Operations Research, Systems Engineering and Industrial Engineering Commons^™

Modeling And Adjustment Of A Fuzzy Controller In A Bioreactor Control System, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article describes the modeling and configuration of a fuzzy controller for the control system of the bacterial oxidation of hard-to-enrich gold-bearing sulfide ores. The simulated logical fuzzy controller allows you to save the consumption of refrigerant water consumed in the process by 4,3%, using it to control the process of bacterial oxidation.

Synchronization Of The Training Of Specialists In The Automation Of Technological Processes In Accordance With The Dynamics Of The Taxonomy Of Learning Goals, Yusuf Shodievich Avazov, Kamola Abdullaeva

Chemical Technology, Control and Management

Changes in the characteristics of modern ones, reflecting them as the "digital generation", inevitably necessitate electronic interactive, mobile and mixed, machine learning, especially in the field of automation and control of technological processes and production. As a consequence of reflecting these realities, there have been parallel changes in the taxonomy of learning objectives - from the classical to the revised rethought and digital.

In order to study the problem of synchronizing the training of future specialists in the field of automation and control of technological processes and production and funny knowledge in accordance with the dynamics of the taxonomy of …

Algorithmic Methods For Developing The Structure Of A Thyristor Electric Drive For Mining Machines, N.R Yusupbekov, O.A. Jumaev, S.S. Turaev

Chemical Technology, Control and Management

The article discusses the creation of algorithmic structures and the development of digital control systems for electric drives of mine-lifting machines, provides some concepts for creating digital control systems using thyristor converters. The analysis of the static volt-ampere characteristics of the thyristor is given, some calculations of the circuits and circuits of the thyristor converter (TP) corresponding to the different modes of operation of the TP are given, and also, based on the synthesis of the dynamic properties and characteristics of the thyristor, an algorithmic structure of the model of the thyristor converter is proposed.

Research Of Three-Phases Current’S Transducers Of Filter-Compensation Devices For Control Reactive Power’S Consumption Of Asynchronous Motor, Ilkhomjon Khakimovich Siddikov, Dilyorbek Karimjonov Doniyorbek O'G'Li -, Abdumutal Abdikarimovich Abdigapirov

Chemical Technology, Control and Management

In the article given materials of developing of three-phase electromagnetic current transducers of reactive power, using with asynchronous motor, methods connecting of two sensing element, series, parallel and differential and loops suitable for each phase, dynamic characteristics of output signals of three-phase electromagnetic current transducers asynchronous motor.

On the basis of modern calculation and design complexes are of great importance in the research variable sizes of three-phase current electromagnetic transducers of filter-compensation devices of reactive power of asynchronous motors. Presented mathematical model of research of electrical, electromagnetic and magnetic elements of electromagnetic current transducers in the …

Modeling Of The Process Of Measuring Conversion Of The Flow Of Liquid And Gaseous Media By The Method Of Variable Pressure Drop, Shukhrat Manapovich Gulyamov, Elbek Elmirza O'G'Li Ortiqov

Chemical Technology, Control and Management

On the basis of material and heat balances, taking into account the initial and boundary conditions, a mathematical model of the process of measuring the transformation of liquid and gaseous technological media by the method of variable pressure drop is constructed. The analysis of the results of studying the influence of non-stationary flows of a controlled medium on the uncertainty of the results of measuring the flow rate of liquids and gaseous mixtures with a changing hydrodynamic structure of the flow of a controlled medium is performed. A comparative analysis of the calculated and experimental transient processes in the measuring …

Virtual Potassium Chloride Analyzer In The System Of Advanced Control Of Potash Fertilizer Production Processes, Umidjon Ruziev, Jahongir Sherboyevich Bekqulov

Chemical Technology, Control and Management

It is proposed to include virtual instrumental quality analyzers of potash fertilizers in the composition of the advanced (advanced) management system. The structure of the virtual analyzer is substantiated using mathematical models of the technological process of drying potassium chloride in its composition. Based on the results of fuzzy clustering, the parameters of the modes of the technological process of drying potassium chloride are determined.

Model For Calculating The Static Characteristics Of Hydraulic Systems Of Hydro Technical Buildings, Mirkhalil Ismailov, Dong Zhang, Farkhod Kasimov

Chemical Technology, Control and Management

Hydraulic mechanisms that actuate flat gates, widely used in hydraulic structures, are studied as hydraulic actuators of the system. Their static mathematical models are developed using an integrated methodology with a hydraulic pump, inlet and suction pipes, and internal and external resistance factors. Unlike existing mathematical models, the model developed in this paper allows a detailed description of the characteristics of hydraulic drives due to the fact that pressure losses in the throttle, regulator, and power amplifier, as well as local resistances in hydraulic pipelines, are taken into account.

Towards Lean Manufacturing In Developing Countries: Research Gaps And Directions In Tanzania, Francis D. Sinkamba

Tanzania Journal of Engineering and Technology (TJET)

In the current knowledge-driven economy, many industries across the globe are forced to adopt manufacturing technologies such as lean manufacturing to remain competitive in the globalized world. Despite the increase in lean manufacturing implementations, the adoption rate in Tanzania is very low and estimated to be 8 percent. Likewise, the sustainability of lean manufacturing tools and practices is still questionable, which shows the need to develop lean maturity models. To date, several lean maturity models have been developed but there is ARTICLE INFO Submitted: July 5, 2022 Revised: Sept. 28, 2022 Presented: Oct. 20, 2022 a lack of maturity models …

Current And Future Trends Of Construction Project Performance Models: A Review, Method Mtana

Tanzania Journal of Engineering and Technology (TJET)

The construction industry (CI) has experienced outstanding growth and contributed to economic growth for many countries, with enormous foreign investments that require quality projects. High pressure to reduce the construction cost and time commonly put the industry at risk of lower quality and safety of the construction facilities. Like many other developing countries, Tanzania needs more stringent quality control measures in the construction sector to contribute positively to sustainable growth. This study thus reviews current and future trends in construction industry performance in Tanzania. The literature review on construction projects (CPs) performance is based on information on time overruns from …

Factors Influencing Total Productive Maintenance Implementation For Thermal Generation Plants, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

This study accepts that the technical and administrative factors can amplify effective total productive maintenance (TPM) implementation at thermal generation plants. It is noted that there is a limited number of studies that have attempted to understand the subject of TPM implementation in the energy sector. Noting this shortcoming, the authors thought it crucial to generate empirical evidence on the factors influencing effective TPM implementation for thermal generation plants, with evidence from gas-fired plants. A sample of 88 respondents was selected and consulted. Data were collected through questionnaires and analyzed quantitatively by inferential statistics and qualitatively through thematic analysis using …

Towards The Development Of A Framework For Assessing Organizational Governance Maturity For Technical Audit Of Public Works, George Haule

Tanzania Journal of Engineering and Technology (TJET)

The quality of the audit work and its products is often associated with the organizational maturity of the audit function. The absence of a well-defined organizational maturity for an audit function leads to poor quality of audit work or products and ineffective audit function. The lack of a framework for measuring governance maturity was identified as a major deterrent factor to the attainment of quality audit work. Measuring the governance maturity of the technical audit of public works is challenging due to the absence of a maturity framework that fits its needs. The noted shortcomings include: (a) existing maturity frameworks …

Analysis Of Vegetable Oil Refining Technology, Elyor Samadov

Chemical Technology, Control and Management

Innovative technologies for refining vegetable oils are presented, as well as the qualitative characteristics of raw vegetable oils obtained by extraction and mechanical methods. A general review of the chemical composition and impurities of vegetable oils resulting from the reaction between glycerol and fatty acids is carried out, and a brief review of the study to determine the effect of refining on biologically active components.

The analytical review is devoted to a comparative comparison of two types of refining - chemical and physical refining.

Influence Of Magnetomechanical Properties Of Ferromagnetic Materials On The Sensitivity Of A Magnetoelastic Sensor, Sulton Amirov, Kamila Komilovna Jurayeva

Chemical Technology, Control and Management

The requirements of high operational reliability are most fully met by automated monitoring and control systems, the elements of which are magnetoelastic sensors. Such sensors, due to their metrological characteristics, have found application in electrified railway transport, in the metallurgical, metalworking, mining and other industries. The principle of operation of such sensors is based on the fact that in the process of influencing the magnetic core of the sensor by force, there is a change in the magnetic permeability of the material, a change in the magnetic resistance of the circuit, a change in the mutual inductance coefficient of the …

Algorithms For Multi-Factory Polynomial Modeling Of Technological Processes, Farrukh Do'stmirzayevich Jo'rayev, Murodjon Ashurqulovich Ochilov

Chemical Technology, Control and Management

The article reveals the meaning and essence of the modeling method in the study of complex technological processes based on the problematic aspects of building multifactorial relationships and the principles for their elimination. In the case of non-linearity of multifactorial connections of a complex system, the expediency of approximating such functions by polynomials is substantiated. The authors' ideas about the increasing importance of interpolation methods in practice against the background of the possibility of simplification based on the use of modern mathematical hardware and software for integration into the process of modeling and optimizing technological processes due to the complexity …

Structural Model Of The Technological Process Of Storage And Processing Of Oil Raw Materials, N.A Kabulov

Chemical Technology, Control and Management

The technological method of storing and processing oilseed raw materials is structurally modelled in the article. Additionally, it is suggested that the generalized structure be presented as a three-part scheme, consisting of a raw material department, a processing shop, and transportation networks. On the basis of a thorough examination of the characteristics of the constituent parts of the technological complex, a practical model for the problem of the general characteristics of the technological complex is proposed.

Exploring Current And Future Research Trends On Safety Climate In Construction Projects, Kamugisha Joseph Kajumulo

Tanzania Journal of Engineering and Technology (TJET)

Clients, consultants, and contractors in the construction industry can benefit from a safety climate by obtaining knowledge of attitudes and perceptions for better safety outcomes. However, the current and future research trends for safety climate in construction projects have not yet been fully examined. In order to solve this problem, a systematic review of previous research findings using a social network approach must be conducted, and future trends for the safety climate in building projects must be identified. Sixty-three peer reviewed articles were gathered to study the literature on safety climate in construction projects. A social network approach was employed …

The Fourth Industrial Revolution: Opportunities And Challenges To The Future Of Mechanical Engineering, Ulingeta O.L. Mbamba

Tanzania Journal of Engineering and Technology (TJET)

This paper provides a conceptual overview of the developments of the Fourth Industrial Revolution (4IR) and derives challenges and opportunities for the future of the mechanical engineering profession. The paper broadly defines 4IR as the fusion of technologies and interaction across physical, digital and biological aspects, while defining mechanical engineering as "a multi-faceted discipline that encompasses the teaching, practice and guidance of others in the development and application of scientific principles to mechanical systems". The paper looks specifically at developments in the Internet of Things (IoT), blockchain technology, robotics, Big Data analytics, biotechnology, nanotechnology, 3D printing and artificial intelligence and …

Designing And Manufacturing Of Vegetable Slicing Machine, Juma Nuhu Msuya

Tanzania Journal of Engineering and Technology (TJET)

Agro-processing industry is faced with a challenge of slicing of vegetables for immediate consumption. This stems from the fact that the traditional slicing methods use bare hands, and knives. This method is faced with shortcomings of inefficiency, poor hygiene, and significant dangers to injury. If vegetables are not sliced, their drying takes longer, may possibly be spoiled, and cannot be stored for future uses. Therefore, this paper strives to design a vegetable slicing machine to increase the efficiency of the drying process as a post-processing step. The study employed a Pugh’s design model to design the machine and manufacture it. …

Fugacity-Based Lattice Boltzmann Method For Multicomponent Multiphase Systems, Muzammil Soomro, Luis F. Ayala, Cheng Peng, Orlando M. Ayala

Engineering Technology Faculty Publications

The free-energy model can extend the lattice Boltzmann method to multiphase systems. However, there is a lack of models capable of simulating multicomponent multiphase fluids with partial miscibility. In addition, existing models cannot be generalized to honor thermodynamic information provided by any multicomponent equation of state of choice. In this paper, we introduce a free-energy lattice Boltzmann model where the forcing term is determined by the fugacity of the species, the thermodynamic property that connects species partial pressure to chemical potential calculations. By doing so, we are able to carry out multicomponent multiphase simulations of partially miscible fluids and generalize …

Techno-Economic Analysis And Optimization Of Hydrogen And Mechanical Energy Storage Systems, Pavitra Senthamilselvan Sengalani

Graduate Theses, Dissertations, and Problem Reports (ETD)

The increasing significance of renewable energy sources is thrusting the load cycling of fossil-fueled power plants (FFPP), designed to operate under nominal-load conditions. Integration of energy storage systems (ESS) with the FFPPs such as hydrogen energy storage (HES) and mechanical energy storage facility such as compressed air energy storage (CAES) shows the potential to minimize the levelized cost of electricity during high demand scenarios and also minimize the negative impacts of off-design FFPP operation. The deployment of energy storage facilities at the FFPP level have considerable potential advantages as they can be exploited within the existing equipment items and facilities …

Evaluating Electrification Of Fossil Fuel-Fired Boilers For Decarbonization Using Discrete Event Simulation, Nahian Ismail Chowdhury

Graduate Theses, Dissertations, and Problem Reports (ETD)

Decarbonizing fossil fuel usage is crucial in mitigating the impacts of climate change. CO2, which comprises the major portion of greenhouse gas, is emitted from burning fossil fuels. One of the significant sources of fossil fuel user is industrial process heating, and most of the heating in industrial processes is achieved through boilers. Electrification is a promising solution for decarbonizing these boilers, as it enables renewable energy sources to generate electricity, which can then be used to power the electric boilers. The electrification of boilers can reduce greenhouse gas emissions, improve air quality, and increase energy efficiency. However, it requires …

Dynamic Modeling, Data Reconciliation, Parameter Estimation, And Health Monitoring Of A Supercritical Power Plant, Katherine Grace Hedrick

Graduate Theses, Dissertations, and Problem Reports (ETD)

With the introduction of a larger portion of renewable sources of power coming onto the U.S. power grid in recent decades, the operational strategy of coal-fired power plants has changed significantly to focus more on flexibility in response to the changing energy market. This has naturally led to different operational challenges. Many of these challenges are focused on the boilers within these plants, as they are producing more emissions and experiencing increased damage during load-following, which in turn leads to increased costs from penalties for not achieving emission standards or maintenance costs as boilers accumulate damage from the cycling behavior. …

Model Based Systems Engineering Approaches To Chemicals And Materials Manufacturing, Quang Le

Theses and Dissertations

Model-based systems engineering (MBSE) is part of a long-term trend toward model-centric approaches adopted by many engineering disciplines. This work establishes the need for an MBSE approach by reviewing the importance, complexity, and vulnerability of the U.S. chemical supply chains. The origins, work processes, modeling approaches, and supporting tools of the systems engineering discipline (SE) are discussed, along with the limitations of the current Process Systems Engineering (PSE) framework. The case is made for MBSE as a more generalizable and robust approach. Systems modeling strategies for MBSE are introduced, as well as a novel MBSE method that supports the automation …

Performance Evaluation Of Udsm Network To Deliver Multimedia Elearning Contents: Case Of Coict, Mercy Mbise

Tanzania Journal of Engineering and Technology (TJET)

The use of technology in education in Sub-Saharan Africa has been reported to be hindered by many factors including inadequate Information and Communication Technology (ICT) infrastructure, low internet speed, and lack of skills to use educational technologies. This paper aim at evaluating how the available ICT infrastructure at the College of Information and Communication Technologies (CoICT) can support, with acceptable Quality of Service (QoS), the delivery of multimedia applications for eLearning services. The evaluation was performed over a network testbed implemented in a computer laboratory for wired and wireless connections. The testbed consisted of five personal computers (PCs) connected via …

Development Of Directed Randomization For Discussing A Minimal Security Architecture, Henrique Oyama, Dominic Messina, Keshav Kasturi Rangan, Akkarakaran Francis Leonard, Kip Nieman, Helen Durand, Katie Tyrrell, Katrina Hinzman, Michael Williamson

Chemical Engineering and Materials Science Faculty Research Publications

Strategies for mitigating the impacts of cyberattacks on control systems using a control-oriented perspective have become of greater interest in recent years. Our group has contributed to this trend by developing several methods for detecting cyberattacks on process sensors, actuators, or both sensors and actuators simultaneously using an advanced optimization-based control strategy known as Lyapunov-based economic model predictive control (LEMPC). However, each technique comes with benefits and limitations, both with respect to one another and with respect to traditional information technology and computer science-type approaches to cybersecurity. An important question to ask, therefore, is what the goal should be of …

Performance Comparison Of Several Control Algorithms For Tracking Control Of Pantograph Mechanism, Laylaa Mahmoud Eng, Mohamed Shamseldin Dr, Mohamed Sallam Dr, Abdelghany Mohamed Prof

Future Engineering Journal

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics …

Relative Rate Observer Self-Tuning Of Fuzzy Pid Virtual Inertia Control For An Islanded Microgrid, Ahmed H. Mohamed, Helmy M. El Zoghby, Mohiy Bahgat, A. M. Abdel Ghany

Future Engineering Journal

Expanding the usage of renewable energy in islanded microgrids leads to a reduction in its total inertia. Low inertia microgrids have difficulties in voltage and frequency control. That affected saving its stability and preventing a blackout. To improve low inertia islanded microgrids' dynamic response and save their stability, this paper presented relative rate observer self-tuning fuzzy PID (RROSTF-PID) based on virtual inertia control (VIC) for an islanded microgrid with a high renewable energy sources (RESs) contribution. RROSTF-PID based on VIC's success in showing remarkable improvement in the microgrid's dynamic response and enhancement of its stability. Moreover, it handles different contingency …

Cybersecurity And Dynamic Operation In Practice: Equipment Impacts And Safety Guarantees, Kip Nieman, Dominic Messina, Matthew Wegener, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Though dynamic operation of chemical processes has been extensively explored theoretically in contexts such as economic model predictive control or even considering the potential for cyberattacks on control systems creating non-standard operating policies, important practical questions remain regarding dynamic operation. In this work, we look at two of these with particular relevance to process safety: (1) evaluating dynamic operating policies with respect to process equipment fidelity and (2) evaluating procedures for determining the parameters of an advanced control law that can promote both dynamic operation as well as safety if appropriately designed. Regarding the first topic, we utilize computational fluid …

Contents, Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

No abstract provided.

Preface Of Volume 1 Issue 1 On Journal Of Materials Exploration And Findings (Jmef), Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

No abstract provided.