Operations Research, Systems Engineering and Industrial Engineering Commons^™

Design And Manufacture Of A Waste Compactor Prototype: A Step Towards Implementing A Non-Burn Health Care Waste Disposal In Developing Countries, Tito Mwinuka

Tanzania Journal of Engineering and Technology (TJET)

Non-burn technology is the only safe way of handling and disposing infectious healthcare waste. It involves steam treatment of infectious waste at temperatures higher than 121 o C for a minimum of 30 minutes before disposing them just like other municipal waste. Infectious healthcare waste is normally only about 10 25% of all healthcare waste. In this paper, design, manufacturing and testing of a waste compactor for reducing waste volume to facilitate its handling is discussed. Preliminary tests show that the waste volume can be reduced to less than 10% of its original volume using the developed compactor. Waste compactors …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Predicting Solar Performance In A Contingency Environment To Meet Net-Zero Facility Power, Anthony D. Williams

Theses and Dissertations

The U.S. government is involved in contingency operations all over the world and these operations require operational support and sustainment in these locations; this includes the reliable delivery of power to base infrastructure. The traditional means of delivering this support requirement in austere environments has been the use of diesel-power generation that has an extensive logistical and economic tail. The research sought out contingency solar applications that may be implemented and operated to offset the facility demand loads in the location to achieve net-zero power. This research explores the technical feasibility of a deployable photovoltaic microgrid to deliver power to …

Optimal Bidding Strategy For A Strategic Power Producer Using Mixed Integer Programming, Sayed Abdullah Sadat

USF Tampa Graduate Theses and Dissertations

The thesis focuses on a mixed integer linear programming (MILP) formulation for a bi-level mathematical program with equilibrium constraints (MPEC) considering chance constraints. The particular MPEC problem relates to a power producer’s bidding strategy: maximize its total benefit through determining bidding price and bidding power output while considering an electricity pool’s operation and guessing the rival producer’s bidding price. The entire decision-making process can be described by a bi-level optimization problem. The contribution of our thesis is the MILP formulation of this problem considering the use of chance constrained mathematical program for handling the uncertainties.

First, the lower-level poor operation …

Target Read Operation Of Passive Ultra High Frequency Rfid Tag In A Multiple Tags Environment, Zi Qin Phua

Theses and Dissertations--Mechanical and Aerospace Engineering

Passive ultra-high frequency (UHF) radio frequency Identification (RFID) has emerged as a promising solution for many industrial applications. Passive UHF systems are relatively inexpensive to implement and monitor, as no line of sight is required for the communication. There are several advantages to using a passive RFID system. For example, no internal power source is required to activate the tags, and lower labor costs and efficient multitasking operations are expected in a long term scenario. However, due to factors such as tag-to-tag interference and inaccurate localization, RFID tags that are closely spaced together are difficult to detect and program accurately …

Experimental Investigation Of Reading Passive Uhf Tags In A Multi-Tag Environment, Yi Zhou

Theses and Dissertations--Mechanical and Aerospace Engineering

Recently, the Internet of things (IoT) has emerged as a promising solution for several industrial applications. One of the key components in IoT is passive radio frequency identification (RFID) tags which do not require a power source for operations. Specifically, ultra-high frequency (UHF) tags are studied in this paper. However, due to factors such as tag-to-tag interference and inaccurate localization, RFID tags that are closely spaced together are difficult to detect and program accurately with unique identifiers. This thesis investigates several factors that affect the ability to encode a specific tag with unique information in the presence of other tags, …

Accuracy And Repeatability Of Single-Pose Calibration Of Inertial Measurement Units For Whole-Body Motion Analysis, Xavier Robert-Lachaine, Hakim Mecheri, Christian Larue, André Plamondon

Études primaires

Portable inertial measurement units (IMUs) are suitable for motion analysis outside the laboratory. However, IMUs depend on the calibration of each body segment to measure human movement. Different calibration approaches have been developed for simplicity of use or similarity to laboratory motion analysis, but they have not been extensively examined. The main objective of the study was to determine the accuracy and repeatability of two common single-pose calibrations (N-pose and T-pose) under different conditions of placement (self-placement and passive placement), as well as their similarity to laboratory analysis based on anatomical landmarks. A further aim of the study was to …

Sensitivity Analysis Method To Address User Disparities In The Analytic Hierarchy Process, Marie Ivanco, Gene Hou, Jennifer Michaeli

Mechanical & Aerospace Engineering Faculty Publications

Decision makers often face complex problems, which can seldom be addressed well without the use of structured analytical models. Mathematical models have been developed to streamline and facilitate decision making activities, and among these, the Analytic Hierarchy Process (AHP) constitutes one of the most utilized multi-criteria decision analysis methods. While AHP has been thoroughly researched and applied, the method still shows limitations in terms of addressing user profile disparities. A novel sensitivity analysis method based on local partial derivatives is presented here to address these limitations. This new methodology informs AHP users of which pairwise comparisons most impact the derived …

Image Data Mining For Quality Control Of Nanofiber Reinforced Piezoelectric Nanocomposites Based On Sem Images, Zhonghua Hu

Open Access Theses & Dissertations

Recently, portable and wireless nano-scaled devices have been widely used in environmental monitoring, medical implants, defense technology, industrial safety, and personal electronics, such as the nanowire-based gas and chemical sensors and programmable nanowire circuit for nano-processors. There has been an increasing demand for high energy density capacitors that can be engineered for various applications in advanced devices. In it, piezoelectric nanofiber materials play critical role in producing new products. A piezo-ceramic polymer composite contains a polymer of high dielectric strength and high permittivity ceramic inclusions, making it well suited as a high energy density capacitor. Furthermore, the research shows that …

Phased Helical Antenna Array For Cubesat Application, Kameron Lacalli

Undergraduate Honors Theses

CubeSats communication links are typically slow due to their power and size restrictions. However, a low power, high speed down link connection can allow for greater data collection and relaying, pushing the capability of 1U CubeSats beyond what is traditionally thought possible. Investigated here is the feasibility of a 11 Mb/s down link connection on a 1U CubeSat, accomplished via 2x2 helical antenna phased array operating on the 802.11 standard. Using a phased array also allows for beam steering to secure connection with the ground station when the on board ADCS may not provide precise pointing capability of the CubeSat, …

Photovoltaic Cooking In The Developing World, Tyler Watkins, Christopher O'Day, Omar Arriaga

Mechanical Engineering

The challenge of clean cooking is faced by hundreds of millions of people worldwide. We present a cooking technology consisting of a solar panel directly connected to an electric heater in a well-insulated chamber. Assuming continued decrease in solar panel prices, we anticipate that in a few decades Solar Electric Cooking technologies will be the most common cooking technology for the poor. Appropriate use of insulation reduces the power demand making low-power Insulated Solar Electric Cooking systems already cost competitive.

Optimal Demand Response Models With Energy Storage Systems In Smart Grids, Mohemmed Masooud Alhaider

USF Tampa Graduate Theses and Dissertations

This research aims to develop solutions to relieve system stress conditions in electric grids. The approach adopted in this research is based on a new concept in the Smart Grid, namely, demand response optimization. A number of demand response programs with energy storage systems are designed to enable a community to achieve optimal demand side energy management.

The proposed models aim to improve the utilization of the demand side energy through load management programs including peak shaving, load shifting, and valley lling. First, a model is proposed to nd the optimal capacity of the battery energy storage system (BESS) to …

Shape Analysis Of Traffic Flow Curves Using A Hybrid Computational Analysis, Wasim Irshad Kayani, Shikhar P. Acharya, Ivan G. Guardiola, Donald C. Wunsch, B. Schumacher, Isaac Wagner-Muns

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper highlights and validates the use of shape analysis using Mathematical Morphology tools as a means to develop meaningful clustering of historical data. Furthermore, through clustering more appropriate grouping can be accomplished that can result in the better parameterization or estimation of models. This results in more effective prediction model development. Hence, in an effort to highlight this within the research herein, a Back-Propagation Neural Network is used to validate the classification achieved through the employment of MM tools. Specifically, the Granulometric Size Distribution (GSD) is used to achieve clustering of daily traffic flow patterns based solely on their …

Impact Of Clustering Microgrids On Their Stability And Resilience During Blackouts, Mahmoud S. Saleh, Ammar Althaibani, Yusef Esa, Yassine Mhandi, Ahmed Mohamed

Publications and Research

In this paper, the impact of clustering multiple microgrids during blackouts, on their stability and supply availability, will be investigated. Microgrids have the capability of satisfying their emergency loads during blackouts. However, distributed energy resources (DERs)-dominated microgrids are affected by the uncertainty of their input energy supply, e.g. impact of solar irradiance on photovoltaic (PV) output. Moreover, an individual islanded microgrid is prone to instability issues due to large sudden load/generation changes. In order to increase the supply security, and enhance system stability, we propose to use the existing distribution grid infrastructure, if applicable, during blackouts to form microgrid clusters. …

Development Of A Habitat Monitoring System For Simulated Mars Missions, Rebecca Demarco

Human Factors and Applied Psychology Student Conference

The developers for the Habitat Monitoring System (HMS) for the Mobile Extreme Environment Research Station (MEERS) Mission Control System (MCS) faced challenges in the design and implementation of their human machine interface. Designing a human machine interface for a diverse group of end users presents technical and design challenges for the developers. By applying human factors concepts and following the engineering process, the development team was able to produce a human machine interface that met the product requirements and satisfied their product owners. This presentation discusses the process used by the development team to create the interface for the Habitat …

Creation And Implementation Of An Underwater-Capable Vr Headset Through The Use Of Additive Manufacturing, Matthew D. Meyers, Nathan Sonnenfeld

Human Factors and Applied Psychology Student Conference

No abstract provided.

Human Factors In The Development Of The Mobile Extreme Environment Research Station (Meers) Mission Control System (Mcs), Rebecca Demarco

Human Factors and Applied Psychology Student Conference

The developers for the MEERS MCS were required to develop a novel interface for their product. During the development of the MCS, analytical human factors methods and display principles were implemented to create the user interface. The methods and principles were also used so the MCS had a user centered design. The MCS went through several iterations of design. This presentation discusses the development process of the MEERS MCS from a human factors standpoint.

Electromechanics Of An Ocean Current Turbine, Vasileios Tzelepis

LSU New Orleans Theses and Dissertations

The development of a numeric simulation for predicting the performance of an Ocean Current Energy Conversion System is presented in this thesis along with a control system development using a PID controller for the achievement of specified rotational velocity set-points. In the beginning, this numeric model is implemented in MATLAB/Simulink® and it is used to predict the performance of a three phase squirrel single-cage type induction motor/generator in two different cases. The first case is a small 3 meter rotor diameter, 20 kW ocean current turbine with fixed pitch blades, and the second case a 20 …

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

LSU New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Reliable Power System Planning And Operations Through Robust Optimization, Wei Yuan

USF Tampa Graduate Theses and Dissertations

In this dissertation, we introduce and study robust optimization models and decomposition algorithms in order to deal with the uncertainties such as terrorist attacks, natural disasters, and uncertain demand that are becoming more and more signicant in power systems operation and planning. An optimal power grid hardening problem is presented as a defender-attacker-defender (DAD) sequential game and solved by an exact decomposition algorithm. Network topology control, which is an eective corrective measure in power systems, is then incorporated into the defender-attacker-defender model as a recourse operation for the power system operator after a terrorist attack. Computational results validate the cost-eectiveness …

Energy Harvesting And Storage: The Catalyst To The Power Constraint For Leveraging Internet Of Things (Iot) On Trains, Kelechi Nwogu

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

The success of Wireless Sensor Networks is heavily constrained by its reliance on storage technology like batteries, which are a finite resource. Whilst the number of transistors in an IC doubles every 18 months, the energy density of batteries is relatively flat during the same time period. This is a key challenge in leveraging the Internet of Things on trains.

The gravity of this problem is increased by an order of magnitude when the network is to be scaled up to hundreds or thousands of nodes. Comprehensive research and development efforts have been devoted to building ultra-low power sensors. These …

Detection And Recognition Of R/F Devices Based On Their Unintended Electromagnetic Emissions Using Stochastic And Computational Intelligence Methods, Shikhar Prasad Acharya

Doctoral Dissertations

"Radio Frequency (RF) devices produce some amount of Unintended Electromagnetic Emissions (UEEs). UEEs are generally unique to a device and can be thought of as a signature of the device. This property of uniqueness of UEEs can be used to detect and identify the device producing the emission. The problem with UEEs is that they are very low in power and are often buried deep inside the noise band which makes them difficult to detect. There are two types of UEE detection methods. The first one is called stimulated detection method where the UEEs of a device are enhanced using …

Wildlife Deterrence Method Test Device, Garrett Tietz, Adam Webb, Dane Knutson

Mechanical Engineering

The objective of the Deer Busters team is to design and build a device or system of devices that will be used to determine which method, or methods, are most effective at deer deterrence. JumpSport suspects that a method which gives the appearance of approach to the deer in an aggressive or startling manner but also changes the way it attacks so that the deer do not get used to the device will be most effective. Deer Busters is committed to the completion of the deer deterrent testing device by the end of the fall quarter of 2014.

Studies Of Imbalance Difference Theory In Modeling Conversion Between Differential Mode And Common Mode Signals, Li Niu

All Dissertations

This dissertation describes three related studies regarding the imbalance difference theory in modeling the conversion between differential mode and common mode/antenna mode signals. The topics covered are: rigorous derivation of imbalance difference theory for modeling radiated emission problems, modeling the conversion between differential mode and common mode propagation in transmission lines, and modeling the loading impedance on differential mode signals due to radiated emissions. The imbalance difference theory describes a method for calculating the coupling between differential mode signals and common mode signals due to changes in electrical balance on a transmission line. It provides both physical insight and a …

A Comprehensive Assessment Methodology Based On Life Cycle Analysis For On-Board Photovoltaic Solar Modules In Vehicles, Mahmoud Abdelhamid

All Dissertations

This dissertation presents a novel comprehensive assessment methodology for using on-board photovoltaic (PV) solar technologies in vehicle applications. A well-to-wheels life cycle analysis based on a unique energy, greenhouse gas (GHG) emission, and economic perspective is carried out in the context of meeting corporate average fuel economy (CAFE) standards through 2025 along with providing an alternative energy path for the purpose of sustainable transportation. The study includes 14 different vehicles, 3 different travel patterns, in 12 U.S. states and 16 nations using 19 different cost analysis scenarios for determining the challenges and benefits of using on-board photovoltaic (PV) solar technologies …

Modeling Sustainability In Renewable Energy Supply Chain Systems, Fei Xie

All Dissertations

This dissertation aims at modeling sustainability of renewable fuel supply chain systems against emerging challenges. In particular, the dissertation focuses on the biofuel supply chain system design, and manages to develop advanced modeling framework and corresponding solution methods in tackling challenges in sustaining biofuel supply chain systems. These challenges include: (1) to integrate 'environmental thinking' into the long-term biofuel supply chain planning; (2) to adopt multimodal transportation to mitigate seasonality in biofuel supply chain operations; (3) to provide strategies in hedging against uncertainty from conversion technology; and (4) to develop methodologies in long-term sequential planning of the biofuel supply chain …

Life Cycle Assessment Projection Of Photovoltaic Cells: A Case Study On Energy Demand Of Quantum Wire Based Photovoltaic Technology Research, Shilpi Mukherjee

Graduate Theses and Dissertations

With increasing clean-energy demand, photovoltaic (PV) technologies have gained attention as potential long-term alternative to fossil fuel energy. However, PV research and manufacture still utilize fossil fuel-powered grid electricity. With continuous enhancement of solar conversion efficiency, it is imperative to assess whether overall life cycle efficiency is also being enhanced. Many new-material PV technologies are still in their research phase, and life cycle analyses of these technologies have not yet been performed. For best results, grid dependency must be minimized for PV research, and this can be accomplished by an analytical instrument called Life Cycle Assessment (LCA).

LCA is the …

Predicting Solar Irradiance Using Time Series Neural Networks, Ahmad Alzahrani, Jonathan W. Kimball, Cihan H. Dagli

Electrical and Computer Engineering Faculty Research & Creative Works

Increasing the accuracy of prediction improves the performance of photovoltaic systems and alleviates the effects of intermittence on the systems stability. A Nonlinear Autoregressive Network with Exogenous Inputs (NARX) approach was applied to the Vichy-Rolla National Airport's photovoltaic station. The proposed model uses several inputs (e.g. time, day of the year, sky cover, pressure, and wind speed) to predict hourly solar irradiance. Data obtained from the National Solar Radiation Database (NSRDB) was used to conduct simulation experiments. These simulations validate the use of the proposed model for short-term predictions. Results show that the NARX neural network notably outperformed the other …

Emergency Diesel-Electric Generator Set Maintenance And Test Periodicity, Stephen John Fehr

Engineering Management & Systems Engineering Theses & Dissertations

Manufacturer and industry recommendations vary considerably for maintenance and tests of emergency diesel-electric generator sets supporting critical operations power systems facilities. There is little consistency among sets of similar technology, and manufacturers and their representatives often provide contradictory guidance. As a result, periodicity of emergency diesel-electric generator set maintenance and tests varies considerably in practice. This work proposes and tests a research and analysis framework to develop parametric regression survival models of modern diesel-electric generator sets in emergency standby duty as a function of maintenance periodicity, test periodicity, and other predictors. Within this framework, predictors are developed from common maintenance …

Improved Accuracy In Real-Time Rfid Localization Systems Using Kalman Filtering, Benjamin J. Sanda

Masters Theses

The use of Radio Frequency Identification (RFID) has become widespread in industry as a means to quickly and wirelessly identify and track packages and equipment. Now there is a commercial interest in using RFID to provide real-time localization. Efforts to use RFID technology for this purpose experience localization errors due to noise and multipath effects inherent to these environments. This paper presents the use of both linear Kalman filters and non-linear Unscented Kalman filters to reduce error effects inherent to real-time RFID localization systems and provide more accurate localization results in indoor environments. A commercial RFID localization system designed for …