Analysis Of The Effectiveness Of The F-15e Risk Management During Peacetime Operations, Elliot B. Vasquez

Theses and Dissertations

Human factors are causal or contributory in 80% of Class A mishaps in the Air Force. Risk management tools are used throughout the service in every aircraft to help mitigate the risk of those human factors occurring. The F-15E Strike Eagle community was selected for analysis on the effectiveness of its risk management program but the data was comprised on Class A mishaps from Accident Investigation Boards since 2000 between the F-15 (all models), F-16 (all models), and F-22. Cases were selected if there were human factors root causes or contributory. A fault tree analysis coupled with the Department of …

A Method To Predict Compressor Stall In The Tf34-100 Turbofan Engine Utilizing Real-Time Performance Data, Shuxiang A. Li, Trevor G. Jones

Theses and Dissertations

The Air Force current operations continue to undergo significant changes compelled by decreasing fiscal appropriations, aging aircraft, and personnel drawdown. The Air Force must effectively improve current maintenance operations in part to deal with these challenges. This study will explore the area of the A-10 aircraft fleet's TF34-100 high-pass turbo-fan engine sensor data to seek its deterioration modelling and prognostics capability. In futurity this will allow for achievement of greater confidence in predicting the compressor stall which leads to engine performance deterioration and a costly repair in maintenance. By utilizing an innovative method to forecast the probability of compressor stall, …

Supply Chain Interoperability Measurement, Christos E. Chalyvidis

Theses and Dissertations

Academia recognizes that although supply chains have an inherent need to be validated for their performance, supply chain performance measurement systems are still inadequate and one of the major barriers to successful supply chain collaboration. In this research, theory of Systems Architecture is used to make the first step towards an innovative supply chain performance measure defined as supply chain interoperability. Interoperability is considered a similarity metric with regard to a set of deterministic and stochastic characters (criteria) describing supply chain participants, a methodology that adapts and expands an interoperability measurement tool initially developed in and for a military context. …

Blended Classes: Expectations Vs. Reality, Susan L. Murray, Julie Phelps, Kelly L. Jones

Engineering Management and Systems Engineering Faculty Research & Creative Works

Blended courses, also called hybrid, have a portion of the course taught face-to-face in a classroom, and at least one-third of the course work is online. Some instructors consider this format to be "the best of both worlds." Students receive the personal contact and interaction with the instructor during the classroom portion. They also have flexibility in the pace, access, and repetition of the online content. In this paper, we explore 49 graduate students' expectations for a required operations management course that was delivered in a blended format. The same students were also surveyed at the completion of the course …

Assessment Of Management And Documentation Systems For The Bowling Green State University American Society For Quality Student Branch, Sara Murphy

Master of Education in Instructional Design and Technology Plan II Graduate Projects

The Bowling Green State University (BGSU) American Society for Quality (ASQ) student branch seeks to provide current and prospective students the opportunity to expand or build upon current and evolving quality principles. This project seeks to provide the ASQ student branch the opportunity to develop documented systems of daily operations and other activities in relation to the defined BGSU ASQ student branch organizational objectives. The research associated with this project will provide detailed information related to the organizational requirements to aid in the development of documented systemic procedures. The information also indicates what practices should be in place to ensure …

Tensions In The Productivity In Design Task Tinkering – Fundamental, Gina Quan, Ayush Gupta

Faculty Publications

Tensions in the Productivity in Design Task TinkeringTinkering is an ad-hoc approach to a problem and involves the practice of manipulating objectsto characterize and build knowledge about a particular system in an exploratory way, often withthe goal of getting some product/idea to produce desired behavior (e.g. Turkle & Papert, 1991;Berland, 2013; Roth, 1996). Tinkering thus contrasts with more deliberate activity towardsunderstanding how some phenomenon works or towards achieving conceptual understanding.Some researchers have argued that tinkering is an unproductive process because it does notalways lead to progress and/or conceptual learning (Law, 1998; Yeshno & Ben-Ari, 2001).Others view it as productive for …

Active Learning In Supply Chain Management Course, Farnaz Ghazi-Nezami, Mehmet Bayram Yildirim

Industrial & Manufacturing Engineering Presentations And Conference Materials

Active Learning in the Supply Chain Management Course. This paper presents a new active learning approach implemented in the Supply ChainManagement (SCM) course in the Industrial and Manufacturing Engineering Department.Previously, in this course the fundamentals of supply chain and logistics, drivers of supply chainperformance and analytical tools necessary to develop solutions for a variety of SCM and designproblems were mainly covered through class lectures and case study discussions. In the past fewyears, due to the growth in the needs of the organizations to “Lean” principles, the course wasmodified to satisfy this requirement more efficiently. For this purpose a new hands …

Minimizing Average Handling Time In Contact Centers By Introducing A New Process: Rowan Support Desk Case Study, Niusha Jafari

Theses and Dissertations

Quality of a call center performance is an important factor in insuring customer satisfaction. Customers, the "callers", want their requests solved quickly, permanently and to their satisfaction. Often, there are staff constraints, budget or cost limitation, and the Service Level Agreement (SLA) which is resource availability to accomplish a task within a deadline. The purpose of this research is to analyze feasible approaches to minimize the long-lasting open requests and enhance a call center's performance. Multiple challenges that a call center often faces in handling requests are studied to identify key bottlenecks in the process of handling requests. Rowan University …

Measuring And Analysing The Effect Of Openings And Vibration On Reusable Pharmaceutical Insulated Boxes With Daily Distribution, Péter Böröcz, Ákos Mojzes, Péter Csavajda

Journal of Applied Packaging Research

To control the climate when temperature sensitive drugs are delivered is an essential consideration of shippers and freight forwarders. It is common practice to utilize insulated boxes. A survey was conducted to determine the properties of these daily deliveries and factors were observed that influence the climate environment of drugs during travel. These factors included opening intervals, number of openings, trip times and distances. Then the results of the survey were used to perform the recorded circumstances of distribution in laboratory tests as close to reality as possible and analyse the effect of the above-mentioned factors. During real distribution the …

Toe Joint Replacement Models, Tarun Goswami, Allison L. Van Horn, Alexander O. Sheets

Biomedical, Industrial & Human Factors Engineering Faculty Publications

In various embodiments, provided are implantable devices for replacing all or a portion of a metatarsophalangeal joint, comprising (i) a metatarsal component comprising a Substan tially convex bearing Surface; or (ii) a phalanx component comprising a Substantially concave bearing Surface; or (iii) both. In various embodiments, also provided are methods of treating hallux Valgus by replacing all or a portion of a meta tarsophalangeal joint with one or more of the provided implantable devices.

Increasing The Independence Of Children With Spina Bifida Through The Designing And Building Of A Mechanical Aide, Andrew Duffek, Robert Brent, Michael Hamada, Melissa Rodriguez

Industrial and Manufacturing Engineering

In order to assist Silas Hopper, a child with spina bifida, with getting into his wheelchair independently when being on the ground, the senior project team set out to construct a device that would fulfill that purpose. They did this through coming up with a strict definition of the problem to be solved, designing a number of potential solutions for the problem, prototyping to determine the feasibility of the solutions, making design modifications after testing the prototype, and building the final device.

The end product was a device that was able to operate mechanically, with a design that considered safety …

Exploring Bridge-Engine Control Room Collaborative Team Communication, Aditi Kataria, Eric Holder, Gesa Praetorius, Michael Baldauf, Jens-Uwe Schröder-Hinrichs

Journal Publications

The EC funded CyClaDes research project is designed to promote the increased impact of the human element in shipping across the design and operational lifecycle of ships. It addresses the design and operation of ships and ship systems. One of the CyClaDes’ tasks is to create a crew‐centered design case‐study examination of the information that is shared between the Bridge and Engine Control Room (ECR) that helps the crew coordinate to ensure understanding and complete interconnected tasks. This information can be provided in various ways, including communication devices or obtained from a common database, display, or even the ship environment …

Small Scale Erp Engine Design, Colyn Muir Dickson, Matthew Wade Haymond

Industrial and Manufacturing Engineering

This project set out to create a 1) low-cost, 2) dynamic, and 3) user-friendly small scale ERP software tool. These three key attributes position this product against complex and expensive systems such as SAP or Oracle. While the product still retains the dynamic and financial capabilities any good ERP system should have, the biggest value proposition is its simple and user-friendly interface. The software has a dual product-market fit: for small businesses as a low-cost planning tool, and for universities as a teaching tool. In the design phase, the team kept a primary focus on ergonomic software development while maintaining …

Tesla Motors Quality Engineering Application And Implementation, Nick Kwan

Industrial and Manufacturing Engineering

Tesla Motors, in Winter 2013 during the author’s coop,had a variety of potential improvement areas regarding their quality engineering team. There were too many overall defects on the vehicles. Those defects were recognized as the cars were passing through inspection, coming off the line, as well as brought by customers to after-purchase service. One of the defects was the Charge-port Door Malfunction, in which the door of the Model S would not open on command. An additional defect was the Windshield Wiper Malfunction, in which the fluid was not hitting the car at the desired angle. Both of these defects …

Database Design For The Collection And Visualization Of Sustainabilty Data, Henry A. Kozlowski, Nikhila Perugupalli

Industrial and Manufacturing Engineering

The goal of the project was to create a database that would be a repository for the high volume of sustainability data Illumina would like to collect. To couple with the database the project team’s goal was to design a system for visualizing the data graphically. Illumina required a database system that would be user-friendly, easy to add, delete, and edit data inputs, as well as a program that would allow the user to easily sort and graph data. The intent of the graphical representation of the data is to publish the graphs in a monthly report that would be …

Industrial Engineering Consulting, Blake J. Ahrold, Torrey M. Plana

Industrial and Manufacturing Engineering

This paper documents the senior project of Blake Ahrold and Torrey Plana. This project was created to provide a solution to the problem of small to medium Sized enterprises (SMEs) being under represented by lean consulting companies. The project was at first intended to be a lean consulting startup and then pivoted to The Systems Optimization Club. A project charter, Gantt chart, and business model canvas were created for the startup and used as guidelines in the creation of the Systems Optimization club. The club is to be run like a lean consulting company. The club will provide teams of …

Strasbaugh Nonconforming Report Optimization, Eden Andersen, Angela Asgekar, Rebecca Gregg

Industrial and Manufacturing Engineering

This paper strives to convey the problems and proposed solutions for Strasbaugh’s Nonconforming Report (NCR) Optimization. Strasbaugh is a world leader in silicon wafer polisher and grinder technologies. After a significant down size to the company parts they used to manufacture now have to be purchased, and many of these incoming parts do not conform to Strasbaugh’s high standards. This has led to an increase in NCRs that need to be processed, which takes up time, resources and money.

The objective therefore became to update the multi-sheet carbon copy paper system to better optimize the use of these reports and …

Designing A Supply Chain For Wine Imports, Italy To California, Neil Magnuson, Sam Bucher

Industrial and Manufacturing Engineering

Executive Summary

In this report a framework for a hypothetical business will be covered. Bucher & Magnuson Wine Import Inc. has provided a business plan as well as a detailed supply chain design for operations. In addition, a model for scaling and a redesign of a possible storage facility will be found. This comprehensive document outlines end to end the supply chain model of the hypothetical business and moreover a framework for starting a wine import business in San Luis Obispo.

The conclusions of the results from this model are the following:

• Unconcerned with time, the cheapest route for 1 …

  ---

  Go to article

Alumnus Shares His Passion For Technology Accessibility

DePaul Magazine

Brent Shiver (CDM MS ’04, PhD ’13) attended the College of Computing and Digital Media and worked with another deaf student, Karen Alkoby (CDM MS ’99, PhD ’08), on the DePaul ASL Project, which combines computer technology and linguistics research to bridge the communication gap between the deaf and hearing worlds by working to develop a digital English-to-ASL translator. He works for IBM Accessibility as a software engineer.

An Automated Solution For Analyzing Supply Chain Performance, Paul Ringelstein

Industrial and Manufacturing Engineering

The world is becoming increasingly connected as technology progresses and globalization reaches more countries. This interconnection creates new challenges and new relationships for both people and businesses. Now, more than ever, businesses have to work together to satisfy the high demands of customers.In a world full of complex organizations that do business together, the supply chain has become the heartbeat of corporations. The interconnectedness of the organizations in the supply chain is critical to the success of all components of the supply chain. In order to gain an advantage in markets today, data needs to be used to determine where …

Analysis Of 3d Printer Schedule, Colin B. Mclane

Industrial and Manufacturing Engineering

With recent innovations in technology, 3D printing has become a rapidly expanding manufacturing method that is being used for a wide range of applications. Their ability to build parts layer by layer instead of cutting away initial material allows this method to have almost no wasted material, creating the potential for a much more efficient, cost effective process. In order to continue the growth of this manufacturing strategy, the performance of 3D printers need to be enhanced to ensure equal or higher quality of produced parts in comparison to other manufacturing methods that are more commonly used. One important part …

Cost Effective Analysis Of Big Data, Steven J. Litzsinger, Nehad Dababo

Industrial and Manufacturing Engineering

Executive Summary

Big data is everywhere and businesses that can access and analyze it have a huge advantage over those who can’t. One option for leveraging big data to make more informed decisions is to hire a big data consulting company to take over the entire project. This method requires the least effort, but is also the least cost effective. The problem is that the know-how for starting a big data project is not commonly known and the consulting alternative is not very cost effective. This creates the need for a cost effective approach that businesses can use to start …

Design Of An Automated Vehicle Detection System For Bicycles: Fireworks Cycling Sensor, Jason Cheng, Peter Kim, Tory Morgan, Clayton Young

Industrial and Manufacturing Engineering

Abstract

This report explores the necessity for increased cyclist safety in urban settings, leading to the birth of a product which aims to drastically reduce the risk of accidents while heightening the sense of safety overall. The project outlines and details the product development process of a consumer-friendly vehicle detection system, with a holistic scope which includes technical rapid prototyping and coding, team dynamics, decision making process, and change management. Two formal prototypes were developed before a functional final product was identified and constructed, each iteration drastically improving practicality and efficiency of detection. The final product underwent extensive testing in …

Economic Analysis And Justification For Automated Welding Systems, Roxanne Raye

Industrial and Manufacturing Engineering

This report looks at designing a new welding process for a company in the Oil & Gas industry, ensuring method consistency and performance quality of their steel drill bit while increasing overall production. The current product is welded manually with a flux core wire, resulting in high cycle times and numerous cases of required rework.

The use of automation systems will be analyzed for their increased consistency, quality, safety, and production estimates. Specifically robotic cell design will be considered, since it can work on more parts with fewer operators, adding efficiency and flexibility to the production floor. Other areas of …

Dcpp/Polygait Inventory Control System, Logan Pace, Robert Garlinghouse

Industrial and Manufacturing Engineering

This report discusses a proposed system to improve upon inventory management issues experienced in the M&TE Tool room for the PG&E Diablo Canyon Power plant. Effective inventory tracking and management is an important characteristic of any organization handling physical assets, and without the proper system in place, companies may lose expensive items and waste time by not having equipment available when needed. The tool room is experiencing inventory shrinkage of M&TE equipment nearing $100,000 per year largely because of an inefficient checkout system that fails to keep employees accountable for the tools they check out. Even more costly than the …

Quality Improvement At Patio Pacific, Petdoors, Tri Minh Nguyen, In Woo Suh

Industrial and Manufacturing Engineering

Quality is key in manufacturing any type of product. Customer expectations only rise with time, and it has become more crucial than ever for companies to produce quality products to survive. This project sets out to improve quality of flagship products at Patio Pacific. This report contains the background of the company, Patio Pacific, the process of finding critical problems, and the methodology to solve them.

Customer returns and inquiries have the ability to eat up cash flow in any type of company. This senior project sets out with introduction of the project that explains how the project came about, …

Developing Entrepreneurial Thinking In Engineering Students By Utilizing Integrated Online Modules, Ronald S. Harichandran, Maria-Isabel Carnasciali, Nadiye O. Erdil, Cheryl Q. Li, Jean Nocito-Gobel, Samuel Bogan Daniels

Mechanical and Industrial Engineering Faculty Publications

An approach to develop entrepreneurial thinking skills in engineering students by integrating online modules into existing courses is described. Eighteen online modules covering a variety of topics will be developed. Developers for the modules are selected by reviewing proposals submitted in response to a broadly distributed request for proposals. Developers undergo extensive training before embarking upon module development. Students will complete each standalone module outside of class hours. Instructors who deploy a module in their course will develop contextual course assignments that reinforce concepts covered in the modules. These instructors also undergo training and are assisted by an external consultant. …

Lessons Learned From A Simulation Project In Construction Education, Saeed Rokooei, James D. Goedert

Department of Construction Engineering and Management: Faculty Publications

Virtual Interactive Construction Education (VICE) is a simulation designed for construction education. The purpose was to provide the traditional lecture-based construction contents along with supplementary instructions in a project-based learning environment. Six modules were proposed as a curriculum delivery guideline including: single span bridge, residential building, light commercial, heavy commercial, highway, and segmental bridge. The single span bridge was the first module used for prototype development providing an opportunity to design, analyze, implement, and test for effectiveness. This paper describes the design steps and results of this three-year research project. VICE-Bridge required participants to sequentially order the construction activities and …

Don't Go Chasing Big Waterfalls, William "Ike" Eisenhauer

Engineering and Technology Management Faculty Publications and Presentations

The article focuses on the importance of simpler health systems in the U.S. Topics discussed include success of simple systems as they are well-understood, improvement of simple systems by coupling them together, handling more patient cases by larger systems by the medical laboratory technicians giving complicated results and designing simple systems by health system engineers to deal with fewer problematic cases of patients with more efficacy.

Solar Cal Poly Active Hvac Project, James Cornish, Jake Cosmo, Patrick Weston

Mechanical Engineering

For this project, the goal was to conceptualize, design, test, and implement an active HVAC system to be used in the Solar Cal Poly house competing in the Department of Energy’s 2015 Solar Decathlon. With many house iterations, it was decided to use a split system with an outdoor heat pump and indoor air handler, paired with a HRV for ventilation. Through system modeling using Design Builder and Energy Pro 6.5, the cooling load of the house was determined along with the cooling schedule. The foreseen safety precautions and limited construction time guided the entire project, along with the active …