Nuclear Engineering Commons^™

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #1, Georg F. Mauer

Fuels Campaign (TRP)

The first three months of the project covered the following:

• Literature review: A comprehensive study of the pertinent publications pertaining to transmuter fuels composition and manufacturing processes was conducted.

• Visit at ANL West in Idaho Falls, ID: Dr. Mauer visited the ANL West facility and met with his National Laboratory Collaborator, Dr. Mitchell K. Meyer, Group Leader, Fabrication Development on October 14 and 15, 2001.

• Student Paper Presentation at the ANS Annual Meeting by Ph.D. student Mr. Jae-Kyu Lee. Title: Transmuter Fuel Fabrication Processes.

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials: Aaa Task-4 Quarterly (September 1 – November 30, 2001) Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The primary objective of this task is to evaluate the effect of hydrogen on environment-assisted cracking of candidate materials for applications in spallation-neutron-target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). The materials selected for evaluation and characterization are martensitic stainless steels including HT- 9, EP 823 and 422. The susceptibility to stress corrosion cracking (SCC) and hydrogen embrittlement (HE) of these alloys will be evaluated in environments of interest using tensile specimens under constant load and slow-strain-rate (SSR) conditions. The extent and morphology of cracking of these alloys will further be evaluated …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823: Task 10, First Quarter Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The objective of this task is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading target material for accelerator-driven waste transmutation applications. The test material will be thermally treated prior to evaluation of its tensile properties at temperatures relevant to the transmutation applications. The deformation characteristics of tensile specimens, upon completion of testing, will be evaluated by surface analytical techniques including scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The overall results are expected to provide a mechanistic understanding of high-temperature deformation behavior of Alloy EP-823 as a function of heat treatment.

Highlights of Accomplishment

• …

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

We examined stainless samples that were exposed to LBE in experiments conducted by the Russians, under contract to Los Alamos. We examined both corroded and uncorroded samples using the Scanning Electron Microscope (SEM), the Energy Dispersive X-Ray (EDAX) Spectroscopy, and the X-ray Photoelectron Spectrometer (XPS). We found that the surface of the corroded sample is covered by oxygen-containing compounds, presumably mostly iron oxide. In samples exposed for shorter times or lower temperatures, we found that some areas were covered by an oxide layer, and some areas was uncovered. We found that the level of Cr in the uncovered area is …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics: Quarterly Progress Report August 16,2001- November 15, 2001, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the AAA proposed application.

Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with very limited density. The transport of oxygen and corrosion products, their interaction and variation of corrosion/precipitation along the flow are not well understood.

The first subtask of this project involves using a …

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 8/16/01- 11/15/01, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

The AAA program is developing technology for the transmutation of nuclear waste to address many of the long-term disposal issues. An integral part of this program is the proposed chemical separations scheme.

Two activities are proposed in this Phase I task: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project is to streamline and improve an integral part …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides: Quarterly Progress Report 8/16/01- 11/15/01, Yitung Chen, Randy Clarksean, Darrell Pepper

Fuels Campaign (TRP)

An important aspect of the Advanced Accelerator Applications (AAA) program is the development of a casting process by which volatile actinide element (i.e., americium) can be incorporated into metallic alloy fuel pins. The traditional metal fuel casting process uses an inductively heated crucible. The process involves evacuation of the furnace. The evacuation of the furnace also evacuates quartz rods used as fuel pin molds. Once evacuated the open ends of the molds are lowered into the melt; the casting furnace is then rapidly pressurized, forcing the molten metal up into the evacuated molds where solidification occurs.

This process works well …

Assessment Of Criticality Safety For Cylindrical Containers To Be Used In The Processing Of Spent Fuel, William Culbreth, Daniel R. Lowe, Jason Viggato

Separations Campaign (TRP)

The UREX process separates uranium from transuranic wastes (TRU) and fission products (FP). Nuclear reactors require fissile isotopes that will absorb neutrons and break apart into smaller nuclei while releasing a large amount of energy as well as multiple neutrons. Fissile isotopes in spent fuel include not only ²³⁵U, but also ²³⁹Pu, ²⁴¹Pu, and several isotopes of americium (Am) and curium (Cm).

TRU contains the actinides with atomic numbers greater than that of uranium. This includes Pu, Np, Am, and Cm. When TRU is separated from uranium, the TRU still poses a significant risk of sustaining a …

University Of Nevada, Las Vegas Advanced Accelerator Applications University Participation Program: Quarterly Report, Second Quarter (June To August 2001), Anthony Hechanova

Transmutation Research Program Reports (TRP)

This Quarterly Report is a primary deliverable from the University of Nevada, Las Vegas (UNLV) Advanced Accelerator Applications (AAA) University Participation Program (UPP) Director to the U.S. Department of Energy (DOE) as described in the UNLV AAA proposal.

The UNLV AAA UPP Director implements the program’s administration using staff from the Harry Reid Center for Environmental Studies (HRC) to ensure that work conducted under the UNLV AAA UPP meets program objectives. The UNLV AAA UPP consists of three components: Program Administration, Research Infrastructure Augmentation, and Student Research.

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials: Aaa Task-4 Quarterly (June 1 – August 31, 2001) Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The subject task entitled “Hydrogen-Induced Embrittlement of Candidate Target Materials for Applications in Spallation-Neutron-Target Systems” had commenced during the quarter ending on August 31, 2001. A research account has been established, contracts for both faculty and students have been prepared, and efforts are well underway to embark on the related research activities, as proposed.

As the title of this project implies, the primary objective of this task is to evaluate the effect of hydrogen on environment-assisted cracking of candidate materials for applications in spallationneutron- target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides: Quarterly Report 5/15/01-8/15/01, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

No abstract provided.

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

The goal is to achieve a basic understanding of the corrosion of stainless steel by Lead Bismuth Eutectic (LBE), which has been proposed for use in the transmuter as both a coolant and as a sputtering target.

Radiation Transport Modeling Of Beam-Target Experiments For The Aaa Project, William Culbreth

Reactor Campaign (TRP)

The AAA program will rely on the use of an accelerator-based transmuter to expose spent nuclear fuel to high-energy neutrons. The neutron flux will be sufficient to activate or fission the long-lived isotopes of Tc, I, Pu, Am, Cm, and Np that present a significant safety hazard in commercial spent fuel. Transmuter fuel will be subcritical and a high-energy proton accelerator is needed to maintain the necessary neutron flux through the use of a neutron spallation target. The maximum neutron energy produced by spallation (~ 600 MeV) is significantly higher than that produced by a commercial light water reactor (~ …

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The objective of this project is the design and evaluation of manufacturing processes for transmuter fuel fabrication. A detailed design description for the manufacturing of each candidate fuel type would support the informed selection of fuel for a transmutation system. We will collect pertinent manufacturing and process-related information and create an information database that will document the design, operations, and cost implications of various fuel choices. Fabrication processes for different fuel types will likely differ in terms of equipment types, throughput, and cost.

Year 1 of the project will be devoted to the analysis and assessment of the multiple steps …

Nuclear Criticality Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth, Pang Tao

Separations Campaign (TRP)

To mitigate the waste created by conventional fission reactors, spent nuclear fuel must be mechanically separated from its cladding. For the development of fuel processing technology to support the Advanced Accelerator Applications (AAA) Program, aqueous and pyrochemical processes will be used to further separate technetium and iodine, uranium and the higher actinides (see Figure 1 for an example of the process layout)1. The higher actinides, including plutonium, americium, curium, and neptunium will be separated from the waste to facilitate their fabrication into new fuel for placement in a transmuter. High-energy neutrons generated by spallation in the transmuter break down these …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP- 823, a leading target material for accelerator-driven waste transmutation applications. This alloy has been proven to be an excellent structural material to contain the lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. However, very little data exist in the open literature on the tensile properties of this alloy. The selection of Alloy EP-823 as the test material in the proposed task is based on the recommendation of our collaborator at the Los Alamos National Laboratory (LANL). The test material will be thermally treated …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Darrell Pepper, Randy Clarksean

Separations Campaign (TRP)

Two activities are proposed: the development of a Systems Engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model will be the start of an integrated approach to the analysis of the materials separations associated with the national AAA program. A second portion of the project will streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral to the systems engineering …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The proposed work will combine chemical kinetics and hydrodynamics in target and test-loop lead-bismuth eutectic (LBE) systems to model system corrosion effects. This approach will result in a predicative tool that can be validated with corrosion test data, used to systematically design tests and interpret the results, and provide guidance for optimization in LBE system designs. The task includes of two subtasks. The first subtask is to try to develop the necessary predictive tools to be able to predict the levels of oxygen and corrosion products close to the boundary layer through the use of Computational Fluid Dynamics (CFD) modeling. …

Hydrogen-Induced Embrittlement Of Candidate Target Materials For Applications In Spallation-Neutron-Target Systems, Brendan O'Toole, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the effect of hydrogen on cracking of candidate target materials for applications in spallation-neutron-target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). The test materials will undergo appropriate thermal treatments prior to being hydrogen-charged by potentiostatic cathodic polarization technique in a simulated aqueous environment at different temperatures of interest. The specimens, upon completion of testing, will be metallographically examined. Further, the scanning electron microscopy (SEM) will be used to determine the extent and nature of cracking in the specimens tested. The thrust of the proposed …

University Of Nevada, Las Vegas Advanced Accelerator Applications University Participation Program: Quarterly Report First Quarter (March-May 2001), Anthony Hechanova

Transmutation Research Program Reports (TRP)

This Quarterly Report is a primary deliverable from the University of Nevada, Las Vegas (UNLV) Advanced Accelerator Applications (AAA) University Participation Program (UPP) director to the U.S. Department of Energy Office of Nuclear Energy, Science and Technology (DOE-NE) as defined in the UNLV AAA Proposal.

The foundation of the UNLV AAA University Participation Program started as a grassroots effort in the late 1990s among community members and local, state, and federal representatives to encourage research and development of technical alternatives to direct disposal of used nuclear fuel which had been targeted since the early 1980s for Yucca Mountain, Nevada. A …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

UNLV investigators will evaluate and select a process for the melt casting of metallic fuel pins that contain volatile actinides. This work will be performed with the guidance of Argonne National Laboratory (ANL) engineers to insure that their knowledge and experience benefits the project. The research to be conducted during year one will center on selecting, evaluating, and modeling potential alternatives to the traditional injection casting process used at ANL. Processing conditions will be analyzed, basic models utilized, and detailed heat and mass transfer models will be developed to analyze the most promising processes. The goal of the first year …

Assessment Of The Effects Of Entrainment And Wind Shear On Nuclear Cloud Rise Modeling, Daniel E. Zalewski

Theses and Dissertations

The Missile Defense Agency (MDA) plans to construct, during a two-week period, an X-Band Radar (XBR) on Shemya, AK. Wind speeds must not, at any time during the construction, exceed a 25 knot limit set by the MDA for lifting the massive dome panels into place. The goal of this research was to explore the possibilities of long-range forecasts to determine the feasibility of predicting any upcoming two-week windows of opportunity, well in advance, that will ensure the successful completion of constructing the XBR on Shemya. In order to reach this goal, the following objectives were achieved; (1) a climatological …

Simulating Wet Deposition Of Radiocesium From The Chernobyl Accident, Aaron M. Kinser

Theses and Dissertations

In response to the Chernobyl nuclear power plant accident of 1986, a cesium-137 deposition dataset was assembled. Most of the airborne Chernobyl cesium was wet deposited, either via interception by falling raindrops or via absorption into cloud droplets destined to become raindrops. The Hybrid Single-Particle Lagrangian rated Transport (HYSPLIT) model, developed at Air Resources Laboratory, is used to simulate the transport and deposition of Chernobyl cesium-137. A cloud base parameterization modification is tested and appears to slightly improve the accuracy of one HYSPLIT simulation of daily Chernobyl cesium-137 deposition over the course of the accident at isolated European sites, and …

Report Of The State Nuclear Safety Advisor Submitted To The Governor And 120th Legislature As Of January 15, 2001, Paula M. Craighead

Maine Collection

Report of the State Nuclear Safety Advisor submitted to the Governor and 120th Legislature As of January 15, 2001

Paula M. Craighead, State Nuclear Safety Advisor, Executive Department, Maine State Planning Office, Augusta, Maine, 2001.

Contents: Introduction and Executive Summary / I. Maine Yankee Decommissioning / II. Portsmouth Naval Shipyard (PNS) / III. Low-Level Radioactive Waste (LLRW) / IV. High Level Radioactive Waste / V. Transport Routes and Safety Response / VI. Shipments / VII. Status of Federal and State Legal and Administrative Proceedings / References and Resources / Glossary

Experimental Investigation Of Steel Corrosion In Lead Bismuth Eutectic (Lbe): Characterization, Species Identification, And Chemical Reactions, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

The goal of the present research is to achieve a basic understanding of corrosion of steels by Lead Bismuth Eutectic (LBE). Liquid LBE is under consideration in the transmuter as both a coolant and a target material. There have been studies of LBE, especially by the Russians, but a fundamental understanding and verification of its role in the corrosion of steels is still very 2 incomplete. Post-experiment testing and analysis will be performed on steel samples that have been in intimate contact with LBE. Chemical alterations and resulting chemical species will be measured at the steel surface. Techniques to be …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Physical And Managed Risk Of Nuclear Waste, Lennart Sjöberg, Britt-Marie Drottz-Sjöberg

RISK: Health, Safety & Environment (1990-2002)

The authors describe their work on the perceived risk of nuclear waste in Sweden. Three levels of waste were studied, and comparisons between the perceptions of the public, politicians and nuclear experts are made.

Book Review Of Alla Yaroshinskaya, Chernobyl: The Forbidden Truth, John M. Gleason

RISK: Health, Safety & Environment (1990-2002)

Review of the book: Alla Yaroshinskaya, Chernobyl: The Forbidden Truth (Michele Kahn & Julia Sallabank, trans. University of Nebraska Press 1995). Introduction, foreword, list of illustrations, photographs. ISBN 0-8032-4912-8. [136 pp. Cloth $25.00; Paper $10.00. 312 N. 14th Street, Lincoln NE 68588-0484.]

The Decision To Reactivate A First-Generation Soviet Nuclear Power Plant: Conceptual And Decision-Analytic Frameworks, John M. Gleason

RISK: Health, Safety & Environment (1990-2002)

Explores a variety of factors that led to reopening the Armenian Metsamor facility notwithstanding general agreement that this is unwarranted technologically.

Maximum Individual & Vicinity-Average Dose For A Geologic Repository Containing Radioactive Waste, Thomas H. Pigford

RISK: Health, Safety & Environment (1990-2002)

Explains the basis for his strong dissent to an NAS report on Yucca Mountain.