Nuclear Engineering Commons^™

Super-Efficient Condiment And Detergent Storage Containers, Anurag Baral, Rehman Chaudry, Andree Cochran

Capstone Design Expo Posters

(1) unmet need - engineering problem being addressed: Approximately fifteen percent of ketchup, detergent and shampoo still remain on the walls of storage containers. Due to this problem, billions of dollars are wasted annually. (2) project deliverables: Models are created to represent working prototypes that are more efficeint for the products. (3) constraints: Glass bottles are less expensive to produce, but are more expensive to transport. (4) approach: Ketchup, shampoo and detergent droplets were placed onto plastics to test which plastic best suited the products. Then, the plastics were coated with candlewax, car wax, beeswax, Alkyl Ketene Dimer (AKD) and …

Microstructured Thin Film Nitinol For A Neurovascular Flow-Diverter, Yanfei Chen, Connor Howe, Yongkuk Lee, Seongsik Cheon, Woon-Hong Yeo, Youngjae Chun

Mechanical and Nuclear Engineering Publications

A cerebral aneurysm occurs as a result of a weakened blood vessel, which allows blood to flow into a sac or a ballooned section. Recent advancement shows that a new device, ‘flow-diverter’, can divert blood flow away from the aneurysm sac. People found that a flow-diverter based on thin film nitinol (TFN), works very effectively, however there are no studies proving the mechanical safety in irregular, curved blood vessels. Here, we study the mechanical behaviors and structural safety of a novel microstructured TFN membrane through the computational and experimental studies, which establish the fundamental aspects of stretching and bending mechanics …

Educational Nuclear Reactor Simulator, Kevin Jeunang, Koueni Tchamambe, Mutasem Albulushi, Malcolm Breckenridge

Capstone Design Expo Posters

The VCU Reactor Simulator provides a solid technical and visual approach to simulating a commercial pressurized water nuclear power plant. The simulator provides several benefits for VCU including: a hands on learning instrument that can be used in nuclear engineering courses, an opportunity for students to gain experience in nuclear modeling and simulation, and a community outreach tool to expand the public’s knowledge of nuclear technology.

In the six years since its inception, the only prior major modification to the simulator was the replacement of in-house written LabVIEW coding as the calculation engine with the RETRAN- 3D code, a program …

Unmanned Aerial Vehicle For Vertically Profiling Ultrafine Particle Distribution, Ahmed Almutawa, Ola Saadeh, Mudaher Alkhawajah, Grant Carey

Capstone Design Expo Posters

Recent epidemiologic studies show that ultrafine particles (UFPs) may play a definitive role in development of pulmonary and cardiovascular diseases, as well as cancer related mortality. In order to support the growing interest in understanding the effects of UFPs on human health, Dr. Chen has developed a miniaturized electronic ultrafine particle sizing device, or mini-eUPS. This device utilizes many of the functions of equipment currently used in laboratory environments to test and measure UFP levels in aerosols, but has been miniaturized to maximize mobility and ease of use. The small size and weight of the device allow a unique ability …

Transparent Furnace For Observing Electrochemical Separation Of Used Nuclear Fuel, Hoor Almazmi, Abbie Dewitte, Kelli Mckenna, Svetlana Ruseva

Capstone Design Expo Posters

Electrochemical separation of used nuclear fuel (UNF) operating at 500°C is confined within a furnace, making it difficult for a visual observation. Thus, flow characteristic predictions from the furnace are often calculated through advanced computational modeling methods. Therefore, it is necessary to develop an innovative idea, combining mechanical and chemical skill sets to design and build a transparent furnace that provides a clear visualization that can later be coupled with an optical flow-visualization method, such as Laser Doppler Anemometry (LDA). Deliverables of the project include the complete design and illustration of the prototype operating up to 500°C. Challenges of the …

Electromechanical Robotic Platform For Patient Motion Management In Radiotherapy, Thomas Dwyer, Ross Cruikshank, Daniel Martinez, Melvin Rosario

Capstone Design Expo Posters

Head and neck cancer is often treated with radiation therapy. During this treatment, patient movement causes healthy cells to receive excessive radiological dose. We have designed an electromechanical robotic platform that enables compensation of patient movement during treatment. This project includes analysis of materials and motion of the system, design of the control system and model, and the functional prototype. The design of the robotic platform will be compatible with pre-existing head and mouth harnesses in order to keep a patient’s head steady while the patient’s headrest in motion. For radiotherapy, this system requires radio-compatible materials. Through the use of …

Continuously Expanding Mandrel, Cory Bleistein, Dylan Dawson, Anton Rabinky, Marshall Smith

Capstone Design Expo Posters

The purpose of this project was to develop a better, safer, more efficient system for Sealeze to manufacture spiral-wrapped strip brushes in a continuous fashion at a variable diameter. The end results produced a finalized drawing sheet for machining and production, numerous design variations within CAD drawings, and extensive mechanical evaluations and analyses proving the strength and capabilities of the proposed design. In production of these brushes, various different materials will be used for the core, backing, and filament, creating a need for a mandrel that will be strong enough to handle the most resiliant of materials while maintaining a …

Flow-Differential Pressure Test Rig, Stuart Jennings, David Keegan, Juan Ramonet, Nicholas Upton

Capstone Design Expo Posters

provider of filters for critical applications in various industries, Porvair Filtration Group often needs to validate the pressure drop across a given filter medium at various flow rates and to perform quality assurance prior to delivery. The Flow-Differential Pressure Test Apparatus will allow for a test cycle with significant savings in time and money for Porvair going forward.

The design uses high-purity deionized water as the test fluid and performs continual filtration to ensure consistent properties. Flow rates of 0-100 gallons per minute at pressures up to 100 psi gauge are achieved by controlling a pump with i) a variable-frequency …

Remote Control Aircraft, Thomas Gutema, Catherine Jones, Judy Liang, Kendall Moore

Capstone Design Expo Posters

The purpose of the RC aircraft design was not to address a problem that has not been solved, but to redesign an aircraft with the intent to understand the practical applications of the building process. Our approach to completing this project involved two phases; the planning phase and the building phase. In the planning phase, we made selections for the airfoil, wing, fuselage, tail, elevators, and ailerons. These choices were made using aeronautical engineering concepts and theory. For the building phase, we focused on materials selection, fabrication, and testing.

During our design process, a lot of time went to choosing …

Formula Hybrid At Vcu: Epicyclic Power Distribution System, Brandon Rivera, Dmitriy Kirzhner, Maxwell O’Neill, Ryan Witko

Capstone Design Expo Posters

In today’s automotive industry, the need for more performance and power efficiency is ever increasing. However, with the growing concern of greenhouse gases and their impact on the environment, petrol burning cars need to be improved. Hybrid powertrains in automotive vehicles are being designed to increase fuel economy, reduce emissions, and improve engine efficiency through gearing all the while being competitive.

Our senior design team has developed an epicyclic power distribution (EPD) system which combines two independent power inputs from an electric motor and an internal combustion engine (ICE). This system has been designed specifically for the Formula Hybrid race …

An Injection And Mixing Element For Delivery And Monitoring Of Inhaled Nitric Oxide, Andrew R. Martin, Chris Jackson, Samuel Fromont, Chloe Pont, Ira M. Katz, Georges Caillobotte

Mechanical and Nuclear Engineering Publications

Background

Inhaled nitric oxide (NO) is a selective pulmonary vasodilator used primarily in the critical care setting for patients concurrently supported by invasive or noninvasive positive pressure ventilation. NO delivery devices interface with ventilator breathing circuits to inject NO in proportion with the flow of air/oxygen through the circuit, in order to maintain a constant, target concentration of inhaled NO.

Methods

In the present article, a NO injection and mixing element is presented. The device borrows from the design of static elements to promote rapid mixing of injected NO-containing gas with breathing circuit gases. Bench experiments are reported to demonstrate …

Sustainability: Reusing Data Center Waste Heat, John Boushra, Kyle Duncan, Aleksandr Kogan, Giang Pham

Capstone Design Expo Posters

Data Centers are facilities used to house a large number of computer systems and their associated components, such as telecommunications and data storage systems. Nowadays many organizations depend on the reliable operation of their data centers for their day to day business operations. Data centers are designed with redundant and backup power supplies, redundant data communications connections, robust cybersecurity protocols and very strict environmental controls. The many computer systems held in a typical data center generate large heat loads that need to be continuously removed with high grade air conditioning systems. Anthem currently owns a large corporate data center in …

Tracking Surgical Instruments, Akia Wells, Samuel Samvura, Brandon Santiago

Capstone Design Expo Posters

Surgical instruments and sponges are mistakenly left inside patients for more than a dozen times a day. Hospitalizations involving a lost instrument or sponge can average costing more than $60,000 for a hospital. The objective of this design project is to develop a simple, innovative tracking flow process that will better keep track of surgical instruments and sponges before and after surgeries. Using high temperature stickers with matrix barcode technology attached to the surgical instruments, the instruments will be easily scanned into a database to track when instruments are checked in and checked out. Before all instruments are used and …

Using Mavt To Incorporate Public Perception When Choosing A Nuclear Fuel Cycle, Stephen Clement

Theses and Dissertations

Nuclear energy is a source of carbon free power. With many countries striving to make deep carbon cuts in their energy sectors, nuclear energy could be a large part of the solution. One of the main obstacles standing in the way of the use of nuclear energy is the issue of used nuclear fuel disposal. According to the NEI, the U.S. creates about 2000 metric tons of used nuclear fuel per year and has generated around 76,000 metric tons of used nuclear fuel over the last 4 decades. While there are technical problems that need to be solved, it is …

Magnetic Materials Characterization And Modeling For The Enhanced Design Of Magnetic Shielding Of Cryomodules In Particle Accelerators., Sanjay K. Sah

Theses and Dissertations

Particle accelerators produce beams of high-energy particles, which are used for both fundamental and applied scientific research and are critical to the development of accelerator driven sub-critical reactor systems. An effective magnetic shield is very important to achieve higher quality factor (Qo) of the cryomodule of a particle accelerator. The allowed value of field inside the cavity due to all external fields (particularly the Earth’s magnetic field) is ~15 mG or less. The goal of this PhD dissertation is to comprehensively study the magnetic properties of commonly used magnetic shielding materials at both cryogenic and room temperatures. This knowledge can …

Remote Sensing Of Neutron And Gamma Radiation Using Aerial Unmanned Autonomous System, Alex Barzilov, Jessica Hartman, Ivan Novikov

Graduate & Professional Student Association Research Forum

With the continuing advancement of nuclear technologies, the detection and identification of radioactive material is a necessary part of commercial and government applications. There is a wide array of options available for detection and identification of material, but most rely on compact devices which are manually positioned. The deployment of robots equipped with detection equipment is not always feasible, especially in locations where there is considerable debris on the ground, or where there are low clearance areas. To solve this, the goal of this research was to design a remote sensing system for radiation using unmanned aerial vehicles (UAVs). A …

Synthesis Of Radioactive Nanostructures In A Research Nuclear Reactor, Maria Camila Garcia Toro

Masters Theses

In this work, the synthesis of radioactive nanostructures by water radiolysis was studied. The irradiation processes were done in the Missouri University of Science and Technology research nuclear reactor (MSTR).

Radioactive gold nanoparticles (AuNPs) were synthesized from aqueous solutions containing the metal salt precursors by radiolysis of water. Seven different samples were irradiated at 200kW of thermal power for 0.5, 1, 3, 5, 10, 30, and 60 minutes. The average sizes of the obtained nanoparticles ranged from 3 nm to 400 nm, it was found that the particle size decreased with the irradiation time. Some agglomerations of particles were found …

Analysis Of Pellet Cladding Interaction And Creep Of U3si2 Fuel For Use In Light Water Reactors, Kathryn E. Metzger

Theses and Dissertations

Following the accident at the Fukushima plant, enhancing the accident tolerance of the light water reactor (LWR) fleet became a topic of serious discussion. Under the direction of congress, the DOE office of Nuclear Energy added accident tolerant fuel development as a primary component to the existing Advanced Fuels Program. The DOE defines accident tolerant fuels as fuels that “in comparison with the standard UO2- Zircaloy system currently used by the nuclear industry, can tolerate loss of active cooling in the reactor core for a considerably longer time period (depending on the LWR system and accident scenario) while maintaining or …

Dosimetry, Activation, And Robotic Instrumentation Damage Modeling Of The Holtec Hi-Storm 100 Spent Nuclear Fuel System, C. Ryan Priest

Theses and Dissertations

The Holtec HI-STORM 100 spent fuel storage system is an intermediate storage mechanism for SNF assemblies. Long term licensing and storage requires consideration of material degradation of the stainless steel multi-purpose canister holding the spent fuel. This material degradation is predicted to take the form of environmentally assisted cracking on weld interfaces of the stainless steel cylinder. Several of these spent fuel storage arrays are located in coastal environments. These sites include both the Hope Creek and Diablo Canyon nuclear power stations. A multi-sensory robotic package is being designed for non-destructive assay of the cask annular environment. It will be …

Deformation Induced Martensitic Transformation In 304 Stainless Steels, Junliang Liu

Theses and Dissertations

304 stainless steel is an austenitic steel widely used for various applications due to a good combination of strength and ductility and relative low cost. It is known to be metastable as the austenite phase can transform into martensite under stress. In this work, a new method (in-situ tensile TEM) and the traditional method (ex-situ tensile tests and TEM, XRD characterization) were used to investigate the mechanisms of deformation-induced martensitic transformation in 304SS samples at different temperatures.

The ex-situ tensile tests were conducted under a strain rate of 10-3 s-1 until rupture. After the tensile tests, the fractured area was …

Measurement Of Rare Earth And Uranium Elements Using Laser-Induced Breakdown Spectroscopy (Libs) In An Aerosol System For Nuclear Safeguards Applications, Ammon N. Williams

Theses and Dissertations

The primary objective of this research is to develop an applied technology and provide an assessment for remotely measuring and analyzing the real time or near real time concentrations of used nuclear fuel (UNF) elements in electrorefiners (ER). Here, Laser-Induced Breakdown Spectroscopy (LIBS) in UNF pyroprocessing facilities was investigated. LIBS is an elemental analysis method, which is based on the emission from plasma generated by focusing a laser beam into the medium. This technology has been reported to be applicable in solids, liquids (includes molten metals), and gases for detecting elements of special nuclear materials. The advantages of applying the …

Thorium-Based Mixed Oxide Fuel In A Pressurized Water Reactor: A Feasibility Analysis With Mcnp, Lucas Powelson Tucker

Doctoral Dissertations

"This dissertation investigates techniques for spent fuel monitoring, and assesses the feasibility of using a thorium-based mixed oxide fuel in a conventional pressurized water reactor for plutonium disposition. Both non-paralyzing and paralyzing dead-time calculations were performed for the Portable Spectroscopic Fast Neutron Probe (N-Probe), which can be used for spent fuel interrogation. Also, a Canberra ³He neutron detector's dead-time was estimated using a combination of subcritical assembly measurements and MCNP simulations. Next, a multitude of fission products were identified as candidates for burnup and spent fuel analysis of irradiated mixed oxide fuel. The best isotopes for these applications were …

Evaluating Of Scale-Up Methodologies Of Gas-Solid Spouted Beds For Coating Triso Nuclear Fuel Particles Using Advanced Measurement Techniques, Neven Y. Ali

Doctoral Dissertations

"The work focuses on implementing for the first time advanced non-invasive measurement techniques to evaluate the scale-up methodology of gas-solid spouted beds for hydrodynamics similarity that has been reported in the literature based on matching dimensionless groups and the new mechanistic scale up methodology that has been developed in our laboratory based on matching the radial profile of gas holdup since the gas dynamics dictate the hydrodynamics of the gas-solid spouted beds. These techniques are gamma-ray computed tomography (CT) to measure the cross-sectional distribution of the phases' holdups and their radial profiles along the bed height and radioactive particle tracking …

Study Of Heat Transfer Phenomenon During Natural Convection, Muhammad Yousaf

Doctoral Dissertations

"The purpose of the present study was to numerically investigate the effects of the roughness elements on the heat transfer during natural convection. A computational algorithm was developed based on the Lattice Boltzmann method to conduct numerical study in two-dimensional rectangular cavities and Rayleigh-Bénard cell. A single relaxation time Bhatnagar-Gross-Krook model of Lattice Boltzmann method was used to solve the coupled momentum and energy equations in two-dimensional lattices. Computational model was validated against previous benchmark solutions, and a good agreement was found to exist. A Newtonian fluid of Prandtl (Pr) number 1.0 was considered for this numerical study. The range …

Proactive Strategies In Personal Dose Monitoring, Prevention And Mitigation, Manish Kumar Sharma

Doctoral Dissertations

"At certain threshold, nuclear radiation (like x-rays and gamma-rays) may adversely impact the health of living tissues. The exposure to these radiations in nuclear facilities is measured by devices called dosimeters. The devices are generally worn on the torso and are monitored by health physics division to report the radiation dose received by the personnel. However, this approach is not proactive--since the dosimeters reflect the dose that has already been absorbed in the body of the wearer.

This work presents a scheme to proactively avoid large dose acquisition at radiation-prone facilities. The work was divided into three major segments: (i) …

Convective Cooling In A Pool-Type Research Reactor, Susan Sipaun, Shoaib Usman

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

A reactor produces heat arising from fission reactions in the nuclear core. In the Missouri University of Science and Technology research reactor (MSTR), this heat is removed by natural convection where the coolant/moderator is demineralised water. Heat energy is transferred from the core into the coolant, and the heated water eventually evaporates from the open pool surface. A secondary cooling system was installed to actively remove excess heat arising from prolonged reactor operations. The nuclear core consists of uranium silicide aluminium dispersion fuel (U₃Si₂Al) in the form of rectangular plates. Gaps between the plates allow coolant …

Analysis Of The Developing States In The Mena Region Seeking Civilian Nuclear Energy, With A Primary Focus On The Kingdom Of Saudi Arabia (Ksa) And The United Arab Emirates (Uae), Thaqal Alhuzaymi, Ayodeji Babatunde Alajo

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

The comprehensive analysis presented here attempts to ana­lyze “newcomer” states in the Middle East and North Africa (MENA), primarily the Kingdom of Saudi Arabia (KSA) and Unit­ed Arab Emirates (UAE), seeking to implement civilian nuclear energy according to their political and economic situations. By investigating their motivations and funding resources for fu­ture nuclear projects, this analysis provides guidance for these states in terms of their nuclear infrastructure and nonprolifera­tion. The overall approach of this analysis relies on the factors for the success of civilian nuclear energy programs identified in experiential studies conducted since the Atoms for Peace speech in 1953.This …

Electrochemical Studies Of Cerium And Uranium In Licl-Kcl Eutectic For Fundamentals Of Pyroprocessing Technology, Dalsung Yoon

Theses and Dissertations

Understanding the characteristics of special nuclear materials in LiCl-KCl eutectic salt is extremely important in terms of effective system operation and material accountability for safeguarding pyroprocessing technology. By considering that uranium (U) is the most abundant and important element in the used nuclear fuel, measurements and analyses of U properties were performed in LiCl-KCl eutectic salt. Therefore, the electrochemical techniques such as cyclic voltammetry (CV), open circuit potential (OCP), Tafel, linear polarization (LP), and electrochemical impedance spectroscopy (EIS) were conducted under different experimental conditions to explore the electrochemical, thermodynamic, and kinetic properties of U in LiCl-KCl eutectic. The ultimate goal …

Thermal Characterization Of Phase Change Materials For Thermal Energy Storage, Rami Mohammad Reda Saeed

Masters Theses

"The study provides a valuable and useful database for Phase Change Materials (PCMs) for Thermal Energy Storage (TES) applications. Only a few existing studies have provided an overall investigation of thermophysical properties of PCMs in this detailed manner. Several organic PCMs, namely Myristic acid, Capric Acid, Lauryl Alcohol, Palmitic acid and Lauric acid, have been characterized after being carefully selected to cover wide range of TES applications. Insights and information gained from this work will be applied toward the design and modelling of many low temperature thermal energy storage applications. The study experimentally investigated uncertainty of thermal characterization of PCMs …

A Feasibility Study Of A Nuclear Power Plant With No Moving Parts, Jonathan Mark Schattke

Masters Theses

"In a nuclear reactor design, every moving part in a system is considered a failure point. In this study, a proposal is made for designing a nuclear reactor that has no moving parts by coupling an accelerator driven core (removing control system moving parts) to a magnetohydrodynamic generator (removing power generation moving parts) using mercury coolant (removing pumping system moving parts). Further safety is realized by using a subcritical core, where the core is never able to sustain a chain reaction on its own, obviating many safety systems. The design is verified with a Monte Carlo simulation "--Abstract, page iii.