Operations Research, Systems Engineering and Industrial Engineering Commons^™

Relationship Between Historic Evolution, Urbanization And Mobility In Ibadan, Nigeria, Aisha Adams

Tanzania Journal of Engineering and Technology (TJET)

Ibadan is said to be the biggest indigenous city in Nigeria with a population of about 4.04 million, making it the third largest city in the country after Lagos and Kano. Since its founding in 1829, Ibadan has experienced urban evolution that is mostly unguided. With its high fertility rate, population growth and rural-to-urban migration, Ibadan has experienced significant urban sprawl that has resulted in challenges in urban mobility especially to the lower-income earners. This study looks at the relationship between urban planning, urbanization and mobility in the city of Ibadan. The study found that lack of integrated land use …

Investigating The Relationship Between History, Urbanization And Wealth Gap In Johannesburg, South Africa, Abdallah F. Kaamah

Tanzania Journal of Engineering and Technology (TJET)

The city of Johannesburg is the largest city in South Africa and named as one of the economic drivers of the country. However, the city has the widest wealth gap in the country. This article examines the relationship between historical occurrences, urbanization, and the resulted wealth disparity in Johannesburg and look at the mitigation measures. The findings point to the wealth disparity in the city as a multifaceted problem influenced by historical, urbanization, and political variables. Comprehensive and multifaceted policy initiatives are required to address the structural causes of inequality and the urgent needs of vulnerable populations to close the …

An Analysis Of Electrical Energy Resilience Technologies As Applied To Air Force Operations, Eric D. Danko

Theses and Dissertations

An analysis of 46 Resilient Energy Devices and Technology Concepts was conducted to determine their suitability for use in supporting Air Force Operations both at home station and abroad. The research consisted of two endeavors: an extensive literature review and a rank-ordering matrix. The dual nature of the efforts was designed to maximize usability and understanding for the End User, who may not be familiar with some principles of energy technologies, resilience, or design. The results showed the superiority of novel Solid (Metal) Fuels and Lead-Acid Batteries for Energy Storage and Thermoelectric Generators, Solar Photovoltaic Panels, Geothermal Extraction, Diesel Generators, …

Evaluation Of Business-Driven Reference Architecture For Big Data Analytics Implementation By Public Sector Organizations In Resource-Constrained Setting: A Case Study Of Uganda, Matendo Didas

Tanzania Journal of Engineering and Technology (TJET)

Big Data Analytics (BDA) is a new area at the nexus of agenda, public sector organizations, and government business. It may satisfy the growing need for trustworthy, cost-effective services in the public sector for better, more informed decision-making processes. BDA has been proposed on the planning schedules of several public sector organizations and the government. Therefore, from the previous work, using Uganda as a case study, specifically the Uganda Bureau of Statistics (UBOS), Ministry of Health (MoH), and Ministry of Education and Sports (MoES), this study aims to evaluate a designed Business-Driven Reference Architecture for Big Data Analytics Implementation (BRABDAI) …

Modeling The Influence Of Internal Factors On Vehicular Mobility Performance, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Traffic mobility is significantly influenced by road conditions and the internal factors governing vehicular performance. Internal factors play a crucial role in vehicular mobility, influencing vehicles operate and performance. While existing vehicular mobility models primarily address external factors, external factors such as governor, engine, gear train and differential unit remain underexplored. This study formulates a comprehensive model to address this gap, focusing on the internal components that affect vehicular mobility. The proposed model employs both analytical and numerical methods to derive transfer functions for these subsystems using Matrix Laboratory (MATLAB), aiming to capture the dynamic behavior of vehicles under various …

Exploring The Transformation Of Sustainable Collective Spaces: A Study From Mlalakuwa Informal Settlement, Jacob Lutta

Tanzania Journal of Engineering and Technology (TJET)

A major challenge in collective space transformation is addressing the complexity of informal urbanisation in developing countries. Using a case study approach, this paper examines the concerns related to a particular informal settlement's sustainable collective space transformation. One of the key findings is that the absence of formal rules and regulations in the development of informal settlements in combination with land-grabbing leads to the absence of open spaces that could be used collectively. It is observed that sustainability in urban development is another body of critical thought that integrates several streams of current urban elements and embodies various conceptions of …

Investigation Of Heavy Metal Composition And Associated Health Risks From Selected Groundwater Wells In Temeke, Dar-Es-Salaam, Justin M. Jeremiah

Tanzania Journal of Engineering and Technology (TJET)

Water quality continues to be the challenge to residents in Dar es Salaam due to various anthropogenic activities in the city. This study was conducted to assess groundwater quality by determining concentrations of heavy metals. Both probability and Nonprobability sampling techniques were used to collect samples from 40 groundwater wells in 24 wards of Temeke municipal and analysed using Microwave Plasma Atomic Emission Spectrometer (Agilent 4210 MP-AES) at the Geochemistry Laboratory of the University of Dar es Salaam. Results indicated varying heavy metal concentrations ranging from 0.71 ± 0.08 to 6.64 ± 0.21 mg/l for As, 0.02 ± 0.01 to …

Development And Testing Of Small-Scale Flash Dryer For Maize Bran, Eden Ngowi

Tanzania Journal of Engineering and Technology (TJET)

Sun drying is the most common technique used to dry various food products due to its economic convenience. However, it is not effective owing to its unreliable nature leading to microbial deterioration and aflatoxin contamination of food. In Tanzania, about 1.3 million tonnes of maize bran are at risk of deterioration annually due to improper drying. The aim of this study was to design, fabricate and test an efficient small-scale flash dryer for maize bran. Using principles of material and energy balance, a small-scale flash dryer with a throughput of 500 kg of dry product per hour was designed resulting …

Investigations Of Cell Tower Antennas Parameters On Reduction Of Radio Frequency Radiation Levels From Radio Base Stations, Florence U. Rashidi

Tanzania Journal of Engineering and Technology (TJET)

The widespread deployment of mobile cellular base stations in populated areas has raised public health concerns due to increased exposure to radio frequency (RF) radiation emissions. Exposure to high levels of RF radiation can have potential thermal and non-thermal biological effects. Optimizing the configuration of cell tower antenna parameters is crucial for mitigating these radiation levels. This study therefore aims at systematically investigating the influence of different cell tower antenna parameters on reducing the RF radiation levels from mobile base stations. Field measurements were conducted at two cell sites shared by multiple mobile operators. Electric field strengths were measured at …

Necessity Of Education For Efficient And Sustainable Production And Consumption Of Energy In Tanzania, George Kahangwa

Tanzania Journal of Engineering and Technology (TJET)

This paper reports the findings of a study that was conducted in Tanzania to grasp how the policies, plans and curricula at different levels of education accommodate knowledge gathered on energy to support the fostering of energy education. The study interrogated what necessitates the inclusion of energy education into the curricula in Tanzania. Subscribing to a qualitative approach, the study employed a desk research method to review curricula and other documents guiding secondary and university level education in the country. The study found out that heightening people’s consumption of energy for domestic and industrial purposes constituted the main issue that …

Assessing The Importance Of Air-Decking Blasting In Controlling Bigv At An Open Pit Gold Mine In Tanzania Using Ann Model, Karim R. Baruti

Tanzania Journal of Engineering and Technology (TJET)

Air-decking blasting technique is used to control blast induced ground vibration (BIGV) in several mines including open-pit gold mines located in Tanzania. While the importance of air-deck to control BIGV is practically evident, theoretical models such as BIGV prediction models cannot be used to assess the importance of air-decking. The main objective of this study was to assess the importance of the air-decking blasting technique to control BIGV using the artificial neural network (ANN)Model. To achieve this objective, ANNs were modeled and trained to learn the pattern of data using Multilayer Perception with Back Propagation to predict BIGV. The main …

The Effects Of Corporate Culture On Firm Growth: Evidence From Tanzania’S Construction Firms, Fred P. Okangi

Tanzania Journal of Engineering and Technology (TJET)

Corporate culture is one of those important aspects that determine the growth of firms. This study investigates the effects of the different types of corporate culture on the growth of Tanzania’s local construction firms. A survey of 227 Tanzania’s construction firms was undertaken using semi-structured questionnaire. The data collected were quantitatively analysed using Stata 13.0 software. The study results indicate that only the hierarchy type of corporate culture positively and significantly impacts the growth of Tanzania’s construction firms. The other types of corporate culture, such as adhocracy, market, and clan had insignificant effects on the growth of the construction firms …

Perona-Malik Diffusion-Driven Regularization For Image Resolution Enhancement In Electrical Capacitance Tomography, Nassor Ally

Tanzania Journal of Engineering and Technology (TJET)

Electrical Capacitance Tomography (ECT) is a non-invasive promising method for monitoring industrial processes, such as oil-gas flow in pipelines and solid-gas flow in pneumatic systems. Despite its potential benefits, ECT generates poor-quality images, often used only for qualitative analysis. A non-linear relationship between measured capacitances and permittivity distribution and the ill-posedness of the sensitivity matrix elements causes this limitation. This hinders the applicability of ECT in monitoring online industrial process applications. This work proposes a reconstruction method based on a nonlinear diffusion function to generate high-quality images from the measured capacitance data from the ECT system. The diffusion regularization functional …

Safety And Risk Management Strategies For Achieving Regulatory Compliance In Construction Projects, Danny Rodriguez

Harrisburg University Dissertations and Theses

The architectural and construction business places great importance on safety and regulatory compliance because of its inherent high-risk nature and strict legal obligations. The prevalence of accidents and infractions at construction sites underscores the imperative for enhanced safety management systems and compliance with rules, notwithstanding substantial endeavors. The main objective of this study is to examine the many elements that impact the effectiveness of safety management, adherence to regulations, and the development of a safety culture, with the ultimate purpose of improving safety outcomes on construction sites.

The issue statement pertains to the difficulties associated with safety management and compliance …

Organizational Reliability And Resilience As A Dynamic System: Knowledge Modeling With Fuzzy Cognitive Maps, Antonie J. Jetter, Ahmed A. Alibage, Nan Peter Liang

Engineering and Technology Management Faculty Publications and Presentations

Safety research in complex environments recommends that high-hazard industries improve reliability and increase their capacity for resilience by enacting principles for high-reliability organizing (HRO). This view has been highly influential in many industries, ranging from aviation to hospitals, and is at the core of many safety culture programs. However, even though HRO principles originated in business practice and were observed in diverse organizations, practitioners frequently struggle to enact them in the contexts of their work. This is likely caused by two limitations of current research: principles are insufficiently specified and the interdependencies between them, such as mutually reinforcing vs. tradeoff …

Quantifying Relationships In Fuzzy Cognitive Maps Based On Content Analysis Of Unstructured Research Texts, Ahmed Alibage, Antonie J. Jetter, Elpiniki Papageorgiou

Engineering and Technology Management Faculty Publications and Presentations

FCM projects often rely on knowledge-based approaches, such as expert interviews, which can be challenging to conduct because they require extensive expert participation. We propose a novel alternative to create FCM models based on expert knowledge that is already codified in research texts and other publications. In this approach, thematic network analysis identifies FCM concepts and signed causal connections, while computation of t-coefficient is used to determine the weights of the identified edges. We introduce and evaluate the approach in the context of a real-world system modeling project that is based on 47 carefully selected, peer reviewed research publications on …

Virtual Engagement: Can Law Enforcement Benefit From Utilizing Extended Reality In Their Training Systems?, Jacob Maxwell Read

Electronic Theses and Dissertations

Introduction: Extended reality (XR) technologies offer innovative training solutions for various industries, including healthcare, manufacturing, aviation, sports, military, and law enforcement. XR can provide a solution for training where job tasks are difficult or near impossible to train in real-life. A human factors research and design approach could provide an effective, low-risk, and cost and time-efficient option for integrating the use of XR technology into training for many industries. To advance this goal, this research answered two main research questions: (1) What training needs/challenges are best suited for an XR training system designed for law enforcement officers (LEOs)? (2) …

Smart Grid Cybersecurity In The Age Of Artificial Intelligence, Chip Corbett, Charles M. Weber, Timothy R. Anderson

Engineering and Technology Management Faculty Publications and Presentations

The security of the power grid is essential for the proper function of a democratic society, yet it is constantly under threat. The internet of things (loT) will make a bad situation much worse. Misinformation, disinformation, and malinformation (MDM) have been identified as serious threats to our democratic institutions, and that same acronym applies to mobile device management (MDM), and these devices have become ubiquitous. People are notoriously bad at doing basic cybersecurity. With trillions of devices and remote access everywhere, what could possibly go wrong? Now add in the engaging opportunity of distributed energy resources (DERs) and life gets …

Enterprise Systems: Installing And Configuring Erpnext On Macos, Yazan Abbasi

Senior Honors Theses

Enterprise Resource Planning (ERP) systems integrate business processes across organizations onto unified digital platforms through data and workflow consolidation. However, high licensing costs of proprietary ERP solutions like SAP and Oracle limit adoption for small and medium enterprises. This led to the emergence of open-source ERP alternatives like ERPNext which provide sophisticated capabilities at much lower total cost of ownership. However, ERPNext faces documentation gaps that hamper onboarding, customization, and widespread adoption. Accelerating ERPNext implementation by developing a comprehensive installation and configuration guide tailored for developers using Mac environments will be examined furthermore.

The background on ERP systems explores critical …

How Ai And Digitalization Can Help To Improve Managing Projects In Lean Manufacturing & Supply Chain Environment, Abhijeet Hange

Harrisburg University Dissertations and Theses

This research examines how digitalization and machine learning (ML) revolutionize project management in supply chain and lean manufacturing settings. To improve the efficiency and caliber of their operational procedures, Acuity Brands, Amazon, Walmart, Apple, and other medium-sized businesses—which are at the center of today's competitive markets—are resorting to automation and digitalization. With an emphasis on the fusion of digital and artificial intelligence (AI), the paper explores how successful transformation initiatives are essential to the automation and digitization of manufacturing and distribution hubs. The study uses quantitative methods approach to evaluate the benefits and drawbacks of these technology integrations by integrating …

Great South Metals: Slitter Head Building Process, Nabhan Karim, Evan Swierski, Raven Morin, Patrick Kelsey, Michael Williams

Senior Design Project For Engineers

Great South Metals (GSM) operates two steel slitter machines, which take large coils of flat rolled steel and cut them into smaller strips for use in customers’ applications. Setting up the working components of each machine, called the slitter head, is a precise and arduous task. This system relies on several manually performed calculations and acute attention to detail; and thus, is prone to human error. The management at GSM commissioned our team to simplify the slitter head assembly process by creating an automated computer program and make additional recommendations to improve their operations.

The program we created is a …

A Transdisicplinary, Survivor-Centered Approach For Creating A System Dynamics Model Of Closed-Buyer Sex Trafficking Networks, Kemonte Yow

All Theses

One of the largest drivers of sex trafficking operations is the demand for commercial sex. To date, research from a quantitative side typically focuses on understanding how to best identify and remove victims from their trafficking situation and then support their healing and recovery. This may be because this is where data exists (in limited forms) to support quantitative modeling. This thesis broadens that scope to understand how demand for commercial sex impacts trafficking operations. In particular, this research implemented a transdisciplinary, survivor-centered approach to build a system dynamics model of a closed-buyer sex trafficking network, which is a network …

Modernization Of Water Flow Measurement In Open Irrigation Systems Using The Slope-Area Method, R.M. Aliev, Djalilov Anvar

Chemical Technology, Control and Management

This article describes two methods for determining water flow in open irrigation systems: “speed - area” and “slope - area”. The authors considered the problem of its modernization using the existing method for determining water flow “slope - area” in open irrigation systems. The essence of the issue is the remote transfer of parameters necessary for calculating water flow in open irrigation systems and improving the means of their processing. In scientific studies conducted by the authors, the required hydraulic parameters were studied using the “slope - area” and “speed - area” water flow methods. Based on experimentally obtained data, …

Sol-Gel Synthesis And Microstructure Characterization Of Nio-Tio2 Semiconductor, Godlisten N. Shao

Tanzania Journal of Engineering and Technology (TJET)

NiO-TiO2 is a fascinating p-n semiconducting binary metal oxide with unique electronic and optical properties. The NiO-TiO2 has been synthesized using complicated preparation methods and expensive precursors that hamper their large-scale production. The present study reports the preparation of NiO-TiO2 semiconductor with improved physicochemical properties. NiO-TiO2 samples were prepared through one-pot sol-gel synthesis process followed by sintering of the as-synthesized materials at temperatures ranging from 600 to 1000 °C. The role of thermal treatment and NiO content on the microstructures was exquisitely studied. The microstructure of the NiO-TiO2 samples was examined by Raman spectroscopy, XRD, XRF, SEM-EDAX, high resolution TEM, …

Sediment Characteristics And Hydrocarbon Composition Of Makukwa Seep In Southern Tanzania: Potential Implications For Subterranean Hydrocarbon Accumulation, Makungu M. Madirisha

Tanzania Journal of Engineering and Technology (TJET)

Exploring the interplay between natural seeps and nearby sediment and hydrocarbon properties is key to unlocking subsurface hydrocarbon potential. This study presents findings on the hydrocarbon composition and sediment characteristics of the Makukwa seep in southern Tanzania, providing insight into subterranean hydrocarbon accumulation. Sediment analysis across areas A and B, located approximately 20 m apart, showed a decrease in porosity with depth, indicative of typical sandstone formations. Area A, near the seeps, exhibited porosity ranging from 23% to 36%, whereas Area B, further away, showed porosity ranging from 22% to 38%. This suggests that a lower cretaceous sandstone layer may …

Design And Optimization Of An Azeotropic Distillation Pilot Plant For The Production Of Pure Ethanol, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to design an azeotropic distillation plant using Aspen Plus® V10 software and determine optimal process conditions for producing pure ethanol greater than 95% from pre-concentrated near-azeotropic ethanol-water solution. The non-random two-liquid Redlich-Kwong thermodynamic model was the base method for property analysis and performance prediction. Modelling and simulation of the converged process were conducted for fixed column variables (R = 5, N = 12 and p = 1 atm). Plant operating parameters were varied in the range of 0 to 1 for the pre-heater vapour fraction, 2 to 10 for the column feed plates (NFP), 2 to 6 …

Effect Of Zr And W Doping On Microstructures, Transition Temperature And Solar Transmittance Modulation Of Thermochromic W/Zr Co-Doped Vo2 Thin Films, Haji F. Haji

Tanzania Journal of Engineering and Technology (TJET)

Thermochromic W/Zr co-doped VO2-based thin films with different concentrations of Zr were successfully deposited on soda lime glass substrates by direct current (DC) magnetron sputtering of V(99)W(01) alloy and Zr targets at a substrate temperature of 425 °C. The films were characterized by x–ray diffraction (XRD), atomic force microscopy (AFM), Rutherford backscattering spectroscopy (RBS), two-point probe and UV/VIS/NIR spectroscopy. The film’s structural properties evolution was significantly influenced by Zr concentration in the films. The transition temperature and hysteresis loop widths of the films were found to decrease with increasing Zr concentration. For the Zr concentrations of 0.21 at.%, 0.23 at.% …

Optimal Load Shedding During Service Restoration In Electrical Secondary Distribution Network Based On Reinforcement Learning, Rukia J. Mwifunyi

Tanzania Journal of Engineering and Technology (TJET)

Increased stress in traditional power systems results in blackouts due to voltage instability attributed to a mismatch between available capacity and load demand, especially in distribution networks. Service restoration schemes are designed to return power supply to the affected parts of the networks. The availability of insufficient supply is a complex problem that requires operational experience or an automatic system. The stochastic nature of load demand significantly impacts service restoration as it results in increased restored demand in case a fault occurs during off-peak hours and helps reduce overload if the fault occurs during peak hours. The study adopts an …

Comparison Of Meteorological Drought Indices In Tanzania Using The Meteorological Drought Monitoring Software Package, Paul Ts Limbu

Tanzania Journal of Engineering and Technology (TJET)

Low precipitation, substantial evaporation, and an unequal distribution of precipitation throughout the area are the characteristics of drought, a climatic abnormality. This study used the Meteorological Drought Monitoring (MDM) software and monthly rainfall data from the Tanzania Meteorological Authority (TMA) to examine and compare the Deciles Index (DI), Standardised Precipitation Index (SPI), Percent of Normal Index (PNI), Rainfall Anomaly Index (RAI), Z-Score Index (ZSI), China-Z Index (CZI), and Modified China-Z Index (MCZI) for drought monitoring in Tanzania from 1988 to 2017. It was found that ZSI represented the dry years better than other indices, followed by DI, RAI, PNI, SPI, …

Evaluation Of Cybersecurity In Remote Working Settings For Mobile Network Operators, Victoria Mahabi

Tanzania Journal of Engineering and Technology (TJET)

Cybersecurity has increasingly been a primary concern to people as technology advances and allows them to work remotely. This study thus evaluated the cybersecurity posture for organisations that have opted for remote working culture, whereas emerging cyber threats, practices to combat them, and appropriate guidelines for managing cyber threats were discussed. The study used a descriptive design with a quantitative approach from 118 information technology personnel working for Tanzania's three major mobile network operators (MNOs). SPSS analysed the collected data. The study revealed that predominant cyber-threats affecting MNOs in remote working include human errors, phishing attacks, malicious domains, denial of …