Nuclear Engineering Commons^™

Surface Characterization Of Accident Tolerant Fuel Claddings Candidates After Prolonged Exposure To Steam Oxidation, Connor F. Donlan

Theses and Dissertations

Accident Tolerant Fuel Claddings are designed to improve fuel performance and safety in abnormal reactor conditions. The development of these cladding materials has become a top priority for the nuclear community, with incidents such as the Three Mile Island accident and the Fukashima Dai-chi accident. The development of these claddings has resulted in 2 subsections: coating current claddings or replacing cladding materials with new materials. The claddings studied in this thesis are a Zircaloy-4 cladding coated with chromium through physical vapor deposition, Zircaloy-4, and a FeCrAl alloy, C26M. This thesis assessed the surface chemistry, roughness, and wettability after extended exposure …

Computational Modeling Of Radiation Damage In A Multi-Phase Ceramic Waste Form Using Moose, Zeyu Chen

Theses and Dissertations

Ceramic waste forms have been proposed to replace the traditional glassy waste forms for long term stabilization of radionuclides. These waste forms are constantly exposed to self-irradiation emitted from the constituent radionuclides causing their material properties to change accordingly. It has been known that the radiation damage in waste forms is dominated by alpha particles emitted from transuranic (TRU) radionuclides. Since alpha particles usually have a range of 10~20 μm in such waste forms, some fraction of any non-transuranic containing phases (for a multiphase waste form) will be undamaged (or less damaged) if containing large enough grain sizes. Modeling and …

Measurement Of The 160Gd(P,N)160Tb Excitation Function From 4 18 Mev, Using A Stacked Foil Technique, Ryan K. Chapman

Theses and Dissertations

A stack of thin Gd, Ti, and Cu foils were irradiated with an 18 MeV proton beam at Lawrence-Berkeley National Laboratory's 88-Inch Cyclotron to investigate the ¹⁶⁰Gd(p,n)¹⁶⁰Tb nuclear reaction for nuclear forensics applications. This experiment will improve knowledge of ¹⁶⁰Tb production rates, allowing ¹⁶⁰Tb to be efficiently created in a foil stack consisting of other proton induced isotopes for forensics applications. A set of 15 measured cross sections between 4-18 MeV for ¹⁶⁰Gd(p,n)¹⁶⁰Tb were obtained using a stacked foil technique. The foil stack consisted of one stainless steel, one iron, fifteen gadolinium, …

Analysis Of The Correlation Between Re Filament Surface Features And Tims Performance, Christopher J. Mihal

Theses and Dissertations

Thermal Ionization Mass Spectrometry (TIMS) is an invaluable tool in nuclear forensics as it enables isotopic assays of actinides to be measured, permitting analysis to include special nuclear material isotopic assays, nuclear reactor monitoring, and treaty verification. In one method of measurement for the TIMS system, samples are deposited in solution form on high-purity rhenium filaments. The filaments are heated to evaporate the solvent, and then further heated to cause sample ionization, permitting the sample to be transmitted through a magnetic field which separates ions based on mass to charge ratio into detectors for counting. Heavier ions will be deflected …

The Effect Of Aeration Rate And Free-Floating Carrier Media On The Emission Of Bacillus Globigii In Bioaerosols, Andrew J. Owens

Theses and Dissertations

Aerosols produced by turbulent mechanical mixing and bubble aeration at Waste Water Treatment Plants (WWTPs) become bioaerosols with the entrainment of biological materials. Bioaerosols become a public health risk when human pathogens are present. This study evaluated bioaerosols containing Bacillus globigii (BG) spores, and the effects that aeration rate and the addition of Free-Floating Carrier Media (FFCM) had on the amount of BG spores collected following aerosolization. A series of laboratory-scale experiments investigated two different sizes of floating polystyrene spheres as FFCM and four different aeration rates. When the differences in compared aeration rates were sufficiently large, a positive correlation …

An Assessment Of The Spatial Variation Of Isotopic Ratios In A Candu-6 Reactor For Nuclear Treaty Monitoring, Aaron W. Burkhardt

Theses and Dissertations

The Preparatory Commission for the Comprehensive Nuclear Test Ban Treaty Organization developed the International Monitoring System for monitoring for nuclear explosive testing and compliance with nuclear treaties. Many of the International Monitoring System stations are capable of detecting radionuclides that can be used to determine their origin and creation environment. However, there is not a single unique signature associated with each creation environment. Nuclear reactors, for example, can have a wide range of isotopic concentrations caused by spatial variations in neutron flux intensity and energy. As a single sample only provides a single isotopic measurement, this can make disambiguation difficult …

A Machine Learning Approach To Characterizing Particle Morphology In Nuclear Forensics, Daniel A. Gum

Theses and Dissertations

A machine learning approach is taken to characterizing a group of synthetic uranium bearing particles. SEM images of these lab-created particles were converted into a binary representation that captured morphological features in accordance with a guide established by Los Alamos National Laboratory. Each particle in the dataset contains an association with chemical creation conditions: processing method, precipitation temperature and pH, calcination temperature are most closely tied to particle morphology. Additionally, trained classifiers are able to relate final products between particles, implying that morphological features are shared between particles with similar composition.

Rapid Analysis Of Plutonium Surrogate Material Via Hand-Held Laser-Induced Breakdown Spectroscopy, Ashwin P. Rao

Theses and Dissertations

This work investigated the capability of a portable LIBS device to detect and quantify dopants in plutonium surrogate alloys, specifically gallium, which is a common stabilizer used in plutonium alloys. The SciAps Z500-ER was utilized to collect spectral data from cerium-gallium alloys of varying gallium concentrations. Calibration models were built to process spectra from the Ce-Ga alloys and calculate gallium concentration from spectral emission intensities. Univariate and multivariate analysis techniques were used to determine limits of detection of different emission line ratios. Spatial mapping measurements were conducted to determine the device's ability to detect variations in gallium concentration on the …

Determination Of Lithium Isotope Concentration By Laser Induced Breakdown Spectroscopy Using Chemometrics, Jason C. Wood

Theses and Dissertations

The role of enriched 6Li in nuclear applications makes the ability to detect and monitor lithium enrichment activity imperative. Detecting levels of enrichment of this isotope currently requires sensitive, complex equipment operated by highly-trained technicians, which is prohibitive to rapid detection of enrichment activity. While commercial companies market portable laser induced breakdown spectroscopy (LIBS) with the ability to detect elements on the order or parts per million concentrations, they have not yet been demonstrated to possess the ability to quantitatively determine isotopic concentrations of lithium. This research performs single-pulse LIBS experiments under laboratory conditions to determine concentrations of 7Li and …

Determination And Simulation Of The Neutron Spectrum Of Nuclear Detonations And Surrogate Sources, Taylor M. Nichols

Theses and Dissertations

This research determined a methodology for characterizing the Fast Beam Facility (FBF) at The Ohio State University Nuclear Reactor Laboratory to test the response of photovoltaic arrays to nuclear weapon radiation. Additionally, this research developed neutron and gamma nuclear weapon output spectra of two environments for comparison to the FBF spectrum. A Bonner sphere spectrometer (BSS), coupled with the unfolding program Maximum Entropy Deconvolution (MAXED), was employed as a means of determining the energy spectrum of neutrons. Using the ISO 8529 americium beryllium (AmBe) source as the a priori default spectrum, MAXED was used to unfold the spectrum of neutrons …

Neutron Energy Effects On Asteroid Deflection, Lansing S. Horan Iv

Theses and Dissertations

In the future, a hazardous asteroid will find itself on a collision course with Earth. It is an inevitability; the question is not if, but when. For asteroids of moderate size or larger, a nuclear device is one of humanity's only technologies capable of mitigating this threat via deflection on a timescale of less than a decade. This work examined how changing the output neutron energy from a nuclear device detonation affects asteroid deflection. The notional asteroid target was 300 meters in diameter and composed of silicon dioxide at a bulk density of 1.855 g/cm³. To calculate the …

Neutron Displacement Damage In Germanium Tin Photodiodes, Nathan J. Gale

Theses and Dissertations

GeSn is a promising material for photodiodes in the near-to-mid infrared (IR) spectrum because of new growth methods that enable integration with complementary metal oxide semiconductor (CMOS) technology. While natural germanium has a threshold wavelength of 1800 nm, 6.9 Sn content extends the threshold wavelength to 2700 nm based on a Sn content dependent bandgap. Also, unlike other semiconductors that require liquid nitrogen cooling to act as an IR sensor, GeSn can be operated at room temperature, enabling a wide variety of applications. In this study, photodiodes ranging from 0 to 6.9 tin content were subjected to 1 MeV (Si) …

Evaluating The Effectiveness Of Aerospace Materials, Vehicle Shape And Astronaut Position At Lowering The Whole Body Effective Dose Equivalent In Deep Space, Daniel K. Bond

Theses and Dissertations

As future crewed, deep space missions are being planned, it is important to assess how spacecraft design can be used to minimize radiation exposure. Collectively with shielding material, vehicle shape and astronaut position must be used to protect astronauts from the two primary sources of space radiation: Galactic Cosmic Rays (GCR) and Solar Particle Events (SPE). GCRs, which are composed of low intensity, highly energetic, and fully ionized stable and meta-stable isotopes, are considered a chronic source of radiation risk to the astronauts. SPEs, which originate from solar coronal mass ejections, are composed mostly of high intensity protons that can …

Development Of Near-Real Time Material Detection And Analysis By Coupling Electrochemical & Optical Spectroscopy Methods For Molten Salt Systems, Hunter Andrews

Theses and Dissertations

For both pyroprocessing and molten salt reactors (MSRs), it is desirable from a process control and nuclear safeguards perspective to monitor the species in the molten salts for material accountancy. Many traditional monitoring techniques, even simple salt sample retrieval, are time exhaustive or rendered useless for these systems due to the high thermal loads, high radiation zones, and corrosive nature of molten salts. Therefore, the main motivation for this work is the need for an online monitoring system for a molten salt system that is robust enough to handle the extreme environment yet deliver quantifiable salt concentrations. The intent of …

Reducing Material Attractiveness Utilizing Pu-238 And U-232, Cody Lloyd

Theses and Dissertations

Decreasing the material attractiveness of uranium and plutonium materials is crucial to nuclear nonproliferation. The International Atomic Energy Agency (IAEA) implements safeguards across the world on a limited budget. Not only does decreasing material attractiveness reduce the possibility of proliferation, but also may lighten the financial burden on the IAEA if safeguards can be reduced. Two particular isotopes that have negative material attractiveness traits are ²³⁸Pu and ²³²U. Without isotopic separation technology, these isotopes cannot be removed from plutonium and uranium materials respectively. Both ²³⁸Pu and ²³²U produce large quantities of heat by alpha decay. High …

Characterization And Drying Of Oxyhydroxides On Aluminum Clad Spent Nuclear Fuel, Matthew Shalloo

Theses and Dissertations

Research reactors such as the Advanced Test Reactor (ATR) and the High Flux Isotope Reactor (HFIR) employ aluminum-clad fuel elements made up of many thin plates with uranium dispersed within. In most engineering applications, aluminum is considered to have favorable corrosion characteristics. It forms a thin oxide layer [Al2O3] under atmospheric conditions that is impenetrable to oxygen thus stopping any further corrosion. However, both aluminum metal and Al2O3 react with water to form hydrous oxides which are less protective against further corrosion and form significantly thicker layers than oxidation in dry air. As a result, aluminum-clad spent nuclear fuel (ASNF) …

Modeling Neutron Interaction Inside A 2d Reactor Using Monte Carlo Method, A. S. M. Fakhrul Islam

Theses and Dissertations

Scientists and engineers have been working for many years to develop accurate approaches to analyzing nuclear power reactors using computer codes that closely model the behavior of neutrons in a reactor core. The Monte Carlo simulation method is capable of treating complex geometries with a high level of resolution and fidelity to model neutron interactions inside a reactor core. With the requirement of accurate modeling in reactor physics and dynamics and great innovation of computer technology, Monte Carlo method is becoming an ever more powerful tool and receiving rising attention. In this study, Monte Carlo method is used to model …

Bison Simulation-Based Identification Of Important Design Criteria For U3si2 Fuels With Composite-Monolithic Duplex Sic Cladding, Jacob A. Yingling

Theses and Dissertations

Accident Tolerant Fuels (ATF) require a combination of fuel and cladding which have comparable longevity characteristics to UO2 while improving resistance to radiological release during and after accidents. U3Si2 has been proposed for use in ATF concepts for its high uranium density and high thermal conductivity which provide improved fuel performance. However, some of U3Si2’s material properties are not well understood. One such property, thermal creep of U3Si2, is an important contributing factor to U3Si2’s viability as an ATF. No experimentally derived thermal creep model is published for U3Si2, and previous analyses of compressive thermal creep experimental data lack statistical …

Modeling The Uranium-Silicon Phase Equilibria Based On Computational And Experimental Analysis, Tashiema Lixona Ulrich

Theses and Dissertations

As part of Accident tolerant fuel initiative, the uranium-silicide compound, U3Si2, is under consideration as a potential replacement for conventional uranium dioxide fuel. It is of interest as its higher uranium density of 11.3 g(U)/cm3 compared to 9.7 g(U)/cm3 for UO2 may allow use of more robust, but less neutronically economical fuel cladding. The improved uranium content would not only accommodate the neutronic penalty inherent to certain accident tolerant cladding concepts but also facilitate improved reactor performance with the potential for longer fuel cycles.

The U-Si system has been the subject of various studies that mainly focused on thermophysical properties, …

Enabling Mobile Neutron Detection Systems With Clyc, Matthew C. Recker

Theses and Dissertations

Cs₂LiYCl₆:Ce³⁺ (CLYC) has the desirable property of being sensitive to both gamma rays and neutrons while producing waveforms suitable for pulse shape discrimination (PSD) to determine which radiation was detected. This dissertation examines the behavior of CLYC to support its further development for mobile and portable applications. First, the feasibility of performing PSD with CLYC and an inexpensive data acquisition system was examined. This system was able to clearly distinguish both events with a figure of merit of 1.42. Next, the performance of a SiPM was compared to a traditional PMT. Analysis showed that the …

Investigations Of Point Defects In Kh2Po4 Crystals Using Ab Initio Quantum Methods, Tabitha E. R. Dodson

Theses and Dissertations

Potassium dihydrogen phosphate (KH₂PO₄, or commonly called KDP) crystals can be grown to large sizes and are used for many important devices (fast optical switches, frequency conversion, polarization rotation) for high powered lasers. The nonlinear optical material has a wide intrinsic transparency range. Intrinsic point defects are responsible for several short-lived absorption bands in the visible and ultraviolet regions that affect high-power pulsed laser propagation. The primary intrinsic defects have been experimentally detected in KDP using electron paramagnetic resonance (EPR) experiments. The defect models established thus far include (i) self-trapped holes, (ii) oxygen vacancies, and (iii) …

Point Defects In Lithium Gallate And Gallium Oxide, Christopher A. Lenyk

Theses and Dissertations

Electron paramagnetic resonance (EPR), Fourier-Transform Infrared spectroscopy (FTIR), photoluminescence (PL), thermoluminescence (TL), and wavelength-dependent TL are used to identify and characterize point defects in lithium gallate and β-gallium oxide doped with Mg and Fe acceptor impurities single crystals. EPR investigations of LiGaO₂ identify fundamental intrinsic cation defects lithium (V⁻_Li) and gallium (V²⁻_Ga) vacancies. The defects’ principle g values are found through angular dependence studies and atomic-scale models for these new defects are proposed. Thermoluminescence measurements estimate the activation energy of lithium vacancies at Ea = 1.05 eV and gallium vacancies at Ea > 2 …

Implementation Of View Factor Model And Radiative Heat Transfer Model In Moose, Abdurrahman Ozturk

Theses and Dissertations

View factors are functions that represent the geometric relationship between surfaces. They are important parameters for radiative heat transfer calculations. View factor catalogues are available for simple geometries in the current literature. However, in the case of complicated geometry, analytical or numerical methods are needed to evaluate view factors. The Monte Carlo (MC) method is the most flexible one among numerical methods, which are used to calculate view factors, since it can be applied to any geometry.

When experimental studies are not affordable to conduct, modeling of engineering problems gains more importance. Idaho National Laboratory (INL)’s finite element framework Multiphysics …

Modeling Complex Oxides: Thermochemical Behavior Of Nepheline-Forming Na-Al-Si-B-K-Li-Ca-Mg-Fe-O And Hollandite-Forming Ba-Cs-Ti-Cr-Al-Fe- Ga-O Systems, Stephen A. Utlak

Theses and Dissertations

High concentrations of Na2O and Al2O3 in the liquid high-level radioactive waste (HLW) stored at the Hanford Site can cause nepheline (NaAlSiO4) to precipitate in a vitrified monolithic waste form upon cooling. Nepheline phase formation removes glass- former SiO2 and -modifier Al2O3 from the immobilization matrix in greater proportion to alkalis, which can reduce glass durability and consequently increase the leach rate of radionuclides into the surrounding environment.

Current uncertainty in defining the HLW glass composition region prone to precipitating nepheline necessitates targeting a conservative waste loading, which raises operational costs by extending the liquid radioactive waste disposal mission and …

Modeling Complex Oxides: Thermochemical Behavior Of Nepheline-Forming Na-Al-Si-B-K-Li-Ca-Mg-Fe-O And Hollandite-Forming Ba-Cs-Ti-Cr-Al-Fe- Ga-O Systems, Stephen A. Utlak

Theses and Dissertations

High concentrations of Na2O and Al2O3 in the liquid high-level radioactive waste (HLW) stored at the Hanford Site can cause nepheline (NaAlSiO4) to precipitate in a vitrified monolithic waste form upon cooling. Nepheline phase formation removes glass- former SiO2 and -modifier Al2O3 from the immobilization matrix in greater proportion to alkalis, which can reduce glass durability and consequently increase the leach rate of radionuclides into the surrounding environment.

Current uncertainty in defining the HLW glass composition region prone to precipitating nepheline necessitates targeting a conservative waste loading, which raises operational costs by extending the liquid radioactive waste disposal mission and …

Uranium Dioxide Actinide Detection Device Support Design For Space Applications, Jennifer N. Ramos

Theses and Dissertations

Attention concerning the proliferation of nuclear weapons and materials has generated many research initiatives to detect, identify, and locate radiation emitted by actinides. In support of this effort, the `Fission Induced Neutron Detection of Nuclear Materials' (FIND'NM) program was established to comprise a joint effort to explore this issue. The objective also co-extends the Air Force Research Laboratory uranium dioxide (UO2) detection sample growth, characterization, and electrical interface research. AFIT's study accomplishes the design and fabrication of a space-tolerant PCB to support a UO2-based neutron detector. Further design considerations are made with the expectation of the platform to be inside …

Development Of A Mixed-Radiation Directional Rotating Scatter Mask Detection System, Bryan V. Egner

Theses and Dissertations

Previous work demonstrated gamma-ray directional detection through the integration of a radiation detection system and an additively manufactured rotating scatter mask (RSM). This work advances the RSM directional detection system through improvements in the system's design, validation of a new scatter mask, and the novel ability to directionally detect both neutrons and gamma rays, a desirable feature for many nuclear safeguard and counterproliferation applications. The mixed-radiation RSM system developed for this research utilized the Spartan I mask design coupled with a 1" EJ-309 liquid scintillator. A GEome-try ANd Tracking (Geant4) model is developed and quantitatively compared to experimental measurements for …

Nuclear Data Covariance Analysis Of An Energy Tuning Assembly For Simulating Nuclear Weapon Environments, Nicholas J. Quartemont

Theses and Dissertations

An energy tuning assembly was characterized to spectrally shape the National Ignition Facility neutron source to a notional thermonuclear and prompt fission neutron spectrum to approximate a boosted nuclear device. This research performed nuclear data covariance analysis to predict the performance of the energy tuning assembly to create the objective spectrum, assessed anticipated experimental outcomes, and determine the fission products produced in a highly enriched uranium foil in the sample cavity. Nuclear data covariance impacted the neutron fluence energy distribution by a few percent for a large energy range of the neutron fluence. Neutron flux unfolding techniques provided broad spectral …

Compositional Analysis Of Cerium And Cesium In Rapid Setting Cement As An Immobilization Agent For Nuclear Waste, Riyadh M. Motny

Theses and Dissertations

A feasibility of rapid setting cement (RSC) as an agent of immobilization for certain elements such as fission products or radioactive materials was explored. Cerium (Ce) and cesium (Cs) have been selected as a surrogate for U and/or Pu and fission products, respectively, in this study in three phases. In Phase I, RSC was evaluated for physical properties (e.g., porosity, density, pH values, etc.) using two groups methods—the cement powder at different concentrations of Ce (2 – 10 wt%) with deionized water (DIW) and artificial seawater (ASW). The results showed that the final setting time and compressive strength of RSC …

Electrochemical Separation Of Multivalent Species On A Liquid Bismuth Cathode In Licl-Kcl Eutectic For Used Nuclear Fuel Reprocessing, Michael Woods

Theses and Dissertations

The presence of group I/II fission products (Cs-137, Sr-90, and Ba-137) within molten salt nuclear processes degrades operational efficiencies by contributing to increased radiation levels in the case of material handling processes or to loss of criticality in the case of a reactor. While methods such as zone freezing and ion exchange have been proven for the separation of these fission products in LiCl-KCl salts, they require extra equipment and processing steps. Addition of a liquid metal electrode to molten salt media, such as the electrorefiner of a pyroprocessing scheme or the salt cleaning stage of a molten salt fast …