Operations Research, Systems Engineering and Industrial Engineering Commons^™

Monte Carlo Algorithm To Study Performance Parameters Of Shuttle Systems, Wolfgang Trummer, Dirk Jodin

14th IMHRC Proceedings (Karlsruhe, Germany – 2016)

Shuttle systems provide alternative solutions in storage technology. Ma-terial flow analyses of these systems are extensive due to complex interac-tion of several shuttles and lift elements. Besides classic cycle time calcu-lation, it also requires advanced analyzing methods. At the Institute of Logistics Engineering (ITL), Graz University of Technology, an innovative, software-based approach has been developed to investigate the performance of shuttle systems. This approach is based on the Monte Carlo method. The software tool takes into account a variety of different systems and operating parameters to reflect operative behavior of shuttle systems.

A Meta-Architecture Analysis For A Coevolved System-Of-Systems, George Anthony Muller Iv

Masters Theses

"Modern engineered systems are becoming increasingly complex. This is driven in part by an increase in the use of systems-of-systems and network-centric concepts to improve system performance. The growth of systems-of-systems allows stakeholders to achieve improved performance, but also presents new challenges due to increased complexity. These challenges include managing the integration of asynchronously developed systems and assessing SoS performance in uncertain environments.

Many modern systems-of-systems must adapt to operating environment changes to maintain or improve performance. Coevolution is the result of the system and the environment adapting to changes in each other to obtain a performance advantage. The complexity …

Analysis Of Va Sacramento Medical Center Capacity Using Discrete Event Simulation, Tatiana Alejandra Cardona

Masters Theses

"The development of simulation models continues to provide effective solutions to a wide range of problems in healthcare systems. In the research presented within this thesis is the development of a representative and validated discrete event simulation model for the purpose of evaluating additional capacity. The study consists of a detailed exploratory analysis, verification and validation tests of the simulation results, and a thorough design of experiments. The exploratory analysis consisted of developing simulation models that provide similar characteristics found in the data. The design of experiments consisted of generating scenarios of various bed additions in the hospital units of …

Data Analysis For Driving Pattern Identification And Driver's Behavior Modeling In A Freeway Work Zone, Hari Narayanan Vijaya Raghavan Nadathur

Masters Theses

"A variety of methods are used by Departments of Transportation (DOT) for informing drivers about upcoming work zones. One such method is work zone signage configuration. Signage plays an important role in work zones to provide guidance to drivers when conditions on the road vary from normal. Therefore, it is necessary to evaluate the effectiveness of different configurations, by law, before implementation of new signage designs that deviate from the national standards.

The Manual on Uniform Traffic Control Devices (MUTCD) is a compilation of national standards for all traffic control devices, including road markings, highway signs, and traffic signals. In …

Process Improvement By Lean Thinking In Trucking Industry, Abhiram Reddy Ramasahayam

All Graduate Theses, Dissertations, and Other Capstone Projects

Manufacturing industries with complex production systems are struggling with designing optimal process to increase throughput. Companies will require high amount of labor and process improvement resources to sustain growth and delivery quality products to its customers. A chain of value added activities when designed and deployed with help of lean based methodologies can create high efficiency process. In this paper we have studies and implemented value added process based on the lean manufacturing methodologies which was adapted on the shop floor.

In many traditional truck body production industries have facing many problems like low production rate, big lead times, material …

It Governance-An Integrated Framework And Roadmap: How To Plan, Deploy And Sustain For Improved Effectiveness, Gad J. Selig

Journal of International Technology and Information Management

The issues, opportunities and challenges of effectively managing and governing an organization’s Information Technology (IT) demands, investments and resources has become a major concern of the Board and executive management in enterprises on a global basis. A rapidly growing number of organizations have become increasingly dependent on a broad array of technologies to manage and grow their businesses. IT is an integral part of most organizations today and will certainly become more critical in the future. This paper proposes a comprehensive and integrated IT governance framework and roadmap which identifies the appropriate current and emerging best practices methodologies for each …

Usability Test Of Personality Type Within A Roommate Matching Website: A Case Study, Mrinalini Shekhawat, Shilpa Deshmukh, Gabriel Monroy, Anupriya Tiwari, Xiaoyun He, Heechang Shin, Yuan Hong, Haibing Lu

Journal of International Technology and Information Management

We designed and built a roommate matching website, exclusively for students, which allow students to have a central point in which they can meet credible roommate candidates, search for verified housing, and easily reach out to these individuals to further their relationship, and eventually share living space. Our website aims to allow a user to search for compatible roommates not just by living habits, but by tying in the personality of candidates in reference to their own personality type. This type of personality matching in conjunction with a standard behavioral survey is the basis of the algorithm used for roommate …

Table Of Contents

Journal of International Technology and Information Management

Table of Contents for Volume 25 Number 4

Conceptual Models On The Effectiveness Of E-Marketing Strategies In Engaging Consumers, Cheristena Bolos, Efosa C. Idemudia, Phoebe Mai, Mahesh Rasinghani, Shelley Smith

Journal of International Technology and Information Management

Effective marketing has always been an important factor in business success. Without the ability to identify customers and convince them to purchase the product or service being offered, businesses would not survive. Recent advancements in technology have given rise to new opportunities to engage customers through the use of electronic marketing (e-marketing). E- marketing draws from traditional marketing principles, while also expanding the types of strategies available to companies. Websites, social media, and online marketplaces are just some examples of how businesses are leveraging e-marketing approaches to connect with potential customers. In formulating sound e-marketing strategies, it is important for …

Healthcare System-Use Behavior: A Systematic Review Of Its Determinants, Jiming Wu

Journal of International Technology and Information Management

To understand patient and physician behavior, researchers have investigated the determinants of using healthcare information systems. Although this stream of research has produced important findings, it has yet to appreciably advance our understanding of system-use behavior in healthcare. To fill this gap, the current paper employs a systematic review to synthesize past research, reveal the key determinants of healthcare system usage, and illuminate a deeper understanding of the topic. This study thus helps healthcare researchers expand their baseline knowledge of these core determinants and conduct more fruitful future research on system-use behavior in healthcare.

Modeling Of Selection Of Supply Sources For Hospitals, Siva Raghava Sai Rohith Valiveti

Graduate Dissertations and Theses

Most of the hospitals in the USA carry out their purchasing of supplies, including pharmaceuticals, through Group Purchasing Organizations (GPO). GPO is an organization, which aggregates procuring volumes of their member hospitals and negotiates low prices from manufacturers or vendors. According to 2013 statistics, 98% of hospitals in U.S. are purchasing their bulk health care products through GPOs, and it saves U.S. health care industry approximately $36 billion annually. Through these hospitals enjoy advantages by purchasing through their GPOs, there are some disadvantages such as paying membership fees to their GPOs, restricting the purchasing power of the hospitals outside their …

Design Of Experiments-Based Scara Robot Parameter Evaluation For Embedding Electronics Into 3d Print, Sreekara Charith Boppana

Open Access Theses & Dissertations

Additive manufacturing processes combined with enhanced technologies for electronics production enables a highly flexible manufacturing of personalized 3D electronic devices. Due to the enormous progress within the last years, these technologies made their way from prototyping towards manufacturing. The growing request for products manufactured in batch size, making use of a robot to incorporate the electronic components necessary to make functional 3-Dimensional-Structural Electronics will extend the mass production possibilities. There is significant interest in automation of a process is which parameters are influential in the occurrence of assembly defects and which adjustments should be made to those variables to reduce …

Applications Of Simulation And Optimization Techniques In Optimizing Room And Pillar Mining Systems, Angelina Konadu Anani

Doctoral Dissertations

"The goal of this research was to apply simulation and optimization techniques in solving mine design and production sequencing problems in room and pillar mines (R&P). The specific objectives were to: (1) apply Discrete Event Simulation (DES) to determine the optimal width of coal R&P panels under specific mining conditions; (2) investigate if the shuttle car fleet size used to mine a particular panel width is optimal in different segments of the panel; (3) test the hypothesis that binary integer linear programming (BILP) can be used to account for mining risk in R&P long range mine production sequencing; and (4) …

Post-Disaster Supply Chain Interdependent Critical Infrastructure System Restoration: A Review Of Data Necessary And Available For Modeling, Varun Ramachandran, Suzanna Long, Tom Shoberg, Steven Corns, Hector J. Carlo

Engineering Management and Systems Engineering Faculty Research & Creative Works

The majority of restoration strategies in the wake of large-scale disasters have focused on short-term emergency response solutions. Few consider medium- to long-term restoration strategies to reconnect urban areas to national supply chain interdependent critical infrastructure systems (SCICI). These SCICI promote the effective flow of goods, services, and information vital to the economic vitality of an urban environment. To re-establish the connectivity that has been broken during a disaster between the different SCICI, relationships between these systems must be identified, formulated, and added to a common framework to form a system-level restoration plan. To accomplish this goal, a considerable collection …

Investing In Least Developed Countries: The Aynak Mine Project, Roosevelt Barfield

Walden Dissertations and Doctoral Studies

The rise of market globalization creates challenges for business executives seeking to pursue foreign direct investment (FDI) in least developed countries (LDC), such as Afghanistan. Multinational corporate (MNC) executives need strategies that will improve the timely delivery of minerals for mining projects in LDCs. Guided by the force field analysis theory, the purpose of this holistic, single-case study was to explore the strategies that 5 MNC executives in Beijing, China, used to improve the timely delivery of minerals associated with the Aynak copper mine project in Afghanistan. Semistructured interviews were used to elicit detailed narratives from MNC executives about their …

Exploring Maintenance And Facility Operations Strategies For California Community Colleges, Virginia Parras Grande

Walden Dissertations and Doctoral Studies

California community college leaders are looking for strategies to sustain facilities and maintenance operations because the governor only approved the allocation of $87.5 million in the 2014-2015 Budget Act for facilities maintenance operations. Guided by the change and strategy theories, the purpose of this multicase study was to explore the strategies that a select group of college leaders have used to sustain or improve their facilities maintenance operations. The data collection process included a review of college planning documents and semistructured interviews with 10 senior administrators from 3 large California community colleges who have used strategies to address sustaining or …

Electronic Warfare Receiver Resource Management And Optimization, William Metz

Walden Dissertations and Doctoral Studies

Optimization of electronic warfare (EW) receiver scan strategies is critical to improving the probability of surviving military missions in hostile environments. The problem is that the limited understanding of how dynamic variations in radar and EW receiver characteristics has influenced the response time to detect enemy threats. The dependent variable was the EW receiver response time and the 4 independent variables were EW receiver revisit interval, EW receiver dwell time, radar scan time, and radar illumination time. Previous researchers have not explained how dynamic variations of independent variables affected response time. The purpose of this experimental study was to develop …

Investing In Least Developed Countries: The Aynak Copper Mine Project, Roosevelt Barfield

Walden Dissertations and Doctoral Studies

The rise of market globalization creates challenges for business executives seeking to pursue foreign direct investment (FDI) in least developed countries (LDC), such as Afghanistan. Multinational corporate (MNC) executives need strategies that will improve the timely delivery of minerals for mining projects in LDCs. Guided by the force field analysis theory, the purpose of this holistic, single-case study was to explore the strategy that 5 MNC executives in Beijing, China, used to improve the timely delivery of minerals associated with the Aynak copper mine project in Afghanistan. Semistructured interviews were used to elicit detailed narratives from MNC executives about their …

Strategies To Improve Data Quality For Forecasting Repairable Spare Parts, Uyi Harrison Eguasa

Walden Dissertations and Doctoral Studies

Poor input data quality used in repairable spare parts forecasting by aerospace small and midsize enterprises (SME) suppliers results in poor inventory practices that manifest into higher costs and critical supply shortage risks. Guided by the data quality management (DQM) theory as the conceptual framework, the purpose of this exploratory multiple case study was to identify the key strategies that the aerospace SME repairable spares suppliers use to maximize their input data quality used in forecasting repairable spare parts. The multiple case study comprised of a census sample of 6 forecasting business leaders from aerospace SME repairable spares suppliers located …

Improving Machine Changeover/Setup Times By Increasing U.S. Manufacturers' Knowledge Of 5s, Nicole Schra-Martin

Walden Dissertations and Doctoral Studies

The 5S process is one of the techniques born out of Japanese manufacturing. Ohno, the developer of 5S, found that when manufacturing waste is eliminated, costs are reduced and profits increase. This is the bases of 5S and this research. The cost of U.S. manufactured products is higher compared to the cost of products from other global manufacturers that use 5S. This study was conducted to determine if implementing 5S in U.S. manufacturing could change U.S. manufacturing cost and if using 5S could impact U.S. manufacturing. The research questions focused on the relationship between 5S and changeover/setup times on production …

Approximation For Single-Channel Multi-Server Queues And Queuing Networks With Generally Distributed Inter-Arrival And Service Times, Carlos Roberto Chaves

Doctoral Dissertations

"This dissertation is divided into two papers. The first paper is related to developing a closed-form approximation for single-channel multiple-server queues with generally distributed inter-arrival and service times, which are often found in numerous settings, e.g., airports and manufacturing systems. Unfortunately, exact models for such systems require distributions for the underlying random variables. Further, data for fitting distributions is sometimes not available, and one only has access to means and variances of the underlying input random variables. Under heavy traffic, excellent approximations already exist for this purpose. In the first paper, a new approximation method for medium traffic is presented. …

A Domain Independent Method To Assess System Of System Meta-Architectures Using Domain Specific Fuzzy Information, Louis Edward Pape Ii

Doctoral Dissertations

"This research proposes a domain independent method to build and assess systems of systems (SoS) architecture models. A simplified meta-architecture containing each component system's participation and a first order, binary, system-to-system interface is proposed. The method describes how to elicit desired SoS attributes from stakeholders. Measures of the attributes depend on systems' participation and interfaces, that is, on the SoS architecture. The goal is to model a realizable SoS configuration, optimized over multiple attributes. Key attribute measures are combined in a fuzzy inference system to assess an overall fitness measure for any SoS in the meta-architecture. A genetic algorithm is …

Multi-Level Evolutionary Algorithms Resource Allocation Utilizing Model-Based Systems Engineering, Bhanuchander Reddy Poreddy

Doctoral Dissertations

"This research presents an innovative approach to solve the resource allocation problems using Multi-level Evolutionary Algorithms. Evolutionary Algorithms are used to solve resource allocation problems in different domains and their results are then incorporated into a higher level system solution using another Evolutionary Algorithm to solve base camp planning problems currently faced by the U.S. Department of Defense.

Two models are introduced to solve two domain specific models: a logistics model and a power model. The logistic model evaluates routes for logistics vehicles on a daily basis with a goal of reducing fuel usage by delivery trucks. The evaluation includes …

Performance Based Contracting For The Manufacturing Industry By Using Integrated Platform And Dynamic Pricing Model, Lindawati, Aldy Gunawan

Research Collection Lee Kong Chian School Of Business

Although Performance Based Contracting (PBC) concept is not totally new, the PBC adaptation in Industrial Machinery and Components (IMC) manufacturing, which produces high-value and long life machineries, is rather slow and it is done with extra caution. Three main concerns for manufacturers to implement PBC are the investment cost, the maintenance cost and possible revenue loss. To handle these concerns and accelerate the PBC implementation, we propose an integrated platform that consists of three components: dynamic pricing, sensor data feeding and machinery monitoring. We model the dynamic pricing as an optimization problem and propose Genetic Algorithm to solve the problem. …

การลดของเสียในกระบวนการผลิตอุปกรณ์ส่งและรับสัญญาณ, กนกวรรณ บุญฤทธิ์ศักดิ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อลดปริมาณของเสียอุปกรณ์ส่งและรับสัญญาณทางแสงที่เกิดจากค่าแรงเฉือนของการยึดติดระหว่างชิ้นส่วนเลนส์บนแผ่นประกอบวงจรไฟฟ้าชนิดยืดหยุ่น (FPCBA: Flexible Printed Circuit Board Assembly) ซึ่งมีกระบวนการผลิตเริ่มจาก (1) นำแผ่นประกอบวงจรไฟฟ้าชนิดยืดหยุ่น (FPCBA) ที่ผ่านการประกอบวงจรอิเล็กทรอนิกส์แล้วมาทำความสะอาด (2) หยอดกาวชนิด Urethane Acrylate (UA) จำนวน 8 ตำแหน่งบนแผ่น FPCBA (3) ยิงและอบด้วยแสงยูวี (4) หยอดกาวชนิดEpoxyสีดำ (5) อบด้วยความร้อน ดำเนินการวิเคราะห์หาสาเหตุโดย (1) ศึกษาความสัมพันธ์ระหว่างค่าแรงเฉือนที่ได้กับจำนวนการเกิดสีขาวขุ่นของกาวUA บนแผ่น FPCBA (2) ตรวจสอบลักษณะข้อบกพร่องของการยึดติดกาวด้วยกล้องจุลทรรศน์เล็กตรอนแบบส่องกราด (3) วิเคราะห์องค์ประกอบของชนิดคราบกาวและตรวจหาหมู่ฟังก์ชันด้วยเครื่อง FTIR (Fourier Transform Infrared Spectrometer) (4) วิเคราะห์หาขั้นตอนที่ทำให้เกิดของเสีย โดยพิจารณาจากขั้นตอนท้ายไปหน้า (5) ดำเนินการปรับปรุง ผลการศึกษาพบว่า 1) ค่าแรงเฉือนมีค่าลดลงเมื่อมีจำนวนตำแหน่งของกาวUA เปลี่ยนสีจากใสเป็นขาวขุ่นมากขึ้น 2) ลักษณะของเสียกาวUAขาวขุ่นเกิดขึ้นที่ขั้นตอนการทำความสะอาด โดยวิธีทำความสะอาดของพนักงานมีอิทธิพลมากที่สุด ซึ่งลักษณะของเสียกาวUA ขาวขุ่นเกิดจากกาวUA ที่ไม่ยึดติดบน FPCBA ซึ่งเกิดจากการทำความสะอาดที่ไม่เพียงพอ 3) ระยะทางในการทำความสะอาดต่อก้านสำลีและการทำซ้ำที่ใช้เช็ดทำความสะอาด ส่งผลต่อการเกิดกาวUAขาวขุ่น 4) การใช้สารระเหยทำความสะอาดชิ้นงานชนิด IPA (Isopropyl Alcohol) ที่มีจุดเดือด 82.6°C ซึ่งใกล้เคียงกับอุณหภูมิที่ใช้ในขั้นตอนการอบชิ้นงานเท่ากับ90±5°C ซึ่งเป็นขั้นตอนสุดท้าย เป็นสาเหตุให้กาวUA เปลี่ยนสีจากใสเป็นขาวขุ่น เนื่องจากไอระเหยที่ไล่ออกไม่หมด 5) การใช้สารระเหยชนิดเมธนอล (Methanol) ที่มีจุดเดือด 64.7°C ทดแทน IPA พบว่าของเสียจากกาวUA ขาวขุ่นลดลงจากเดิมก่อนศึกษา 33% เป็น 7% และไม่เกิดกาวขาวขุ่นอีกเลย ตามลำดับ

A Novel Approach To Control Corrosion Behaviour On Bio Materials Using Taguchi Method (Design Of Experiments), Sai Dhiresh Kilari

Open Access Theses & Dissertations

In the present work, the Taguchi method, from the design of experiment (DOE) has been used to optimize the dip testing method to test the corrosion resistance of bio degradable materials such as PLA (Polylactic acid)and PCL (Polycaprolactone). A L9 (9) orthogonal array of Taguchi design was used, which involves nine experiments for three parameters (pH, sample, temperature) with three levels was used. Corrosion resistance in various pH change of HCL solution was evaluated by dip tests at various temperatures. Analysis of variance (ANOVA) is performed on the obtained measured data and S/N (signal to noise) ratios. The lower the …

Enhancing Surface Finish Of Fused Deposition Modeling Parts Through Targeted Chemicals And Design Of Experiments, Saurabh Nayyar Nayyar

Open Access Theses & Dissertations

Fused Deposition Modeling (FDM) is one of the most popular rapid prototyping (RP) technologies due to its low operational cost, high fabrication speed, and range of applications served. However, FDM fabricated parts generally have poor surface finish quality which have limited their utilization in end-use applications. To enhance surface quality of FDM materials, several researchers have regulated key process parameters using the FDM material, Acrylonitrile Butadiene Styrene (ABS), with varying results. The main goal of this research is to investigate the effects of a post-fabrication chemical treatment process on the surface roughness for FDM parts of the FDM material ULTEM. …

Complex Adaptive Behavior: Pragmatic Idealism, Mustafa Canan, Andres Sousa-Poza

Engineering Management & Systems Engineering Faculty Publications

The introduction of new concepts is a driver of organizational evolution and transformation. A newly introduced concept can introduce new meaning that is disparate to existing understanding. A new concept may also be interpreted in multiple ways, thereby introducing several disparate meanings. The disparity is resolved through adaptation. The disparity introduces complex adaptive behavior to the organization, requiring suitable changes to its management and design. The development of corresponding doctrine for new concepts, and training for the organization's constituents become indispensable. In so doing, constituents can be involved in the adaptation process through direct participation, and thereby include the cognitive …

Modeling Social, Economic, Technical & Environmental Components In An Energy System, Ange-Lionel Toba, Mamadou Seck

Engineering Management & Systems Engineering Faculty Publications

Energy system models have become the main supporting tool for energy policy. Modern challenges in energy policy require energy systems models that integrate technical, environmental and societal aspects of the energy systems. In this paper, we introduce a conceptual model for an energy system model that specifies the relationships between social, technical, environmental, and economic aspects of an energy system. This conceptual model presented in the IDEF0 language will serve as a basis for a computational energy systems model. © 2016 The Authors.

Energy Sustainability Of Turkey In The Case Of Lng, Omer Ilker Poyraz, Omer Keskin, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

Energy is both vital and strategic element for a nation to sustain its fundamental activities like security, logistics, heating, etc. Countries sustain their energy demands through internal or external sources. In the case of not being able to maintain energy demands from their internal sources, they would need to import their requirements. Whenever they need to buy raw materials, they have to build terminals to process the raw material into the required form. The dependency on the imports may cause the importing country to weaken its advantage in international conflicts, unemployment, and welfare. Therefore, countries aim to mitigate dependence to …