Nuclear Engineering Commons^™

Fundamental Chemistry Of U And Pu In The Tbp-Dodecane-Nitric Acid System: Quaterly Report January - March, 2005, Kenneth Czerwinski, Cynthia-May Gong, Amber Wright

Separations Campaign (TRP)

The speciation of hexavalent U and tetravalent Pu will be examined in the TBP-dodecane-nitric acid systems. This topic is chosen based on data needs for separation modeling identified by the AFCI. Emphasis will be placed on studying the influence of nitrate and acetohydroxamic acid on U and Pu speciation as well as conditions where a third phase forms in the organic phase. The organic phase will be 30% TBP in dodecane. Equal volumes of aqueous and organic phase will be used. The speciation of the actinides in the aqueous and organic phase will be determined by a number of different …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Fundamental Chemistry Of U And Pu In The Tbp-Dodecane-Nitric Acid System, Kenneth Czerwinski, Byron Bennett

Separations Campaign (TRP)

The speciation of hexavalent U and tetravalent Pu will be examined in the TBP-dodecane-nitric acid systems. This topic is chosen based on data needs for separation modeling identified by the AFCI. Emphasis will be placed on studying the influence of nitrate and acetohydroxamic acid on U and Pu speciation as well as conditions where a third phase forms in the organic phase. The organic phase will be 30% TBP in dodecane. Equal volumes of aqueous and organic phase will be used. The speciation of the actinides in the aqueous and organic phase will be determined by a number of different …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Xiaolong Wu

UNLV Theses, Dissertations, Professional Papers, and Capstones

Fundamental issues related to the selection of a metallic fuel casting furnace design are presented and discussed including heating mechanisms, casting issues, crucible design, and issues related to the mass transport of americium. The process of evaluating all of these different criteria is undertaken to select a concept that would have the greatest chance of success for casting americium in a metallic fuel rod. Based on this evaluation process, a concept for the casting of metallic fuel pins containing high vapor pressure materials is selected and discussed. The important physics of this concept include mass transport of americium from the …

Modeling And Simulation Of The Chemical Etching Process In Niobium Cavities, Qin Xue

UNLV Theses, Dissertations, Professional Papers, and Capstones

Niobium Cavities are important parts of the integrated NC/SC high-power linear accelerator (linac) that can accelerate over 100 mA of protons to several GeV. Surface finish of the niobium cavity plays an important role of achieving the best performance of niobium cavity. The chemical etching techniques have been widely used.

Chemical etching of the inner surface of the cavity is achieved by circulating acid through it. The acid interacts with the surface and eliminates imperfections. During the etching process, a pipe with baffles is inserted within the cavity to direct the flow along the surfaces.

A 2-D, axisymmetric, steady state, …

Development Of A Model For Induction Heating, Randy Clarksean, Yitung Chen

Fuels Campaign (TRP)

There are two coupled equations that must be solved in order to determine the power deposition. The numerical solution of these equations is needed in order to apply a source term within the energy equations. These equations have previously solved in FIDAP. That implementation used modified versions of the momentum and energy equations to provide a mechanism for the solution of two coupled equations. Currently, we want to solve for the induction heating field in addition to the flow field and the energy equation. In order to do this, a mechanism has to be defined within FIDAP to solve these …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

A Mathematical Model And Simulation Of Natural Circulation Loop Thermalhydraulics, Nihad E. Daidzic

Aviation Department Publications

In this work, a simple, nonlinear, seventh-order mathematical model with lumped parameter analysis of the thermalhydraulic processes in a natural circulation steam boiler loop is presented. Digital simulation has been performed in order to predict open loop transients in severe accidental situations. Parts of the circulation loop such as the steam drum, downcomer, and riser were modelled separately on the basis of the integral balance equations. The two-phase flow in the steam drum and in the riser was modelled with the aid of a homogeneous-equilibrium, two-phase flow model. Special care was taken to ensure the stability of the numerical scheme, …

Observation Of The Visible Absorption Spectrum Of H2o+, Biswajit Das, John W. Farley

Electrical & Computer Engineering Faculty Research

The Ã ² Ã₁–X̃ ² B̃₁ system of H₂O⁺ has been observed, using laser absorption spectroscopy in a velocity‐modulated discharge. A total of 78 transitions between 14 794 and 15 475 cm⁻¹ have been observed with an uncertainty (1 SD) of 0.02 cm⁻¹, including 76 transitions in the (0,7,0)–(0,0,0) band and 2 in the (0,8,0)–(0,0,0) band. This species is important for cometary astronomy, and intriguing for molecular physics because of its prominent Renner–Teller interaction. Careful measurements were made of the relative intensities of the absorption lines, …

The Energy Needs Of The Developing Countries, Vaman Rao

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The energy needs of the developing countries are enormous. They will grow with the passage of time as the pace of economic development accelerates and those countries enter the industrial epoch. The sheer physical non-availability of coal and petroleum to most of them makes it obligatory to choose an unconventional resource as an energy-base. The nuclear fission is the only option now available which is feasible, less-expensive and plentiful. Solar and fusion may be the ultimate sources in the steady state, when appropriate technologies are developed.

4th Annual Umr-Dnr Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

Energy Conservation In Uniroyal, Inc., John C. Madigan

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

In the last year, rapid developments have led to the establishment of industry conservation goals and monitoring by the Department of Commerce and the Federal Energy Administration via the various industry associations.

Since 1972, Uniroyal has progressed more than half way toward the 1980 goal of 15% established for the rubber and chemical industries. This paper will describe details of the program with emphasis on new input, such as the computerized tracking method now in use.

Plant studies have provided an assessment of "base" loads vs. process loads, important when considering unit energy consumption. These vary, particularly with the climate …

The Energy Conservation Implications Of Master Metering Of Electric Service In Apartments, Gordon Gross

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A study has been made of the difference in electricity usage between residents of "Electricity included" apartments and those tenants who pay individual "light bills." The factors which influence owners' and builders' choices of metering service are discussed in detail.

Data taken from over 100 apartment buildings or complexes in 10 major U.S. metropolitan areas and from over 50 major electric power companies are used as the basis for the reported results. Contractors estimates of the costs to convert building service from master to individual meter and some bases for these costs are presented.

The energy conservation potential which might …

Energy Conservation Program At Ralston Purina, George A. Bossman

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

While the food industry as a whole uses only about 5 per cent of total manufacturing energy, we at Ralston Purina Company recognize our dependence upon energy and the importance of a strong energy management program. Last year, as part of this program, we established and implemented an energy conservation program designed to identify opportunities for conservation.

The major thrust of this program has been directed at manufacturing facilities where usages can be traced, wastes detected, and appropriate action taken. These are separate from a general overall corporate effort to make employees more energy conscious in every phase of their …

Energy Management In The Food Store, Paul Adams

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Food store refrigeration is vital to the food distribution system and consumes much of the energy used in a supermarket. The manufacturers of food store display equipment have worked long and hard to develop new ideas in supermarket energy conservation. Hussmann's studies have uncovered a number of facts invaluable to anyone concerned with energy conservation in the supermarket.

The first fact is to realize that supermarkets are different from any other retail stores. They consume more energy each year per sq. ft. of store - or per customer - or per dollar sales than other retail stores and most commercial …

Osmo - Power. Osmotic Work; Energy Production From Osmosis Of Fresh Water/Sea-Water Systems, H. H. G. Jellinek

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

It is imperative that new and ecologically acceptable energy sources are made available. Solar energy is a source which seems to be inexhaustible and free of pollution hazards. One vast source, which can be considered to be a solar energy source consists of the system fresh water/sea water. Fresh water is continually removed by the hydrological cycle where water evaporates from the ocean due to solar radiation and is eventually precipitated again in the form of fresh water feeding various rivers. Fresh water and ocean (salt) water mix when rivers flow into the oceans. The different chemical potentials are equalized …

Lean Burning Spark-Ignition Engines -- An Overview, J. A. Alic

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Means of improving the thermal efficiency of spark-ignition internal combustion engines through fuel-lean combustion at part-load are discussed. For purposes of comparison and evaluation, lean-burning engines are classified as modified conventional engines, stratified charge engines, and engines using alternative fuels. Particular attention is given to automobile applications because of their importance for conservation of fuels.

Efficiency In The Use Of Energy Has Been Effected Through Industrial Use Of Subsurface Space, Truman Stauffer Sr.

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Our Nation, with its high standard of living made possible by industrialization, draws heavily on energy producing natural resources. Self reliance mandates the use of every measure of conservation in order to extend the yet finite supply of energy to meet our national needs. Efficiency in the use of energy has been and can increasingly be effected through industrial use of subsurface space. The use of mined rooms for industry and warehousing utilizes the natural stable underground temperature and the low coefficient of heat transfer existing naturally in the lithosperic materials of the subsurface environment. The small amount of energy …

A Vehicle For Improving Energy Management For Business And Industry, Herbert M. Eckerlin, Albert S. Boyers

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A new technical assistance program focusing on the area of energy management has been developed by North Carolina State University for business and industry. This paper describes the operation of the program and presents some typical recommendations made to industry. The impact of the energy crisis on small industry is discussed and future plans for addressing this problem are presented.

Alternative Approaches To Energy Modeling, Alan S. Cohen, Kenneth W. Costello

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The effects of government and private sector energy policies are varied and interrelated. Before implementing research and development programs, new technologies, environmental and price regulations, import quotas, and other energy-related policies, the consequences of these programs must be identified and quantified on a regional basis. To evaluate the regional impacts of energy policies, we need to consider production costs, transportation costs, and the location of reserves, as well as the demands for energy and nonenergy goods. Developing techniques for analyzing these factors was the objective of many previous research efforts. The strengths and weaknesses of the resulting models are discussed …

Ways To Reduce Peak Electrical Demand In South Louisiana, S. J. Gold, M. D. Bakewell, G. E. Guidry, E. F. Lewis, L. J. Naquin, B. P. Whitney

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This study analyses alternatives for coping with the peak electrical demand of hot summer afternoons. Economic and Political aspects, as well as technical feasibility, are included. It is concluded that South Louisiana may indeed be able to trim peak demand to 5% below what is anticipated by 1980 , thus making one of the coal fired stations scheduled then unnecessary. However, the contingencies (Natural Gas Shortage, Another Oil Embargo) would make a coal-fired station very desirable.

The Impact Of Direct Coupling Of Solar Cell Arrays To Electric Power Networks, Adel H. Eltimsahy, Fernando L. Alvarado, Thomas W. Boyd

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper has to do with a preliminary investigation of the economic impact of solar cells when directly coupled to a conventional three-phase power network in the Toledo area.

A correlation is established between power system demand curves and solar insolation data in the Toledo area using computer simulation. The correlation studies determine how successfully solar cell/inverter systems can alleviate the power system demand during peak hours. They also show how much solar cell area will be needed to cause a significant impact on the power generating system.

Using computer simulation the initial cost of the solar cell/inverter is compared …

Choosing Alternative Energy Systems Under Conditions Of Uncertainty, Dennis Costello

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A methodology for simulating the decision process of an investor deciding between alternative energy systems is presented. The approach assumes the investor bases his decision on cost (or rate of return) and risk. Risk is treated directly in the model and not reduced to a certainty equivalent. The rate of return-risk characteristics of many system combinations allows them to be eliminated as viable choices to the investor without reference to his personal attitude toward risk.

Energy Conservation At Monsanto, Ray E. Doerr

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

We at Monsanto want to thank you for the opportunity to tell you about our energy conservation program. We are proud of our accomplishments to date, and are very optimistic regarding plans for the future in energy conservation.

Through our five operating companies and supported by corporate departments, Monsanto directs the conservation efforts at 50 locations in the United States.

We also have a very active conservation program in Canada and Europe.

Oil Shale R & D -- A Bureau Of Mines Program, Steve Utter

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Energy is one of our basic natural resources. Oil constitutes an important part of this resource but domestic production is dropping while imports are rising. Today, oil represents about one-half of the total energy consumed in this country, and demand is expected to grow at the rate of about 2 percent per year during the next 10 years. Increased reliance on imports can be reduced by synthetic fuels produced from the oil shale deposits of the Green River Formation in Colorado, Utah, and Wyoming. These deposits are so enormous (600 billion barrels in high- grade shale alone), that any limitations …

Inexpensive Inertial Energy Storage Utilizing Homopolar Motor-Generators, W. F. Weldon, H. H. Woodson, H. G. Rylander, M. D. Driga

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The pulsed power demands of the current generation of controlled thermonuclear fusion experiments have prompted a great interest in reliable, low cost, pulsed power systems. The Energy Storage Group at the University of Texas at Austin was created in response to this need and has worked for the past three years in developing inertial energy storage systems. 0.5 and 5 megajoule homopolar motor-generators have been designed, built and tested at the University of Texas and design studies have been completed for several systems ranging in size up to 63 gigajoules. The performance of the two laboratory machines and the potential …

Storage Of Spent Fuel From Light Water Reactors, W. C. Wolkenhauer

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The effects of possible inadequate nuclear fuel reprocessing capability upon a public utility, Washington Public Power Supply System, are studied. The possible alternatives for storing spent fuel are reviewed.

The Design And Application Of Induction Motors For Efficient Energy Utilization, Paul K. Lindhorst

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The various means for increasing electric motor efficiency and power factor are presented from the design and application points of view. Various design options are explored using computer aided design procedures. Motor characteristics are reviewed with the intent of maximizing efficiency through proper application. A thorough study of the economics of higher efficiency motors is presented showing payback to the user in terms of energy cost savings and payback of the increased energy required to produce the higher efficiency motors.

Self-Consistency In Estimating Future Electrical Energy Consumption, W. D. Devine Jr., C. C. Calligan, O. D. Osborne

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A socio economic computer simulation model for the State of Oregon is described. The Oregon State Simulation Model (OSSIM) includes a thirty-seven sector model of electrical energy consumption. Coupling between this model and the OSSIM ensures self-consistent scenarios of socio economic phenomena which underlie energy consumption. One of the purposes of this effort is to help state-level decision makers understand the determinants of electricity consumption within a context of changing economic conditions.

Evaluating The Total Cost Of An On-Site Solar Energy System, Dennis Costello, Jerry Bradley

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A methodology for evaluating the total or life-cycle cost of an on-site solar energy system is presented. The costs represent after-tax or effective costs realized by the owner of the energy system. The methodology addresses: (1) capital costs; (2) fuel costs; (3) maintenance and operating costs; (4) property taxes; (5) the tax benefits of depreciation; and (6) the investment tax credit. The model was developed for evaluating solar energy systems located at the point where the energy is demanded. However, the methodology also has applicability to many other types of energy systems.