Operations Research, Systems Engineering and Industrial Engineering Commons^™

Integrating The First Person View And The Third Person View Using A Connected Vr-Mr System For Pilot Training, Chang-Geun Oh, Kwanghee Lee, Myunghoon Oh

Journal of Aviation/Aerospace Education & Research

Virtual reality (VR)-based flight simulator provides pilots the enhanced reality from the first-person view. Mixed reality (MR) technology generates effective 3D graphics. The users who wear the MR headset can walk around the 3D graphics to see all its 360 degrees of vertical and horizontal aspects maintaining the consciousness of real space. A VR flight simulator and an MR application were connected to create the capability of both first-person view and third-person view for a comprehensive pilot training system. This system provided users the capability to monitor the aircraft progress along the planned path from the third-person view as well …

How Does Robotic Surgery Influence Communication, Leadership, And Team Outcomes? A Multimethod Examination., Jordan E. Rogers

Doctoral Dissertations and Master's Theses

The practice of delivering surgical care has evolved to be less invasive to the patients undergoing surgery. Minimally-invasive surgery can be practiced through traditional laparoscopic methods as well as with robotic technology that displaces the surgeon from the operating table. Robotic surgery has been cited to be safer and more effective than traditional laparoscopic surgery; however, little research has endeavored to investigate the role of surgical modality upon aspects of teamwork. This dissertation contributes to the human factors and teamwork literature by evaluating how surgical modality may influence communication, shared leadership, and team outcomes. Multiple methods were employed to study …

Gender Differences And Cockpit Design, Susan Archer, Heidi Brewer, Stacie Fain, Stephanie Smith

Student Works

The design project reported in this paper examined female pilots’ experiences with how well or poorly cockpit design allowed them to safely accomplish their flying missions. The general aviation aircraft cockpit is not designed for female pilots, often causing them to find ways to adapt to the cockpit in order to operate the aircraft safely. Two primary focal areas for adaptations address issues with accessibility of controls and “viewability” inside and outside the cockpit. The design team used a Situation Awareness-Oriented Interface Design (SAOD) approach in preparing cockpit design recommendations for general aviation aircraft that would accommodate female pilots.

Application Of Mounting Personal Pid Voc Sensors To Small Unmanned Aircraft Systems To Aid First Responders, Cheri Marcham

Publications

Small Unmanned Aerial Systems in Emergency Response

• Current sUAS Uses
• Search and rescue
• Thermal imaging
• Evaluating structural stability
• Spread of wildfires
• Storm damage

Efficiency Analysis Of A Congested Brazilian Airport Applying Slots Optimization Control: Congonhas Airport Case, Mariana Franco B. Mendes, Rafael Roco De Araujo, Ana Paula Beck Da Silva Etges, Massoud Bazargan

International Journal of Aviation, Aeronautics, and Aerospace

The current slot allocation mechanism in Brazil, based on the International Air Transport Association (IATA) rules, and its supplementary local regulation The National Civil Aviation Agency (ANAC), displays a few issues and limitations (e.g. slot misuse, allocation inefficiencies). Such issues are particularly present in the case of busy airports that works near their maximum capacity for major parts of the day. This inefficiency problem is generated because of the complexity of slot allocation added to the limited decision support available for the Brazilian system. This study focuses on the implementation of an optimal slot model, based on IATA regulations with …

Uas For Public Safety Operations: A Comparison Of Uas Point Clouds To Terrestrial Lidar Point Cloud Data Using A Faro Scanner, Joseph S. Cerreta, Scott S. Burgess, Jeremy Coleman

International Journal of Aviation, Aeronautics, and Aerospace

Unmanned Aircraft Systems (UAS) can be useful tools for public safety agencies during crime or vehicle accident scene investigations if it can provide value to the resource-constrained agency. The speed of data collection, while minimizing first responder risk, while sustaining an acceptable level of accuracy and precision compared to other tools is where the agency may find value. During a recent homicide investigation in Florida, a UAS provided saved 81% in law enforcement labor hours with an acceptable level of accuracy compared to traditional methods. The purpose of this research was to compare UAS to determine if there were differences …

Suborbital Payload Testing Aboard Level 3 Rocket Research Platform, Pedro Llanos, Sathya Gangadharan, Nikita Amberkar, Isachi Halphen, Melisa Mastroliberti, Michelle Munasinghe

Publications

Embry-Riddle Aeronautical University (ERAU) has launched several suborbital scientific payloads aboard Blue Origin’s New Shepard in 2017 and 2019. Students continue gaining hands-on experience in rocket design and construction, and payload integration and testing of future and more mature payloads to be launched into space. A Level 3 Rocket is being designed and developed at ERAU to serve as a scaled-down model research platform for launching and testing of payloads that will be later flown in commercial suborbital platforms such as Blue Origin’s New Shepard and PLD space Miura 1 rockets. Computer simulations were conducted to calculate the key parameters …

Effects Of Musical Ability On Flight Planning, Situational Awareness, And Flight Path Deviations, Andrew P. Henry

Doctoral Dissertations and Master's Theses

Numerous studies have been conducted on music education and the benefits that learning an instrument has on the brain. However, there is little research that connects a pilot’s ability to play an instrument to a pilot’s ability to fly an airplane. When learning an instrument, students learn non-musical abilities, such as executive functions, which may correspond with the skills necessary to be a good pilot. The purpose of this study was to find a relationship between learning a musical instrument and pilot performance, specifically related to flight planning, situational awareness, and flight path deviations. This study was a quasi-experimental design …

Fiber-Reinforced Polymer Bridge Girders For Extremely Aggressive Environments, Abdellah Emad Azeez

Doctoral Dissertations and Master's Theses

In 2012, the federal government estimated that $17.5 billion was spent on inspection, rehabilitation, maintenance, and replacement of the nation’s bridges. While the average lifespan of steel and reinforced concrete bridges is 50 years, certain bridges subjected to extremely aggressive marine environments may not reach this desired target. This research paper investigates using fiber-reinforced polymer (FRP) materials as primary bridge girders in medium span bridges (30 ft. to 75 ft.). The goal of this research is to identify the most efficient and cost-effective alternative for these corrosion-resistant materials and potentially extend the lifespan of these bridges up to 75 years. …

Analogies And Comparisons For Stm Data Bodies, Phillip M. Cunio, Brien Flewelling

Space Traffic Management Conference

Space Traffic Management (STM) has already demonstrated its potential to be extremely data-intensive. The large number of objects on orbit today, if observed constantly throughout their lifetimes, could produce a staggeringly large number of observations that might in turn generate large numbers of orbits. Orbit data with a lengthy time history can be used to produce estimates of maneuver frequency, susceptibility to natural forces such as drag, and (if combined with photometric data) assessments of behavioral patterns of life.

A future of mega-constellations and a growing number of nations and organizations with assets on orbit would make it likely that …

A Statistical Approach For Commercial Space Vehicle Integration Into The National Airspace System, Christopher Hays, Daniel Chu, Pedro Llanos

Space Traffic Management Conference

This paper explores commercial space vehicle (CSV) suborbital flight trajectories in the temporal and spatial domains for CSV integration into the National Airspace System. The research data was collected via the Suborbital Space Flight Simulator (SSFS) housed in the College of Aviation at Embry-Riddle Aeronautical University - Daytona Beach campus, and analyzed using an original MATLAB data analytics tool. This study primarily focuses on statistical trends observed in previously simulated flights supported by three Project PoSSUM (Polar Suborbital Science in the Upper Mesosphere) campaigns comprised of 34 flights and 19 control flights, and to identify relevant milestones in the CSV …

Enhancing Suborbital Science Through Better Understanding Of Wind Effects, Pedro Llanos, Diane Howard

Space Traffic Management Conference

This paper highlights the importance of understanding some key factors, such as winds effects, trajectory and vehicle parameters variations in order to streamline the space vehicle operations and enhance science in the upper mesosphere at about 85 km. Understanding these effects is crucial to refine current space operations and establish more robust procedures. These procedures will involve training new space operators to conduct and coordinate space operations in class E above FL600 airspace within the Air Traffic Organization (ATO).

Space vehicles such as Space Ship Two can spend up to 6 minutes in class E airspace above FL600 after launch. …

Evaluation Of Suas Education And Training Tools, Brent Terwilliger, Scott Burgess, James Solti, Kristine Kiernan, Christian Janke, Andrew Shepherd

Publications

The wide distribution and demographic composition of students seeking small unmanned aircraft system (sUAS) education presents a need to fully understand the capabilities, limitations, and dependencies of effective training tools. Concepts, practices, and technologies associated with modeling and simulation, immersive gaming, augmented and mixed-reality, and remote operation have demonstrated efficacy to support engaged student learning and objective satisfaction. Identification and comparison of key attributes critical to an aviation educational framework, such as competency-based training, enables educational designers to identify those tools with the highest potential to support successful learning. A series of factors, such as system performance, regulatory compliance, environmental …

Effects Of A Hand Luggage Guiding System On Airplane Boarding Time And Passenger Experience, Mirte Vendel, Sagar Dangal, Jessica Coppens, Suzanne Hiemstra-Van Mastrigt, Peter Vink

International Journal of Aviation, Aeronautics, and Aerospace

This research investigates whether a hand luggage guiding system in overhead bins decreases boarding time and improves boarding experience during aircraft boarding process. A guiding system was developed which allocates and displays the passengers luggage space in the overhead bin. The allocated space is guided by a light strip in front of the display that blinks when a passenger comes close to their allocated luggage space. This system was tested in a Boeing 737 test fuselage. Compared to regular boarding, a boarding time reduction of 16 to 23 seconds was estimated using the hand luggage guiding system in groups of …

Global Aviation System: Towards Sustainable Development, Marina P. Bonser Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Aviation around the world has integrated into a global system. As the integration process continues, more aspects and levels of it need to be lead towards the sustainable development of the whole system via advancing strategic management, global communication proficiency, and technological expertise. It becomes essential to enrich global language (English) proficiency with cross-cultural communication competence not only for communication in the air but also for airport security, passenger and cargo services, aircraft and equipage engineering, building, and maintenance. Nowadays lower levels of management need more advanced strategic thinking and problem solving skills, and higher levels of management need global …

Autonomous Airliners Anytime Soon?, Samuel M. Vance, Evan C. Bird, Daniel J. Tiffin

International Journal of Aviation, Aeronautics, and Aerospace

This research seeks to extend the body of knowledge on factors influential in the decision to fly on an autonomous airliner as a passenger. Only a handful of studies have probed this direct question in the last 16 years, but the data is showing a growing public acceptance of this type of travel. Pivotal in this consideration is the basic element of trust – trust in automated airliners and trust in the airline and Air Traffic Control systems which are responsible for autonomous airliners. Human trust has many forms and manifestations, but in the end, it is a dichotomous or …

Effects Of Exit Doors And Number Of Passengers On Airport Evacuation Effeciency Using Agent Based Simulation, Jie Chen, Dahai Liu, Sirish Namilae, Sang-A Lee, Jennifer E. Thropp, Younho Seong

International Journal of Aviation, Aeronautics, and Aerospace

Many factors determine the efficiency of evacuation at an airport during emergencies. These factors are very complicated and many times, unpredictable. The Federal Aviation Administration provides numerous advisory circulars and regulations for managing airport evacuation. However, a thorough literature review suggests that research on airport evacuation is still very limited. A study was designed to simulate an airport evacuation to address this problem. This study selected a local certificated airport in the United States for this purpose. We developed and validated a situation model using AnyLogic to investigate evacuation time at this airport. Using different variables, such as the number …

Aircraft Interior Design And Satisfaction For Different Activities; A New Approach Toward Understanding Passenger Experience, Golnoosh Torkashvand, Lucas Stephane, Peter Vink

International Journal of Aviation, Aeronautics, and Aerospace

Among airlines and aircraft manufacturers there is much attention for passenger experience. However, there is not much literature on how the activities of passengers can be supported by the aircraft interior. The current study focuses on the need finding and requirements analysis of flight passengers. Twenty-three activities were defined based on retrospective interviews and brainstorming sessions. Respondents were asked to rate their overall perception related to the importance of each of those 23 activities on a Linkert scale, from “not at all important” to “extremely important”. On a separate question they were also asked to rate their overall satisfaction by …

Identifying Criteria To Predict Army Rifle Marksmanship Proficiency, Katlin Makina Anglin

Doctoral Dissertations and Master's Theses

The United States Army requires each Soldier to develop marksmanship proficiency in an effort to achieve combat readiness. Soldiers currently develop marksmanship proficiency through Basic Rifle Marksmanship (BRM) training, but significant skill deficiencies are apparent at the end of training. These skill deficiencies remain throughout training because instructors rarely assess Soldiers objectively before the final qualification, reducing the opportunity for instructors to diagnose skill deficiencies until it is too late. Therefore, the goal of the current research is to identify individual differences and sensor-based performance measures for inclusion in a formative assessment during BRM training. The results of the current …

Effects Of Lighting And Noise On Performance And Situation Awareness In An Air Traffic Control Task, Saralee Pruksaritanon, Andrew Dattel Ph.D., Steven Hampton Ed.D.

National Training Aircraft Symposium (NTAS)

Work environment influences an individual’s performance and situation awareness (SA). This study aims to investigate the effects of lighting and noise levels on performance and situation awareness in an air traffic control (ATC) task. These two variables are important in the domain of ATC because the task requires an individual to receive and process information both visually and auditorily. The results are useful for designing air traffic control rooms, which are set differently among different air navigation service providers. The subjects are 16 students majoring in Air Traffic Management (ATM) at Embry-Riddle Aeronautical University (ERAU) – Daytona Beach, FL. The …

An Optimal Airline Revenue Management Seat Pricing Plan Model, Constantine M. Koursaris, James W. Marion Jr.

International Journal of Aviation, Aeronautics, and Aerospace

The goal of an airline is to sell tickets at the highest fare possible, thus yielding maximum profit for the stakeholders. As airline seat pricing is divided into different fare classes, a revenue management system is created and maintained to identify opportunity costs where the airline may sell an optimum number of available seats in both discounted fare and full fare classes. Ideally, under perfect conditions, the airline will sell all available seats at full capacity for each leg of a trip. Under non-ideal conditions for the airline, not all available seats may sell at either full fare or discounted …

Ranking Of Human Senses In Relation To Different In-Flight Activities Contributing To The Comfort Experience Of Airplane Passengers, Joyce Bouwens, Suzanne Hiemstra-Van Mastrigt, Peter Vink

International Journal of Aviation, Aeronautics, and Aerospace

Bubb, Bengler, Grünen, and Vollrath (2015) identified six environmental comfort factors and ordered them from most important to least important (smell, light, vibrations, sound, climate and anthropometry). This paper attempts to verify whether this suggested order of comfort-related factors also applies to the expectations of aircraft passengers. For this purpose, two studies were carried out. First, a survey was conducted among 183 aircraft passengers between 19 and 64 years old. In this survey, respondents were asked to rank six comfort factors by selecting the most important factor from 15 pairs of factors (e.g. light versus smell). The respondents indicated anthropometry …

Manufacturing Process Simulation – On Its Way To Industrial Application, Dennis Otten, Tobias A. Weber, Jan-Christoph Arent

International Journal of Aviation, Aeronautics, and Aerospace

Manufacturing process simulation (MPS) has become more and more important for aviation and the automobile industry. A highly competitive market requires the use of high performance metals and composite materials in combination with reduced manufacturing cost and time as well as a minimization of the time to market for a new product. However, the use of such materials is expensive and requires sophisticated manufacturing processes. An experience based process and tooling design followed by a lengthy trial-and-error optimization is just not contemporary anymore. Instead, a tooling design process aided by simulation is used more often. This paper provides an overview …

Effect Of Anthropometric Variability On Middle-Market Aircraft Seating, Tara C. Sriram

International Journal of Aviation, Aeronautics, and Aerospace

A middle-of-market aircraft, or MoMA, is defined as an aircraft capable of flying 180-250 passengers without refueling for 2,300-5,800 miles(~2,000-5,000 nautical miles). As the name suggests, middle-of-market aircraft are positioned in between the market segments served by narrow body (single-aisle) and wide body (twin-aisle) aircraft. This paper presents the findings of a study on the effect of anthropomorphic variability on economy class seating on middle-market aircraft currently in service. The study found that among 130 middle-market LOPAs, the mean seat pitch was greater for US airlines than for Asian airlines. Furthermore, the sampled Asian airlines had a higher preference …

Subjectivity In Failure Mode Effects Analysis (Fmea) Severity Classification Within A Reliability Centered Maintenance (Rcm) Context, Marc Banghart, Kari Babski-Reeves, Linkan Bian, Lesley Strawderman

International Journal of Aviation, Aeronautics, and Aerospace

This research paper investigated subjectivity in the severity rating of failure modes within a risk analysis process. Although several risk analysis processes can be utilized, the study considered the application of Failure Modes Effects Analysis (FMEA) or Failure Modes Effects and Criticality Analysis (FMECA) due to its common use within the Aerospace Industry. The study investigated both differences in severity selection given varying amounts of experience as well as any association between severity selection and the provided input information. The main goal of the research was to investigate the impact of data quality on severity selection and to identify factors …

Assessment And Comparison Of Aviation Manufacturing Industries Throughout Mexico And Brazil, Omar E. Morsi, Kelly A. Whealan-George, Aaron D. Clevenger

International Journal of Aviation, Aeronautics, and Aerospace

This literature review serves to provide insight and understanding in regards to the evolving aviation manufacturing industry throughout the globe and more specifically, Mexico and Brazil. Increased demand for aircraft units both in the commercial and private sectors have led to unprecedented expansions in aircraft manufacturing across the industry. In order to illuminate certain potentials and current growth levels of such industries, this review will delve into an array of information and specifications in regards to economic, political, and cultural influences throughout both Mexican and Brazilian markets respectively. In conclusion, the review will identify the transformation of an aviation manufacturing …

Unmanned Aerial Systems: Research, Development, Education & Training At Embry-Riddle Aeronautical University, Michael P. Hickey

Publications

With technological breakthroughs in miniaturized aircraft-related components, including but not limited to communications, computer systems and sensors, state-of-the-art unmanned aerial systems (UAS) have become a reality. This fast-growing industry is anticipating and responding to a myriad of societal applications that will provide new and more cost-effective solutions that previous technologies could not, or will replace activities that involved humans in flight with associated risks.

Embry-Riddle Aeronautical University has a long history of aviation-related research and education, and is heavily engaged in UAS activities. This document provides a summary of these activities, and is divided into two parts. The first part …

Uas Pilots Code – Annotated Version 1.0, Michael S. Baum, Kristine Kiernan, Donald W. Steinman, Ryan J. Wallace Ed.D.

Publications

The UAS PILOTS CODE (UASPC) offers recommendations to advance flight safety, ground safety, airmanship, and professionalism.6 It presents a vision of excellence for UAS pilots and operators, and includes general guidance for all types of UAS. The UASPC offers broad guidance—a set of values—to help a pilot interpret and apply standards and regulations, and to confront real world challenges to avoid incidents and accidents. It is designed to help UAS pilots develop standard operating procedures (SOPs), effective risk management,7 safety management systems (SMS), and to encourage UAS pilots to consider themselves aviators and participants in the broader aviation community.

The Effect Of Task Load, Automation Reliability, And Environment Complexity On Uav Supervisory Control Performance, Sarah M. Sherwood

Doctoral Dissertations and Master's Theses

Over the last decade, military unmanned aerial vehicles (UAVs) have experienced exponential growth and now comprise over 40% of military aircraft. However, since most military UAVs require multiple operators (usually an air vehicle operator, payload operator, and mission commander), the proliferation of UAVs has created a manpower burden within the U.S. military. Fortunately, simultaneous advances in UAV automation have enabled a switch from direct control to supervisory control; future UAV operators will no longer directly control a single UAV subsystem but, rather, will control multiple advanced, highly autonomous UAVs. However, research is needed to better understand operator performance in a …

Identification Of Reverse Engineering Candidates Utilizing Machine Learning And Aircraft Cannibalization Data, Marc Banghart

International Journal of Aviation, Aeronautics, and Aerospace

As military aircraft continue to remain in service and age, cannibalization of parts is increasing. Proactive identification of parts that are at high risk for cannibalization will inform engineering processes such as reverse engineering, thus allowing potentially reducing lead time to develop new parts. The research objective was to develop a causal structure that can be used for prediction of when cannibalization actions may occur. Bayesian networks allow encoding of causality between various descriptive features given a data set. The method utilized a tabu search algorithm, identified the underlying causal structure and the associated node probabilities. The method is then …