organizational theory. The literature indicates the importance of communications, but a systemic …

Case Study On The Development Of Engineering Design Modification Projects For U.S. Nuclear Power Plants: A Knowledge Retention Tool In Support Of The Longevity And Resilience Of The Nuclear Power Industry, Pamela M. Torres-Jiménez

Engineering Management & Systems Engineering Theses & Dissertations

The nuclear power industry in the United States (U.S.) has gone through various changes throughout its history. Most recently, plans to grow the industry through the construction of new power plants have ceased. Because of this, the industry is at a period where the longevity and resilience of existing nuclear power plants are vital to its subsistence.

One of the ways existing nuclear power plants can assure longevity and resilience is by performing engineering design modifications efficiently and at a lower cost. Strategic plans, such as the Delivering the Nuclear Promise, can support nuclear utilities to achieve this. Another strategy …

A Cognitive Approach To Predicting Academic Success In Computing, Colby Goettel

Theses and Dissertations

This research examines the possible correlations between a computing student's learning preference and their academic success, as well as their overall satisfaction with their major. CS and IT seniors at BYU were surveyed about their learning preferences and satisfaction with their major. The research found that IT students who are more reflective in their learning preference tend to have higher grades in their major. Additionally, it found that student age and their parents' education level were significant players in their academic success. However, there were no correlations found between major satisfaction and academic performance.