Open Access. Powered by Scholars. Published by Universities.®

Operations Research, Systems Engineering and Industrial Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2016

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 91 - 120 of 455

Full-Text Articles in Operations Research, Systems Engineering and Industrial Engineering

Evaluation Of The Impact Of An Additive Manufacturing Enhanced Cubesat Architecture On The Cubesat Development Process, Rachel E. Sharples Sep 2016

Evaluation Of The Impact Of An Additive Manufacturing Enhanced Cubesat Architecture On The Cubesat Development Process, Rachel E. Sharples

Theses and Dissertations

Additive manufacturing (AM) is a fabrication method ideally suited to low-quantity, highly customized builds, leading to interest in its application to satellite development and manufacturing, where each build is unique. Due to the issues of long development schedules and high development and manufacturing costs, methods are needed in the CubeSat development process to reduce the weight and volume of subsystems and decrease integration time. The work develops an architecture for an AM-augmented CubeSat and examines the AM techniques of embedded electronics, embedded thrusters, and custom radiation-hardened materials can impact the subsystems of a CubeSat. The AM-augmented architecture shows a shift …

Go to article

An Examination Of Commercial Motor Vehicle Hours Of Service Safety Regulation, Jason R. Anderson Sep 2016

An Examination Of Commercial Motor Vehicle Hours Of Service Safety Regulation, Jason R. Anderson

Theses and Dissertations

The Federal Motor Carrier Safety Administration (FMSCA) stipulates Hours of Service (HOS) regulations in order to minimize or eliminate fatigued truck driving, a major cause of truck-related accidents. This research examines the efficacy of HOS with three unique research approaches: 1) a typology classification model to indicate differences in HOS regulation from other safety regulations, 2) an exhaustive enumeration method utilizing the theoretical foundation of perishable inventory theory, and 3) a statistical analysis on accidents caused by or involving truck drivers. This research provides insight into similar Air Force Instructions regarding flight-time restrictions for pilots, which attempt to prevent flying …

Go to article

Application Of Executable Architecture In Early Concept Evaluation Using The Dod Architecture Framework, Zhongwang Chua Sep 2016

Application Of Executable Architecture In Early Concept Evaluation Using The Dod Architecture Framework, Zhongwang Chua

Theses and Dissertations

The increasing complexity in the development of today's modern warfighting systems demands a systematic evaluation approach in the assessment of the envisaged capability and estimating the cost effectiveness, especially in the early stages of Concept Development. This research focused on the development of early Concept evaluation methodology through the use of Executable Architecture (EA) through the System Architecting process. Particularly, the methodology was applied in the assessment of a proposed Multi-tiered Unmanned Aircraft System System-of-System that is designed provide target acquisition and conduct dynamic strike on Theater Ballistic Missile launchers. Through the implementation of the evaluation methodology using dynamic modeling …

Go to article

Air Force Project Risk Management – The Impact Of Inconsistent Processes, Eric J. Perez Sep 2016

Air Force Project Risk Management – The Impact Of Inconsistent Processes, Eric J. Perez

Theses and Dissertations

On the surface, the majority of Air Force units appear to be executing some form of project risk management (PRM). Deeper investigation exposes many of the PRM practices currently in place to often be ad hoc, and as such, have the potential to poorly inform decisions when risk data is escalated to the enterprise levels of the Air Force. Resultantly, there is inconsistency between the PRM processes practiced by Air Force units. This inconsistency is an indication of risk mishandling at the project level and erroneous risk data provided at the enterprise levels of the Air Force. It may be …

Go to article

Systematic Identification Of Coordination Gaps In Pediatric Care, Diana M. Prieto, Anil Kumar, Catherine L. Kothari, Cheryl Dickson Sep 2016

Systematic Identification Of Coordination Gaps In Pediatric Care, Diana M. Prieto, Anil Kumar, Catherine L. Kothari, Cheryl Dickson

Frontiers in Public Health Services and Systems Research

In the United States, the status of coordination among pediatric care services is not well understood. Through the use of quality improvement (QI) techniques, coordination gaps were systematically identified in the interagency network of pediatric services in Kalamazoo MI. Gaps were found in transportation resources, follow-up procedures, awareness of services, interagency communication, insurance limitations, population behaviors, and resource utilization. This preliminary study reveals the need for (1) protocols for intra- and inter-agency communication, (2) mechanisms for easy and fast retrieval of pediatric resources, and (3) health information exchange.

Go to article

Environmental Efficiency Assessment Of U.S. Transport Sector: A Slack-Based Data Envelopment Analysis Approach, Yong Shin Park, Siew Hoon Lim, Gokhan Egilmez, Joseph Szmerekovsky Sep 2016

Environmental Efficiency Assessment Of U.S. Transport Sector: A Slack-Based Data Envelopment Analysis Approach, Yong Shin Park, Siew Hoon Lim, Gokhan Egilmez, Joseph Szmerekovsky

Mechanical and Industrial Engineering Faculty Publications

Sustainable transportation in the U.S. is essential for long-term economic growth and mobility, and environmental preservation. Using a non-radial slack-based measurement data envelopment analysis (SBM-DEA) model and state-level data, this study assesses the environmental efficiency of the transportation sector in the U.S. from years 2004 to 2012. In addition to environmental efficiency, carbon efficiency and potential carbon reduction were estimated for the 50 U.S. states. The findings of this study reveal that U.S. transportation sector was environmentally inefficient; U.S. states had an average transportation environmental efficiency score below 0.64. Therefore the states could substantially reduce carbon emissions to improve the …

Go to article

A Framework For Technology Transfer Potential Assessment, Judith Estep, Tugrul U. Daim Sep 2016

A Framework For Technology Transfer Potential Assessment, Judith Estep, Tugrul U. Daim

Engineering and Technology Management Faculty Publications and Presentations

This paper is motivated by a need to move research into application, specifically in the utility industry. There are many challenges facing the industry: an aging infrastructure, a growing population, and aggressive energy efficiency targets are just a few examples. Many technologies exist or are in development but the rate at which they are being adopted is slow. Despite a clear need to apply research results to the utility industry, a cursory review of how research proposals are evaluated within the utility industry confirms that technology transfer is only peripherally addressed. In addition, there is no mechanism to quantitatively assess …

Go to article

Comparative Analysis For Fuzzy Cognitive Mapping, Byung Sung Yoon, Antoine J. Jetter Sep 2016

Comparative Analysis For Fuzzy Cognitive Mapping, Byung Sung Yoon, Antoine J. Jetter

Engineering and Technology Management Faculty Publications and Presentations

Fuzzy Cognitive Mapping (FCM) is a semi-quantitative system modeling technique that is used in technology management to capture, synthesize and analyze expert and stakeholder knowledge for the purpose of technology assessment, product planning, and scenario studies. The resulting FCM models are generated in interviews, focus groups, or workshops and represent complex and dynamic systems as elements (so-called concepts) and cause-and-effect relationships. Researchers often compare FCM to investigate cognitive differences between individuals or groups, identify unique perspectives on a specific topic, or track changes in knowledge (i.e. learning). Using a variety of metrics, comparison studies investigate diverse characteristics of FCMs, such …

Go to article

Technology Planning For Emerging Business Model And Regulatory Integration: The Case Of Electric Vehicle Smart Charging, Kelly Cowan, Tugrul U. Daim Sep 2016

Technology Planning For Emerging Business Model And Regulatory Integration: The Case Of Electric Vehicle Smart Charging, Kelly Cowan, Tugrul U. Daim

Engineering and Technology Management Faculty Publications and Presentations

Smart grid has been described as the Energy Internet: Where Energy Technology meets Information Technology. The incorporation of such technology into vast existing utility infrastructures offers many advantages, including possibilities for new smart appliances, energy management systems, better integration of renewable energy, value added services, and new busiss models, both for supply-and demand-side management. This paper proposes to build upon existing roadmapping processes by considering an integrated set of factors, including policy issues, that are specifically tuned to the needs of smart grid and have not generally been considered in other types of roadmapping efforts. It will also incorporate expert …

Go to article

A Systems Engineering Approach For Plant Layout Management & Optimization, Abdulelah Saeed Algarni Sep 2016

A Systems Engineering Approach For Plant Layout Management & Optimization, Abdulelah Saeed Algarni

Theses and Dissertations

The basis of this paper was to investigate the system engineering applications on petro-chemical facilities layout designs. This work aims to facilitate and introduce the application of Facility Layout Problems to industrial case studies based on system engineering methodologies and performance measurements. Additionally, an effort was made to present a state-of-the-art literature review of industrial layout problems that exhibits scarcity of system engineering role in the design and implementations of industrial Facility Layout Problems. Facility Layout is one of the demanding large-scale optimization problems. Upon the completion of this report, we found a great sense of vitality of system engineering …

Go to article

Technology Innovations And The Financial Services Industry., Olubukola Akinniyi Akinwunmi Sep 2016

Technology Innovations And The Financial Services Industry., Olubukola Akinniyi Akinwunmi

Bullion

This article explores the future of the financial services industry in the context of new technologies. Technological innovations were reviewed and likely implications for the industry were highlighted. The article suggests that a symbiotic relationship among new and incumbent financial services providers will benefit the industry. Since technology is re-defining the financial services industry and the global financial system as undergone transformation in the last couple of decades.

Go to article

Consistency Thresholds For Hierarchical Decision Model, Mustafa S. Abbas, Dundar F. Kocaoglu Sep 2016

Consistency Thresholds For Hierarchical Decision Model, Mustafa S. Abbas, Dundar F. Kocaoglu

Engineering and Technology Management Faculty Publications and Presentations

The objective of this research is to establish consistency thresholds linked to alpha (α) levels for HDM's (Hierarchical Decision Model) judgment quantification method. Measuring consistency in order to control it is a crucial and inseparable part of any AHP/HDM experiment. The researchers on the subject recommend establishing thresholds that are statistically based on hypothesis testing, and are linked to the number of decision variables and a level. Such thresholds provide the means with which to evaluate the soundness and validity of an AHP/HDM decision. The linkage of thresholds to a levels allows the decision makers to set an appropriate inconsistency …

Go to article

Exploring The Adoption And Use Of The Smartphone Technology In Emerging Regions: Case Of Saudi Arabia, Fahad Aldhaban, Tugrul Unsal Daim, Robert R. Harmon Sep 2016

Exploring The Adoption And Use Of The Smartphone Technology In Emerging Regions: Case Of Saudi Arabia, Fahad Aldhaban, Tugrul Unsal Daim, Robert R. Harmon

Engineering and Technology Management Faculty Publications and Presentations

This paper starts with a preliminary theoretical research model which is developed based on the Unified Theory of Acceptance and Use of Technology (UTAUT). A number of qualitative methods, namely brainstorming, focus group and individual interviews, have been conducted to evaluate, select and validate the existing factors, as well as introduce new factors, to identify only the most related factors to be included in the preliminary research model. A survey questionnaire has been developed and validated to survey general users of the Smartphone in Saudi Arabia. A web-based survey has been designed and sent through email to 5,000 randomly selected …

Go to article

A Model Of Academic Community Entrepreneurship (Ace): Initiation, Innovation, And Impacts Of Picmet, Min-Seok Cha Sep 2016

A Model Of Academic Community Entrepreneurship (Ace): Initiation, Innovation, And Impacts Of Picmet, Min-Seok Cha

Engineering and Technology Management Faculty Publications and Presentations

Entrepreneurship is the process of creating problem solving system that generate knowledge and provide value. It is also seen as an innovation engine. It could be applied in many fields including academic community. This attempt of creating academic community can be view as an academic entrepreneurship. The impactful process of academic entrepreneurship is worthwhile to be noticed and shared. Because PICMET has shown a model of building a sustainable scholar community and its coordinating organization in the international level, it could be a successful case of academic community entrepreneurship (ACE) Model. ACE is focused on creating new value of academic …

Go to article

Technology Readiness, Market Readiness And The Triple Bottom Line: An Empirical Analysis Of Innovating Startups In An Incubator, Rainer Hasenauer, Andreas Gschöpf, Charles Weber Sep 2016

Technology Readiness, Market Readiness And The Triple Bottom Line: An Empirical Analysis Of Innovating Startups In An Incubator, Rainer Hasenauer, Andreas Gschöpf, Charles Weber

Engineering and Technology Management Faculty Publications and Presentations

This paper shares the experiences of INITS, a business incubator located in Vienna, Austria, which consults to startup firms in Austria and (with partners) in Europe. INITS has investigated the technology readiness levels and market readiness levels of 57 startup firms in a variety of industries, who are engaged in social or environmental entrepreneurship, where the impact motive prevails over the profit motive. Thus, INITS provides 57 longitudinal case studies of social and environmental innovation in startup firms that have gone through the complete incubation process. Thirteen of these cases underwent an 'open incubation' process developed by INITS. INITS has …

Go to article

Survey Of Value Assessment Programs Within Transportation Construction Projects In U.S, Rafaa Khalifa, Robert Stewart Sep 2016

Survey Of Value Assessment Programs Within Transportation Construction Projects In U.S, Rafaa Khalifa, Robert Stewart

Engineering and Technology Management Faculty Publications and Presentations

In order to deliver transportation project on time and within budget, project planners and decision makers need to understand the desirable outcomes of projects or programs to make intelligent decisions. In addition, they also need effective tools and techniques to guide those decisions. In development of a guide that identifies available tools and techniques to foster useable and improved practices for key stakeholders of transportation projects, this paper as a preliminary study assessed current utilization of project delivery value improvement programs such as value engineering (VE), risk analysis/management (RA/RM) and constructability reviews (CR) for transportation projects. To determine whether states …

Go to article

Managing The Ethical And Risk Implications Of Rapid Advances In Artificial Intelligence: A Literature Review, Taylor Meek, Husam Barham, Nader Beltaif, Amani Kaadoor, Tanzila Akhter Sep 2016

Managing The Ethical And Risk Implications Of Rapid Advances In Artificial Intelligence: A Literature Review, Taylor Meek, Husam Barham, Nader Beltaif, Amani Kaadoor, Tanzila Akhter

Engineering and Technology Management Faculty Publications and Presentations

The development of emergent technologies carries with it ethical issues and risks. We review ways to better manage the ethical issues and risks of one emerging technology: Artificial Intelligence (AI). Depending on how AI's development is managed, it may have beneficial and/or deleterious effects. The processing capacity of Tianhe-2, the world's fastest supercomputer, by some measures, exceeds the processing capacity of a single human brain. but at a prohibitive processing/power consumption ratio and physical size. Given the current pace of AI R&D activities, some estimates in the literature suggest that the technology could become capable of self-determination and super intelligence …

Go to article

A Hierarchical Decision Model (Hdm) For Exploring The Adoption Of Electronic Health Records, Caroline Mudavadi, Liliya Hogaboam, Tugrul Unsal Daim Sep 2016

A Hierarchical Decision Model (Hdm) For Exploring The Adoption Of Electronic Health Records, Caroline Mudavadi, Liliya Hogaboam, Tugrul Unsal Daim

Engineering and Technology Management Faculty Publications and Presentations

Information systems have been making a noticeable entrance in the healthcare, although their adoption has been slow. This paper examines the factors influencing the electronic healthcare records (EHR) adoption by modeling behavioral intention of physicians towards EHR adoption. Three main criteria: perceived usefulness, perceived ease of use and external factors along with the subcriteria, are studied by the authors. Analytical hierarchical process (AHP) model is tested through the expert judgment quantification of physicians in Portland metro area. The results showed high importance of the Perceived Ease of Use criteria on the behavioral intensions of physicians towards EHR adoption. Search ability …

Go to article

Impacts To Productivity In Metal Stud Framing, And The Hanging And Finishing Of Gypsum Drywall, Gerald H. Williams Jr., Timothy R. Anderson Sep 2016

Impacts To Productivity In Metal Stud Framing, And The Hanging And Finishing Of Gypsum Drywall, Gerald H. Williams Jr., Timothy R. Anderson

Engineering and Technology Management Faculty Publications and Presentations

Stud Framing, Drywall, and Tape and Finishing trade-work is a major component of every building project. Labor productivity is the largest single variable affecting of the Framing and Drywall contractors' cost of performance. In spite of these facts, no major study of labor productivity in this major construction trade has previously been done. This study was undertaken to fill this gap in the literature; specifically to investigate external impacts to labor productivity in this construction sector. The study measured the impact of thirty-eight (38) variables on 226 separate projects. The study found that poor quality design documents, unexpected labor congestion, …

Go to article

Technology Evaluation Of Robotics Technology In Power Industry, Byung Sung Yoon, Judith Estep, Terry Oliver, Robert Grizzi Sep 2016

Technology Evaluation Of Robotics Technology In Power Industry, Byung Sung Yoon, Judith Estep, Terry Oliver, Robert Grizzi

Engineering and Technology Management Faculty Publications and Presentations

The electric power utilities as important social infrastructures should be operated stably without any failure in supply of electricity. For stable operation, it is necessary to input huge amount of resource and investment throughout power generation, transmission and distribution facilities. Particularly, constant inspection and maintenance of the facilities requires highly skilled manpower and advanced technologies. In spite of endless efforts, the electric power industry is facing serious challenges from social, economic and environmental problems. In this regard, a number of robotic systems have been tested and applied for inspection and maintenance in nuclear power plants and high voltage power transmission …

Go to article

Understanding Risk Perception Using Fuzzy Cognitive Maps, Pei Zhang, Antoine J. Jetter Sep 2016

Understanding Risk Perception Using Fuzzy Cognitive Maps, Pei Zhang, Antoine J. Jetter

Engineering and Technology Management Faculty Publications and Presentations

When making decision that can have far-researching effects, such as governmental policies or decisions on new technologies, decision-makers use their understanding of the risks that are associated with their choices to guide their decisions. Measuring how people perceive risks can be helpful for understanding and possibly improving the decision-making process. Building on a review of existing methods for investigating risk perceptions, this paper suggests Fuzzy Cognitive Maps (FCM) as a method for investigating differences in risk perception among stakeholders and stakeholder groups. The approach is illustrated with an example of wildfire risk perceptions. Results suggest that FCM can contribute to …

Go to article

Decision-Making Model On Dslr Camera Choosing For 18 ∼ 30 Years Old College Students, Pei Zhang, Chih-Jen Yu, Jiabing Zhang, Monticha Khammuang, Dundar F. Kocaoglu Sep 2016

Decision-Making Model On Dslr Camera Choosing For 18 ∼ 30 Years Old College Students, Pei Zhang, Chih-Jen Yu, Jiabing Zhang, Monticha Khammuang, Dundar F. Kocaoglu

Engineering and Technology Management Faculty Publications and Presentations

A 3-level Hierarchical Decision Model (HDM) 111 is established in this paper to help 18-30 year old college students make a decision of choosing a desirable digital single-lens reflex camera (DSLR) from 5 famous DSLR camera manufacturers. The HDM has been utilized in this paper, because it measures the relative contribution of each criterion to the final decision based on quantified judgments of the respondents. A group of experts, consists of 12 male and 9 female provided their quantified judgements with different weighted value in each element at each level of the decision hierarchy. By applying desirable functions, there was …

Go to article

Improving Carbon Efficiency Through Container Size Optimization And Shipment Consolidation, Nang Laik Ma, Kar Way Tan, Edwin Lik Ming Chong Sep 2016

Improving Carbon Efficiency Through Container Size Optimization And Shipment Consolidation, Nang Laik Ma, Kar Way Tan, Edwin Lik Ming Chong

Research Collection School Of Computing and Information Systems

Purpose: Many manufacturing companies that ship goods through full container loads found themselves under-utilizing the containers and resulting in higher carbon footprint per volume shipment. One of the reasons is the choice of non-ideal container sizes for their shipments. Consolidation fills up the containers more efficiently that reduces the overall carbon footprint. The objective of this paper is to support decisions on selection of appropriate combination of container sizes and shipment consolidation for a manufacturing company. We develop two-steps model which first takes the volumes to be shipped as an input and provide the combination of container sizes required; then …

Go to article

Performance Prediction Of Drying Process In Residential Clothes Dryer Using Multiphysics Modeling And Simulation, Molly Shircliff Aug 2016

Performance Prediction Of Drying Process In Residential Clothes Dryer Using Multiphysics Modeling And Simulation, Molly Shircliff

Mahurin Honors College Capstone Experience/Thesis Projects

The clothes dryer is the second highest consumer of electricity among household appliances in the U.S. However, few improvements have been made to the overall design of dryers since the 1970s. For this reason, energy efficiency research in domestic clothes dryers is a promising topic. In order to effectively and accurately research and test efficiency and design of new prototypes of the dryer, a mathematical model of the air-vented, residential dryer was created in the Energy Systems Lab at Western Kentucky University, using the text-based environment of MATLAB. This model was developed and simulated using numerical solver techniques. This model …

Go to article

Temporal Variations Of Water Productivity In Irrigated Corn: An Analysis Of Factors Influencing Yield And Water Use Across Central Nebraska, Tony Carr, Haishun Yang, Chittaranjan Ray Aug 2016

Temporal Variations Of Water Productivity In Irrigated Corn: An Analysis Of Factors Influencing Yield And Water Use Across Central Nebraska, Tony Carr, Haishun Yang, Chittaranjan Ray

Nebraska Water Center: Faculty Publications

Water Productivity (WP) of a crop defines the relationship between the economic or physical yield of the crop and its water use. With this concept it is possible to identify disproportionate water use or water-limited yield gaps and thereby support improvements in agricultural water management. However, too often important qualitative and quantitative environmental factors are not part of aWP analysis and therefore neglect the aspect of maintaining a sustainable agricultural system. In this study, we examine both the physical and economic WP in perspective with temporally changing environmental conditions. The physical WP analysis was performed by comparing simulated maximum attainable …

Go to article

An Engineering Approach To Industrial Research And Development Of Pillows, Wesley Patterson Aug 2016

An Engineering Approach To Industrial Research And Development Of Pillows, Wesley Patterson

Mahurin Honors College Capstone Experience/Thesis Projects

Comfort during sleep, though taken for granted, involves a great amount of research and engineering. Few give it a second thought, but nearly one-third of a person’s life is spent with their head on a pillow, thus making them a point for increased quality. Having been approached by a tier-1 bedding manufacturer, a team of both mechanical and electrical engineers was been tasked with the goal of creating a valid research tool that the customer, Tempur-Sealy, will utilize in the company’s research and development of high-end pillows. The team sought to tackle this project utilizing tools and knowledge gained throughout …

Go to article

Research On Navigation Guarantee Measures Of Modified Dan’Gan Waterway Routeing System, Peng Chang Aug 2016

Research On Navigation Guarantee Measures Of Modified Dan’Gan Waterway Routeing System, Peng Chang

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Go to article

Effects Of Early Exposure To Sign Language On The Biomechanics Of Interpreting, Abigail Donner, Matthew Marshall, Jacqueline Mozrall Aug 2016

Effects Of Early Exposure To Sign Language On The Biomechanics Of Interpreting, Abigail Donner, Matthew Marshall, Jacqueline Mozrall

Journal of Interpretation

Sign language interpreters are routinely exposed to the high physical and cognitive demands inherent to the profession. Unfortunately, many interpreters suffer from musculoskeletal disorders as a result of this exposure. There are a myriad of factors that can contribute to the development of a musculoskeletal disorder, but many of these are not under the control of the interpreter. However, individual technique is something that affects upper extremity biomechanics and is something that an interpreter can regulate. Research with musicians has demonstrated that early exposure to musical technique can lead to the development of a technique that is more biomechanically efficient …

Go to article

Variety And Volume Dynamic Management For Value Creation In Changeable Manufacturing Systems, Ahmed Deif, Hoda A. Elmaraghy Aug 2016

Variety And Volume Dynamic Management For Value Creation In Changeable Manufacturing Systems, Ahmed Deif, Hoda A. Elmaraghy

Industrial Technology and Packaging

In today’s uncertain market and continuously evolving technology, managing manufacturing systems are more complex than ever. This paper studies the dynamics of managing variety and volume to enhance value creation in manufacturers implementing system-level advanced and automated manufacturing technology (AAMT). The demand is composed of heterogeneous customers who make purchasing decisions depending on the variety levels and lead times of the firm’s product offerings. The cost structure adopted calculates profit as the difference between customer value creation rate (VCR) and costs associated with the process of creating this value. Reported results contribute to the variety and volume management literature by …

Go to article

Variety And Volume Dynamic Management For Value Creation In Changeable Manufacturing Systems, Ahmed M. Deif, Hoda A. Elmaraghy Aug 2016

Variety And Volume Dynamic Management For Value Creation In Changeable Manufacturing Systems, Ahmed M. Deif, Hoda A. Elmaraghy

Industrial Technology and Packaging

In today’s uncertain market and continuously evolving technology, managing manufacturing systems are more complex than ever. This paper studies the dynamics of managing variety and volume to enhance value creation in manufacturers implementing system-level advanced and automated manufacturing technology (AAMT). The demand is composed of heterogeneous customers who make purchasing decisions depending on the variety levels and lead times of the firm’s product offerings. The cost structure adopted calculates profit as the difference between customer value creation rate (VCR) and costs associated with the process of creating this value. Reported results contribute to the variety and volume management literature by …

Go to article

First Prev Next Last