Operations Research, Systems Engineering and Industrial Engineering Commons^™

Low Cost Slab Manufactured From Masonry Slab Elements, John Makunza

Tanzania Journal of Engineering and Technology (TJET)

The construction of bungalow houses requires sufficient space to accommodate all the requirements as per the client’s wish. The idea of low-rise or high rise buildings is very remote for most of the people due to the high costs of construction involved. Much of the said cost is due to the concrete floor slab as it consumes a bigger portion of concrete material when compared to beams and columns. In this paper, a study presented is on a new form of voided slab constructed from masonry slab elements that do not utilize formwork and consumes less concrete material. The slab …

Categorizing High Energy Laser Effects For The Joint Munitions Effectiveness Manual, James A. Markham

Theses and Dissertations

With the high risk and cost in fielding High Energy Laser (HEL) weapon systems, the development process must include computer simulation models of weapon system performance from the engineering level up to predicting the military worth of employing specific systems in a combat scenario. This research effort focuses on defining how to measure lethality for HEL weapons in an Advanced Tactical Laser (ATL) scenario. In order to create an effective measure for direct comparison between the emerging laser weapon system and existing conventionally delivered weapons, lase time in seconds is presented as a measure comparable to rounds required to cause …

Software Development Project Risk Management: A Literature Review, Kevin Macg. Adams, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

The rapid and unprecedented growth in software has brought with it some of the most spectacular and costly project failures in modern history. How risk management is presented in the scholarly journals may give insight into the risk management methods and techniques in use on software development projects. This paper provides a glimpse into the risk management methods, methodologies and techniques available to those who are responsible for software development projects by conducting a non-experimental content analysis. The findings reveal that risk management has not received sufficient attention and does not appear to be widely accepted within the software engineering …

Participatory Evaluation And Improvement Of Cassava Processing Machines For The Eastern Zone Of Tanzania, V Silayo

Tanzania Journal of Engineering and Technology (TJET)

Cassava processing machines previously introduced in Tanzania were chippers and graters of the International Institute Of Tropical Agriculture (IITA) design. Popularization of such machmes in Tanzania required thorough participatory testing with stakeholders. When tested with farmers in Muheza and Kibaha districts average throughputs were 11-18 kg/h, 752 kg/h and 270 kg/hfor the manual chipper, engine-powered chipper and the engine-powered grater, respectively. Despite their low throughputs the manual chipper and the grater were Veo difficult to operate, and therefore demanded improvement. Improvement on these machines included modifications on the design for increased throughput, ease of operation and safety. The improved machines …

Usefulness Of Technology Life Cycle In Tanzania: The Case Of The Ipl Developed Technologies, Abdallah Chungu

Tanzania Journal of Engineering and Technology (TJET)

This study sought to identify the adoption rate of technologv innovations developed by the Institute Of Production Innovation (IPI) at the University Of Dar-es-Salaam since 1984 to 1997 using a sigmoid shaped curve (S-shaped curves) to predict the life cycles of the respective technologies. Depending on the stimuli imparted to the specific technology, some of such technologies for instance, cinva ram and block making machines with hollow/spacer/louver exhibited longer life period as indicated by a series Of infer-connected S-curves. Other technologies including but nor limited to sunflower oil processing kit-winnowers, scorcher with one stove, seed roller, standard wheelbarrow, and manual …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Introduction Of Seismic Resistance Features In The Construction Of Buildings In Tanzania, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Available dara indicates that a greater part of Tanzania lies within a seismic region. to date most Of the buildings in the country have been designed and constructed without considering seismic loads. In addition no design codes have been developed to guide the seismic design for buildings and other related structures in Tanzania. This paper outlines the basic design concepts, which are useful during the design of seismic resistant buildings before the seismic design code is developed and adopted in Tanzania.

Importance Of Structural Fire Protection In Reinforced Concrete Buildings: A Case Study Of Ex-Nasaco Building In Dar Es Salaam, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Reinforced concrete is concrete that is internally reinforced with steel bars or mesh. This gives rhe malerial the compressive strength of concrete along wilh the tensile strength Of steel. Reinforced concrete does not perform well under fire conditions as it spalls and loses strength. Heating Causes a failure Of the bond between concrele and sleels bars and this results in reduction of strength of concrele. Strength of concrete decreases With increase in temperature and increase With time. In order to provide fire resistance to structural components/elements in buildings, it is important Io consider the type of aggregates to be used. …

The Shipboard Office' : The Role Of It And Multi-Media Systems In Managing Engineering Operations And Maintenance Onboard Ship, Okechukwu Ebere Sylvanus Obara

World Maritime University Dissertations

This dissertation is an investigation of the roles of information technology and multimedia systems in the management of engineering operations and maintenance onboard ships. It considers the implications and constraints of adopting these technology tools on the economies of ship owners or managements companies, Maritime Administrations, and the Maritime Education and Training Institutions, especially in the developing countries. The study reviews the various shipboard maintenance policies and management techniques currently being practised in the traditional shipboard office with a view of understanding its constraints and the needs of adopting the various technological tools and systems. It also examines critically, the …

A Study Into Lack Of Product Innovation And Business Techniques At The Tricycle Workshop And Rrs Lessons To Small Companies, E Elias

Tanzania Journal of Engineering and Technology (TJET)

A study was carried out at the Tricycle Workshop (TW) which was facing the problem of !ack of orders and therefore stagnation Of business. The objective of the study was to find out reasons for this situation and to propose possible remedial solutions. The study was conducted using the principles of the Product Innovation process where internal and external issues related to the business Of the company were investigated for information. Analysis Of information obtained indicated that the bad situation of the TW had mainly been caused by the nature of the tricycles-supply system whereby users (disabled persons) are unable …

Incorporating Heterogeneity In Command Center Interactions, Holly A. H. Handley, Alexander H. Levis

Engineering Management & Systems Engineering Faculty Publications

One of the many complexities of multinational coalition operations stems from differences in culture, military procedures, and command and control processes between the cooperating command centers. These differences can influence the interactions between decision makers of different command centers and can affect the outcome of the coalition operation. A coalition model, composed of individual models of the five-stage interacting decision maker model, was used in a virtual experiment. The subjective parameters included in the decision maker model can be any attribute that characterizes the heterogeneity of the decision makers. In this case, the parameters of power distance and uncertainty avoidance …

Proposed Design Modifications To Reduce Risk Of Operating Rotary Field Mowers, Katie L. White, Larry G. Wells, Scott A. Shearer, Larry R. Piercy

Biosystems and Agricultural Engineering Faculty Publications

The primary objective of this project was to reduce risk of injury associated with operating a rotary mower driven by a tractor power take-off (PTO) by developing and evaluating design improvements and determining their economic feasibility. Researchers have concluded that alteration of machinery design has a greater impact on the reduction of accidents than safety training. Implementation of an Operator Presence Sensing System (OPSS) and removal of the PTO are the two injury-reducing, engineering modifications evaluated by this research. Hydraulic power allows this to occur by providing dynamic braking, few moving parts (removal of the PTO), and controllable power. A …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Multi-Discipline Network Vulnerability Assessment, Karilynne Wallace

Theses and Dissertations

Air Force Space Command has a mission to provide real-time, survivable, and enduring communications, surveillance, environmental monitoring, navigation, and warning....according to Air Force Space Handbook - A War Fighters Guide to Space. In order to prevent disruption of the critical networks in Space Command, a vulnerability assessment must be performed. The set of components called a vulnerability set, which could cause network disruption, must be identified and prioritized. In order to move beyond subjective prioritization, implementation of a quantitative methodology that measures the value of each vulnerability set is needed. This thesis proposes a technique for vulnerability assessment of a …

Analysis Of Usaf Medium And Heavylift Space Launch Mission Reliability Requirements, Arthur R. Dawkins

Theses and Dissertations

The launch services that the USAF procures to carry DOD payloads into orbit are characterized by high risks and high costs. If a launch vehicle experiences a catastrophic failure, the cost of the entire launch vehicle, the launch processing, and the payload are completely lost (often in excess of 1,5 billion dollars.) Despite this enormous risk for the payload customer, and indeed the launch provider, launch success rates around the world are not much above 90 percent. The current USAF medium and heavylift launch systems are often based on technology that is 20 years old and older. Furthermore, little historical …

Trends Of Microcomputer Technology In Developing Countries, With More Focus On Tanzanian Experiences: Achievements And Problems, Satoki Mahenge

Tanzania Journal of Engineering and Technology (TJET)

Trends of microcomputer technology in developing countries, including Tanzanian. is like a 'mixed bag' of achievement and problems. Although rhe technology has been available for many years in developed world, developing countries are responding to it differently due to differences in political and economic policies. Some countries have acrimonious policies on the technology, some not. There are countries which utilize fully the technology in work places and others are still at dilemma on the importation of the technology due to what is 'claimed to be a weak economy in the presence Of many other pressing needs'. Other countries seem to …

A Synthesized Methodology For Eliciting Expert Judgment For Addressing Uncertainty In Decision Analysis, Richard W. Monroe

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation describes the development, refinement, and demonstration of an expert judgment elicitation methodology. The methodology has been developed by synthesizing the literature across several social science and scientific fields. The foremost consideration in the methodology development has been to incorporate elements that are based on reasonable expectations for the human capabilities of the user, the expert in this case.

Many methodologies exist for eliciting assessments for uncertain events. These are frequently elicited in probability form. This methodology differs by incorporating a qualitative element as a beginning step for the elicitation process. The qualitative assessment is a more reasonable way …

Suitability Of The Present Strategic Information Technology Planning (Sitp) Methodologies To The Developing Countries, A Victor

Tanzania Journal of Engineering and Technology (TJET)

The needfor strategy formulation, or in general terms strategic planning, for IT is considered as one of the most important aspects of IT manage- ment. To this end, there are a number of IT strategy formulation method- ologies world-wide. These methodologies were developed over a span of time, starting from mid 1960's when IT use started to become a serious issue in the developed countries, and continued with the trends in IT de- velopment and use, as was applicable in those countries. Morc recent of the methodologies were developed through improvements on earlier ones, and based on the new challenges …

Development Of A Knowledge Based System For Wastewater Pipeline Failure Risk Assessment, Adam Mayanzani Ngaliga

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this thesis was to study and analyze the wastewater pipeline failure risk assessment process, and then design and develop an effective and efficient wastewater pipeline risk assessment tool for the Hampton Roads Sanitation District, in Virginia, U.S.A. A knowledge based system was developed using an expert system building shell (Xi-Plus).

The system design is based on the knowledge elicited from the experts and literature in sanitary pipeline failure risk evaluation. The knowledge base contains both heuristics and procedural rules. The system interprets the information provided by the user and reasons from that information to reach conclusions on …

Australian Spark Arrester Tests : Test No. Spa-21 : Caterpillar D7 Turbocharger, W F. Baillie, G. H. Vasey

Journal of the Department of Agriculture, Western Australia, Series 4

FORMAL tests on spark arresters are conducted by The Tractor Testing Committee* at the Testing Station, Werribee, on behalf of those Companies concerned with tractors, engines or spark arresters who wish to have these equipments tested.

The arrester is tested on the engine it is specially designed for (as in this instance), or if it is sold for use on any or several engines, it is tested on an engine of the highest power for which the spark arrester is intended.