Nanoscience and Nanotechnology Commons^™

Colloidal Quantum Dots: A Path Toward Making Mid-Wave Infrared Sensing A Ubiquitous Technology, Mohammad Mostafa Al Mahfuz

Dissertations

Reducing the size, weight, power consumption, and cost (SWaP-C) of infrared detectors could make infrared sensing more widely accessible. In the critical mid-wavelength infrared (MWIR) spectral range of 3-5 gm, commercially available detectors are limited by the high costs associated with epitaxial growth and hybridization, as well as the need for cryogenic cooling. These factors restrict their use to defense and space applications.

Colloidal quantum dots present a promising material for overcoming these challenges, with wafer-scale monolithic integration and Auger suppression being the key material capabilities to minimize the sensor's SWaP-C. Infrared sensors based on colloidal quantum dots have been …

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen

Journal of Electrochemistry

Polymeric perylene diimide (PDI) has been evidenced as a good candidate for photocatalytic water oxidation, yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration. Herein, with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern, the electronic structure is theoretically illustrated by the first-principles density functional theory calculations, suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI. It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal …

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu

Journal of Electrochemistry

The sodium-iodine (Na-I) battery exhibits significant potential as an alternative energy storage device to the lithium-ion battery. However, its development is hindered by inadequate electrical and thermal stability, as well as the dissolution and shuttling of polyiodide. In this study, we report a preparation method for melamine carbon sponge (MC) via carbonizing a commercially available kitchen sponge. It was revealed that the as-prepared MC, composed of unique self-growing carbon nanotubes, could provide both physical and chemical adsorption capabilities for intermediate polyiodides to improve the electrochemical performance of NaI. Consequently, the NaI/MC electrode effectively minimized polyiodide dissolution and reduced the electrochemical …

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

The Antioxidant Potential Of Rosemary Leaf-Derived Nanovesicles, Shani Akila Griffin

Master's Theses

Human dermal fibroblasts are essential for maintaining skin homeostasis. However, exposure to exogenous and endogenous stressors can lead to fibroblast instability, extracellular matrix degradation, and excessive reactive oxygen species (ROS) production. These factors contribute to skin aging and ROS-induced skin disorders leading to hair loss. Adverse effects from synthetic treatments have driven interest in natural alternatives like plant extracts for skin therapy. However, the polyphenols in these treatments require an effective delivery system to ensure their stability and targeted application. Plant derived nanovesicles (PDNVs) are emerging as a promising natural alternative for therapeutic applications. Their biocompatibility, stability, and encapsulated compounds …

Encryption With Synchronized Chaos Using Fabricated Cobalt Ferrite Memristors, Kiran Sai Seetala

Doctoral Dissertations

No abstract provided.

Functional Devices Based On Freestanding 2d Materials, Shijue Xu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Two-dimensional (2D) materials have attracted extensive attention in the field of nanoelectronics due to their atomic-scale thickness, high surface-to-volume ratio, tunable electronic properties, and compatibility with low-temperature processing. These characteristics make them highly suitable for the construction of emerging device architectures, particularly in both ionic and electronic devices.

In this work, we investigate the application of 2D materials in two distinct classes of devices: ionically-driven memristors and electronically-dominated metal–semiconductor contacts. For the memristor study, we fabricate heterostructure-based resistive switching devices using h-BN and WSe₂ as active layers. These 2D material-based memristors exhibit stable power consumption loops and high linearity …

Exploring Metal Additive Manufacturing In Martian Atmospheric Environments, Zane Mebruer

Mechanical Engineering Undergraduate Honors Theses

On-surface manufacturing is key to the success of a planetary colonization, especially that of Mars. However, traditional subtractive manufacturing processes are equipment, energy, and material intensive, meaning novel additive manufacturing (AM) processes must be pursued for this end. Selective laser melting, one of the most effective and versatile AM methods, would be incredibly beneficial to a Martian mission but requires an artificial argon atmosphere to create effective parts. The purpose of this study was to examine if carbon dioxide, the gas that makes up over 95% of Mars’ surface atmosphere, would be a sufficient substitute for argon in SLM fabrication. …

Mechanistic Insights Into Polymer-Assisted Graphene Exfoliation: The Roles Of Velocity, Adhesion, Cohesion, Temperature, Peeling Mode, And Edge Defect Via Coarse-Grained Molecular Dynamics, Linjiale Dai

All Theses

Graphene exfoliation is a critical step in the fabrication of high-quality graphene

layers. However, the underlying fracture mechanisms remain poorly understood. In this

work, I employed coarse-grained (CG) molecular dynamics (MD) simulations to

investigate how factors such as interfacial binding energy, substrate cohesion, temperature,

peeling mode, and edge defects influence the outcome of the exfoliation process. To model

polymer-assisted mechanical exfoliation, I used a finite-size system in which multilayer

graphene (MLG) is sandwiched between two thin polymer films. Leveraging the

spatiotemporal efficiency of the CG model, I performed fifty simulation iterations per

parameter set and analyzed the results from a …

Variation Of Membrane Electrode Assembly Catalyst Layer In Unitized Regenerative Fuel Cell, Yollanda Nurcholifah, Dedi Rohendi, Edy Herianto Majlan, Nirwan Syarif, Addy Rachmat, Dwi Hawa Yulianti, Nyimas Febrika S

Journal of Electrochemistry

A unitized regenerative fuel cell (URFC) is a device that may function reversibly as either a fuel cell (FC) or water electrolysis (WE). An important component of this device is the Membrane electrode assembly (MEA). Therefore, this study aimed to compare the performance outcomes of MEA using electrodes with single and three catalyst layers. This study measured Electrochemical Surface Area (ECSA), Electrochemical Impedance Spectroscopy (EIS), X-ray Diffraction analysis (XRD), and X-ray Fluorescence (XRF). Furthermore, the round-trip efficiency (RTE) of the MEA, as well as the performance in FC and WE mode, was measured. In comparison, The ECSA values of Pt-Ru/C …

Electrocatalytic Nitric Oxide Reduction To Yield Ammonia Over Fe3C Nanocrystals, Sen Lin, Lang Zhang, Tong Hou, Jun-Yang Ding, Zi-Mo Peng, Yi-Fan Liu, Xi-Jun Liu

Journal of Electrochemistry

Nitric oxide (NO), which generally originates from vehicle exhaust and industrial flue gases, is one of the most serious air pollutants. In this case, the electrochemical NO reduction reaction (NORR) not only removes the atmospheric pollutant NO but also produces valuable NH₃. Hence, through the synthesis and modification of Fe₃C nanocrystal catalysts, the as-obtained optimal sample of Fe₃C/C-900 was adopted as NORR catalyst at ambient conditions. As a result, the Fe₃C/C-900 catalyst showed an NH₃ Faraday efficiency of 76.5% and an NH₃ yield rate of 177.5 μmol·h^–1·cm^{–2 …}

Ordering Degree Regulation Of Pt2Nico Intermetallics For Efficient Oxygen Reduction Reaction, Chen-Hao Zhang, Han-Yu Hua, Jun-Hao Yang, Qian Zhang, Chang Yang, De-Li Wang

Journal of Electrochemistry

Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction (ORR). Atomic ordered intermetallic compounds (IMC) provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms, thus exhibiting superior electrocatalytic activity and durability. However, quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging. Herein, a series of ternary Pt₂NiCo intermetallic catalysts (o-Pt₂NiCo) with different ordering degree were synthesized by annealing temperature modulation. Among them, the o-Pt …

Performance Of Co2/H2O Co-Electrolysis In A Flat-Tube Solid Oxide Electrolysis Cell Stack Under Air-Free Environment, Xiao-Hui Zhong, Fei Wang, An-Qi Wu, Bei-Bei Han, Jian-Xin Wang, Wan-Bing Guan

Journal of Electrochemistry

This work investigates the transient performance and stability of CO₂/H₂O co-electrolysis in an air-free environment using a flat-tube solid oxide electrolysis cell (SOEC) stack. The results show that the transient behavior of the stack with and without blowing gas in the air electrode is almost the same. With a current density of 0.67 A·cm⁻²@750 °C, the stack operated for over 200 h under co-electrolysis conditions with no air blowing, and the voltage drop rate of the stack was approximately 0.203%/100 hours. Microstructure analysis reveals significant loss of Ni particles and formation of an insulating …

82 - Characterization Of Manganese Ferrites For Combined Mph/Mpi Treatments, Alana Canty, Robert Ivkov, Hayden Carlton

Undergraduate Research Symposium

Magnetic particle hyperthermia (MPH) is a form of cancer treatment in which cancer cells are made more susceptible to treatments, primarily radiation, through heating. The heat is generated from exciting magnetic nanoparticles (MNPs) within an alternating magnetic field (AMF)—nanoparticles which have been injected into a tumor—and both the heating quality and imaging quality of these MNPs are determined by their magnetic properties, with the primary one being anisotropy. Magnetic nanoparticles have been introduced as both a treatment option as well as a diagnostic tool through magnetic particle imaging (MPI). When used as a diagnostic tool, MNPs act as tracers to …

Josephson Junctions: Fabrication And Applications For The Axion Dark Matter Experiment, Jonah M. Sachs

Senior Honors Papers / Undergraduate Theses

The observation of axions could revolutionize the world of physics. Through microwave frequency cavity readout of the photons associated with these axions, the ADMX project at WashU utilizes multiple different forms of the Josephson junction (JJ), a superconductive circuit element. The physics behind the JJ are essential to understanding its operation for resonant cavity readout in addition to parametric amplification. Parametric amplifiers produced using JJs can approach the signal-to-noise ratio set by quantum mechanics, and prove essential for the amplification chain used by the ADMX experiment for axionic detection. The limits of these amplifiers are set by the noise tuning …

Development Of Highly Sensitive & Selective Sensor, Megha Shinde

Biomedical Engineering Theses & Dissertations

This work presents the development of innovative electrochemical sensors for selective and sensitive dopamine (DA) detection using flexible laser-induced graphene (LIG) electrodes modified with advanced nanocomposites. An LIG electrode synthesized from pyralux film was functionalized with Nb₄C₃Tx MXene and silver nanoparticles (AgNPs), significantly enhancing its electrochemical performance. The modified electrode exhibited a peak anodic current increase from 150 μA to 330.4 μA and demonstrated a wide linear detection range (100 nM to 10 μM) with a low detection limit of 1 nM and high sensitivity (160.96 μA/nM cm ^-2). It also displayed excellent selectivity against …

Development Of Flexible Lactate-Specific Molecularly Imprinted Polymers Based On Laser-Induced Graphene Electrochemical Biosensors For Disease Diagnosis, Christopher Animashaun

Biomedical Engineering Theses & Dissertations

Lactate is a critical biomarker linked to conditions such as sepsis, ischemia, cancer, and heart failure. Current lactate detection methods remain invasive, costly, and unsuitable for real-time, continuous monitoring. This study presents the development of a flexible, non-enzymatic electrochemical biosensor based on laser-induced graphene (LIG) electrodes modified with gold nanoparticles (AuNPs) and molecularly imprinted polymers (MIPs) for highly selective and sensitive lactate measurement. The integration of AuNPs enhanced surface conductivity and provided nanoscale heterogeneity, facilitating superior signal amplification. The optimized LIG/AuNP/MIP sensor achieved an extensive dynamic detection range from 0.1 μM to 1000 μM, with an outstanding detection limit of …

Nanosecond Pulsed Electric Field And Plasma Jets For Cancer Therapy, Edwin Ayobami Oshin

Biomedical Engineering Theses & Dissertations

Nanosecond pulsed electric field (nsPEF) employs nanosecond-duration, high voltage pulses to induce oxidative stress, leading to temporary or permanent damage to cells or tissue (also known as reversible and irreversible electroporation), and has been considered a promising approach for cancer therapy. In parallel to this, nanosecond pulsed atmospheric pressure plasma jets (ns-APPJs) have also shown to be effective in inactivating cancer cells or increasing sensitivity of cells to electric fields. ns-APPJs are known to generate reactive chemical agents, including reactive oxygen and nitrogen species (RONS) which induces oxidative stress resulting in cell proliferation, apoptosis, and necrosis. In this dissertation, a …

Revolutionizing Medical Implant Fabrication: Advances In Additive Manufacturing Of Biomedical Metals, Yuhua Li, Deyu Jiang, Rui Zhu, Chengliang Yang, Liqiang Wang, Lai Chang Zhang

Research outputs 2022 to 2026

Additive manufacturing has emerged as a transformative technology for producing biomedical metals and implants, offering the potential to revolutionize patient care and treatment outcomes. This article reviews the recent advances in additive manufacturing (AM) of biomedical metal implants, especially load-bearing biomedical alloys, biodegradable alloys, novel metals, and 4D printing, whose properties are systematically assessed to facilitate material selection for specific medical applications. The applications of the most cutting-edge artificial intelligence in AM and surface functional modification are also presented. This article also explores the application of AM in various medical specialties, such as orthopedics, dentistry, cardiology, and neurosurgery, demonstrating its …

Exploring The Impact Of Multiwall Carbon Nanotubes On Enhancing Water-Based Mud Performance, Attia Attia, Mohamed Saad Elhossieny Dr., Hesham Abuseda Dr., Ahmed Gouish Prof., Adel Salem Prof.

Petroleum Engineering and Gas

Drilling fluids are critical components in hydrocarbon and geothermal well construction, particularly in extreme downhole environments such as deep reservoirs and high-temperature geothermal systems. Key challenges in designing water-based drilling muds (WBDM) for these applications include effective thermal management, maintenance of rheological stability, and enhancement of thermal conductivity under high-temperature, high-pressure (HTHP) conditions. Recent advances in nanotechnology suggest that nanoscale additives, such as uniformly dispersed carbon nanotubes (CNTs), can significantly improve the thermorheological performance of drilling fluids compared to conventional formulations. However, stabilizing critical fluid properties—including viscosity, filtration efficiency, mud cake integrity, and gel strength—remains a persistent challenge in WBDM …

Study On Dopamine Electrochemical Sensing Based On Au@Mos2, Ning An, Ni Su, Xin-Ran Li, Jian-Yu Liu, Qi-Yan Wang

Journal of Electrochemistry

Dopamine (DA) is a vital neurotransmitter, and accurate detection of its concentration is critical for both clinical diagnostics and neuroscience research. Due to its electrochemical activity, DA is commonly detected using electrochemical methods, which are favored for their simplicity, fast response time, and suitability for in vivo analysis. In this work, a highly sensitive DA electrochemical sensor was developed using an Au@MoS₂ composite, created by modifying molybdenum disulfide (MoS₂) nanosheets with gold nanoparticles through HAuCl₄ reduction, and it was aimed at enhancing DA adsorption and improving detection performance. Scanning Electron Microscopy (SEM), transmission electron microscopy (TEM), …

Recent Advances In Non-Enzymatic Electrochemical Sensors For Theophylline Detection, Gustria Ernis, Yulia M T A Putri, Muhammad Iqbal Syauqi, Prastika Krisma Jiwanti, Yeni Wahyuni Hartati, Takeshi Kondo, Qonita Kurnia Anjani, Jarnuzi Gunlazuardi

Journal of Electrochemistry

Detection of target analytes at low concentrations is significant in various fields, including pharmaceuticals, healthcare, and environmental protection. Theophylline (TP), a natural alkaloid used as a bronchodilator to treat respiratory disorders such as asthma, bronchitis, and emphysema, has a narrow therapeutic window with a safe plasma concentration ranging from 55.5–111.0 μmol·L^–1 in adults. Accurate monitoring of TP levels is essential because too low or too high can cause serious side effects. In this regard, non-enzymatic electrochemical sensors offer a practical solution with rapidity, portability, and high sensitivity. This article aims to provide a comprehensive review of the recent developments …

In-Situ Electrodeposition Of Feco-Mof On Au Ultramicroelectrode For Highly Sensitive Detection Of Epinephrine, Yan Chen, Shang Jian, Si-Yu Wan, Xiao-Tong Cui, Zhong-Gang Liu, Zheng Guo

Journal of Electrochemistry

Metal-organic framework (MOF) nanostructures have emerged as a prominent class of materials in the advancement of electrochemical sensors. The rational design of bimetallic MOF-functionalized microelectrode is of importance for improving the electrochemical performance but still in great challenge. In this work, the bimetallic FeCo-MOF nanostructures were assembled onto a gold disk ultramicroelectrode (Au UME, 5.2 μm in diameter) via an in-situ electrodeposition method, which enhanced the sensitive detection of epinephrine (EP). The in-situ electrodeposited FeCo-MOF exhibited a characteristic nanoflower-like morphology and was uniformly dispersed on the Au UME. The FeCo-MOF/Au UME demonstrated excellent electrochemical performance on the detection of EP …

Investigating Spatial Mapping Of Lipid And Protein Alterations Within Cells And Tissues Using Raman Microspectroscopy, Elnaz Sheikh

LSU Doctoral Dissertations

The progression of various diseases is associated with alterations in the microenvironment of cells, consisting of a variety of metabolites like lipids and proteins. It is well known that lipids and proteins are potential biomarkers for indicating alterations within the cell microenvironment induced by disease, and various methods are frequently used for their examination. To understand the chemical composition and spatial distribution of constituents in tissues and cells, confocal Raman spectroscopy and microscopy, as non-destructive tools, have shown potential for monitoring abnormalities at the cellular level with high resolution and can facilitate detection through targeting multiple biomarkers. The application of …

Synthesis, Characterization And Electrical Properties Evaluation Of Zirconium Dioxide Capacitors, Thomas P. Chandy

USF Tampa Graduate Theses and Dissertations

This thesis focuses on the fabrication and comprehensive characterization of thin-film capacitors utilizing zirconium dioxide (ZrO2) as the dielectric material, placed between aluminum electrodes. The research primarily aims to examine the impact of varying ZrO2 film thickness and the effects of post-deposition annealing on the structural, morphological, and electrical properties of the capacitors. A controlled sputtering deposition technique was employed to ensure uniform film growth, maintaining consistency in thickness and material quality across all samples.

A comprehensive set of characterization techniques was employed to analyze the capacitors. Scanning electron microscope (SEM) was used to assess surface roughness, revealing fewer defects …

Synthesis, Characterization And Delamination Studies Of Metallic Thin Films Prepared Using Sputtering And Ebeam Evaporation Methods, Anoop Joseph

USF Tampa Graduate Theses and Dissertations

In many mechanical applications, including the manufacturing, automotive, and cutting tool sectors, metallic thin film coatings are crucial due to their tribological and protective properties. This research focuses on the development of metallic thin films of Aluminum (Al), Chromium (Cr) and Titanium (Ti) using deposition techniques like Sputtering and Electron Beam Evaporation. Metallic thin films were fabricated, with variations in thickness for each material, allowing for an in-depth study of the effects of Sputtering and Ebeam Evaporation deposition method on film characteristics. The thickness of these metallic thin films were evaluated using High-Resolution Scanning Electron Microscopy (HRSEM) and Profilometer while …

Analytical Electrochemistry Of Nickel, Platinum, And Platinum-Nickel Electrodepositions, Kyle James Troche

Nanoscience and Microsystems ETDs

Nickel and platinum electrodeposits have numerous applications in corrosion and wear-resistant coatings, electronic connectors, heat resistance, metal finishings, and catalysts. The addition of additives can vastly change the morphology of the deposition. Electrokinetic parameters can be calculated by conducting rotating disk electrode (RDE) experiments along with Koutecky-Levich analysis. Significant challenges need to be addressed to deposit uniform films of Pt-Ni alloys from a single co-deposition bath. The main challenge is platinum’s catalytic property to reduce the overpotential for the hydrogen generation reaction. An Investigation into methanol and carbon monoxide’s hydrogen generation reaction suppression was conducted. Electrodeposition of nickel, platinum, and …

Plasmonic Enhancement Of Photothermal Conversion Efficiency In Gold-Nanoparticle Hydrogels, Mai S. Rashwan, Abed M. Al-Sheikh, Harihara Baskaran, Clemens Burda

Faculty Scholarship

This study investigates the photothermal properties of citrate-capped gold nanoparticles (Au NPs) dispersed in agarose gel, examining various sizes and concentrations, particularly within a low-concentration range (0.2–2.5 nM). Heat transfer measurements are conducted on Au NP hydrogels using laser-light induced heating, revealing a size- and concentration-dependent temperature increase compared to the plain agarose gel matrix. Experimental data, combined with finite-element analysis, demonstrate that photothermal energy conversion efficiencies are dependent on NP size and concentration, while the thermal conductivity (TC) of all Au NP hydrogels remains constant and independent of these parameters within the tested concentration range. UV-visible spectroscopy indicates that …

Experimental Study For Improving Oil Recovery Using Organic Alkaline And Nano-Silica For An Egyptian Oil Field, Attia Attia, Mohamed Sadek Hamedi Al, Mayar Abdelrahman Hassan Eng.

Petroleum Engineering and Gas

The oil and gas industry continually seeks innovative methods to enhance hydrocarbon recovery due to the declining productivity of conventional techniques. Current recovery methods, such as water flooding and chemical flooding, often face limitations like high interfacial tension, unfavorable wettability, and reduced mobility of oil, especially under harsh reservoir conditions of high salinity. To address these challenges, this study explores the implementation of nanotechnology in enhanced oil recovery (EOR), focusing on the distinct and unique properties of nanoparticles. Nanoparticles, particularly SiO2, were chosen for their ability to significantly decrease interfacial tension, alter wettability, and improve oil mobility. SiO2 nanoparticles exhibit …