Operations Research, Systems Engineering and Industrial Engineering Commons^™

Service Dependency Analysis Via Tcp/Udp Port Tracing, John K. Clawson

Theses and Dissertations

Enterprise networks are traditionally mapped via layers two or three, providing a view of what devices are connected to different parts of the network infrastructure. A method was developed to map connections at layer four, providing a view of interconnected systems and services instead of network infrastructure. This data was graphed and displayed in a web application. The information proved beneficial in identifying connections between systems or imbalanced clusters when troubleshooting problems with enterprise applications.

Solar Cal Poly Active Hvac Project, James Cornish, Jake Cosmo, Patrick Weston

Mechanical Engineering

For this project, the goal was to conceptualize, design, test, and implement an active HVAC system to be used in the Solar Cal Poly house competing in the Department of Energy’s 2015 Solar Decathlon. With many house iterations, it was decided to use a split system with an outdoor heat pump and indoor air handler, paired with a HRV for ventilation. Through system modeling using Design Builder and Energy Pro 6.5, the cooling load of the house was determined along with the cooling schedule. The foreseen safety precautions and limited construction time guided the entire project, along with the active …

Retail Precinct Management: A Case Of Commercial Decentralization In Singapore, Robert De Souza, Hoong Chuin Lau, Mark Goh, Lindawati, Wee-Siong Ng, Puay-Siew Tan

Research Collection School Of Computing and Information Systems

The synchronized last mile logistics concept seeks to address, through coordinated collaboration, several challenges that hinder reliability, cost efficiency, effective resource planning, scheduling and utilization; and increasingly, sustainability objectives. Subsequently, the meeting of service level and contractual commitments are competitively impacted with any loss of efficiency. These challenges, against a backdrop of Singapore, can essentially be addressed in selected industry sectors through a better understanding of logistics structures; innovative supply chain designs and coordination of services, operations and processes coupled with concerted policies and supply chain strategies.

Don't Go Chasing Big Waterfalls, William "Ike" Eisenhauer

Engineering and Technology Management Faculty Publications and Presentations

The article focuses on the importance of simpler health systems in the U.S. Topics discussed include success of simple systems as they are well-understood, improvement of simple systems by coupling them together, handling more patient cases by larger systems by the medical laboratory technicians giving complicated results and designing simple systems by health system engineers to deal with fewer problematic cases of patients with more efficacy.

Friction Bit Joining Of Dissimilar Combinations Of Dp 980 Steel And Aa 7075, Rebecca Hilary Peterson

Theses and Dissertations

Friction Bit Joining (FBJ) is a new technology that allows lightweight metals to be joined to advanced high-strength steels (AHSS). Joining of dissimilar metals is especially beneficial to the automotive industry because of the desire to use materials such as aluminum and AHSS in order to reduce weight and increase fuel efficiency. In this study, FBJ was used to join 7075 aluminum and DP980 ultra-high-strength steel. FBJ is a two-stage process using a consumable bit. In the first stage, the bit cuts through the top material (aluminum), and in the second stage the bit is friction welded to the base …

Lessons Learned From A Simulation Project In Construction Education, Saeed Rokooei, James D. Goedert

Department of Construction Engineering and Management: Faculty Publications

Virtual Interactive Construction Education (VICE) is a simulation designed for construction education. The purpose was to provide the traditional lecture-based construction contents along with supplementary instructions in a project-based learning environment. Six modules were proposed as a curriculum delivery guideline including: single span bridge, residential building, light commercial, heavy commercial, highway, and segmental bridge. The single span bridge was the first module used for prototype development providing an opportunity to design, analyze, implement, and test for effectiveness. This paper describes the design steps and results of this three-year research project. VICE-Bridge required participants to sequentially order the construction activities and …

Alumnus Shares His Passion For Technology Accessibility

DePaul Magazine

Brent Shiver (CDM MS ’04, PhD ’13) attended the College of Computing and Digital Media and worked with another deaf student, Karen Alkoby (CDM MS ’99, PhD ’08), on the DePaul ASL Project, which combines computer technology and linguistics research to bridge the communication gap between the deaf and hearing worlds by working to develop a digital English-to-ASL translator. He works for IBM Accessibility as a software engineer.

A Systematic Review Of Technological Advancements To Enhance Learning, Elizabeth A. Cudney, Julie Ezzell

Engineering Management and Systems Engineering Faculty Research & Creative Works

Assessing student learning styles and incorporating thought-provoking activities has been a focus of research for years. Virtual technology and social media are transforming traditional classrooms into training spaces that can be tailored for individual learning patterns and personalized for different skill levels. These technological tools are not only revolutionizing the conventional lecture-based classroom but also beginning to incorporate options such as flipped and blended classrooms. Students in these nontraditional settings are given additional hands-on experience that allows them to become immersed in a variety of subjects. Flipped classrooms in particular use class time effectively by challenging students to prepare prior …

History-Based Controller Design And Optimization For Partially Observable Mdps, Akshat Kumar, Shlomo Zilberstein

Research Collection School Of Computing and Information Systems

Partially observable MDPs provide an elegant framework forsequential decision making. Finite-state controllers (FSCs) are often used to represent policies for infinite-horizon problems as they offer a compact representation, simple-to-execute plans, and adjustable tradeoff between computational complexityand policy size. We develop novel connections between optimizing FSCs for POMDPs and the dual linear programfor MDPs. Building on that, we present a dual mixed integer linear program (MIP) for optimizing FSCs. To assign well-defined meaning to FSC nodes as well as aid in policy search, we show how to associate history-based features with each FSC node. Using this representation, we address another challenging …

Collaborative Rescheduling Of Flights In A Single Mega-Hub Network, Sufian Ikhmeis

Dissertations

Traditionally, airlines have configured flight operations into a Hub and Spoke network design. Using connecting arrival departure waves at multiple hubs these networks achieve efficient passenger flows. Recently, there has been much growth in the development of global single mega-hub (SMH) flight networks that have a significantly different operating cost structure and schedule design. These are located primarily in the Middle East and are commonly referred to as the ME3. The traditionalist view is that SMH networks are money losers and subsidized by sovereign funds.

This research studies and analyzes SMH networks in an attempt to better understand their flight …

Preliminary Evaluation Of The Disease Surveillance System During Influenza Outbreaks Of Pandemic Scale, Eric Meisheri, Diana M. Prieto, Peter Holvenstot, Richard Vanenk

Frontiers in Public Health Services and Systems Research

In the United States it is currently unknown whether the influenza surveillance system is capable of producing timely and accurate data for case estimation during an outbreak of pandemic scale. This simulation provides a preliminary evaluation of the surveillance system’s ability to collect data and produce timely and accurate trends of cases confirmed with an influenza virus. For the evaluation, a computer-based simulation of the data-collection process was used, which was validated with real demographic and epidemiologic information. The results were analyzed to determine the most significant behavioral and operational factors influencing the data collection and to propose the exploration …

Warpage And Shape Distortion In Laser Metal Sintering, Xuan Wang

Industrial and Manufacturing Engineering

Selective Laser Sintering (SLS) is the primary method to fabricate metal and ceramic components in additive manufacturing. Due to the anisotropy of powder material, the sintering rate difference will inevitably causes shape change, distortion , and other defects of sintered parts. In this paper, a continuum model was developed to simulate the SLS process. The developed model has been successful to predict sintering kinetics. The impact of processing parameters, such as laser power, scanning speed, hatching distance, and particle size has been studied . The proposed method provides an innovative tool to optimize SLS process parameters.

Customer Complaint Management Systems (Ccms) In A Food Processing Industry, Maggie A. Macleish

Senior Honors Projects, 2010-2019

Abstract

The food processing industry must meet customers’ highest quality expectations at the lowest cost. I partnered with Nestlé’s pizza facility in Little Chute, WI, to improve the current customer complaint approach of the quality department, which aimed to improve product quality. To improve the total quality of the system, this project established a defensive method of addressing customer complaints. Some strategies used to improve the current Customer Complaint Management System (CCMS) include Quality Functional Deployment (QFD), fuzzy logic, Kano’s methods, Voice of the customer (VOC) and Go-See-Think-Do (GSTD). These strategies are all related, but have not previously been used …

Impact Of Prognostic Uncertainty In System Health Monitoring, Robert M. Vandawaker, David R. Jacques, Jason K. Freels

Faculty Publications

Across many industries, systems are exceeding their intended design lives, whether they are ships, bridges or military aircraft. As a result failure rates can increase and unanticipated wear or failure conditions can arise. Health monitoring research and application has the potential to more safely lengthen the service life of a range of systems through utilization of sensor data and knowledge of failure mechanisms to predict component life remaining. A further benefit of health monitoring when combined across an entire platform is system health management. System health management is an enabler of condition based maintenance, which allows repair or replacement based …

Analysis Of Portable Charging Systems For Mobile Devices Utilizing Today's Technology, Dylan Ashley

Electrical Engineering Undergraduate Honors Theses

With the progression of technological advances, electronic devices are becoming increasingly smaller while simultaneously becoming increasing powerful. Consumer demand for a cheaper, longer lasting battery life challenges today’s engineers to continually develop a battery and its circuitry with increasing efficiency without compromising performance. Developing an affordable, efficient external battery pack has been the marketable solution, but the question is whether or not the existing external battery packs available are meeting the wants and desires of the end consumer. The answer is partially in that my research confirms that the current solution is not ideal; however, efficiency has been increased as …

Comparison Of Low-Temperature Co-Fired Ceramic And Direct Bonded Copper For Single Ended Primary Inductance Topology, Kristopher Cody Johnson

Electrical Engineering Undergraduate Honors Theses

This work examines the thermal dissipation characteristics of Low-Temperature Co-fired Ceramic (LTCC) and Direct Bonded Copper (DBC) with the implementation of a Single Ended Primary Inductance Converter (SEPIC) topology. The advantages and disadvantages of the two substrates will be explored in addition to a description of the design and control of the SEPIC. It will be shown that the DBC implementation is superior with regards to thermal dissipation, but that LTCC has advantages in high- density packaging, RF applications, and embedded components. These substrates and converters provide many advantages in industrial applications that include automotive and grid level implementations. Additional …

Improving Connectivity Between Members And Alumni Of Alpha Pi Mu, Ben Patrick Buell, Shannon Elizabeth O'Keefe

Industrial and Manufacturing Engineering

The purpose of this project was to solve the problems of a lack of connectivity between the current members and alumni of Alpha Pi Mu, as well as the lack of incentives for prospective members to join the club. These problems were solved by creating a website that allowed current members to be able to view the complete work experiences of alumni and provided a way to reach out to those alumni directly to network with them. The agile project management system was used to develop the website and helped to successfully complete all of our design requirements listed in …

A Case Study Of Multiple-Use Finish Electrodes For Die-Sinking Edm, Troy A. Robertson

Masters Theses & Specialist Projects

This study examines the use of one finishing electrode to finish multiple dies without remachining the electrode. The multiple-use electrode finishing experiment in this study addresses technology in the die-forging industry. Methods of manufacturing spherical straight bevel forge gear dies have relied on die-sinking Electrical Discharge Machining (EDM) practices that showed great potential for advancement. The focus of this study is solely on the improvements of electrode use in EDM finishing-processes. The surface finish quality itself is not an area of concern other than maintaining that it does not diminish. The focused concern is maximizing the process by using one …

Maritime Transportation Research Bank, Valeria A. Remon Perez

Industrial Engineering Undergraduate Honors Theses

The maritime transportation system is an important component of the United States’ (U.S.) economy, from commerce activities to freight movement to disaster’ relief. The annual impact of the maritime transportation system on the U.S. national economy is reported as approximately $649 billion of the total U.S. gross domestic product (U.S. Department of Transportation Maritime Administration, n.d.). This impact is attributed to activities related to the movement of goods and people. Indeed, the maritime transportation system plays an important role in international trade by transporting goods such as coal and farm products, which are common commodities for foreign and domestic commerce …

Prioritizing Interdictions On A Shortest Path Network, Hayden D. Summerhill

Industrial Engineering Undergraduate Honors Theses

We consider a variant to the shortest path network interdiction problem with symmetric information from Israeli and Wood (Networks 40, 97-111,2002) which arises in the context of nuclear smuggling prevention. In the basic shortest path interdiction problem, an interdictor has a limited number of interdictions with which he can lengthen arcs in a network in order to maximize the length of the network’s shortest path. This thesis considers the case in which the interdictor does not make all of the interdictions at once. Rather, the interdictor must make the interdictions over a set number of periods. Each period has a …

Loss On Ignition Using Infrared Heating, Benjamin J. Binoniemi

Masters Theses

The focus of this study is a proof of concept that infrared heating can be used to produce a reliable and rapid method of performing the loss on ignition test. The loss on ignition test is a foundry industry standard test that requires all moisture and volatile organic compounds be vaporized from a sample of foundry sand. The standard test as recommended by the American Foundry Society uses a muffle oven and requires nearly four hours to perform. This new concept performs the same test in approximately ten minutes. The biggest issues with the loss on ignition test are time …

Evaluate The Impact Of Sustainability And Pipeline Quality On Global Crude Oil Supply Chain, Sunny Paraskumar Jain

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

United states is one of the largest crude oil producer in the world but the consumption rate is higher than production hence united states imports oil from varies part of world depend on different criteria. The objective of this dissertation is to evaluate the impact of pipeline quality and facility sustainability on crude oil supply chain cost for Russia and Colombia that gave idea about when and where we have to invest to satisfy United states oil requirement. In order to meet this objective, three specific criteria are investigated as follow:1. Evaluate the supply chain factors that determine pipeline quality …

Inventory Management And Control "For A Cause", John Michael Miller

Graduate Theses and Dissertations

Companies today are changing the culture of business and beginning to involve more than just labor and money in overall decisions. Just as sustainability issues and humanitarian logistics are gaining popularity, so is the idea of using business to make a difference on society in addition to making a profit. As companies position themselves across the globe to make an impact, they employ people in third-world environments that create uncertainties on both the supply and demand sides. Also, the idea of strategically planning work with the goal of minimizing costs has been replaced by companies wanting to give more work …

Sensitivity Analysis Of Dredge Fleet Scheduling, Kaitlin Denny

Industrial Engineering Undergraduate Honors Theses

Each year, the U.S. Army Corps of Engineers (USACE) is tasked with conducting maintenance dredging at hundreds of project sites throughout the country. The USACE must take into account factors such as environmental windows, increased transportation distances, increased operational time because of reduced vessel speeds, and personnel availability constraints. Environmental windows are intended to minimize the environmental impact of dredging while protecting biological resources and their habitats from potentially detrimental effects. The objective of this research is to perform sensitivity analysis of the performance of this model (cubic yards dredged) and how it is impacted by individual environmental window elimination …

Modeling New Product Success From Component Measures Of Product Advantage: A Model Utilizing Automated Text Classification And Sentiment Analysis, Ashley Nolen Akerman

Dissertations

What attributes of products are most associated with product success from the perspective of the consumer and how is this association affected by the technology level of the product offering? Creating successful new products is an imperative for long term survival for businesses. Past research has focused on the perspectives of manufacturers to understand product attributes that comprise the construct described as product advantage. This study investigated the components of product advantage from the perspective of the consumer and the significance of each component in explaining variance in product success.

A methodology and two classification toolsets were developed for the …

Design, Programming, And User-Experience, Kaila G. Manca

Honors Scholar Theses

This thesis is a culmination of my individualized major in Human-Computer Interaction. As such, it showcases my knowledge of design, computer engineering, user-experience research, and puts into practice my background in psychology, com- munications, and neuroscience.

I provided full-service design and development for a web application to be used by the Digital Media and Design Department and their students.This process involved several iterations of user-experience research, testing, concepting, branding and strategy, ideation, and design. It lead to two products.

The first product is full-scale development and optimization of the web appli- cation.The web application adheres to best practices. It was …

Solving Multi-Vehicle Profitable Tour Problem Via Knowledge Adoption In Evolutionary Bi-Level Programming, Stephanus Daniel Handoko, Abhishek Gupta, Chen Kim Heng, Hoong Chuin Lau, Yew Soon Ong, Puay Siew Tan

Research Collection School Of Computing and Information Systems

Profitable tour problem (PTP) belongs to the class of vehicle routing problem (VRP) with profits seeking to maximize the difference between the total collected profit and the total cost incurred. Traditionally, PTP involves single vehicle. In this paper, we consider PTP with multiple vehicles. Unlike the classical VRP that seeks to serve all customers, PTP involves the strategic-level customer selection so as to maximize the total collected profit and the operational-level route optimization to minimize the total cost incurred. Therefore, PTP is essentially the knapsack problem at the strategic level with VRP at the operational level. That means the evolutionary …

Direct: A Scalable Approach For Route Guidance In Selfish Orienteering Problems, Pradeep Varakantham, Hala Mostafa, Na Fu, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

We address the problem of crowd congestion at venues like theme parks, museums and world expos by providing route guidance to multiple selfish users (with budget constraints) moving through the venue simultaneously. To represent these settings, we introduce the Selfish Orienteering Problem (SeOP) that combines two well studied problems from literature, namely Orienteering Problem (OP) and Selfish Routing (SR). OP is a single agent routing problem where the goal is to minimize latency (or maximize reward) in traversing a subset of nodes while respecting budget constraints. SR is a game between selfish agents looking for minimum latency routes from source …

Multi-Agent Task Assignment For Mobile Crowdsourcing Under Trajectory Uncertainties, Cen Chen, Shih-Fen Cheng, Hoong Chuin Lau, Archan Misra

Research Collection School Of Computing and Information Systems

In this work, we investigate the problem of mobile crowdsourcing, where workers are financially motivated to perform location-based tasks physically. Unlike current industry practice that relies on workers to manually browse and filter tasks to perform, we intend to automatically make task recommendations based on workers' historical trajectories and desired time budgets. However, predicting workers' trajectories is inevitably faced with uncertainties, as no one will take exactly the same route every day; yet such uncertainties are oftentimes abstracted away in the known literature. In this work, we depart from the deterministic modeling and study the stochastic task recommendation problem where …

Energy Harvesting And Storage: The Catalyst To The Power Constraint For Leveraging Internet Of Things (Iot) On Trains, Kelechi Nwogu

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

The success of Wireless Sensor Networks is heavily constrained by its reliance on storage technology like batteries, which are a finite resource. Whilst the number of transistors in an IC doubles every 18 months, the energy density of batteries is relatively flat during the same time period. This is a key challenge in leveraging the Internet of Things on trains.

The gravity of this problem is increased by an order of magnitude when the network is to be scaled up to hundreds or thousands of nodes. Comprehensive research and development efforts have been devoted to building ultra-low power sensors. These …