Operations Research, Systems Engineering and Industrial Engineering Commons^™

Applications Of A New Genetic Algorithm To Solve The Centralized Carrier Collaboration And Multihub Location Problem Considering Environmental Impacts, Eduardo Jose Castillo Fatule

Open Access Theses & Dissertations

The Centralized Carrier Collaboration and Multi-hub Location Problem (CCCMLP) represents a strategy that small-to-medium sized less-than-truckload (LTL) carrier companies can use in order to improve their profit margins. It is a strategy that is being explored in order to make these companies more sustainable as they are forced to reinvent their processes and supply chains. In this work, I will present a metaheuristic approach to optimizing their hub establishment and routing policies in order to better their expected profit margins and reduce their environmental impacts. The study considers the costs of transportation, loading and unloading, maintenance, operations, and inventory holding …

Predictive Modeling On The Piezoelectric Properties Of 3d Printed Functional Nanocomposites Using The Data Analytics Approach, Md Didarul Islam

Open Access Theses & Dissertations

This paper presents research done on prediction modeling using a data analytics approach to determine various factors affecting the piezoelectric properties of the 3D printed pressure sensors. Previously, the material extrusion 3D printing technique was used to fabricate pressure sensors composed of multiwall carbon nanotubes (CNT), barium titanate (BT), and polyvinylidene fluoride (PVDF) using simple fabrication and low-cost methods. This sensor produced a voltage output of 725 mV (0.13 pC/N) which is enough for pressure sensing applications. However, a holistic study to determine impacts of all factors was not carried out in the previous model. In this study, the design …

Shape Detection Of Structural Electronics Using Machine Vision System Embeded Into Scara Robot, Varaha Venkat Vyas Kumar Naidu

Open Access Theses & Dissertations

Additive manufacturing processes combined with enhanced technologies for electronics production enables a highly flexible manufacturing of personalized 3D electronic devices. Due to the technical progress within the last years, these technologies made their way from prototyping towards manufacturing. The growing request for products manufactured in batch size, making use of a robot to incorporate the electronic components necessary to make functional 3-Dimensional-Structural Electronics will extend the mass production possibilities. There is significant interest in automation of a process in which parameters are influential in the occurrence of assembly defects and which adjustments should be made to those variables to reduce …

Economic And Environmentally Efficient Energy Management System For Optimal Microgrid Operation, Olayinka Samuel Obafemi

Open Access Theses & Dissertations

The aim of this Thesis is to study and understand the economic analysis of integrating renewable energy resources for the purpose of improving the system grid, identifying and monetizing benefits and cost. This Thesis discusses the approach taken and solution created to tackle the current problems facing the production and consumption of electricity and how the microgrid has become a platform for improvement in power system operation. A microgrid in islanded and connected mode are simulated using Homer Pro for optimization and its results help gain an insight into analyzing and monetizing cost and benefits with one common goal in …

Technical Project Management: Union Of Systems Engineering Processes With Project Management Processes, Deyaaldeen M. Abusal

Open Access Theses & Dissertations

Today, most projects in technical fields utilize project management to complete projects as planned, and some of the projects utilize system engineering to cover the project in both technically and commercially. This Thesis investigates the relationship between Project Management (PM) and Systems Engineering (SE) to determine if a suitably professional level of management and level of quality can be achieved. When studying PM and SE separately and make a comparison between both, there is much overlap between these two mature fields. The project could be planned and completed solely by either process. This study combines both fields of Project Management …

Extraction Of Fiber Morphology From Sem Images For Quality Control Of Fiber Reinforced Composites Manufacturing, Md Fashiar Rahman

Open Access Theses & Dissertations

The morphology of fibers (e.g. spatial uniformity, orientation, and length) plays a decisive role in determining the material properties or fabrication quality of fiber-reinforced nanocomposites. Hence, determining the morphology becomes a very critical issue in the field of nanocomposite quality control. The conventional way of quality inspection is to take the scanning electron microscopic (SEM) images of the cross-section of composite material and do the visual checking of these SEM images to evaluate the nanofiber alignment and length distribution. But this type of inspection is often subjective, inaccurate and time consuming. Moreover, the extremely small size of nanofibers makes the …

Healthcare Utilization Awareness And Labor Monitoring Methodology: A Theoretical I.M.S.E. Approach To Risk Minimization And Human Metrics Capturing In The Nursing Workforce, Luis Reyes

Open Access Theses & Dissertations

The healthcare industry is so complex and dynamic that the development of any tool designed to promote positive patient outcomes nearly requires the developer to be an actual healthcare practitioner. Many healthcare tools exists that initially give the perception that there will be no future requirements that may hinder the tools' integrity, but more often than not, the unexpected occurs. The future is one unpredictable element of life that most engineers wish they could capture with optimal precision. I.M.S.E. (Industrial, Manufacturing and Systems Engineering) applications do not assist with fortune telling, but they do assist with creating robust tools designed …

Supplier Evaluation And Selection In Automotive Industry Using Conditional Probability, Anand Raj

Open Access Theses & Dissertations

Supplier evaluation and selection is one very important factor for the success of a company. There are many supplier evaluation and selection tools and software available in the market. But this approach is different from the others. Here a comprehensive list of suppliers selection criteria is selected and they are divided in 3 supplier selection group. This group of criteria is done based on the relationship among them. All the suppliers are evaluated based on these 3 supplier selection group. The supplier with the highest value is selected. The probability associated with that factor is assigned and at the end …

Development Of Post-Pareto Optimality Methods For Multiple Objective Optimization, Juan Valentin Fernandez

Open Access Theses & Dissertations

In the past years, multiple objective optimization has been considered, as an important research area since in many real life problems there exists multiple criteria that need to be optimized simultaneously. The use of evolutionary algorithms or metaheuristic methods as solution methodologies lead to a large number of Pareto solutions rather than a single unique optimum. This Pareto-optimal set most of the time tends to be very large and the decision maker now faces the challenge of reducing its size to analyze a feasible number of solutions, thus deciding the best possible solution. In this work, two methods will be …

A Cubesat Communication System Development For Gto Mission, Ashiqur Rahman

Open Access Theses & Dissertations

Tracking, telemetry and command (TT&C) systems on traditional small satellites have advanced significantly in last few decades. The capabilities, requirements and expectations of the communication system have been increased significantly for the smaller satellites. Small satellites are now performing the tasks near to the bigger satellites which increases the dependency on the communication system in terms of reliability and data management. This Thesis paper will focus on development of the communication system of a 1U cube Satellite named Orbital Factory II (OFII). The satellite will be launched into a geostationary transfer orbit (GTO) onboard a United Launch Alliance (ULA) Atlas …

Risk Mitigation In The Supply Chain Caused By Multitple Phase-In And Phase-Out Components Using Simio Simulation, Anabel Renteria Marquez

Open Access Theses & Dissertations

Manufacturing is constantly changing, adapting to new technologies and making improvements on their products design, while dealing with engineering design changes can represent an improvement or savings to the company it can also end up as a huge risk of disruption in the Supply Chain if there is not a safety phase-in and phase-out components transition because the network became more complex and affected processes needs to be revalidated, here comes the importance to set up an strategy to mitigate any possible risk and maximize total revenue.

A case study for a two tiers level Supply Chain system is evaluated …

Image Data Mining For Quality Control Of Nanofiber Reinforced Piezoelectric Nanocomposites Based On Sem Images, Zhonghua Hu

Open Access Theses & Dissertations

Recently, portable and wireless nano-scaled devices have been widely used in environmental monitoring, medical implants, defense technology, industrial safety, and personal electronics, such as the nanowire-based gas and chemical sensors and programmable nanowire circuit for nano-processors. There has been an increasing demand for high energy density capacitors that can be engineered for various applications in advanced devices. In it, piezoelectric nanofiber materials play critical role in producing new products. A piezo-ceramic polymer composite contains a polymer of high dielectric strength and high permittivity ceramic inclusions, making it well suited as a high energy density capacitor. Furthermore, the research shows that …

Renewable Energy Systems Optimization Using Monte Carlo Simulation And Evolutionary Algorithms, Nicolas Lopez

Open Access Theses & Dissertations

This Dissertation explores the Renewable Energy Integration Problem, and proposes a Genetic Algorithm embedded with a Monte Carlo simulation to solve large instances of the problem that are impractical to solve via full enumeration. The Renewable Energy Integration Problem is defined as finding the optimum set of components to supply the electric demand to a hybrid

microgrid. The components considered are solar panels, wind turbines, diesel generators, electric batteries, connections to the power grid and converters, which can be inverters and/or rectifiers. The methodology developed is explained as well as the combinatorial formulation. In addition, 2 case studies of a …

Optimal Energy Management System For A Net Zero Building Using Multi-Agent Systems Approach, Arzhang Ghassemi Pashakalaei

Open Access Theses & Dissertations

Buildings have a significant impact on energy usage and the environment. Much of the research in architectural sustainability has centered on economically advanced countries because they consume the most energy and have the most resources. However, sustainable architecture is important in developing countries, where the energy consumption of the building sector is increasing significantly. The aims of this Thesis are investigating using the hybrid system, which formed by interconnecting two source of renewable energy as solar (PV arrays) and wind (turbine) along with city grid for compensation purposes wherever it is required. In this Thesis, after literature review, we consider …

A Novel Approach To Control Corrosion Behaviour On Bio Materials Using Taguchi Method (Design Of Experiments), Sai Dhiresh Kilari

Open Access Theses & Dissertations

In the present work, the Taguchi method, from the design of experiment (DOE) has been used to optimize the dip testing method to test the corrosion resistance of bio degradable materials such as PLA (Polylactic acid)and PCL (Polycaprolactone). A L9 (9) orthogonal array of Taguchi design was used, which involves nine experiments for three parameters (pH, sample, temperature) with three levels was used. Corrosion resistance in various pH change of HCL solution was evaluated by dip tests at various temperatures. Analysis of variance (ANOVA) is performed on the obtained measured data and S/N (signal to noise) ratios. The lower the …

Enhancing Surface Finish Of Fused Deposition Modeling Parts Through Targeted Chemicals And Design Of Experiments, Saurabh Nayyar Nayyar

Open Access Theses & Dissertations

Fused Deposition Modeling (FDM) is one of the most popular rapid prototyping (RP) technologies due to its low operational cost, high fabrication speed, and range of applications served. However, FDM fabricated parts generally have poor surface finish quality which have limited their utilization in end-use applications. To enhance surface quality of FDM materials, several researchers have regulated key process parameters using the FDM material, Acrylonitrile Butadiene Styrene (ABS), with varying results. The main goal of this research is to investigate the effects of a post-fabrication chemical treatment process on the surface roughness for FDM parts of the FDM material ULTEM. …

Design Of Experiments-Based Scara Robot Parameter Evaluation For Embedding Electronics Into 3d Print, Sreekara Charith Boppana

Open Access Theses & Dissertations

Additive manufacturing processes combined with enhanced technologies for electronics production enables a highly flexible manufacturing of personalized 3D electronic devices. Due to the enormous progress within the last years, these technologies made their way from prototyping towards manufacturing. The growing request for products manufactured in batch size, making use of a robot to incorporate the electronic components necessary to make functional 3-Dimensional-Structural Electronics will extend the mass production possibilities. There is significant interest in automation of a process is which parameters are influential in the occurrence of assembly defects and which adjustments should be made to those variables to reduce …

Single And Multiple Objective Biomass-To-Biofuel Supply Chain Optimization Considering Environmental Impacts, Claudia Evangelina Valles Sosa

Open Access Theses & Dissertations

Bioenergy has become an important alternative source of energy to alleviate the reliance on petroleum energy. Bioenergy offers diminishing climate change by reducing Green House Gas Emissions, as well as providing energy security and enhancing rural development. The Energy Independence and Security Act mandate the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. It is clear that Biomass can make a substantial contribution to supply future energy demand in a sustainable way. However, the supply of sustainable energy is one of the main challenges that mankind will face over …

A Cell Formation Algorithm For Sequential Processes With Alternative Machine Selection In The Automotive Lighting Industry, Victor Manuel Loya Garnica

Open Access Theses & Dissertations

At the present time, there are more than 12 big companies dedicated to design and produce OEM lighting systems for cars and trucks. The manufacturing processes for headlamps, tail lamps and any other exterior vehicle lighting are very common in the auto industry. Still, every automotive lamp assembly is different from brand to brand and even between the different vehicle models. Indeed, there are car headlamps with less than 30 sub-components and others with up to 300 elements. This implies creating diverse part numbers which share or hold varying manufacturing methods within a specific facility. Management of the plant resources …

Wind Farm Optimization Using Evolutionary Algorithms, Carlos Marco Ituarte-Villarreal

Open Access Theses & Dissertations

In recent years, the wind power industry has focused its efforts on solving the Wind Farm Layout Optimization (WFLO) problem. Wind resource assessment is a pivotal step in optimizing the wind-farm design and siting and, in determining whether a project is economically feasible or not. In the present work, three (3) different optimization methods are proposed for the solution of the WFLO: (i) A modified Viral System Algorithm applied to the optimization of the proper location of the components in a wind-farm to maximize the energy output given a stated wind environment of the site. The optimization problem is formulated …

E-Quality Control Using 3d Reconstruction And 3d Measurement, Jun Zheng

Open Access Theses & Dissertations

Recently more and more industrial applications use image acquisition to improve product manufacturing. The observed growth in the last few years is mainly due to the great advances in acquisition devices which are now affordable for more industrialists. Moreover, the increasing demands in the quality requirements of the products are a great stimulus to apply vision tools which allow a better understanding of the impact of the manufacturing process on the product quality. Vision tools have been used in many industrial fields. But the traditional 2D vision is not as reliable as 3D measurement due to the limitations of the …

Decision Making Model For Foreign Object Debris/Damage (Fod) Elimination In Aeronautics Using Quantitative Modeling Approach, Jose Jaime Lafon

Open Access Theses & Dissertations

(FOD) Foreign Object Debris/Damage has been a costly issue for the commercial and military aircraft manufacturers at their production lines every day. FOD can put pilots, passengers and other crews' lives into high-risk. FOD refers to any type of foreign object, particle, debris or agent in the manufacturing environment, which could contaminate/damage the product or otherwise undermine quality standards. Nowadays, FOD is currently addressed with prevention programs, elimination techniques, and designation of FOD areas, controlled access to FOD areas, restrictions of personal items entering designated areas, tool accountability, etc. All of the efforts mentioned before, have not shown a significant …

Part Detection And Classification Using Integrated Machine Vision And Knowledge Based Expert System, Cristian Giovanni Lopez Ulloa

Open Access Theses & Dissertations

Manufacturing cost is a topic of interest in the automotive manufacturing industry. Even though rework and repair methods are acceptable processes in manufacturing, there is little investigation done on the classification and cost parameters of a repairable or re-workable part. Having a non-conforming part indicates a loss in revenue to a manufacturing company, thus the need to repair or rework the part. Repair and rework processes take non-conforming products of a manufacturing line and bring the parts back to conforming stage. In this study, the proposed system establishes a connection between detection of defects, classification of them based on defect …

An Approach To Power Efficiency Determination In The Solar Energy Systems Using Central Composite Design And Box-Behnken Design, Juan Venegas Mendez

Open Access Theses & Dissertations

We are living in an industrialized world that relies on fossil fuels. The ways, in which these fossil fuels have damaged the earth, in special the environment is worth of special attention and corrective actions. In our days, the climate change (global warming) it is becoming the number one topic. These changes are affecting our health, comfort and our way of living. Solar systems have been working among us since several years, but the truth is that most of us really don't understand how they work and more important, how they work in time in different conditions. Solar panels are …

Prediction Of Foreign Object Debris/Damage Fod Type Based In Human Factors For Aeronautics Using Logistic Regression Model, David Ricardo Romo

Open Access Theses & Dissertations

Foreign Object Debris/Damage (FOD) has been an issue for military and commercial aircraft manufacturers since the early ages of aviation and aerospace. Currently, aerospace is growing rapidly and the chances of FOD presence are growing as well. One of the principal causes in manufacturing is the human error. The cost associated with human error in commercial and military aircrafts is approximately accountable for 4 billion dollars per year. This problem is currently addressed with prevention programs, elimination techniques, and designation of FOD areas, controlled access, restrictions of personal items entering designated areas, tool accountability, and the use of technology such …

A Quantitative Approach Using An Axiomatic Design Framework To A Medication Distribution System, Pepito Raguini

Open Access Theses & Dissertations

As the need to minimize medication errors drives many medical facilities to come up with robust solutions to the most common error that affects patient's safety, these hospitals would be wise to put a concerted effort into finding methodologies that can facilitate an optimized medical distribution system. If the hospitals' upper management is looking for an optimization method that is an ideal fit, it is just as important that the right tool be selected for the application at hand. In the present work, we propose the application of Axiomatic Design (AD), which is a process that focuses on the generation …

Prediction Of Foreign Object Debris/Damage (Fod) Type For Elimination In The Aeronautics Manufacturing Environment Through Logistic Regression Model, Natalia V. Espino

Open Access Theses & Dissertations

Foreign Object Debris/Damage (FOD) is a costly and high-risk problem that aeronautics industries such as Boeing, Lockheed Martin, among others are facing at their production lines every day. They spend an average of $350 thousand dollars per year fixing FOD problems. FOD can put pilots, passengers and other crews' lives into high-risk. FOD refers to any type of foreign object, particle, debris or agent in the manufacturing environment, which could contaminate/damage the product or otherwise undermine quality control standards. FOD can be in the form of any of the following categories: panstock, manufacturing debris, tools/shop aids, consumables and trash. Although …

Optimization Of Bioprinting Process Using Design Of Experiments (Doe) And Taguchi Method, Maria Veronica Gonzalez

Open Access Theses & Dissertations

At this time there is a need for new fabrication techniques for engineering complex biological structures related to regenerative medicine, in vitro tissue analysis, and pharmaceutical testing with the purpose of placing specific cells in specific target locations. Right now, there is no enough conventional cell seeding methods that can achieve it. In order to achieve it, bio-fabrication, which is a delivery mechanism capable of placing biomaterials, cells, and bioactive macromolecules in specific target locations, comes to play an important role in this area. Among different approaches, bioprinting is one of the most useful processes that use drop-on-demand delivery mechanisms …

Optimization Of Biomass Logistics System Using Genetic Algorithm And Particle Swarm Optimization For Biofuel Production, Ethel Regina Martinez-Schabez

Open Access Theses & Dissertations

As time goes by, Renewable Energy keeps proving to be an important and potential replacement for fossil fuels. All the different types of Renewable Energy offer a relief to the environmental aftermaths of the prolonged reliance on fossil fuel energy. Bioenergy is one of the types of Renewable Energy that can help by minimizing the emissions of fossil fuels. The Energy Independence and Security Act mandates the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. Biomass and Biofuels can clearly become a significant aid to sustainably supply energy in …

Design Of A Biomass-To-Biorefinery Logistics System Through Bio-Inspired Metaheuristic Optimization Considering Multiple Types Of Feedstocks, Isidoro Trueba

Open Access Theses & Dissertations

Bioenergy has become an important alternative source of energy to alleviate the reliance on petroleum energy. Bioenergy offers significant potential to mitigate climate change by reducing life-cycle greenhouse gas emissions relative to fossil fuels. The Energy Independence and Security Act mandate the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. It is clear that Biomass can make a substantial contribution to supplying future energy demand in a sustainable way. However, the supply of sustainable energy is one of the main challenges that mankind will face over the coming decades. …