Operations Research, Systems Engineering and Industrial Engineering Commons^™

Application Of Wavelets And Principal Component Analysis In Image Query And Mammography, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

Breast cancer is currently one of the major causes of death for women in the U.S. Mammography is currently the most effective method for detection of breast cancer and early detection has proven to be an efficient tool to reduce the number of deaths. Mammography is the most demanding of all clinical imaging applications as it requires high contrast, high signal to noise ratio and resolution with minimal x-radiation. According to studies [36], 10% to 30% of women having breast cancer and undergoing mammography, have negative mammograms, i.e. are misdiagnosed. Furthermore, only 20%-40% of the women who undergo biopsy, have …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Combining Wavelets And Hotelling Transforms In Image Query, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

In the "content based" image query, also referred to as "query by example," "similarity retrieval" or "sketch retrieval," the query image is provided by the user either as a sketch of the object, as the output of a scanner or a video camera. Some of the difficulties associated with content based image query are described in [1], e.g. significant difference between the "query image" and the "target image," artifacts and poor resolution of the query image make a straightforward comparison of images using L1 and l2 metrics not effective.

In [2] a new strategy is suggested based on wavelet decomposition …

Trends Of Microcomputer Technology In Developing Countries, With More Focus On Tanzanian Experiences: Achievements And Problems, Satoki Mahenge

Tanzania Journal of Engineering and Technology (TJET)

Trends of microcomputer technology in developing countries, including Tanzanian. is like a 'mixed bag' of achievement and problems. Although rhe technology has been available for many years in developed world, developing countries are responding to it differently due to differences in political and economic policies. Some countries have acrimonious policies on the technology, some not. There are countries which utilize fully the technology in work places and others are still at dilemma on the importation of the technology due to what is 'claimed to be a weak economy in the presence Of many other pressing needs'. Other countries seem to …

A Game-Theoretic Improvement Model For Stochastic Networks: Reliability Vs. Throughput, Jeffrey A. Schavland

Theses and Dissertations

Prescriptive models used to allocate resources for network improvement traditionally have used reliability or flow as Measures of Effectiveness (MOEs). Such metrics do not give value to efforts which make a component more difficult to exploit. This study developed an entirely new MOE for stochastic network improvement, flow damage utility, which uses a two person, zero-sum, non-cooperative game to optimize a probabilistic network for an estimate of expected flow minus performance degradation after a worst case component loss. A multiple criteria optimization problem that uses flow damage utility and an analogous, previously developed metric for the reliability problem is used …

Arts, Computers And Artificial Intelligence, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

Science and art seem to belong to different cultures. Science and technology, mainly the products of the intellect, use terminology and vocabulary that are concise and well defined. In contrast, in artistic expression, ambiguity is a powerful component. Still the relationship between these two different categories of human activity is interesting and fascinating. In this paper, a general comparison of these two disciplines will be introduced. Then the possibility of mechanical creation of art using computers and artificial intelligence will be discussed. This will be followed by two techniques which are used to create poetry and music. First, a statistical …

An Investigation Of Preliminary Feature Screening Using Signal-To-Noise Ratios, David B. Sumrell

Theses and Dissertations

A new saliency metric and a new saliency screening method are developed. This new metric, the SN saliency metric, is based upon signal-to-noise ratios, where the signal is provided by a sum of squared weights associated with a given feature, and the noise is based upon a sum of squared weights associated with a reference noise feature which is injected into the data. The resultant metric allows for a direct comparison of the feature of interest with a reference noise feature which is known to be nonsalient. The SN saliency screening method, which uses the SN saliency metric, offers the …

Incorporating Matlab's Signal Processing Toolbox Into A Dsp Course At An Undergraduate E.E. Program, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

This paper provides some suggestions for incorporating MATLAB's Signal Processing Toolbox into a DSP course. Often, in a DSP course, students have difficulties understanding abstract and non-intuitive concepts and seeing their relevance to the practical part of their curriculum. The tools offered by MATLAB's Signal Processing Toolbox, can help to make these concepts more tangible and provide a perspective for students. Some basic tools relevant to an undergraduate DSP course will be introduced, including examples of tool use and graphic results. The tools presented will be applied in the areas of synthesis and analysis of signals, FFT computation, impulse response …

An Investigation Into Manufacturing Execution Systems, K. W. Duley

Theses : Honours

Hardware and software developments of this decade have exposed an hiatus between business/management applications and process control in heavy industry in the implementation of computer technology. This document examines the development of discrete manufacturing and of relevant implementations of computing. It seeks to examine and to clarify the issues involved in a perceived current drive to bridge this gap, to integrate all the systems in a manufacturing enterprise in a Manufacturing Execution System (MES) in order to address two hypotheses: I) That overseas trends towards the development of manufacturing execution systems have application in the Australian industrial context. 2) That …

Using Matlab To Illustrate The 'Phenomenon Of Aliasing', Sol Neeman, Ph.D.

Engineering Studies Faculty Publications and Creative Works

The phenomenon of aliasing is important when sampling analog signals. In cases where the signal is bandlimited, one can avoid aliasing by ensuring that the sampling rate is higher than the Nyquist rate . But in cases where the signal is not bandlimited , aliasing is unavoidable if the signal is not filtered before it is sampled. It is then crucial to understand the phenomenon in order to estimate the distortion generated when the signal is reconstructed from its samples. Using the software package MATLAB by MathWorks, Inc ., two examples are presented. The first is a pure sinusoid which …

Evaluation Of The Influence Of The Magnetic System In Relays, D Chambega

Tanzania Journal of Engineering and Technology (TJET)

The paper evaluates the influence of different cores on the performance of relays. In particular two types ofc-cores, all made from IOW quality mag- netic steel, are considered. The two cores, one butt-constructed and the other interleaved, are mathematically modelled and the tesults are analyzed and obtained experimentally. Then the two sets of results are compared with those ofa c-shaped core of excellent magnetic material with the aim of qualifying the influence of the core material. It is observed that the method of constructing the core also influences the performance.

Power Shedding Experiences And Lessons In A Township, Alexander Kyaruzi

Tanzania Journal of Engineering and Technology (TJET)

This paper presents how power shedding by taking out one of the trans- former high voltage fuses causes phase imbalance. And for the same elec- nicc,l energy output generator fuel consuntption with unbalanced phases is 12.5% of The fuel consunwtion with balanced phases. Furthermore it is shown thal energy efficient lighting by use of energy efficient bulbs can reduce load shedding.

Implementation And Demonstration Of A Multiple Model Adaptive Estimation Failure Detection System For The F-16, Peter K. Eide

Theses and Dissertations

A Multiple Model Adaptive Estimation (MMAE) algorithm is implemented with the fully nonlinear six-degree-of-motion, Simulation Rapid-Prototyping Facility (SRF) VISTA F-16 software simulation tool. The algorithm is demonstrated to be capable of identifying flight critical aircraft actuator and sensor failures at a low dynamic pressure (20,000 ft, .4 Mach). Research included single and dual complete failures. Tuning methods for accommodating model mismatch, including addition of discrete dynamics pseudonoise and continuous measurement pseudonoise, are discussed and demonstrated. Scalar residuals within each filter are also examined and characterized for possible use as an additional failure declaration voter. Robustness to sensor failures provided by …

Dual Versus Single Spark Plug: A Critique, I Mshoro

Tanzania Journal of Engineering and Technology (TJET)

Dual spark plugs are occasionally employed on certain modern Spark lg- nited (S') engines, viz lean burn engines. Their benefit has generally been noticed in the operating conditions whenfuel-air mixture is very lean, or when a larger proportion of EGR has been employed, or during the part load conditions and so on. An extensive literature survey has indi- cared an interesting spectrum of reasons for gains due to the dual spark plug. A consistent explanation is found to be missing which can describe the behaviour of the engines with single versus dual spark plugs There are quite "few researchers who …

Suitability Of The Present Strategic Information Technology Planning (Sitp) Methodologies To The Developing Countries, A Victor

Tanzania Journal of Engineering and Technology (TJET)

The needfor strategy formulation, or in general terms strategic planning, for IT is considered as one of the most important aspects of IT manage- ment. To this end, there are a number of IT strategy formulation method- ologies world-wide. These methodologies were developed over a span of time, starting from mid 1960's when IT use started to become a serious issue in the developed countries, and continued with the trends in IT de- velopment and use, as was applicable in those countries. Morc recent of the methodologies were developed through improvements on earlier ones, and based on the new challenges …

A Check Parameter Method For Use In Designing Relays, H Kadete

Tanzania Journal of Engineering and Technology (TJET)

Low quality magnetic steel available locally has been successfully used as core material for a relay. New design principles as well as construction procedure used in development of a prototype are presented. Then the new approach is assessed and found to deliver acceptable accuracy.

Antecedents, Moderators And Outcomes Of Organizational Commitment, Beatus Kundi

Tanzania Journal of Engineering and Technology (TJET)

This study examined: (I) the impact of the BtruCturaI of tenure, job integration and organizational support on organizational (2) the mediating roles of the cultural values for performance and collectivity, and the intra—individual factorg of organizational identification and the norm of reciprocity Ln the relationahip between the structural factore and organization coamitment; and, (3) the relationghip between organizational cormitment and the ouecome variablen Of abøeneeeigm, turnover and The Bhow that job and Of the for performance a gignificant facilitator of the effecte Of the etructuraL factors on commitment; and organization identification and the norm of rec are important linkø in …

Reliability Trend Analyses With Statistical Confidence Limits Using The Luke Reliability Trend Chart, Stephen R. Luke

Engineering Management & Systems Engineering Theses & Dissertations

In electronic systems, it is interesting to understand exactly how the reliability is changing with time. Dynamic performance changes when a system passes from infant mortality stage into useful life phase and when the system passes from useful life phase into wearout phase. Dynamic performance also changes when the system is redesigned or when the system is acted on by a number of other outside forces such as a change in maintenance policy, escalation of alignment problems, or a change in training program. It is important to know when a system is changing dynamically in order to assess design, policy …

Developing Cmmca Flight Profiles For Cruise Missile Tracking, Andrew C. Hachman

Theses and Dissertations

The Air Force has recently acquired two aircraft dedicated for cruise missile tracking. These aircraft, known as the Cruise Missile Mission Control Aircraft (CMMCA), are responsible for collecting data from the missile and United States. Due to tracking and positively controlling the missile during live fire testing over the western the limited tracking radar range and the flight characteristics of the CMMCA, tracking cruise missiles through complex maneuvers is not always possible. A FORTRAN optimization, based on flight simulation and optimal control theory, was written in a prior thesis effort in order to determine optimal CMMCA flight profiles for tracking …

Factors Affecting Capacity Utilization In Industries: Hierarchical Analysis, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper provides a hierarchical analysis of the factors affecting capacity utilization in Tanzanian industries. Several factors were identified and sent to randomly selected industries in Tanzania for ranking. The collected data was summarized and analyzed. The analysis made use of a known procedure, the 'Analytical Hierarchy Process' (AHP). The final results shows a ranking of the factors, on various hierarchical levels as to their percentage contribution in lowering the capacity utilization.

Composite Stock Cutting Through Simulated Annealing, Pipatpong Poshyanonda, Cihan H. Dagli

Computer Science Technical Reports

This paper explores the use of Simulated Annealing as an optimization technique for the problem Composite Material Stock Cutting. The shapes are not constrained to be convex polygons or even regular shapes. However, due to the composite nature of the material, the orientation of the shapes on the stock is restricted. For placements of various shapes, we show how to determine a cost function, annealing parameters, and performance.

Composite Stock Cutting Through Simulated Annealing, Pipatpong Poshyanonda, Cihan H. Dagli

Computer Science Technical Reports

This paper explores the use of Simulated Annealing as an optimization technique for the problem Composite Material Stock Cutting. The shapes are not constrained to be convex polygons or even regular shapes. However, due to the composite nature of the material, the orientation of the shapes on the stock is restricted. For placements of various shapes, we show how to determine a cost function, annealing parameters, and performance.

A Robust Approach To Human-Computer Interface Design Using The Taguchi Method, Billie Mitchell Reed

Engineering Management & Systems Engineering Theses & Dissertations

The application of Dr. Genichi Taguchi's approach for design optimization, called Robust Design, to the design of human-computer interface software is investigated. The Taguchi Method is used to select a near optimum set of interface design alternatives to improve user acceptance of the resulting interface software product with minimum sensitivity to uncontrollable noise caused by human behavioral characteristics.

Design alternatives for interaction with personal micro-computers are identified. Several important and representative alternatives are chosen as design parameters for the Taguchi matrix experiment. A noise field with three human behavioral characteristics as noise factors were chosen as a representative noise array. …

Comparison Of Digital Controllers Used In Magnetic Suspension And Balance Systems, William A. Kilgore

Mechanical & Aerospace Engineering Faculty Publications

Dynamic systems that were once controlled by analog circuits are now controlled by digital computers. Presented is a comparison of the digital controllers presently used with magnetic suspension and balance systems. The overall responses of the systems are compared using a computer simulation of the magnetic suspension and balance system and the digital controllers. The comparisons include responses to both simulated force and position inputs. A preferred digital controller is determined from the simulated responses.

Assessment Of Squirrel-Caused Power Outages, J. Chris Hamilton, Ron J. Johnson, Ronald M. Case, Michael W. Riley

School of Natural Resources: Faculty Publications

Squirrel-caused power outages in Lincoln and Omaha, Nebraska, were evaluated by examining company power outage reports and by consulting with power company representatives. Reports showed that squirrel-caused outages at pole-mounted transformers were most prevalent during May, June, and October (48% of total) and between 1 and 4 h after sunrise (38%), patterns that coincide with squirrel dispersal or morning activity periods. In Lincoln, 1980 and 1981, squirrels caused 177 outages per year, which was 24% of all outages and 90% of animal-caused outages. Estimated minimum annual costs were $23 364 for repairs, public relations, and lost revenue while meters were …

Electric Power Transmission & Purchases : Report Of A Study By The Joint Standing Committee On Utilities, 112th Maine Legislature, Maine. Legislature. Joint Standing Committee On Utilities

Maine Collection

Electric Power Transmission & Purchases : Report Of a Study By the Joint Standing Committee on Utilities, 112th Maine Legislature

Maine Legislature. Joint Standing Committee on Utilities.

Augusta, Maine (December 2, 1986).

Contents: Introduction / Issues & Recommendations / Review of 1986 Legislation / Maine's Electric Power Picture / Technical Analysis of Transmission & Wheeling / Economic Implications of Transmission & Wheeling /. Legals Analysis of Transmission & Wheeling / Proposed Legislation / Appendices / Tables & Figures

Engineer Education: Disciplinary Preferences In The Faculty Of Engineering University Of Dar Es Salaam, S Mosha

Tanzania Journal of Engineering and Technology (TJET)

Most practising engineers can hardly recall the days they had to make up their minds on whether engineering was their chosen career. This decision may have been approached with ignorance and very high expectations. Later after registering in a Faculty of Engineering the freshman was given a chance to choose a department; sometimes this had already been done for him by his sponsors so all he had to do was to walk into the preselected department.

A generation later, University entrants are faced with a similar predicament. This paper high-lights the procedures involved and proceeds to recommend the necessary fundamental …

7th Annual Umr-Dnr Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

Performance Theorems For The Resource Scheduling Functions Of A Multiprocessing System, George Arthur Nicol

Dissertations and Theses

In this dissertation, a multiprocess scheduling model is developed and a set of performance theorems is constructed for the set of scheduling functions associated with the model. Each theorem describes the conditions under which a scheduling function exhibits a particular type of performance.

5th Annual Umr-Dnr Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This volume is a collection of refereed papers presented at the Fifth Annual UMR-DNR Conference on Energy held at the University of Missouri--Rolla on the dates of October 10 - 12, 1978.

Guided by the President's goal of energy independence by 1980, the UMR-DNR Conference on Energy organized in 1974 with the purpose of providing social scientists, scientists and engineers a means for rapid communication of their most recent research results in the field of energy and to offer solutions to the energy related problems of local government, business, industry and the general public. Since that time, there has been …