Operations Research, Systems Engineering and Industrial Engineering Commons^™

Robotic Manufacturing Cell: An Analysis Of Variables Affecting Performance, Elvis Alicic

Dissertations and Theses @ UNI

Analyzing the performance of manufacturing cells is a well established concept. The justification for conducting thorough analyses of manufacturing cells comes from the known advantages it can provide, including performance improvement and production planning improvement, both current and future. This study focuses on assessing the variables affecting performance of a robotic manufacturing cell through the measure of throughput. Initially, simulation modeling is utilized to model an existing robotic cell and compare the output to actual production output from the same cell. Additionally, general regression modeling is employed to analyze the following variables and their effect on throughput: machine downtime, off-plan …

Strategic Management And Entrepreneurship As Economic Development Tools, Norbert Ziemer

Doctoral Dissertations

This research develops a framework of Biobased Entrepreneurial Ventures for Rural Economic Development. Rural economic development poses unique challenges and opportunities, based on available production assets, workforce trends like "brain drain," and access to industry clusters. However, certain entrepreneurial venture opportunities are preferable for rural economic development. Since supply chains are vital to business success, initial emphasis is placed on the biomass resource base to be transformed through entrepreneurial activity into higher economic value outputs. The literature contains research on specific opportunities in rural economic development (e.g. ethanol, wind power). Many of these are limited in scope and depend on …

Sustainable Engineering Practices In Transportation Projects, Kiran Rangarajan

Doctoral Dissertations

"Sustainability has become an important issue in transportation and infrastructure development projects. While several agencies are trying to incorporate a range of sustainability measures in their goals and missions, only a few planning agencies have been able to implement these policies and they are far from perfect. The low rate of success in implementing sustainable policies is primarily due to incomplete understanding of the system and the interaction between various elements of the system. The conventional planning efforts focuses mainly on performance measures pertaining to the system and its impact on the environment but seldom on the social and economic …

Search-Based System Architecture Development Using A Holistic Modeling Approach, Renzhong Wang

Doctoral Dissertations

"This dissertation presents an innovative approach to system architecting where search algorithms are used to explore design trade space for good architecture alternatives. Such an approach is achieved by integrating certain model construction, alternative generation, simulation, and assessment processes into a coherent and automated framework. This framework is facilitated by a holistic modeling approach that combines the capabilities of Object Process Methodology (OPM), Colored Petri Net (CPN), and feature model. The resultant holistic model can not only capture the structural, behavioral, and dynamic aspects of a system, allowing simulation and strong analysis methods to be applied, it can also specify …

Real-Time Supply Chain Predictive Metrics, William Scott Hunter

Doctoral Dissertations

"Supply chains drive the production world. Virtually all products use a supply chain to produce them and they can determine the success of companies using them. The ability to manage supply chains is currently a mix of relationship management and science, combining personal and company relationships with data analysis.

The increased dependency on supply chains has increased the need to develop and use predictive real-time metrics to manage supply chain risk, measure suppliers and drive performance. Current metrics used are reactive and stagnant in nature. Real-time metrics will allow supply chain professionals to better manage risk. Current management techniques include …

Dynamic Model-Based Systems Engineering Using Xml Metadata Interchange, Dustin Scott Nottage

Masters Theses

"Designing systems presents an engineer with numerous design choices based on multiple conditions and constraints. Base camp planning must take into account the number of soldiers, the permanency of the base, the location of the base, etc. To help alleviate the complexity of constructing a base camp, a model-based systems engineering approach is used. This method creates and integrates models for all of the facilities that can make a base camp, as well as interactions between facilities and required utilities for each. The goal is to have a camp design, and then solve a system of equations to solve for …

Optimization Of Process Planning For Focused Ion Beam Machine In Nano-Manufacturing, Sushrut Shekhar Naik

Masters Theses

"The current revolution witnessed by nanotechnology is facing several challenges such as manufacturing of nano sized devices economically on a large scale. Focused ion beam (FIB) technology is one of the widely used approaches for nano-manufacturing due to its versatile nature. It provides accurate machining and process repeatability and has a range of applications. Major challenges for the current FIB process are the tradeoffs between quality, the processing time, and the long planning time. This research provides a pathway to eliminate the current problems facing nanotechnology. Using MATLAB and the Helios 600 FIB/SEM instrument available, modeling and analyses are carried …

Parametric Moment Closure For Non-Linear State Dependent Stochastic Systems, Ritesh Arora

Masters Theses

"This research highlights the use of moment closure approximation techniques to provide analytical approximations to nonlinear state dependent systems. Nonlinear systems are often difficult to solve and often approximated through the use of simulation. However, Moment Closure has the capability to derive an approximate solution by making a closed form solution out of open set of differential equations representing nonlinear system behavior in both transient and equilibrium state. It is this capability of approximating the closed form solution to complex systems that draws interest in the use of this method within systems engineering. This research further extends to the stability …

A Feasibility Analysis Of Retrofitting Existing Roadway Lighting Infrastructure With Led Technology, Sean Michael Schmidt

Masters Theses

LED technology has advanced towards use in high intensity lighting purposes. LED luminaires have a significantly longer expected lifetime than traditional high-intensity discharge lighting systems. Due to these recent improvements in LED technology, there is a growing need for a comprehensive method to analyze the applicability of LED luminaires for use on major routes and roadways. This research investigates the acceptability of LED luminaires for use on major roadways through a feasibility analysis using data collected at various LED street light testing sites. Nine distinct LED luminaires were analyzed in field testing. The field data was then analyzed and compared …

Editorial: International Journal Of Critical Infrastructures, Holly Ann Heine Handley, C. Ariel Pinto, Adrian V. Gheorghe

Engineering Management & Systems Engineering Faculty Publications

(First paragraph) This special issue of the International Journal of Critical Infrastructures is a compilation of the papers presented at the Fourth Annual Conference on Next Generation Infrastructures held in Virginia Beach, Virginia, in November, 2011. This conference was sponsored by Old Dominion University, Norfolk, Virginia, USA and by the Next Generation Infrastructures Foundation, Delft, The Netherlands. The participants travelled from around the globe to converse about ideas that address both concerns for the present and optimism for the future of critical infrastructures. The conference, held in the USA for the first time, provided a platform for vibrant discussions on …

Colonel Blotto Games And Lancaster's Equations: A Novel Military Modeling Combination, Andrew Collins, Patrick T. Hester

VMASC Publications

Military strategists face a difficult task when engaged in a battle against an adversarial force. They have to predict both what tactics their opponent will employ and the outcomes of any resultant conflicts in order to make the best decision about their actions. Game theory has been the dominant technique used by analysts to investigate the possible actions that an enemy will employ. Traditional game theory can be augmented by use of Lanchester equations, a set of differential equations used to determine the outcome of a conflict. This paper demonstrates a novel combination of game theory and Lanchester equations using …

On Critical Infrastructure Interdependency, Polinpapilinho F. Katina, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

Developing effective protection, mitigation, and recovery measures for critical infrastructure (CI) systems is paramount in the wake of increasing natural and manmade hazards, risks, and threats. Influencing protection, rescue, and recovery measures are interplays (i.e., interdependencies) among infrastructure systems. Understanding interdependencies plays an essential role in minimizing and reducing cascading failures among complex interdependent infrastructure systems. This paper asserts that deployment of protection, mitigation, and recovery solutions can have little effect on infrastructure management if infrastructure operators and policymakers have partial understanding of infrastructure interdependencies. Using narrative research, authors illustrate that effective coordination and response for protection, mitigation, and recovery …

Modeling And Evaluating Role And Team Work Processes Using The Improved Performance Research And Integration Tool, Holly A. H. Handley, Pilar Pazos

Engineering Management & Systems Engineering Faculty Publications

The Human View architecture was designed to capture the human requirements of a system and to answer questions about the interactions between humans and systems. Data captured in the Human View can be used to populate a simulation model to evaluate the performance of the humans interacting in a work process. The work process model can be used to investigate different types of human system analyses, at both the role and team levels, and to identify the appropriate metrics to evaluate the results. This study examined individual role performance using the metrics readily available in the simulation tool, and then …

A Case Study Of Key Factors Driving Global Virtual Team Effectiveness, Pilar Pazos, Ana María Canto, Nina C. Magpili

Engineering Management & Systems Engineering Faculty Publications

The purpose of this study is to increase our understanding of the factors contributing to global virtual team effectiveness. We report on a case study on global virtual teams whose members differed in location and nationalities, worked on common collaborative projects, and used media to communicate and coordinate their work. This paper examines the relationships between input factors such as goal commitment, planning and resource availability and team outcomes. Data were collected from 14 teams in an international Master's program in Quality Management, Safety and Environmental Impact hosted in Bolivia and Chile. Students were from nine different countries in South …

The Impact Of Online Collaboration Spaces On Virtual Team Outcomes, Anil Ustun, Pilar Pazos

Engineering Management & Systems Engineering Faculty Publications

With the emergence of information technology, organizational teams often work virtually, relying on different technologies to successfully complete tasks. This paper investigates the influence of online collaboration spaces on team performance and team affective outcomes such as satisfaction with the process. An experiment will be conducted in which teams of 3 participants will work together on a survival decision-making activity (Lost at Sea). Teams will be collaborating in a web-conferencing (Adobe Connecta™) space and a 3D (three-dimensional) virtual space (Second Life). Based on Social Presence Theory, we expect that the avatar-based 3D environment will provide a richer environment for social …

Identification Of Rework Station Location To Enhance Reworkability Using Design For Disassembly, Juan Alejandro Saavedra

Open Access Theses & Dissertations

Rework stations are commonly established as part of each assembly stations causing the material flow of the process to be constantly interrupted. Another option is to place the rework station at the end of the production, but this is not cost effective. This breakeven point between reworkability and cost methodology has been proposed in this thesis to identify the location of a single rework station in an assembly line in order to enhance reworkability using the Design for Disassembly (DfD) principles. The methodology uses the 17 guidelines of DfD in a manufacturing scenario in order to propose a reworkability index …