Operations Research, Systems Engineering and Industrial Engineering Commons^™

An Analysis Of The Effectiveness Of The Air Force Drug Testing Program And Four Potential Modifications, Thomas R. Doster, Hubert A. Ross

Theses and Dissertations

This study evaluated the 1992 USAF Drug Testing Program and potential improvements, based on the number of drug users detected, cost, and legal issues. Four potential improvements were examined: (1) increasing the annual amount of random urinalysis; (2) increasing the proportion of commander-directed testing; (3) using a weighted selection technique, and (4) replacing urinalysis with hair testing. For each improvement, the researchers used test and survey results to estimate the number of drug users detected, a cost formula to estimate any changes in cost, and interviews with legal experts to identify any legal issues associated with implementing the modification. Researchers …

Benchmark Production Scheduling Problems For Job Shops With Interactive Constraints, Stewart W. James, Bruno A. Mediate Jr.

Theses and Dissertations

United States Air Force (USAF) depots have expressed interest in utilizing DISASTER production scheduling software to schedule their maintenance operations. DISASTER attempts to increase system throughput by building effective schedules for system, constraint resources. However, when a system contains multiple, interactive constraints, DISASTER builds the constraint schedules one at a time. Since each successive schedule must adhere to timing restrictions imposed by previous constraint schedules, the quality of the schedules produced by DISASTER is dependent upon the sequence in which the constraints are scheduled. This thesis first developed a set of benchmark problems which provide a diversity of scheduling scenarios. …

Scheduling A Medium-Sized Manufacturing Shop: A Simulation Study, Daniel J. Mcfeely

Theses and Dissertations

This study examined the application of simple-to-use, low cost scheduling methods to the operating environment of a medium-sized manufacturing shop. Computer simulation was used to evaluate eighteen different scheduling algorithms, each the result of the combination of a loading and a sequencing rule; due date setting was not considered since due dates are exogenously set. The loading rules investigated were Minimum Machine Required, Lowest Average WIP, and Lowest Average Aggregate Priority Level. The sequencing rules investigated were Priority, EDD, FIS, SPT, Slack, and Slack Ratio. The scheduling algorithms were evaluated against performance measures of mean tardiness, mean flowtime, mean percentage …

Cross-Cultural Issues In The Management Of German-Owned Business Subsidiaries In Hampton Roads, Teja Ulrich

Engineering Management & Systems Engineering Theses & Dissertations

'Culture' can be described as patterns of thinking, feeling and acting that distinguish one cultural group from another. Cultural diversity is therefore likely to introduce variety to organizations in which individuals from different national backgrounds are working together. Although this variety bears the potential for an improvement of the cognitive development in the organizations, managers of multicultural business organizations tend to perceive cultural diversity as a disadvantage. This thesis attempts to identify the impact of cultural differences between Germans and Americans on organizations in which German managers work with American employees. German managers of eight business subsidiaries in the Hampton …

Cost Constrained Improvements To The Military Retirement System, Cynthia A. Brown

Theses and Dissertations

This research studies possible changes to the current military retirement system. The current military retirement system refers to the system provided under the Military Reform Act of 1986, A new system is proposed which would provide the retiree with four options. Option 1 would provide a pay annuity and medical benefits to the retiree (this is the current system). Option 2 would provide a pay lump sum in place of the, annuity and would offer medical benefits. Option 3 would offer the pay annuity but give a medical lump sum amount in place of the medical benefit. Finally, option 4 …

Predicting The Productive Capacity Of Air Force Aerospace Ground Equipment Personnel Using Aptitude And Experience Measures, Robert S. Faneuff

Theses and Dissertations

This study investigated the effects of mechanical aptitude and job experience on the job performance of 204 Air Force Aerospace Group Equipment (AGE) mechanics. Job performance was expressed as productive capacity (PC), which is derived from estimated performance times on job tasks. PC measures were derived for 50 tasks typically performed by airmen in the specialty. Aptitude measures took the form of Mechanical percentile composite scores on the Armed Services Vocational Aptitude Battery (ASVAB). A second-order logistic model was used to regress PC on aptitude and experience at the task level and at the overall job, or aggregate, level. Model …

An Analysis Of Tactical Airlifter Characteristics And Their Impact On Theater Airlift System Performance, John J. Koger

Theses and Dissertations

This study used computer simulation and Response Surface Technology to determine what tactical airlifter characteristics most impact theater airlift system performance in a Southwest Asia (SWA) scenario. Some Aircraft characteristics were grouped into functional sets, while others were considered individually. After screening one characteristic, reliability, with a two-level factorial experiment, a Box-Behnken design was used to estimate second-order metamodels. A stepwise regression procedure indicated that, if attrition rates are ignored, airlift system performance is most impacted by the aircraft's size, survivability, cruise speed, and ability to operate on short fields. The SWA scenario used in this study covers a large …

Cultural Transposition: Exploring Meanings Of And Strategies For Cross-Cultural Transfer Of Organizational Practices, Yongming Tang

Engineering Management & Systems Engineering Theses & Dissertations

The research objective is to study the phenomenon of transferring organizational practices which are conceptualized in one culture to another different culture. The purpose of the study is (1) to understand how cultural values and beliefs are manifested in behavior; (2) to explore how the Western organizational practices are interpreted and assimilated into an organization in an Eastern culture; and (3) to explore strategies for the fit between local cultural orientations and imported organizational practices. A qualitative, interpretive, and reflexive research methodology was developed to conduct this study.

The study was conducted in two phases. The first phase was designed …

Diffusion Of Total Quality Management: An Organizational Self-Production Perspective, Baizhong Zhao

Engineering Management & Systems Engineering Theses & Dissertations

American industries are in the process of a quality revolution. Most companies are busy implementing Total Quality Management (TQM) programs. However, the experience of both Japanese and American companies indicates that successful TQM implementation depends on an understanding of implementation processes, which itself relies on an understanding of organizational self-organizing, for it is through this process that TQM gets diffused and becomes a core component of an organization's culture. Self-organizing is a so-called process-oriented approach, based on theory from cybernetics (Ashby, 1962; Steier & Smith, 1985; von Foerster, 1960), dissipative structure theory (Prigogine & Stengers, 1984), and chaos theory (Gleick, …

An Investigation Of Performance Appraisal With Recommendations For White Collar And Blue Collar Workers, Mark W. Alberts

Graduate Research Papers

The accurate evaluation of an employee's performance, whether it be a salary or wage worker, is one of the most challenging problems confronting any organization. According to Lazer (1977), which is still true today, performance appraisal is absolutely necessary if an organization is to prosper in the highly competitive world of modern business.

Regardless of all that has been written about the how and why of performance appraisal, there still seems to be constant problems and areas of clear disagreement. Published writings about performance appraisal cover approximately the past 30 years and deal mostly with private corporations. Before that, performance …

Cost/Schedule Control Systems Criteria: A Reference Guide To C/Scsc Information, Erik G. Cummings, Kirk A. Schneider

Theses and Dissertations

This thesis effort provides a valuable tool for contract performance measurement (CPM) analysts to use both while attending formalized Cost/Schedule Control Systems Criteria (C/SCSC) training, and while on the job. Research indicated a large amount of written material existed on contract performance measurement and the more specific topic of C/SCSC, yet this information was hidden in a wide array of unindexed professional journals, master's thesis, and texts. Further, while many professions have a reference guide of annotated bibliographies, CPM had none. Through an extensive literature review using several search and retrieval methods, the authors were able to amass a bibliography …

An Evaluation Of Schedule Metrics Used Within Aeronautical Systems Center, Robert J. Hayes, Lawrence M. Miller

Theses and Dissertations

This study focused on a selected group of schedule metrics in use at Aeronautical Systems Center (ASC) acquisition program offices. Over 300 metrics were collected from the System Program Offices (SPOs). The metrics data were sorted into the categories of cost, schedule, and performance. In order to narrow the scope of the project, the team decided to focus on schedule metrics. Seven of the most common schedule metrics were selected for evaluation by a group of five experienced acquisition professionals. The group was asked to input the likely behaviors driven by the metrics being addressed by the study. Next, they …

The Theory Of Constraints Applied To Project Scheduling: The Critical Chain Concept Defined, Andrew D. Ingram, Paul E. Scherer

Theses and Dissertations

This research applies the Theory of Constraints' principles to a project management environment. The Constraint Theory developed by Dr. Eliyahu M. Goldratt has been successfully applied in many manufacturing settings. Researchers are now beginning to apply Theory of Constraints' principles and techniques outside the manufacturing environment. Specific objectives of this research effort include: to develop and demonstrate a resource constrained project scheduling algorithm based on the Theory of Constraints' principles and techniques: to perform a detailed comparison of the manufacturing and project scheduling environments designed to support algorithm development; and to lay the foundation for additional research in this area …

A Methodology For Project Selection Using Economic Analysis And The Analytic Hierarchy Process, Jeffrey L. Battin, Thomas J. Bender

Theses and Dissertations

This study examined the applicability of a multiple criterion decision making method, known as the Analytic Hierarchy Process (AHP) , to economic analysis decisions involving project selection. Through a survey of the literature and current practices, it was determined that qualitative criteria were not adequately represented in a typical economic analysis of projects. Several MCDM methods were examined and the AHP was found to be the most promising technique to rate projects on a ratio scale. Two types of project selection problems, those involving nonmutually exclusive alternatives and those involving mutually exclusive alternatives, were examined. It was determined that the …

Deterministic Approximations To Co-Production Problems With Service Constraints And Random Yields, Gabriel R. Bitran, Thin Yin Leong

Research Collection School Of Computing and Information Systems

Production planning problems where multiple item categories are produced simultaneously are examined. The items have random yields and are used to satisfy the demands of many products. These products have specification requirements that overlap. An item originally targeted to satisfy the demand of one product may be used to satisfy the demand of other products when it conforms to their specifications. Customers' demand must be satisfied from inventory. The problem is formulated with service constraints and a near-optimal solution is provided to the problem with a fixed planning horizon. Simple heuristics are proposed for the problem solved with a rolling …

Quantifying The Impact Of The Acquisition Professional Development Program Certification Requirements On The Air Force Institute Of Technology, Paul A. Nicholson

Theses and Dissertations

The purpose of this research is to determine the impact of implementing the Acquisition Professional Development Program on the Air Force Institute of Technology. APDP is part of a DOD-wide effort to decrease inefficiency in the procurement process. The program encompasses a tri-level certification process based on experience, training, and educational standards. APDP serves as a guideline for professional development of acquisition personnel from entry to senior level management. Many of the courses required for certification are offered through AFIT School of Systems and Logistics. Integrating the new educational requirements as a standard for career development is expected to produce …

The Relationships Between Technical Operator Turnover Rate And Selected Working Condition Factors In Taiwan's Printing Industry, Ling-Hsiao Lee

Dissertations and Theses @ UNI

The purpose of this study was to determine how technical operator turnover rate related to selected working condition factors in Taiwan's printing industry. These factors, as defined in this study, included wages, employee benefits, alternative work schedules, training programs, and gainsharings. If the results of this study showed that technical operator turnover rate was related to these selected factors, then the findings of this study would be helpful to a manager making decisions on turnover management.

The data for this study were collected by using three sets of questionnaires: (a) one designed for personnel directors, (b) one targeted at financial …

Software Cost Estimating Models: A Calibration, Validation, And Comparison, Gerald L. Ourada

Theses and Dissertations

This study was a calibration, validation and comparison of four software effort estimation models. The four models evaluated were REVIC, SASET, SEER, and COSTMODL. A historical database was obtained from Space Systems Division, in Los Angeles, and used as the input data. Two software environments were selected, one used to calibrate and validate the models outside their environment of calibration. REVIC and COSTMODL are COCOMO derivatives and were calibrated using Dr. Boehm's procedure. SASET and SEER were found to be un-calibratable for this effort. Accuracy of all the models was significantly low; none of the models performed better against the …

Controlling Hazards Associated With Confined Spaces, Srinivas S. Varahabhotla

Theses

Work in Confined Spaces poses special health and safety problems. To avoid the serious consequences which may follow poorly planned or poorly supervised confined space work, a comprehensive program of recognition, evaluation and control of potential dangers must be developed.

The work force should be aware of the extreme dangers associated with confined space and of the procedures and equipment used to overcome these dangers effectively and safely.

The purpose of this thesis is to present the hazardous conditions in a confined space and different means of overcoming these dangers which are not readily apparent. It shows how confined spaces …

The Development Of An Officer Training School Board Score Prediction Method Using A Multi-Board Approach, Sandra C. Niemi

Theses and Dissertations

One phase in the Officer Training School (OTS) selection process is meeting a selection board. Recruiting Services (HQ ATC/RS) currently uses a regression model (based on data from one board) to evenly distribute 'quality' among the different panels in the selection boards. HQ ATC/RS wanted a method of predicting board scores based on data from multiple boards. This study used the results from eighteen boards and 9215 applicants to develop and validate a multi-board regression model for each of five application categories. Comparisons between the two models showed mixed results. In two categories, non- rated operations and technical, the single-board …

Analysis Of The Effects Of The Commander's Battle Positioning On Unit Combat Performance, Thomas I. Pratt

Theses and Dissertations

The purpose of this study was to determine the effect of the Commander's battle positioning on unit combat performance. Research was focused on analyzing the location of the Battalion/Task Force Commander during daytime deliberate attacks conducted at the U.S. Army's National Training Center, Fort Irwin, CA. Forty battles, from January 1986 to September 1989, provided the basis for this study. Information that described the Commander's location, a general description of the battle, and unit measures of effectiveness, was collected for each battle and put in a format that allowed for ease of analysis. This study database was explored using numerous …

Manufacturing Automation Protocol Implementation Guide, Richard H. Infantino

Theses

The purpose of this thesis is to provide a starting point for individuals seeking information on the Manufacturing Automation Protocol (MAP) Specification. This thesis is designed to be as comprehensive as possible, yet, still basic enough to be understood by an individual who may not be familiar with computers and networks, and how they function. The intent is to progress gradually from basic networking concepts and characteristics, to defining network requirements, and finally to network design and installation. At the conclusion of the paper is an Organized Method Approach to MAP network design and installation that could serve as a …

A Case Study In The Development Of A Cost Reduction Methodology In The Public Sector, Ross Cooper Haines

Engineering Management & Systems Engineering Theses & Dissertations

Intense fiscal pressures have caused the Department of Defense (DoD) to explore new ways of reducing operating expenses. The primary technique used to achieve this objective is the use of competition - recently for maintenance requirements not previously subjected to competition. One such maintenance requirement is the periodic overhaul of one of the Navy's front line fighter aircraft - the F-14A Tomcat. This case study documents the cost reduction methodology developed by the DoD's incumbent overhaul facility in preparation for competition. The methodology discusses task time estimation, cost center structure, labor rate development and analysis, internal cost transfers as well …

Development And Validation Of A Model For Training Maintenance Supervisors For Productivity Improvements In Manufacturing Operations, Robert Reed Johnson

Dissertations and Theses @ UNI

The problem of this study was to develop and validate a training model for training maintenance supervisors. This training model focused on those areas, defined by industrial managers, where additional supervisory training was most likely to improve the performance of the maintenance departments.

Research of industrial and maintenance publications identified the maintenance function as having one of the lowest productivity levels in manufacturing organizations. Supervisor training was identified as a means to improve productivity in maintenance departments. An industrial survey completed by maintenance managers in manufacturing organizations in Iowa, Illinois, Minnesota, and Wisconsin identified those activities that were the responsibility …

A Sugar Movement Planning System For Kerala State Civil Supplies Corporation, Nirmala Hindupur

IIMB Management Review

Public distribution of essential commodities is a vital sector of the Indian
economy. This sector, with its diverse activities, has tremendous scope for
efficiency improvement and cost control through the implementation of
Computer-Aided Management (CAM) Systems. Because of its vital importance,
this area is one of the thrust areas selected by CAM Centre, ASCI, Hyderabad
for the development of CAM systems.
The Kerala State Civil Supplies Corporation Ltd. (KSCSC) is one of the
organizations identified for the development of CAM systems.
This paper describes the Sugar Movement Planning System designed
and developed under the GAM project by the author at …

Management Of Construction Jobsite Productivity : A Self Assessment Approach, Nicos Poliviou Nicolaou

Theses

A critical component of construction project management is the improvement of jobsite productivity. This paper proposes a procedure for use by project managers to assess jobsite productivity performance. The methodology provides a framework which when applied will identify specific aspects of the jobsite where potential productivity improvement is possible. A major feature is its systematic approach which will direct the project manager to the specific resources which when better managed will lead to lower construction costs.

Simulation And Off-Line Programming Of Robotic Workcells, Krishnaprasad V. Kamisetty

Theses

A typical, complex robotic workcell, namely NJIT's Flexible Manufacturing System (FMS) cell has been designed, modelled and simulated to bridge the gap between design and its implementation. McDonnell Douglas' (McAuto) PLACE, BUILD, COMMAND and ADJUST have been used to simulate entire cycle of the NJIT's FMS cell. Various aspects such as "Cycle Time Analysis", robot reachability of various positions in the cell and "Collision Detection" have also been studied and analyzed.

The ease of effecting any modifications to the existing workcell design has been demonstrated. The NJIT's FMS cell consists of the GE P-50 robot, the IBM 7535 robot, the …

Feasibiltiy, Planning, And Justification Of Fms : A Case Study, Joo Hwan Kim

Theses

FMS production technology, because of its ability to adjust to changes in product demands and produce at competitive costs even on small runs and at above quality levels, has caused its adoption by the major automobile manufacturers. These attributes are of particular interest to Korean automobile manufacturers who due to a small home market need to manufacture in relative small quantities and to export.

This paper considers how such a technology can be implemented. It discusses the key factors to be considered such as strategy, selection and design of the appropriate hardware and software, required organizational changes, and its economic …

The Effects Of Degraded Indoor Air Quality On Employees Working In High Rise Office Buildings, Richard Patrick Luongo

Theses

An examination of the effects of poor indoor air quality on workers in high rise office buildings was conducted. These effects are manifested physiologically, psychologically and economically and originate from sources inside and outside the building, as well as from the building's ventilation system. These sources include combustion products, microorganisms, volatile organic chemicals, cigarette smoke and miscellaneous chemicals. Lower productivity and higher absenteeism are the initial results of these effects. If the situation becomes chronic, an erosion of trust between employer and employee can occur which may eventually serve as the basis for litigation, such as worker's compensation claims and …

A Research Analysis : Differences Between Contemporary Corporate Management And Entrepreneurial Management, Kevin A. Gugliotta

Theses

A research analysis was conducted to distinguish the differences between contemporary corporate management and entrepreneurial management. A major difference is in the attitude, perception, and priority of the senior management and the organizational mission. Other distinguishing differences are related to individual and organizational leadership, organizational hierarchy and structure, decision-making authority, and compensation systems for employees.