Operations Research, Systems Engineering and Industrial Engineering Commons^™

Study Of The Rheological Properties Of The Suspension Formed During The Production Of Caustic Soda By The Lime Method, Aktam Ulashovich Erkaev, Dildora Tursunova

Chemical Technology, Control and Management

The process of obtaining sodium hydroxide - caustic soda by conversion of soda ash with lime milk in the presence of natural mirabilite - has been investigated. The influence of temperature, Na₂CO₃: Na₂SO₄ ratio, concentration of lime milk and duration of the conversion process on this process was studied by identifying their optimal values. The study of the rheological properties of the reaction pulp showed that it is mobile and well filtered, which makes it possible to obtain rapidly settling large crystals of Na₂CO₃·2Na₂SO₄, Na …

Methodology For Determination And Assessment Of Uncertainty Sources Of Textile Materials Total Thermal Resistance, Abdurauf Abdurashidovich Abdukayumov, Ortagoli Sharipovich Hakimov

Chemical Technology, Control and Management

The problems of improving of methods for determination of the total thermal resistance of textile materials are considered. A comparative analysis of the applied methods based on stationary and non-stationary heat exchange is performed. A higher accuracy of non-stationary methods based on measuring the cooling time of a heat cell with subsequent determination of the cooling rate and the total thermal resistance of the material under study is noted. A method is proposed for estimating the variance of the main values required for calculating the total thermal resistance of materials. The results of the study of the relationship between sources …

Analysis Of Consistency Of Similarity Predicates To Measures Of Similarity And Advantages Of Their Application In Digital Systems For Solving Intellectual Problems, Makhmudjon Abdullaev, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The results of the analysis of the correspondence of similarity predicates to similarity measures used in various metric methods used for signal classification and the feasibility of using similarity predicates in the construction of digital systems for solving intellectual problems, for which the simplification of computational operations is of no small importance, are presented. Some general and distinctive features of the similarity predicate are considered in comparison with the euclidean metric in relation to one-dimensional and two-dimensional spaces, and generalized to the case of n-dimensional metric spaces. The expediency of using methods based on the calculation of similarity predicates, which …

Synthesis Of Control Systems For Multidimensional Dynamic Objects Under Parametric Uncertainty Based On The Invariance Theory, U.F Mamirov

Chemical Technology, Control and Management

The problems of synthesis of control systems for multidimensional dynamic objects in the conditions of parametric uncertainty which are based on invariance theory are considered. When constructing stable synthesis algorithms, a recurrent method for determining pseudo-solutions of linear algebraic systems of equations is used. Computational algorithms for the solution based on singular matrix expansions are given. These computational procedures allow us to regularize the problem of synthesis of the considered algorithms for the synthesis of control systems for multidimensional dynamic objects under conditions of parametric uncertainty and improve the quality indicators of control processes.

Development Of A New Technology For Obtaining The Substance Of The Drug Acetamizole, Sarvar Saidov, Asqar Abdurazakov, Rixsibay Karimov, Mavluda Baltabayeva

Chemical Technology, Control and Management

The main goal of this work is to obtain a preparation of acetamizole based on local raw materials by a more convenient method of acylation of 2-methoxycarbonylaminobenzimidazole with glacial acetic acid, this synthesis method is proposed for the first time. On the basis of the conducted experiments, favorable conditions for the reaction were found, the influence of the nature of the acid, the temperature, the duration of the reaction and other factors on the course of the reaction was studied, the technology was developed and implemented at the experimental production of "IHRV AN RUz". Based on experiments conducted by scientists …

Assessment Of Heavy Metal Concentration In Soils Around Geita The Gold Mine, Tanzania, Mariam G. Mgendi, Mkabwa L. K Manoko, W.J.S. Mwegoha, C. Southway C. Southway

Journal of Humanities and Social Sciences

Health issues related to gold mining cannot be underestimated. Gold mining produce acid mine drainage (AMD), which in turn releases heavy metals into the nearby environment, hence causing environmental pollution. Heavy metals are naturally very toxic, thus pose a great health concern especially when their concentration exceeds the recommended permissible limits. In this study, concentrations of five heavy metals—including Pb, Ni, Cr, Cu and Zn—were assessed in the soil around Geita Gold Mine (GGM). A total of 17 sampling sites were established from which the soil samples were collected at 0-15cm and 15-30cm soil depth. The concentration of both total …

Helicopter Shaft Heating Parameters For Polyamide-11 Coating, Selim Kevran Ph.D, Uğur Ati̇ci̇

International Journal of Aviation, Aeronautics, and Aerospace

In this study, the heating parameters required for polyamide-11 (P11) coating of the helicopter shaft were investigated. The torsion value created by the force applied to the middle of the helicopter's shaft is measured. Heating before coating affects the torsion value of the shaft. A new heating mechanism has been designed to cover the shaft surface without changing the torsion value of the shaft. Thus, the coating surface is left inside the furnace and the torsion measurement area outside of the furnace. Taguchi method was used to determine heating parameters such as furnace type, initial temperature and heating time. The …

Modeling, Optimization And Uncertainty Quantification Of Solids-Based Co2 Capture Technologies, Anca Ostace

Graduate Theses, Dissertations, and Problem Reports (ETD)

Solids-based carbon dioxide (CO₂)adsorption, where CO₂ is adsorbed under high pressure/low temperature and desorbed at low pressure/high temperature, is a low energy consumption capture technology with high carbon uptake efficiency. Chemical looping combustion (CLC), where a solid oxygen carrier (OC) transports oxygen between two high-temperature reactors – a fuel and an air reactor –, is a low energy penalty, fuel-flexible technology with inherent CO₂ capture for power/heat and syngas production.

In this work, state-of-the-art equation-oriented (EO) mathematical models of a fixed-bed (FxB) contactor for CO₂ adsorption and moving-bed (MB) reactors for gas-, and solid-fueled CLC …

Parametric Study Of Residual Stresses In Wire And Arc Additive Manufactured Parts, Hisham Khaled Jamil Abusalma

Mechanical & Aerospace Engineering Theses & Dissertations

Wire and Arc Additive Manufacturing (WAAM) is a cost-effective additive manufacturing process due to its capability to fabricate large metal parts with high deposition rate and low equipment cost. Although this method is gaining popularity in manufacturing industry, more research is needed to understand process parameters’ effects on residual stress (RS) distribution and part distortion. As such, a 3D thermo-elastic-plastic transient model was established in ABAQUS and employed to investigate the effect of process parameters such as the torch speed, the deposition power and the interlayer dwell time on RS distribution and distortion in WAAM part. The numerical model utilized …

Conceptual Basis For Modeling Multi-Cordinate Mechatronic Robot Modules, Yusupbekov Azizbek Nodirbekovich, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rustamovich, Temurbek Omonboyevich Rakhimov

Chemical Technology, Control and Management

The conceptual foundations of modeling multi-coordinate mechatronic modules of robots are considered. The use of a multi-coordinate mechatronic movement module in robots made it possible to obtain at the output of one module several linear and angular coordinates, which reduces the weight and dimensions of the robot and thereby improves its dynamic characteristics. The proposed original concept of the mathematical description of a multi-coordinate mechatronic module, which is focused on displaying their structural and operating features. A structural diagram of a developed industrial robot operating in a Cartesian coordinate system and built on the basis of a multi-coordinate mechatronic module …

Identification Of Transition Matrix Of Controlled Objects Under Parametric Uncertainty Condition, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

The questions of formation and construction of algorithms for identification of elements of the transition matrix of controlled objects in conditions of parametric uncertainty are considered. To identify elements of the transition matrix, we suggest using a custom model based on the type of Kalman filtration equations. Algorithms for stable calculation of a pseudo-inverse matrix using matrix decomposition are analyzed. Regular algorithms for solving argumentative problems of minimization of the identification quality criterion are given. These algorithms allow us to regularize the problem of adaptive identification of the transition matrix of an object based on regular methods for minimizing functionals …

Detection Method For “Denial Of Service” Attacks On Web Applications, Azizbek Ravshonbek Ugli Ibrohimov

Chemical Technology, Control and Management

A method for detecting denial-of-service attacks on web applications based on the use of a multi-layer perceptron is considered. The main issues related to the use of the neural network are described: the process of collecting and preparing statistical data, the features of forming indicators that characterize the state of the web application, as well as the issues of training and evaluating the quality of the neural network.

Structural – Parametric Analysis And Synthesis Of Glass Furnace Condition Observer, Utkir Uktam O‘G‘Li Kholmanov

Chemical Technology, Control and Management

A modified Kalman filter of the glass cooking process is synthesized, taking into account perturbations in the form of a sequence of colored noises. The possibility of expanding this filter by noise filters to improve functioning in the presence of low-frequency disturbances is studied and a corresponding estimation scheme with additional noise filters is proposed. The results of the simulation allow us to assume that low-frequency disturbances in the glass furnace act at the input and affect the state of the control object.

Ecg Processing And Analysis Technique Based On Neural Network Learning Vector Quantization, Talat Madievich Magrupov, Sherzod Kalandarovich Nеmatov, Yokubjon Talatovich Talatov

Chemical Technology, Control and Management

The main parameters of the electrocardiogram (ECG) were processed on the basis of the neural network apparatus. A decision support algorithm for ECG analysis using a neural network for learning vector quantization is proposed. For the study was chosen such features as the duration of QRS complex, RR interval, amplitude of R-wave and the change in the slope of ST segment and heart rate, which are five inputs to the neural network learning vector quantization. Methods of pre-processing and analysis of extraction of ECG functions based on the ECG database of a medical institution in Matlab are presented. The generalized …

Optimal Ratio Of Primary And Secondary Clarifier Characteristics In Wastewater Treatment Plants, Makhsud Idrisovich Makhmudov, Zafarbek Esanovich Kuziev, Siroj Sobirovich Nurov, Sanjar Siroj Ugli Sidikov

Chemical Technology, Control and Management

The issues of optimization of aerobic biological wastewater treatment processes are considered. Optimal ratios of characteristics and sizes of primary and secondary sedimentation tanks, as well as their relationship with the concentration of activated sludge by volume, are revealed. Graphical representations of the dependence of the volumes of primary, secondary and total volumes of structures on the concentration of activated sludge in cleaning processes with low and high loads are obtained. Experimental studies have shown that the concentration of activated sludge in the aeration tank and the silt index directly affect the deposition characteristics of activated sludge, in particular the …

Static Characteristics Of Thermal Humidity Converters Of Liquid Materials In Continuous Flow, N.I. Avezova, P.R. Ismatullaev, Paraxat Matyakubova

Chemical Technology, Control and Management

Thermal systems with distributed heat sources based on a pipeline segment with radial holes are proposed for the development of designs of thermal humidity converters for liquid materials. Across the liquid flow there are tubular arguments with cylindrical heat-sensitive elements, on the surface of which the heating element winding was wound, which significantly increased their sensitivity, speed, reliability and allowed the use of standard semiconductor heat-sensitive elements.

A Study Of Static And Dynamic Characteristics Of Multifunctional Signal Converters, Akmal Abdumalikov

Chemical Technology, Control and Management

The issues of continuity, accuracy, speed and reliability of signal conversion, which are the main problems of quality control and management of production processes, remain relevant. Research shows that in practice there are different signal variables, the study of which is highly formalized in a number of modeling tasks and basic classification studies, in particular transients in converters, its sources and elements requires a unified mathematical approach, that is, visual, highly formalized modeling and research based on it. The paper presents a graph model of multifunctional signal converters that provide microprocessor and electronic devices with signals in the form of …

A Study Of Security Problems In Big Data And Their Solutions, Nozima Akhmedova

Chemical Technology, Control and Management

Statistical data on information security that concerns Big Data and is the most important for enterprises are provided. Based on this data, we studied problems such as the lack of big data practices and protection, the lack of techniques for protecting big data, the lack of standards for protecting big data, the lack of regulation of big data and ecosystems, security problems in Big Data, and proposed several proposals to improve the security of systems that use this technology.

Capacity Transformer Of Coaxial And Cylindrical Form Of Humidity Meter, Erkin Uljaev, Utkirjon Murodillaevich Ubaydullaev, Shohrux Nurali O'G'Li Narzullaev

Chemical Technology, Control and Management

The question of development and calculation of construction of a coaxial and cylindrical form of the capacity transformer of a humidity meter is considered. As basic data, the sizes and the materials ditches allowing to measure the humidity of different volumes of bulks from 5 to 50 gr are selected. As materials of a ditch, plastic are selected, and as tanks, the magnetizing materials are selected. It is briefly cited the advantages and disadvantages of ways to measure humidity and the basic dielectric characteristics of capacitive converters. The electrical replacement scheme of the proposed capacitive converter was provided and the …

Reliable Risk Assessment Method For Effective Organization Of Information Security At Enterprise, Fayzullajon Bakhtiyorovich Botirov

Chemical Technology, Control and Management

The problems of the new industry 4.0 automation paradigm are considered and the latest technologies in the field of information and communication technologies that stimulate it are analyzed, including cyber-physical systems, cloud computing, the Internet of things and big data. Some methods of multidimensional, multi-faceted industrial representation and analysis of big data are proposed. The basics of big data processing using granular computing methods have been developed. Marked the emergence of the problem of creation of special cognitive tool for constructing artificial agents, understanding integrated intelligence enterprises. In the process of information protection at the enterprise, it is proposed to …

Analysis Of Information Security System Standards And Key Aspects Of Security Control, Abduhalil Abdujalilovich Ganiyev

Chemical Technology, Control and Management

The standards of the information security management system (IMS) are considered and the main aspects of information security management are studied, in particular the international standard ISO/IEC 27001, the Process approach to the management of IS, the stages of development of the information security management system. The measures taken for the organization of information security management systems are defined. Organizational measures include the implementation of information security management systems in the organization.

Study Of Rheological Properties Of Solutions And Pulp During Dicalcium Phosphate Formation Process, Navruzbek Ibraimovich Khurramov, Tulkin Isamurodovich Nurmurodov, Nilufar Negboevna Bozorova, Zarifa Umarovna Karimova

Chemical Technology, Control and Management

This article presents the rheological properties of suspensions obtained on the basis of nitric acid decomposition of unfired phosphorites of the Central Kyzylkum, as well as the chemical compositions of dicalcium phosphate and solid residues after the filtration process. The mass-spectral analysis of the pure dicalcium phosphate salt obtained by ammonization of the liquid part separated from the solid residue and subjected to filtration was studied.

Developing Highly Efficient Industrial Contact Heat Exchanger, Khoshim Shayimovich Bakhronov, Abdumalik Abduvahobovich Akhmatov, Yorkin Bakhodirovich Kadirov

Chemical Technology, Control and Management

The paper presents the results of an experimental study of the intensification of heat transfer of a swirling flow in a cylindrical channel with two tangential and axial swirlers. During the experiments, such parameters were measured as: air flow in front of the vortex apparatus; hot water consumption; pressure drop in the vortex apparatus; temperature of working media at the inlet to the apparatus and at the outlet of it. A method for intensifying the heat transfer process, which is based on swirling a gas stream by its tangential supply, has been developed and investigated. Experimental studies of the intensity …

Image Processing Of Technological Objects, Lyudmila Petrovna Varlamova

Chemical Technology, Control and Management

The article considers the problem of creating a smoke detection and fire detection system for technological objects. Fire detection is carried out using a vision system. Monitoring of technological objects is carried out using an unmanned aerial vehicle. For further actions, processing and classification of images is necessary. When observing the technological apparatuses of the chemical and petrochemical industry, problems arise associated with the large size, distribution and extent of objects. There may be situations in which there are violations of the technological regulations and, as a result, the occurrence of fire, fire and smoke. Using the technology of unmanned …

Analysis Of Information Security Methods In Biosystems And Application Of Intelligent Tools In Information Security Systems, Sherzod Sayfullaev

Chemical Technology, Control and Management

In this paper, the methods of information protection in bio systems are studied. The paper considers the use of intelligent tools in information security systems and the use of adaptive information security systems. Several articles on the field of information protection in bio systems are analyzed. Disadvantages and advantages of neural network technologies in modern information security systems are described. The characteristics of bio systems and the specificity of DNA, the main features of the DNA code that provide information security and functional stability of bio systems data protection structure. Application of intelligent tools to create a comprehensive adaptive protection …

Electronic Spam Filtering Based On Neural Networks, Tulkun Fayzievich Bekmuratov, Fayzullajon Bakhtiyorovich Botirov, Elshod Dilshod Ugli Haydarov

Chemical Technology, Control and Management

This article analyzes the problem of filtering spam messages and addressing spam messages, Bayesian theorems based on artificial intelligence, LVQ algorithms (LVQ learning vector quantization) and a filtering scheme for systems based on neural networks. The direct construction of an effective neural network model of spam filtering using database recognition technology is considered. The parameters of access to the neural network how to include predefined statistical and non-statistical attributes of messages are given. The structure of neural network technology for classifying emails is also considered. The procedure for analyzing incoming data using the tool included in the analytical platform Deductor …

Improving The Electrochemical Method Of Wastewater Treatment, Dilrabo Akramovna Muhammadieva, Diyor Asadullaevich Hadjibaev, Furkat Ilyasovich Erkabaev

Chemical Technology, Control and Management

With an electrochemical method of wastewater treatment, the preliminary isolation of iron, calcium and magnesium compounds from them contributes to a more intensive recovery process. The purpose of this work is to improve the efficiency of electrochemical treatment of industrial wastewater contaminated with chromium(III) and chromium(VI) ions. The research has determined the optimal conditions for increasing the yield of chromium in the Park during electrochemical treatment of chromate-containing wastewater by using modified bentonite for pre - treatment of wastewater. Pre-softening of wastewater with modified bentonite before electrochemical treatment made it possible to increase the current yield of chromium from 17% …

New Methods For Obtaining Quality Drinking Water In A Water Treatment Plant, Djaloliddin Nosirovich Muxiddinov, Nilufar Abdusomi Qizi Yunusova, Islom Abdisalim Ugli Daynovov

Chemical Technology, Control and Management

The article discusses modern methods, the scientific justification and the study of effective technologies in water treatment schemes for the removal of pollution of natural and man-made origin to produce high-quality drinking water. And also the proposed water treatment plant has a high resource and the ability to effectively purify water from a large number of contaminants and can be used to purify and provide high-quality drinking water to small settlements and industrial facilities located away from transport highways, as well as residential facilities of social institutions, enterprises Catering.

Procedure Formalization For Constructing An Adaptive Control System With A Reference Model Based On The Lyapunov Function, Tulkin Vafoqulovich Botirov

Chemical Technology, Control and Management

Discusses the formalization of the procedure for constructing an adaptive control system with a reference model based on the Lyapunov function. It is shown that the asymptotic stability of the extended system of differential equations guarantees accurate tracking of the desired output signal of the model. At the same time, the expediency of analyzing the asymptotic stability of the system in extended space using the Lyapunov function is shown. The above algorithms help to stabilize the computational matrix inversion procedure and thereby increase the accuracy of estimating the adjustable parameter in an adaptive control system.

Distributed Information Space As An Associative Environment Of Communication Setting, Yusupbekov Rustambekovich Nodirbek, Shukhrat Manapovich Gulyamov, Nargiza Baxtiyorbekovna Usmanova, Malika Yuldashovna Doshchanova

Chemical Technology, Control and Management

Modeling the structure of a distributed network can be based on the architecture of an associative infocommunication network, which displays the processes and mechanisms of interaction of components in the corresponding nodes of the structure. It is shown that for the description and functional representation of a distributed network, it is appropriate to apply decomposition for the field of software engineering, the purpose of which is to create theories that interact with each other according to well-defined rules. A conceptual representation of the distributed space behavior model is given. The paper discusses the modeling of the evolutionary search.