Operations Research, Systems Engineering and Industrial Engineering Commons^™

Systems Engineering, Caitlin A. Lambing, Eric D. Smith

COURI Symposium Abstracts, Summer 2012

Systems Engineering is a fast growing field in the engineering braches. It can be applied to anything that one can be described as a system. To show this, two different projects are being directed through the systems engineering department at UTEP. In the Student Busing Project, UTEP was granted funding from the Green Fund in order to pursuit the start of a busing system on campus. Research on other busing systems, as well as the effects and costs of adopting a busing system were researched. Surveys were completed, and additional research was done to see the environmental effects the buses …

Generating Minimal T-Wise Test Suites, Luis C. Gutierrez, Carlos Nieto, Francisco Zapata, Martine Ceberio

COURI Symposium Abstracts, Summer 2012

As the use of computing devices increases every day, users rely on the adequate functioning of software. When software is not tested properly, it can yield erroneous information or a complete failure of the system. The NIST estimates that defective software cost the United States economy close to $60 billion a year. Therefore, there is a need to develop software testing techniques that are time and cost effective. Fully testing software under all possible combinations of parameters values cannot be reduced. However, testing can focus on covering all combinations of subsets of parameters and empirical data shows that doing so …

Safety, Ergonomics And Human Factors Engineering On Biomedical Devices Design, Alejandra Sandoval Vazquez^, Noe Vargas Hernandez*

COURI Symposium Abstracts, Spring 2012

No abstract provided.

Generating Minimal Pair-Wise Covering Test Suites, Luis C. Gutierrez ^, Martine Ceberio *

COURI Symposium Abstracts, Spring 2012

Software is ubiquitous and needs to be reliable. Software testing therefore plays an important role in software development. Proper testing a software system informs about its quality and reliability so as to prevent unexpected behavior during system execution. One of the methods to prevent failures consists in testing a system under different input values, but when all possible input values are tested, an impractical number of test cases might result. In software testing, pair-wise testing is a combinatorial technique which uses combination of pair input values to generate test cases. Using pair-wise testing dramatically reduces the number of test cases, …

New Mathematical And Evolutionary Optimization Methods To Achieve Fair Division In Multi-Agent Resource Allocation, Emmanuel Gurrola Molina

Open Access Theses & Dissertations

The problem of resource allocation among a group of agents naturally arises in a wide range of real-life events. The subject has earned popularity across the disciplines of Economics, Computer Science, Artificial Intelligence Operations Research and Social Welfare. This resource allocation problem can be commonly referred to as Multi-Agent Resource Allocation (MARA). This work considers a MARA problem where a central agent decides to allocate a set of divisible and non-divisible goods. MARA is considered to be part of an interdisciplinary research area in which the literature is vast and rapidly developing. However, most of the available literature mainly focuses …

Designing Optimal Aviation Baggage Screening Strategies Using The Monkey Search Algorithm, Edgar Ivan Jimenez

Open Access Theses & Dissertations

This thesis addresses the aviation baggage screening design problem considering several baggage screening devices which may be used for system implementation, the devices have different false clear and false alarm rates, throughput and purchase costs. In the present research, a comprehensive cost function which not only includes the cost associated with purchase and operation of baggage security devices, but also includes the indirect costs associated with device errors is used. A new monkey search based evolutionary algorithm is presented to determine the best selection of baggage screening security devices in order to minimize the expected annual total cost. The final …

Decision Rule Induction For Service Sector Using Data Mining- A Rough Set Theory Approach, Zhonghua Hu

Open Access Theses & Dissertations

Nowadays, data mining is more widely used than ever before; not only by the academic area, but also in the industry and business area. Apart from execution of business processes, the creation of knowledge base and its utilization for the benefit of the organization is becoming a strategy tool to compete. Despite of having ever growing data bases, the problem is that the finance company fails to fully capitalize the true benefits which can be gained from this great wealth of information. The data mining technology instead of classic statistical analysis is developed to help the people to discover the …

Multi-Objective System Design Optimization Considering Environmental Emissions, Olivia Carolina Moreno

Open Access Theses & Dissertations

The well-known reliability optimization problem, the redundancy allocation problem (RAP) involves the simultaneous selection of system components and a design level configuration that can meet several design constraints in order to optimize the predefined objective function(s). The RAP has been predominantly solved as a single objective optimization problem with the reliability of the system to be maximized or system design cost to be minimized. When considered as a multiple objective reliability optimization problem, the system reliability is maximized and the cost and weight of the system are minimized. In this work, the RAP was formulated as a multiple objective optimization …

Identification Of Rework Station Location To Enhance Reworkability Using Design For Disassembly, Juan Alejandro Saavedra

Open Access Theses & Dissertations

Rework stations are commonly established as part of each assembly stations causing the material flow of the process to be constantly interrupted. Another option is to place the rework station at the end of the production, but this is not cost effective. This breakeven point between reworkability and cost methodology has been proposed in this thesis to identify the location of a single rework station in an assembly line in order to enhance reworkability using the Design for Disassembly (DfD) principles. The methodology uses the 17 guidelines of DfD in a manufacturing scenario in order to propose a reworkability index …

Implementation Of Evolutionary Algorithms On The Power Industry And Aviation Security, Anuar Jesus Aguirre

Open Access Theses & Dissertations

The main objective of the power electric power grid is to supply reliable electricity to all the customers. Customers could be industrial, commercial, household, transportation and others. The power grid is a complex and large, and it formed by the conjunction of the generation, transmission and distribution system. The present research is focused in power distribution system. A new component replacement analysis method to solve component replacement problems for complex electricity distribution systems using Genetic Algorithms is developed. In the present model a Taylor series expansion is used to approximate the associated opportunity cost for each component in the system. …

Enterprise Transformation Through A Zachman-Bayesian Framework To Improve Efficiency & Productivity, Ramakanth Gona

Open Access Theses & Dissertations

Although organizations are aware of the benefits of enterprise architectures models, organizations have difficulties determining deficiencies in their business architecture. Organizational assessment tools often do not achieve expectations as sold to management. Performance measures often fail to properly represent necessary holistic measurements. Methods for capturing deficiencies in current business models and deterring improvements to optimize business processes are rare. This thesis develops a new experimental architecture modeling approach for enterprise transformations. The approach is efficient in capturing deficiencies and finding correlations which can become targeted goals for improvements. The Zachman enterprise architecture framework provides a holistic view of organizational models …

Development Of A New Evolutionary Algorithm Based On Adaptive Echolocation Applied To A Multi Objective Version Of The Redundancy Allocation Problem, Karla Rocio Gutierrez

Open Access Theses & Dissertations

The intention of this research is to develop a new algorithm that it is mainly focus in the principle of echolocation or also called biosonar. This principle is active in many animals such as: birds, shrews, dolphins and bats, these last ones are going to be a fundamental part of our study. These animals use it as radar in order to find food, obstacles or just to locate objects.

These animals use ultrasound beams with a certain degree of angle and multiple receivers; such as the two ears that are located slightly apart, so at the time of the returning …

Indentifying And Understanding User Preferences In Generic Planning Tools, Grisel Ventura

Open Access Theses & Dissertations

Planning is an important cognitive work activity. To support this complex task, the development of planning tools is important to support people during decision-making and problem-solving tasks. Nowadays, a large number of manual and electronic tools support this complex activity; manual and electronic planning tools aid people in creating strategies for effective work performance. However, there is limited information on the design of generic planning tools people use for their activities, and why people choose to use the planning tool they do. Some examples of generic tools for planning are calendars, checklists, agendas, etc.

To answer this question, this research …

Observer-Dependent Model For Analyzing Subjective Parameters In Epidemiology, Milad Zarei

Open Access Theses & Dissertations

Although medical technologies for preventing the contagion and spread of infectious diseases have improved steadily throughout the last century, new infectious diseases are still emerging and spreading swiftly. The modeling of infectious disease spread is crucial in addressing the lack of predictive ability in epidemiology. Managing the spread of infectious diseases requires processing quantitative epidemiological data and the ability to capture the dynamics of the infectious disease in order to provide a measure of control.

In this thesis, I have introducing cognitive biases in diseases spread modeling. For the first time, to the author's knowledge, the human subjective experience has …

Theoretical Exploratory Investigation On Reliability Of Advanced Ceramics By Discrete Element Simulation, Ana Laura Quezada Lara

Open Access Theses & Dissertations

The increasing application of silicon nitride in biomedical and other engineering fields has elevated the necessity to understand its reliability. Due to the complexity of producing pure material researchers have been analyzing the behavior of the material with flaws. In this thesis several scenarios are simulated with the support of PFC2D to analyze microcrack propagation depending on the position, quantity and size of the voids to understand the effect each of the cases have on the material. A four point bending test was applied to each case twice recording the loading force. Having two runs allows doing a statistical analysis …

Component Replacement Analysis For Electricity Distribution Systems Using Evolutionary Algorithms, Vasukumar Chenna

Open Access Theses & Dissertations

The main objective of the electric power grid is to supply economical and reliable electricity to industrial, commercial, household, transportation, and other end-users, including agricultural, educational institutions and hospitals. The power system is a very large and complex network consisting of generation, transmission, and distribution systems. The main focus of the present research is in the area of power distribution systems. Almost all the areas of the power grid uses simpler radial distribution systems to distribute electricity to the end consumer, it is the final and therefore vital link between the consumer and the rest of the power grid. Therefore …

E-Quality: Using Dimensional Index Values Towards Improving Classification Accuracy, Prashanth Devaram

Open Access Theses & Dissertations

E-quality is a process through which inspection of the process and quality of the part produced is done online resulting in the improvement of the process and reduction in the amount of time consumed for the overall process. Automated quality control involves using a methodology to classify the parts based on the dimensions of the features on a part. However, achieving 100% classification accuracy is not an easy task, especially in area of quality control where small differences in dimensions result in part fall into a different category. In this study, a novel approach for modifying the data before being …

Optimization Models For The Economic And Non-Economic Level Of Repair Analysis, Carlos Marco Ituarte-Villarreal

Open Access Theses & Dissertations

Every component, equipment or system will eventually fail. All failures produce a maintenance cost and, repair costs are especially hard to estimate ahead of time. Research shows that maintenance costs are the most substantial costs of development and use of equipment, reason why the cost of the product or equipment through its life is a major concern. Therefore, the main objective of this thesis is to provide a new optimization model to determine the minimum cost maintenance policy for complex systems.

Renewable Energy Integration: An Approach For Micro-Grid Optimization., Nicolas Lopez

Open Access Theses & Dissertations

This thesis explores the Renewable Energy Integration Problem beginning with a literature review on the different sources of electrical energy classified as Non-Renewable and Renewable, stating that the integration of renewable sources within the pre-existing Power-Grids is a current worldwide problem that is being addressed with different approaches.

The impossibility to exactly model the different equations relating the electric output of the renewable energy sources as they relate with meteorological factors, makes the renewable sector a stochastic component of the overall mathematical model, where it can be concluded that most of the problem is in the area of the forecast. …

Multi-Objective Network Reliability Optimization Using Evolutionary Algorithms, Franciso Oswaldo Aguirre

Open Access Theses & Dissertations

This work presents a new multiple objective evolutionary algorithm to solve three well known network reliability allocation problems considering different conflicting objectives to be optimized simultaneously. The new algorithm is applied in the design of a telecommunication network that is formed for several stations or nodes interconnected by telecommunication links or paths. The problem presented in this work involves finding which links to activate in order to obtain connectivity in the nodes. The number of nodes that need to be connected depends of the case that is being evaluated. The three network reliability problems considered are: all-terminal, k-terminal, and two-terminal. …

Novel Approach To Predict The Crash Testing Data Using Multiple Regression Analysis And Principal Component Analysis, Ravi Lochan Kallur

Open Access Theses & Dissertations

In the design process of vehicles, crash tests are very critical to determine the safety measures. Every motor manufacturing company has to maintain certain standards for their autos. This will lead to the design optimization of safety measures utilizing the data available from crash tests. The engineers perform various experiments to generate data from crash testing of vehicles in their manufacturing facility. With the help of simulators; they create a virtual environment to perform design changes. Hence the data obtained from the crash tests is vital in design optimization of safety systems. The present study deals with the technologies involved …

Multiple Objective Optimization Of Performance Based Logistics, Delia Villanueva

Open Access Theses & Dissertations

This thesis presents a new Performance Based Logistics optimization model. Performance Based Logistics (PBL) is becoming increasingly important for manufacturers in mission critical environments that need to provide ultimate product availability at the lowest cost and with the highest level of customer satisfaction. The U.S. Department of Defense has mandated that Performance Based Logistics programs be adopted by its major weapon systems and equipment suppliers, is one of the newest support strategies to improve the weapon system readiness. This work presents a new multiple objective evolutionary approach that simultaneously optimizes objectives such as Reliability, Maintainability and Total Cost for Ownership. …

Hybrid Approach For Site Selection Using Impact Assessment And Principal Component Analysis, Ugandhar Reddy Kondamadugula

Open Access Theses & Dissertations

Principle component analysis (PCA) is used to analyze week data of emission of particulate material from the Residential community. In this Thesis we selected five sites maps where sensors are arranged to collect particulate materials PM0.25, PM 10.Impact Assessment on the site areas are done in the first case,the results Impact Assessment on the site shows that the Global warming potential is really high at the site when the analysis is run for hundred years the Global warming potential has a very high impact on Environment leading to various health hazards. Secondly Principal Component Analysis is used to find out …

Electric Power Distribution Optimization Using Evolutionary Algorithms, Sowmya Parimi

Open Access Theses & Dissertations

In the present research, a new evolutionary algorithm is developed to solve the component allocation problem in electricity distribution systems. The problem addresses the upgrade/design of an electricity distribution system with the objective of minimizing expected system downtime subject to cost and repair time constraints. The algorithm is tested on the Dual Element Spot Network (DESN) configuration which is one of the most commonly used configurations by the power industry. This algorithm is demonstrated with two examples.

Discrete Element Modelling Of Silicon Nitride Ceramics: Crack Formation And Propagation In Indentation Test And Four Point Bending Test, Rajeev Senapati

Open Access Theses & Dissertations

Advanced ceramic materials have been extensively used in aerospace, automobile and other industries. However, the reliability of the advanced ceramics is the major concern because of the brittle nature of the materials. This work aims to model silicon nitride ceramics using Discrete Element Method (DEM) and simulating the crack formation and propagation. DEM software package PFC2D is used to simulate indentation test and four point bending test on silicon nitride ceramics and the behaviour of crack formation and propagation is identified. The numerical representation of ceramic materials is done by generating a densely packed particle system using the specimen genesis …

Using The Taguchi Design And The Central Composite Design To Increase The Robustness Of A Process From Its Raw Material Variability, Alvaro Cuevas

Open Access Theses & Dissertations

This research presents an experimental study where four controllable and one noise factor are analyzed using the Taguchi approach and the Central Composite Design (CCD) in order to induce robustness in a process that is being designed to treat residual grease from small restaurants. Three response variables are analyzed separately to establish the parameters conditions to obtain the most robust process output. These suggested conditions are validated conducting confirmation runs that are compared statistically to the predictions from the Taguchi prediction model for the Taguchi approach, and the Response optimizer for the CCD. The accuracy of each method is measured …

Retention And Productivity In Industrial Search And Scan Tasks, Camilo Aguilera

Open Access Theses & Dissertations

An experiment was developed in order to study the interaction between individual factors (gender and mood) and the retention ability in search and scan activities. 54 subjects between 18 and 30 years old participated in a computer-based memory test from the North of Mexico area. A full factorial design was used to analyze the variables. Two factors, one with two levels (gender: male and female), and the second factor with three levels (mood: positive, neutral, and negative) were used in the analysis. The output was measured as the amount of characters memorized in a string of random alphanumeric characters. Data …

Comparison Of Older Mexican American Upper Extremity Reach Capabilities To Older Anglo Americans, Odi Mike Ikpe

Open Access Theses & Dissertations

The study aimed to investigate if there are upper extremity reach capability differences in older Mexican Americans and older Anglo Americans. The subjects were recruited and corresponded to the 2000 census track. Upper extremity reach capability was determined by analysis of 20 range of motion variables. A MANOVA analysis utilizing SPSS software was performed with age, gender and ethnicity as independent variables while height and 20 range of motion anthropometric measurements servings as dependent variables (responses). Ethnicity as a function of age was found to be significant in height, horizontal distance from buttock to hand, rotation of head to the …

Nondestructive Testing For Finding Out The Displacement Of Crack In Silicon Nitride, Sriharsha Kurra

Open Access Theses & Dissertations

Nondestructive testing (NDT) has become an increasingly vital factor in the effective conduct of research, development, design and manufacturing. Only with the appropriate use of nondestructive testing techniques, the benefits of advanced materials science can be fully realized. NDT has a wide range of industrial applications and various methods and techniques are employed to perform the nondestructive testing. The current work aims to demonstrate the nondestructive testing technique applied to determine the damage in silicon nitride. Ceramics are brittle materials and non destructive evaluation methods are required to assess the quality and reliability of them. A nondestructive evaluation technique has …

Optimization Of Flow For Plastic Pbt With 45% Glass And Mineral Fiber Reinforcement In An Injection Over Mold Process Using Taguchi, Cpk And Mold Flow Simulation Software Approaches, Israel Sanchez

Open Access Theses & Dissertations

This Thesis analyze the plastic injection molding parameters in order to identify which parameters significantly affects the flow properties of Polibuthylen Thereptalate with 45% glass/mineral reinforcement, and which levels are the best to use for those parameters. With the purpose of optimizing the plastic flow conditions in an injection mold to obtain parts free from short shots (term used to describe a plastic part that is incomplete due to the poor plastic flow in the mold runners and cavities).

The used approach is Taguchi design of experiments to define which parameters have significant effect on the response variable, and the …