Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Decision-Support System For The Deployment Tasking Process Of U.S. Air Force Civil Engineer Officers, Kenneth A. Neal

Theses and Dissertations

The Armed Forces frequently deploy their personnel to expeditionary locations around the world. For example, the Air Force tasks its personnel to deploy based on a six-month rotational cycle. In the current tasking process, the deployment makes its way down from combatant commanders to squadron commanders through the chain of command. The commander then has a few days to select an individual from their unit to fill the tasking. The commander may consider an individuals’ dwell time, home-station position, and upcoming significant life events; however, because commanders have little time and information, minimum requirements selection criteria often become the driving …

Investigating Manufacturer Selection Decisions For Built Infrastructure Assets Using A Technical Performance Metric, Sarah L. Brown

Theses and Dissertations

Facility and built infrastructure asset management are necessary functions of any organization that utilizes buildings to operate their businesses. However, most organizations require facility managers to ensure the successful operation of their assets without providing sufficient resources to accomplish this task. Therefore, in resource-scarce environments, facility managers require data-driven solutions to manage their assets and make the best decisions. Facility managers need novel solutions to help make asset life-cycle decisions. This research provides such a solution. Capitalizing on available data, a technical performance metric is created, allowing facility managers to calculate their assets' operational performance. This performance metric provides a …

Structural Identification And Damage Detection In Bridges Using Wave Method And Uniform Shear Beam Models: A Feasibility Study, Mehran Rahmani, Manan Naik

Mineta Transportation Institute

This report presents a wave method to be used for the structural identification and damage detection of structural components in bridges, e.g., bridge piers. This method has proven to be promising when applied to real structures and large amplitude responses in buildings (e.g., mid-rise and high-rise buildings). This study is the first application of the method to damaged bridge structures. The bridge identification was performed using wave propagation in a simple uniform shear beam model. The method identifies a wave velocity for the structure by fitting an equivalent uniform shear beam model to the impulse response functions of the recorded …

Asset Management Framework For The United States Army Corps Of Engineers Lock And Dam Electrical Equipment, Megan Elizabeth Bates

Theses, Dissertations and Capstones

The focus of this thesis is to design an efficient and effective preventative maintenance program for the electrical equipment that the United States Army Corps of Engineers (USACE) operates at the locks and dams. This thesis presents the concept of asset management and designs a framework to manage the electrical assets at USACE. The methodology was tested, and the results validated the framework proposed in this thesis. The framework was tested on two separate projects and the results were the same optimized strategies, which shows that the framework is robust and can be implemented into each project and can give …

Computational Modeling For Decision-Making Under Climate Change Uncertainty: Reservoir Simulation Game, Julianne Quinn

All ECSTATIC Materials

Almost every decision you make is under uncertainty. Will I need a rain jacket in the afternoon? Will they say yes if I ask them out? Is 1 hour enough time to finish this assignment? Oftentimes, we can use computational modeling to simulate different scenarios of what might happen in the future to inform what decisions are best on average, or what decisions minimize the worst case outcome. For example, you could decide what player to draft for your Fantasy Football team by simulating player performance. In this activity, we will simulate how much water to release from a dam …

The Architecture Design Of Electrical Vehicle Infrastructure Using Viable System Model Approach, Mahdi Boucetta, Niamat Ullah Ibne Hossain, Raed Jaradat, Charles Keating, Siham Tazzit, Morteza Nagahi

Engineering Management & Systems Engineering Faculty Publications

Exponential technological-based growth in industrialization and urbanization, and the ease of mobility that modern motorization offers have significantly transformed social structures and living standards. As a result, electric vehicles (EVs) have gained widespread popularity as a mode of sustainable transport. The increasing demand for of electric vehicles (EVs) has reduced the some of the environmental issues and urban space requirements for parking and road usage. The current body of EV literature is replete with different optimization and empirical approaches pertaining to the design and analysis of the EV ecosystem; however, probing the EV ecosystem from a management perspective has not …

Analytical Assessment Of Project Complexity: A Guide To Managing Projects Through Reduction Of Complexity, Christopher Vanarsdale

Dissertations, Master's Theses and Master's Reports

This research discusses the characteristics that make projects difficult to manage. Project inefficiencies and failures can be attributed to the structure of a system. Developing a measurement for complexity based on the number and nature of interactions in the system can allow project complexity to be reduced while still meeting project objectives. Previous research has identified characteristics or markers of complex systems but does not address how to measure or how to reduce a system’s complexity.

The objective of this dissertation is to develop a metric for complexity that assists project and emergency managers in reducing project complexity either by …

Opportunistic Maintenance Strategy Of A Heave Compensation System For Expected Performance Degradation, Chao Zhang, Yujie Qian, Hongyan Dui, Shaoping Wang, Rentong Chen, Mileta M. Tomovic

Engineering Technology Faculty Publications

In the marine industry, heave compensation systems are applied to marine equipment to compensate for the adverse effects of waves and the hydraulic system is usually used as the power system of heave compensation systems. This article introduces importance theory to the opportunistic maintenance (OM) strategy to provide guidance for the maintenance of heave compensation systems. The working principle of a semi-active heave compensation system and the specific working states of its hydraulic components are also first explained. Opportunistic maintenance is applied to the semi-active heave compensation system. Moreover, the joint integrated importance measure (JIIM) between different components at different …

Investigation Of Anaerobic Digestion Of The Aqueous Phase From Hydrothermal Carbonization Of Mixed Municipal Solid Waste, Kameron J. Adams, Ben Stuart, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

In 2017, the United States Environmental Protection Agency (EPA) reported that Americans generated over 268 million tons of municipal solid waste (MSW). The majority (52%) of this waste ends up in landfills, which are the third largest source of anthropogenic methane emissions. Improvements in terms of waste management and energy production could be solved by integrating MSW processing with hydrothermal carbonization (HTC) and anaerobic digestion (AD) for converting organic carbon of MSW to fuels. The objectives of this study were to (a) investigate HTC experiments at varying temperatures and residence times (b) evaluate aqueous phase and solids properties, and (c) …

Infrastructure Systems Modeling Using Data Visualization And Trend Extraction, Jacob Marshal Hale

Doctoral Dissertations

“Current infrastructure systems modeling literature lacks frameworks that integrate data visualization and trend extraction needed for complex systems decision making and planning. Critical infrastructures such as transportation and energy systems contain interdependencies that cannot be properly characterized without considering data visualization and trend extraction.

This dissertation presents two case analyses to showcase the effectiveness and improvements that can be made using these techniques. Case one examines flood management and mitigation of disruption impacts using geospatial characteristics as part of data visualization. Case two incorporates trend analysis and sustainability assessment into energy portfolio transitions.

Four distinct contributions are made in this …

Improvement Of The Effectiveness Of Greywacke Crushing Process By Applying An Impact Crusher In Quarry For The Production Of Railway Ballast, Krzysztof Kurus, Karolina Jąderko-Skubis

Journal of Sustainable Mining

The production of aggregates in rock mining requires an optimal system of crushers, separators and conveyors. Proper machine selection allows to obtain aggregates with appropriate technical parameters and increase the output of required fractions with a given unit cost. The usage of rock raw materials for the production of railway ballast used in the railway track superstructure is connected with the necessity to meet strictly defined quality requirements.

This paper presents an example of the use of an impact crusher in a selected quarry for the purpose of obtaining the correct parameters of railway ballast and a suitable grain curve. …

The Application Of Fuzzy Analytic Hierarchy Process In Sustainable Project Selection, Rakan Alyamani, Suzanna Long

Engineering Management and Systems Engineering Faculty Research & Creative Works

The project selection process is a crucial step in sustainable development. Effective sustainable development depends on the ability to select the appropriate sustainable project to implement to ensure that the desired goals are met. Some of the most common characteristics or criteria used in evaluating sustainable projects include novelty, uncertainty, skill and experience, technology information transfer, and project cost. Prioritizing these criteria based on relative importance helps project managers and decision makers identify elements that require additional attention, better allocate resources, as well as improve the selection process when evaluating different sustainable project alternatives. The aim of this research is …

United States Department Of Defense (Dod) Real Property Repair, Alterations, Maintenance, And Construction Project Contract Data: 2009–2020, Tyler Stout, Adam Teston, Brent T. Langhals, Justin D. Delorit, Carlton Hendrix, Steven J. Schuldt

Faculty Publications

Nearly one-half of all construction projects exceed planned costs and schedule, globally [1]. Owners and construction managers can analyze historical project performance data to inform cost and schedule overrun risk-reduction strategies. Though, the majority of open-source project datasets are limited by the number of projects, data dimensionality, and location. A significant global customer of the construction industry, the Department of Defense (DoD) maintains a vast database of historical project data that can be used to determine the sources and magnitude of construction schedule and cost overruns for many continental and international locations. The selection of data provided by the authors …

Developing Open Source Software Using Version Control Systems: An Introduction To The Git Language For Documenting Your Computational Research, Jared D. Smith, Jonathan D. Herman

All ECSTATIC Materials

Version control systems track the history of code as it is committed (saved) by any number of developers. Have you made a coding error and cannot debug it? Version control systems allow for resetting code back to when it worked, and show what code has changed since previous commits.

The contents of this lecture provide an introduction to the git version control language, GitHub for cloud hosting open source code repositories, and tutorials that demonstrate common and useful git and GitHub practices. This lecture is intended to be coupled with a discussion on creating reproducible computational research.

The zipped folder …

An Agent-Based Model To Study Competitive Construction Bidding And The Winner's Curse, Amr Elsayegh, Cihan H. Dagli, Islam H. El-Adaway

Engineering Management and Systems Engineering Faculty Research & Creative Works

Reverse auction theory is the basis for competitive construction bidding process. The lowest bid method is utilized for selecting contractors in public projects. The winning contractor having the lowest bid value could be cursed when the submitted bid value results in negative profits. This is caused by many factors such as the contractor's estimation accuracy and markup. This is addressed in this paper by providing a model simulating the construction competitive bidding and the occurrence of the winner's curse. To this end, the authors show the extent to which the winner's curse affects the status of contracting companies. The objectives …

A System Dynamics Approach For Study Of Population Growth And The Residential Housing Market In The Us, Gasser Galal Ali, Islam H. El-Adaway, Cihan H. Dagli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The US Consensus bureau estimated the total construction spending at 1,320,305 Million Dollars, in February 2020, with an increase of 1.1% since last February. The construction market is large, and risky. Prediction of the market behavior, for several years ahead, is needed in order to take strategic investment decision for long and expensive projects. The goal of this research is to study the relationship between population growth and the housing market. To that end, a system dynamics model is developed. System dynamics is a top-down approach that starts with the high-level behavior of a complex system to simulate the behavior …

A System Dynamics Model For Construction Safety Behavior, Mohamad Abdul Nabi, Islam H. El-Adaway, Cihan H. Dagli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Construction Industry has always been reputed by its high incident rates and poor safety performance. Construction accidents are, in most cases, resulted from the unsafe behaviors of construction workers on site. The study of workers' behavior is crucial in order to understand the causation of unsafe behaviors. Therefore, the objective of this paper is to simulate construction safety behavior in order to predict the number of safety incidents and better understand their causation factors. The simulation model illustrates how construction system influences construction labors on site in terms of unsafe behavior. The standard leading indicators of safety performance are first …

A System-Of-Systems Model To Simulate The Complex Emergent Behavior Of Vehicle Traffic On An Urban Transportation Infrastructure Network, Rayan Assaad, Cihan H. Dagli, Islam H. El-Adaway

Engineering Management and Systems Engineering Faculty Research & Creative Works

Transportation agencies face escalating challenges in forecasting the traffic demand. Traditional prediction methods focused on individual transportation sectors and failed to study the inter-dependencies between the different transportation systems. Hence, there is a need for more advanced and holistic modeling techniques. To this end, this paper models and analyses an urban transportation system-of-systems incorporating seven various systems: population and GDP, CO₂ emission, gasoline price and total vehicle trips, traffic demand, public and private transportation, transportation investment, and traffic congestion. Accordingly, this research simulates transportation networks as a collection of task-oriented systems that combine their resources to form a complex …

Hybrid Vehicle-Drone Routing Problem For Pick-Up And Delivery Services Mathematical Formulation And Solution Methodology, Aline Karak

Civil and Environmental Engineering Theses and Dissertations

The fast growth of online retail and associated increasing demand for same-day delivery have pushed online retail and delivery companies to develop new paradigms to provide faster, cheaper, and greener delivery services. Considering drones’ recent technological advancements over the past decade, they are increasingly ready to replace conventional truck-based delivery services, especially for the last mile of the trip. Drones have significantly improved in terms of their travel ranges, load-carrying capacity, positioning accuracy, durability, and battery charging rates. Substituting delivery vehicles with drones could result in $50M of annual cost savings for major U.S. service providers.

The first objective of …

Parklets San Luis, Owen Kenny, Preston Jag Stebel, Leonidas Goodman, Lukas Braun

Industrial and Manufacturing Engineering

Downtown San Luis Obispo has been a popular destination for tourists, students, families, and roadtrippers. However, according to Ryan Betz, Interim Assistant to the City Manager, foot traffic and retail business revenue has been decreasing. Downtown SLO does not have enough free public spaces. Recent projects such as sidewalk bump outs and lighted crosswalks have aimed at making SLO more pedestrian accessible, but they have not actually made downtown more pleasurable. These projects have not seemed to drive any more business or traffic downtown. There are a myriad of ways to rectify this; studies show that having a free place …

Understanding Rural Water Services As A Complex System: An Assessment Of Key Factors As Potential Leverage Points For Improved Service Sustainability, Nicholas Valcourt, Jeffrey P. Walters, Amy Javernick-Will, Karl Linden, Betelhem Hailegiorgis

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Rural water supply services worldwide consistently fail to deliver full public health impacts as intended due to a low service sustainability. This failure is increasingly attributed to weak local systems composed of social, financial and environmental factors. Current approaches in the water, sanitation and hygiene (WASH) sector for understanding and improving these systems typically focus on the strength and capacity of these factors, but not the interactions between them. We contend that these approaches overlook the inherent complexity and context-specific nature of each local system. To assess this complexity, we conducted four participatory factor mapping workshops with local stakeholders across …

Thermophotovoltaic Systems For Achieving High-Solar-Fraction Hybrid Solar-Biomass Power Generation, Cm Iftekhar Hussain, Aidan Duffy, Brian Norton

Articles

Medium operating temperature hybrid solar-biomass TPV power plant design requires complex integration of multiple high temperature processes with low band-gap TPV cells. A 0.72 eV band-gap GaSb TPV cell has been used in thermophotovoltaic (TPV) systems operating at temperatures above 1400 °C. Low band-gap TPV cells, such as InGaAs (Eg = 0.55 eV) and InAs (Eg = 0.36 eV) could enable a TPV system to operate optimally at temperatures ≈1000 °C. To examine this, two hybrid solar-biomass TPV system configurations are studied using TRNSYS simulation that incorporates a new algorithm for TPV. It is found that in a high solar …

Degrader Analysis For Diagnostic And Predictive Capabilities: A Demonstration Of Progress In Dod Cbm+ Initiatives, William Baker, Steven Nixon, Jeffrey Banks, Karl Reichard, Kaitlynn Castelle

Engineering Management & Systems Engineering Faculty Publications

This paper presents a modified reliability centered maintenance (RCM) methodology developed by The Applied Research Laboratory at The Pennsylvania State University (ARL Penn State) to meet challenges in decreasing life cycle sustainment costs for critical Naval assets. The focus of this paper is on the requirements for the development of the on-board Prognostics and Health Management (PHM) system with a discussion on the implementation progress for two systems: the high pressure air compressor (HPAC), and the advanced carbon dioxide removal unit (ACRU). Recent Department of Defense (DoD) guidance calls for implementing Condition Based Maintenance (CBM) as an alternative to traditional …

Internet Of Things For Sustainable Mining, Abdul Salam

Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

Transit Agencies Performance Assessment And Implications, Parisa Hajibabaee

Graduate Theses, Dissertations, and Problem Reports (ETD)

Although most transit systems operate in small urban and rural areas in the United States, these systems have rarely received the same attention as their urban counterparts, both in terms of ensuring the efficiency and effectiveness of their operations and understanding the factors that affect their performance. This thesis's main goals are to assess the performance of rural and small urban public transit agencies and help them evaluate adopting a ridehailing program, thereby improving their performance. We applied operations research and decision-making tools to two public transit projects in small urban and rural areas. The first project focuses on three …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Reviewing The Potential And Constraints Of Modified Technology Options For Faecal Sludge Management In Dar Es Salaam, Tanzania, Amour Seleman

Tanzania Journal of Engineering and Technology (TJET)

Cities in the developing world face the challenge of safe management of faecal sludge because of rapid population growth that overwhelms the sanitation infrastructure and services. In developing countries, only 50% of faecal sludge (FS) generated is safely managed the remaining portion is haphazardly disposed of in the environment risking public health and environment. In response to the urgent need for safely managed sanitation services, technological options for containment, desludging and transportation of FS are being modified. This paper reviewed current desludging practices and the potential of modified technological options for addressing FSM at containment, desludging, and transportation in Dar …

A Case Study: The First Coastal Nuclear Decommissioning Project In California, Willie Aaron Quiros

Construction Management

San Onofre Nuclear Generating System (SONGS) is one of two nuclear power plants in California. Since the shut down in 2012, there is only one actively remaining, Diablo Canyon Nuclear Power Plant, which is set to shut down in 2024. This paper will examine the decommissioning of SONGS thus far; the first coastal nuclear decommissioning project in California’s stringent permitting process. This project was awarded as a joint venture to AECOM and Energy Solutions, both having experiencing in the field of nuclear decommissioning. This paper will outline what nuclear decommissioning challenges have been in the past; general steps of decommissioning …

Generalized Relay Network Design And Collaborative Dispatching In Truckload Transportation, Amin Ziaeifar

Operations Research and Engineering Management Theses and Dissertations

The truckload industry faces a serious problem of high driver shortage and turnover rate which is typically around 100\%. Among the major causes of this problem are extended on-the-road times where drivers handle several truckload pickup and deliveries successively; non-regular schedules and get-home rates; and low utilization of drivers dedicated time. These are by-and-large consequences of the driver-to-load dispatching method, which is based on point-to-point dispatching or direct shipment from origin-to-destination, commonly employed in the industry. In this dissertation, we consider an alternative dispatching method that necessitates careful design of an underlying network. In this scheme, a truckload on its …

Minimodal: Dimensional Domain Of Miniature Shipping Containers For Intermodal Freight Transportation, Lee Stapley

Ursidae: The Undergraduate Research Journal at the University of Northern Colorado

This study explores the feasibility of miniature shipping container usage within existing intermodal transportation (IT) supply chains. Smaller intermodal container shipments may help realign freight shipments with the most efficient transportation mode, rail. These containers embolden the dimensional domain (DD) of shipping. The shipping container dimensional domain (container size variation and modal fluidity) is widespread and results in shipments that are often larger or more infrequent than needed. The DD impacts transport mode, shipping frequency, shipment velocity, intermodal supply chain accessibility, and regional shipping networks. This study suggests that container size impacts the DD and, therefore, mode choice. As miniature …