Operations Research, Systems Engineering and Industrial Engineering Commons^™

Innovation Measurement: A Decision Framework To Determine Innovativeness Of A Company, Kenny Phan

Dissertations and Theses

Innovation is one of the most important sources of competitive advantage. It helps a company to fuel the growth of new products and services, sustain incumbents, create new markets, transform industries, and promote the global competitiveness of nations. Because of its importance, companies need to manage innovation. It is very important for a company to be able to measure its innovativeness because one cannot effectively manage without measurement. A good measurement model will help a company to understand its current capability and identify areas that need improvement.

In this research a systematic approach was developed for a company to measure …

Assessment Of Solar Photovoltaic Technologies Using Multiple Perspectives And Hierarchical Decision Modeling, Nasir Jamil Sheikh

Dissertations and Theses

The objective of this research is to build a decision model for a comprehensive assessment of solar photovoltaic technologies using multiple perspectives. These perspectives include: social, technological, economic, environmental, and political (STEEP) with each perspective consisting of multiple criteria. Hierarchical decision modeling and expert judgment quantification are used to provide the relative ranking of the perspectives and criteria. Such modeling is effective in addressing technology evaluations with competing and contrasting perspectives and criteria where both quantitative and qualitative measurements are represented. The model is then operationalized by constructing desirability functions for each criterion. The combined results provide an overall numerical …

Cytoskeletal Strains In Modeled Optohydrodynamically Stressed Healthy And Diseased Biological Cells, Sean S. Kohles, Yu Liang, Asit K. Saha

Mechanical and Materials Engineering Faculty Publications and Presentations

Controlled external chemomechanical stimuli have been shown to influence cellular and tissue regeneration/degeneration, especially with regards to distinct disease sequelae or health maintenance. Recently, a unique three-dimensional stress state was mathematically derived to describe the experimental stresses applied to isolated living cells suspended in an optohydrodynamic trap (optical tweezers combined with microfluidics). These formulae were previously developed in two and three dimensions from the fundamental equations describing creeping flows past a suspended sphere. The objective of the current study is to determine the full-field cellular strain response due to the applied three-dimensional stress environment through a multiphysics computational simulation. In …

Dynamics Capabilities, Caroline Mudavadi, Farshad Madani, Garrett Gilliland, Corey White

Engineering and Technology Management Student Projects

Slides from a presentation based on Teece, D. J. (January 01, 2007). Explicating dynamic capabilities: the nature and microfoundations of (sustainable) enterprise performance. Strategic Management Journal, 28, 13, 1319.

Discusses capabilities that enable business enterprises to create, deploy, and protect the intangible assets that support superior long-run business performance.

Leveraging Carbon Financing To Enable Accountable Water Treatment Programs, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

This article outlines the technical premise and policy considerations surrounding the first program to generate carbon finance for drinking water treatment.

Forecast Of Wireless Communication Technology: A Comparative Study Of Regression And Tfdea Model, Dong-Joon Lim, Timothy R. Anderson, Jisun Kim

Engineering and Technology Management Faculty Publications and Presentations

This study presents a formal comparison of TFDEA with regression model to forecast wireless communication technology. In addition to the data set from the former research, up-to-2011 4G network technologies are added and analyzed. The research was designed to set the point of forecasting in 2001 so that technologies between 2001 and 2011 are to be forecasted using data set between 1979 and 2001. The results from both TFDEA and regression model are compared and discussed. This comparative study can provide forecasters with different aspects between 'best-practice measurement' and 'average practice measurement' and, ultimately, help to select the suitable approach …

Measuring Sustainability, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

The World Health Organization estimates that 884 million people do not have access to safe sources of drinking water. Meanwhile, about half of the world's population continues to use unsustainable, biomassbased energy sources for indoor fuel, leading to extensive deforestation, harmful indoor air emissions, and in many cases upper respiratory disease and high commodity costs for impoverished families. Exacerbating these problems are the international effects of climate change, expected to significantly impact developing countries by changing water and energy quality and availability. International development organizations work tirelessly to address these challenges. However, many efforts struggle with achieving long-term sustainability; many …

Case Study: The Optimization Of Information Flow & Organization In Software Development, Farshad Madani, Bing Wang, Xiaowen Wang, Corey White, Liying Wang

Engineering and Technology Management Student Projects

Trial and error are inevitable in the process of software development; the redesign is wasteful when unfocused communication occurs within the development process. To speed up this development process, we optimized the information flow and redesigned the development organization into chunks. First, we investigated the information flow between tasks and coupled tasks into phases utilizing the Design Structure Matrix (DSM) so that the information exchange among chunks of tasks is as few as possible. In this way, the redundant iterations of tasks are eliminated. Meanwhile, we also grouped the engineers into groups according to the tasks, in this; we eliminated …

Patent Analysis For Smart Grid Development In The U.S, Abrahim Abdulsater, Bahareh Saatchi, Farshad Madani

Engineering and Technology Management Student Projects

By increasing demand for energy among nations the rate of fossil fuel consumption is boosting. The raise of fossil fuel consumption has motivated nations to gain some capabilities for the purpose of dealing with some consequences; the more fossil fuel consumption, the higher price for energy, and the higher rate of GHG as well. Recently smart grid technology has been introduced as a healing approach in terms of using energy more efficiently. This study made an effort to have some discussions around smart grid technology development in the United States by patent analysis and forecasting. The outcomes in both technology …

Application Of Reference Models In Technology Management, Farshad Madani

Engineering and Technology Management Student Projects

Reference models, sometimes called with other different words, prepare a general model from a specific view of the related environment. Reference models are considered as a basic foundation to create: 1) a common language among specialists 2) a reference for the entities such as processes 3) relationships among entities 4) tools and decision making procedures for the real world.

In this report, it's tried the definitions of reference model in the selected papers have been reviewed. It's noticeable that in many papers the term of framework is used instead of reference model. Also, applications of reference models are reviewed and …

Bring Your Own Water Treatment System: United States Patent, Evan A. Thomas, Maximilian Gold

Mechanical and Materials Engineering Faculty Publications and Presentations

A method and apparatus for filtering a fluid is presented. In one embodiment, the apparatus converts contaminated water into water having a lower turbidity and bacterial contamination level than the contaminated water. The apparatus includes a settling unit for at least partially settling a portion of the water; a filter unit having a filtration media; wherein the filtration media comprises sand, anthracite coal, burnt rice husks, diatomaceous earth, gravel, pumice gravel, or combinations thereof; a sanitation unit; wherein the sanitation unit is an ultraviolet disinfection unit; a backwash unit; wherein the settling unit is in fluid communications with the filter …

Social Innovation Concepts At Nasa: Integrating International Development Challenges And Hands-On Prototyping With Spacecraft Design Training, Leonard Yowell, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

The NASA Johnson Space Center Social Innovation program has been designed to encourage innovation within the NASA community that benefits both NASA's core mission as well as human needs domestically and internationally. By encouraging internal and external collaboration and providing resources including the new Johnson Space Center "Sandbox" design shop, new innovations are anticipated. Technologies developed for the human exploration of space share similar requirements with appropriate technology for the developing world. The technology goals of keeping people alive in a difficult environment involve addressing requirements for low maintenance and robustness and often include using renewable energy sources. Technologies developed …

Sustainable Oxygen: A Low Power Approach For Providing Emergency Medical Oxygen For Spacecraft And Hospitals In Developing Countries, Anndee L. Huff, Evan Rhead, Zdenek Zumr, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

An oxygen concentrator targeting an 80% reduction in power demand over commercial systems is being developed using a pressure swing adsorption process. This system is targeted for a service interval five times longer than commercial systems, and is tolerant to high humidity environments- the leading cause of device failure in developing countries. This system could provide emergency medical oxygen in a spacecraft without increasing oxygen concentration in the vehicle. Flight surgeons seek this capability, but presently, there is no system that meets power, size, and delivery rate requirements. This type of system is also well suited for medical oxygen in …

Systems Ideas For The Scientific And Societal Imperatives Of The Coastal Ocean: Case Of The Bp Oil Gusher In The Gulf Of Mexico, Spring & Summer 2010, Christopher Mooers

Systems Science Friday Noon Seminar Series

In recent decades, great progress has been made in advancing the scientific understanding of the coastal ocean (i.e., the 200 nautical mile Exclusive Economic Zone (EEZ)) across a broad set of disciplines. Simultaneously, the societal use of the coastal ocean has skyrocketed through, for example, increased shipping & boating, sports & commercial fishing, and exploitation of non-living resources, such as, oil & gas extraction and sand & gravel mining. International law and national policy assign coastal nations the responsibility for stewardship (i.e., wise management) of their respective EEZs. The scope of the stewardship and applications can be summarized as (1) …

Proving Sustainability: The International Development Monitoring Initiative, Evan A. Thomas, Zdenek Zumr

Mechanical and Materials Engineering Faculty Publications and Presentations

Nearly a billion people in the world lack access to safe drinking water, two billion have inadequate sanitation facilities, three billion use biomass for their daily energy needs and nearly half the world's population live in rural isolation, lacking access to the most basic human services. Combined, these limitations are a leading cause of the perpetuating cycle of poverty and political insecurity. Meanwhile, the majority of international development agencies are responsible for self-reporting project outcomes. At best, expert spot-checks are conducted in the field occasionally. These results tend to show individual project success, while meta- surveys indicate on-going challenges in …

Presentation: Proving Sustainability: The International Development Monitoring Initiative, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

Presentation detailing the activities and products of the Sustainable Water, Energy and Environmental Technologies Laboratory at Portland State University (SWEETLab). The lab also works to develop standards to help evaluate and compare projects and outcomes around the world. Water treatment and sanitation practices, as well as newly designed cookstoves, are highlighted.

A Look Into The Future Of Wireless Mobile Communication Technologies, Jisun Kim, Tugrul Unsal Daim, Timothy R. Anderson

Engineering and Technology Management Faculty Publications and Presentations

The number of wireless mobile communication service subscribers has reached 4.6 billion worldwide in 2009, and mobile revenues are expected to be over $1 trillion around 2012 according to the International Telecommunication Union (ITU) (ITU, 2010). A significant number of studies have been done to forecast the growing market and evaluate the new generation technology, the Beyond 3 Generation (B3G). However, there is no study forecasting when any of these new technologies will be commercialized. This paper presents a technical framework for forecasting the commercialization timeline of B3G technologies and provides insight on technology trajectories from 1G to 4G. The …

How A Systems Engineer Starts..., Herman Migliore

Systems Science Friday Noon Seminar Series

Dr. Migliore will review systems engineering as a process for developing products, processes, and services and suggest views that encourage systems thinking. As an example, he will focus on the beginning of the development process, the fuzzy front end, and discuss a method, ConOps, for getting started using examples from PSU's masters program.

Second-Generation International Space Station Total Organic Carbon Analyzer Verification Testing And On-Orbit Performance Results, Nicole L. Bentley, Evan A. Thomas, Michael Van Wie, Chad Morrison

Mechanical and Materials Engineering Faculty Publications and Presentations

The International Space Station (ISS) total organic carbon analyzer (TOCA) is designed to autonomously assess recovered water quality by providing an indication of total organic carbon (TOC). The current TOCA has been on the ISS since November 2008. Functional checkout and operations revealed complex operating considerations. Specifically, failure of the hydrogen (H2) catalyst resulted in development of an innovative oxidation analysis method. This method reduces activation time and limits the H2 produced during analysis, while retaining the ability to indicate TOC concentrations within 25% accuracy. Subsequent testing and comparison to archived samples returned from the station and tested on the …

Developing Sustainable Life Support System Concepts, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

Sustainable spacecraft life support concepts may allow the development of more reliable technologies for long-duration space missions. Currently, life support technologies at different levels of development are not well evaluated against each other, and evaluation methods do not account for long-term reliability and sustainability of the hardware. This paper presents point-of-departure Sustainable System Mass (SSM) evaluation criteria for life support systems that may allow more robust technology development, testing, and comparison. An example sustainable water recovery system concept is presented.

Development Of A Contingency Capillary Wastewater Management Device, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

The personal body-attached liquid liquidator (PBALL) is conceived as a passive, capillary-driven, contingency wastewater disposal device. In this contingency scenario, the airflow system on the NASA crew exploration vehicle is assumed to have failed, leaving only passive hardware and vacuum vent to dispose of wastewater. To meet these needs, the PBALL was conceived to rely on capillary action and urine wetting conditions from 0° < θadv ∼ 90°, be adaptable for both male and female use, collect and retain up to 1 L of urine, minimize splash-back, and allow continuous draining of the wastewater to vacuum while minimizing cabin air loss. A subscale PBALL test article, which was tested on NASA's reduced-gravity aircraft in April 2010, successfully demonstrated key components of this design.

A Model For Sustainable Humanitarian Engineering Projects, Evan A. Thomas, Bernard Amadei, Robyn Sandekian

Mechanical and Materials Engineering Faculty Publications and Presentations

The engineering profession should embrace a new mission statement?to contribute to the building of a more sustainable, stable, and equitable world. Recently, engineering students and professionals in the United States have shown strong interest in directly addressing the needs of developing communities worldwide. That interest has taken the form of short-and medium-term international trips through Engineers Without Borders?USA and similar organizations. There are also several instances where this kind of outreach work has been integrated into engineering education at various US institutions such as the University of Colorado at Boulder. This paper addresses the challenges and opportunities associated with balancing …

Optical Acquisition And Polar Decomposition Of The Full-Field Deformation Gradient Tensor Within A Fracture Callus, Wangdo Kim, Sean S. Kohles

Mechanical and Materials Engineering Faculty Publications and Presentations

Tracking tissue deformation is often hampered by material inhomogeneity, so local measurements tend to be insufficient thus lending to the necessity of full-field optical measurements. This study presents a novel approach to factoring heterogeneous deformation of soft and hard tissues in a fracture callus by introducing an anisotropic metric derived from the deformation gradient tensor (F). The deformation gradient tensor contains all the information available in a Green-Lagrange strain tensor, plus the rigid-body rotational components. A recent study [Bottlang et al., J. Biomech. 41(3), 2008] produced full-field strains within ovine fracture calluses acquired through the application of electronic speckle pattern …

Developing Sustainable Spacecraft Water Management Systems, Evan A. Thomas, David M. Klaus

Mechanical and Materials Engineering Faculty Publications and Presentations

It is well recognized that water handling systems used in a spacecraft are prone to failure caused by biofouling and mineral scaling, which can clog mechanical systems and degrade the performance of capillary-based technologies. Long duration spaceflight applications, such as extended stays at a Lunar Outpost or during a Mars transit mission, will increasingly benefit from hardware that is generally more robust and operationally sustainable overtime. This paper presents potential design and testing considerations for improving the reliability of water handling technologies for exploration spacecraft. Our application of interest is to devise a spacecraft wastewater management system wherein fouling can …

Technology Forecasting For Wireless Communication, Timothy R. Anderson, Tugrul Unsal Daim, Jisun Kim

Engineering and Technology Management Faculty Publications and Presentations

Wireless communications technologies have undergone rapid changes over the last 30 years from analog approaches to digital-based systems. These technologies have improved on many fronts including bandwidth, range, and power requirements. Development of new telecommunications technologies is critical. It requires many years of efforts. In order to be competitive, it is critical to establish a roadmap of future technologies. This paper presents a framework to characterize, assess and forecast the wireless communication technologies. A DEA-based methodology was used for predicting the state-of-the-art in future wireless communications technologies.

Emergence Of Networks In Distance-Constrained Trade, Kumar Venkat, Wayne W. Wakeland

Complex Systems Faculty Publications and Presentations

Long-distance trade has been rapidly increasing in recent years. As traders from around the world exchange goods, they form networks with traders as nodes and transactions as links. We use an agent-based model of a simple artificial economy to examine the emergence of trade networks when the distance between traders matters. Distance can become an issue if fuel for transportation becomes expensive or if greenhouse gas emissions from transportation become a major concern. We model the distance constraint as a transaction cost proportional to the amount of goods traded and the distance that those goods must be transported. We find …

Using Agent Based Simulation And Game Theory Analysis To Study Information Sharing In Organizations – The Infoscape, Richard Donald Jolly, Wayne W. Wakeland

Complex Systems Faculty Publications and Presentations

Information sharing in organizations, especially the impact of sharing freely versus not sharing, was studied using game theory and agent based simulation. A game theoretic analysis was performed, and Netlogo simulations were carried out wherein some agents hoarded information while others shared information. As expected, sharing was found to greatly increase the overall amount of information within the organization. Unexpectedly, agents who share acquire more information than hoarders. This is due to the synergy that develops between groups of agents who are sharing with each other. The density of the agents is important-as the density increases, the probability increases that …

Using Reconstructability Analysis For Input Variable Reduction: A Business Example, Stephen Shervais, Martin Zwick

Complex Systems Faculty Publications and Presentations

We demonstrate the use of reconstructability analysis (RA) on the UCI Australian Credit dataset to reduce the number of input variables for two different analysis tools. Using 14 variables, an artificial neural net (NN) is able to predict whether or not credit was granted, with a 79.1% success rate. RA preprocessing allows us to reduce the number of independent variables from 14 to two different sets of three, which have success rates of 77.2% and 76.9% respectively. The difference between these rates and that of the 14-variable NN is not statistically significant. The three-variable rulesets given by RA achieve success …

Development And Implementation Of The Bring Your Own Water Treatment System In Dense, Rural, And Mountainous Rwandan Communities, Maximilian Gold, Evan A. Thomas, Richard L. Byyny, Jean Pierre Habanabakize

Mechanical and Materials Engineering Faculty Publications and Presentations

Over a billion people in the world lack access to safe drinking water1. While numerous technological, medical, and educational solutions have been implemented for the benefit of disadvantaged communities, there is no 'magic bullet'. Instead, development agencies must partner directly with these communities to address their public health needs through appropriate technology solutions, backed up by education and assessment. The "Bring Your Own Water (BYOW) Treatment System" developed by the Engineers Without Borders-USA chapters at the University of Colorado at Boulder Chapter (EWB-CU) and the Johnson Space Center (EWB-JSC) is uniquely designed to address the water treatment requirements of two …

Engineering Education Through Service-Learning In Developing Communities: Two Case Studies, Evan A. Thomas, Andrew Azman

Mechanical and Materials Engineering Faculty Publications and Presentations

This paper provides case studies of two service learning projects that University of Colorado at Boulder (CU-Boulder) students are integrating into their academic experience. The projects focus on developing communities and are managed under the auspices of Engineers Without Borders-USA (EWB-USA), a group founded by Dr. Bernard Amadei, Professor of Civil Engineering at CU-Boulder. These projects expand students? understanding of the social value of their chosen profession, and expose them to a type of engineering significantly different than what is presented in most of their classes. Specifically, focusing on developing communities provides students with the opportunity to design solutions to …