Nanoscience and Nanotechnology Commons^™

Three-Dimensional Printing And Nanotechnology For Enhanced Implantable Materials, Karthik Kumar Tappa

Doctoral Dissertations

Orthopedic and oro-maxillofacial implants have revolutionized treatment of bone diseases and fractures. Currently available metallic implants have been in clinical use for more than 40 years and have proved medically efficacious. However, several drawbacks remain, such as excessive stiffness, accumulation of metal ions in surrounding tissue, growth restriction, required removal/revision surgery, inability to carry drugs, and susceptibility to infection. The need for additional revision surgery increases financial costs and prolongs recovery time for patients. These metallic implants are bulk manufactured and often do not meet patient's requirements. A surgeon must machine (cut, weld, trim or drill holes) them in order …

Immobilization Of Cellulase For Large Scale Reactors To Reduce Cellulosic Ethanol Cost, Dezhi Zhang

Doctoral Dissertations

Cellulosic ethanol is an alternative renewable energy source. Cellulase used in the production of cellulosic ethanol is very expensive. The difficulty in separating cellulase from the cellulose solution after the hydrolysis process limits the reusability of the cellulase, which highly precludes the scales of this application because of the high cost of the enzyme. Immobilization of cellulase provides a promising approach to allow the enzyme to be recycled, thus reducing the production cost. This research focused on immobilizing cellulase for reuse to reduce the cellulosic ethanol cost.

Four immobilization techniques were explored for the immobilization of cellulase on four different …

Enhanced Bioactive Scaffolds For Bone Tissue Regeneration, Sonali Karnik

Doctoral Dissertations

Bone injuries are commonly termed as fractures and they vary in their severity and causes. If the fracture is severe and there is loss of bone, implant surgery is prescribed. The response to the implant depends on the patient's physiology and implant material. Sometimes, the compromised physiology and undesired implant reactions lead to post-surgical complications. [4, 5, 20, 28] Efforts have been directed towards the development of efficient implant materials to tackle the problem of post-surgical implant failure. [ 15, 19, 24, 28, 32]

The field of tissue engineering and regenerative medicine involves the use of cells to form a …

Clay Nanotube Composites For Antibacterial Nanostructured Coatings, Christen J. Boyer

Doctoral Dissertations

A surging demand for the development of new antimicrobial nanomaterials exists due to the frequency of medical device-associated infections and the transfer of pathogens from highly touched objects. Naturally occurring halloysite clay nanotubes (HNTs) have shown to be ideal particles for polymer reinforcement, time-release drug delivery, nano-reactor synthesis, and as substrate material for nanostructured coatings.

This research demonstrates the feasibility of a novel method for coating HNTs with metals for antibacterial applications. The first ever ability to coat HNTs through electrolysis was developed for customizable and multi-functional antibacterial nanoparticle platforms. HNTs were investigated as substrate for the deposition of copper …

Energy Harvesting Using Photovoltaic And Betavoltaic Devices, Ashish Sharma

Doctoral Dissertations

There is an important need for improvement in both cost and efficiency of photovoltaic cells. For improved efficiency, a better understanding of solar cell performance is required. An analytical model of thin-film silicon solar cell, which can provide an intuitive understanding of the effect of illumination on its charge carriers and electric current, is proposed. The separate cases of homogeneous and inhomogeneous charge carrier generation rates across the device are investigated. This model also provides for the study of the charge carrier transport within the quasi-neutral and depletion regions of the device, which is of an importance for thin-film solar …

Tunable Controlled Release Of Molecular Species From Halloysite Nanotubes, Divya Narayan Elumalai

Doctoral Dissertations

Encouraged by potential applications in rust coatings, self-healing composites, selective delivery of drugs, and catalysis, the transport of molecular species through Halloysite nanotubes (HNTs), specifically the storage and controlled release of these molecules, has attracted strong interest in recent years. HNTs are a naturally occurring biocompatible nanomaterial that are abundantly and readily available. They are alumosilicate based tubular clay nanotubes with an inner lumen of 15 nm and a length of 600-900 nm. The size of the inner lumen of HNTs may be adjusted by etching. The lumen can be loaded with functional agents like antioxidants, anticorrosion agents, flame-retardant agents, …

Manufacturing Polyacrylonitrile Nanowires And Nanofibers For Sensing And Energy Storage Applications, Juan Chen

Doctoral Dissertations

A novel flow guided assembly approach is presented to well align and accurately position nanowire arrays in pre-defined locations with high throughput and large scale manufacturing capability. In this approach, polyacrylonitrile (PAN)/N, N-dimethylformamide (DMF) solution is first filled in an array of microfluidic channels. Then a gas flow is introduced to blow out most solutions while pushing a little leftover against the channel wall to assemble into polymer nanowires. In this way, highly-ordered nanowires are conveniently aligned in the flow direction and patterned along both sides of the microchannels. In this study, we demonstrated this flow-guided assembly process by producing …

Impedance Characterization Of Ysz Based Nox Sensors, Ling Cui

Doctoral Dissertations

Yttria-stabilized zirconia has been utilized as an electrolyte of SOFC (Solid Oxide Fuel Cell) studies for years. It is also preferred as the electrolyte for solid state electrochemical sensor which is able to measure nitrogen oxides in the exhaust system. Electrochemical Impedance Spectroscopy method yields the change in impedance which is caused by an electron exchange of NO x gases at the sensing electrodes. From the EIS data, the fractional change in the phase angle is calculated for detecting sensor sensitivity.

Considering the fabrication of a sensor, several variables have been investigated which include the choice of electrolyte processing, sensing …

Size Specific Transfection To Mammalian Cells By Micropillar Array Electroporation, Yingbo Zu

Doctoral Dissertations

Electroporation serves as a promising non-viral gene delivery approach, while its current configurations carry drawbacks associated with high-voltage electrical pulses and heterogeneous treatment on individual cells. Here, we developed a new micropillar array electroporation (MAE) platform to advance the delivery of plasmid DNA and RNA to mammalian cells. By introducing well-patterned micropillar array on the electrode surface, the number of pillars each cell faces varies with its cell membrane surface area, despite their large population and random locations. In this way, cell size specific electroporation is conveniently done and contributed to a 2.5~3 fold increase on plasmid DNA transfection and …

Single Particle-Inductively Coupled Plasma-Mass Spectrometry Technology Development For Metallic Nanoparticle Characterization In Complex Matrices, Yongbo Dan

Doctoral Dissertations

"As the rapid growing of nanotechnology, the release of engineered nanoparticles (ENPs) into the environment is inevitable. After entering the real environment, ENPs tend to react with different components of the ecosystem (e.g. water, soil, air, plants) and make their characterization difficult. Analyzing ENPs in these complex matrices still remains as a grand challenge. ENPs characterization is normally the first step of risk assessment. Current analytical techniques have shown some limitations in revealing the unique characteristics of ENPs in complex matrices and reliable analytical techniques are in urgent need. Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) is an emerging …

Nanoformulation For Anticancer Drug Delivery: Enhanced Pharmacokinetics And Circulation, Gaurav Parekh

Doctoral Dissertations

In this study, we have explored the application of the Layer-by-Layer (LbL) assembly technique for improving injectable drug delivery systems of low soluble anticancer drugs (e.g. Camptothecin (CPT), Paclitaxel (PTX) or Doxorubicin (DOX)). For this study, a polyelectrolyte shell encapsulates different types of drug nanocores (e.g. soft core, nanomicelle or solid lipid nanocores).The low soluble drugs tend to crystallize and precipitate in an aqueous medium. This is the reason they cannot be injected and may have low concentrations and low circulation time in the blood. Even though these drugs when present in the cancer microenvironment have high anti-tumor inhibition, the …

Nanoenhanced Additive Manufacturing: Additive Introduction Onto Halloysite Nanotubes And Into 3d Printing Filament For Tailored Material Characteristics, James Connor Nicholson

Doctoral Dissertations

With the rapid advancement of additive manufacturing technologies in recent years on both the microscale and the macroscale, research must be done to test the limits of currently available technologies. On the microscale, halloysite nanotubes have proven to be a viable platform for reinforcement of polymers and time release of loaded chemicals, as well as a substrate material for the deposition of nanoparticles. The range of materials are limited due to polarity conflicts, and often lead to wet chemical processes that use more toxic alternatives. Three-dimensional (3D) printing and macroscale additive manufacturing techniques can be used to generate custom structures, …

Functional Clay Nanotubes And Composites, Yafei Zhao

Doctoral Dissertations

Tubular nanomaterials and their composites have been extensively studied in recent years in the fields of physics, chemistry, biology, and biomedicine. Carbon nanotube is the most commonly studied tubular nanomaterial; however, toxicity and high cost make it less attractive in industry and thus restricts its applications. Halloysite nanotubes, which are available in abundance in the United States as well as in other countries around the world, is a low-cost, unique and versatile aluminosilicate mineral with a chemical formula of Al4Si4O10(OH)8·nH2O. Basically, the halloysite tube diameter is around 50 nm and the length varies with different locations ranging from 0.4-1.5 μm. …

Improving Practices In Nanomedicine Through Near Real-Time Pharmacokinetic Analysis, Isidro B. Magana

Doctoral Dissertations

More than a decade into the development of gold nanoparticles, with multiple clinical trials underway, ongoing pre-clinical research continues towards better understanding in vivo interactions. The goal is treatment optimization through improved best practices. In an effort to collect information for healthcare providers enabling informed decisions in a relevant time frame, instrumentation for real-time plasma concentration (multi-wavelength photoplethysmography) and protocols for rapid elemental analysis (energy dispersive X-Ray fluorescence) of biopsied tumor tissue have been developed in a murine model. An initial analysis, designed to demonstrate the robust nature and utility of the techniques, revealed that area under the bioavailability curve …

The Synthesis And Characterization Of Water-Reducible Nanoscale Colloidal Unimolecular Polymer (Cup) Particles, Cynthia J. Riddles

Doctoral Dissertations

"The coatings industry has adapted to more stringent guidelines in paint formulations. Current VOC (volatile organic compound) limits placed by the federal government have pushed the industry toward the development of paint formulations which have very little to no VOC's. The development of Colloidal Unimolecular Polymer (CUP) particles is a step in the direction of providing a resin system which exists in zero VOC aqueous dispersion.

The CUP particles are a part of the polymer field of Single Chain Nano Particles (SCNP) and ranged in diameters of 3-9 nm. The research presented in this dissertation describes the synthesis and design …

Quartz-Mems: Wet Chemical Etching Assisted By Electromagnetic Energy Sources For The Development Of Quartz Crystal To Be Used For Microelectromechanical Systems, William J. Clower

Doctoral Dissertations

Quartz crystal resonators have been the most commonly used timing devices to date. Today's timing market requires devices to be as small as possible and consume smaller amounts of energy. Because of the market demand, many startup companies have formed to develop silicon resonators as timing devices. Silicon resonators have poor noise and temperature performance (due to its linear temperature versus frequency coefficient). At the moment the only advantage that silicon resonators have over quartz crystal resonators is a small form factor. The photolithography processing method currently being used in industry is a very tedious task, requiring multiple etching steps …

Computational Study Of Sodium Magnesium Hydride For Hydrogen Storage Applications, Fernando Antonio Soto Valle

Doctoral Dissertations

Hydrogen offers considerable potential benefits as an energy carrier. However, safe and convenient storage of hydrogen is one of the biggest challenges to be resolved in the near future. Sodium magnesium hydride (NaMgH 3) has attracted attention as a hydrogen storage material due to its light weight and high volumetric hydrogen density of 88 kg/m3. Despite the advantages, hydrogen release in this material occurs at approximately 670 K, which is well above the operable range for on-board hydrogen storage applications. In this regard, hydrogen release may be facilitated by substitution doping of transition-metals. This dissertation describes first-principles computational methods that …

Applications Of Halloysite Nanocontainers For Functional Protective Coating, Anupam Ramesh Joshi

Doctoral Dissertations

In this study we have explored the applications of halloysite clay nanotubes as a nanocontainer. Halloysite nanotubes are used as a storage unit for anticorrosion agents, flame retardants, and a dopant to extend the curing time for geopolymer composites. Halloysite is a naturally occurring clay mineral with a chemical formula of Al2Si2O 5(OH)4 · 2 H2O and is identical to kaolinite with the exception that it holds an additional water monolayer in its interlayered spaces. Upon heating at higher temperatures, halloysite loses the additional water monolayer, and this variant known colloquially as "meta-halloysite" has a chemical formula of Al2Si2O5(OH) 4 …

Nanotechnology And Additive Manufacturing Platforms For Clinical Medicine: An Investigation Of 3d Printing Bioactive Constructs And Halloysite Nanotubes For Drug Delivery And Biomaterials, Jeffery A. Weisman

Doctoral Dissertations

Personalized medicine requires the development of new technologies for controlled or targeted drug delivery. Three-dimensional (3D) printing and additive manufacturing techniques can be used to generate customized constructs for bioactive compound delivery. Nanotechnology in the form of nanoparticles, used as a stand-alone construct or for material enhancements, can significantly improve established biomaterials such as PMMA based bone cements or enable new technology to have enhanced capabilities. Combinations of the technologies can be used in such applications as infectious disease treatments, chemotherapeutic targeted drug delivery or targeted delivery of nearly any bioactive compound.

Chemotherapeutic or antibiotic enhanced 3D printing filaments were …

Hybrid Nanomaterial And Its Applications: Ir Sensing And Energy Harvesting, Yi-Hsuan Tseng

Doctoral Dissertations

In this dissertation, a hybrid nanomaterial, single-wall carbon nanotubes-copper sulfide nanoparticles (SWNTs-CuS NPs), was synthesized and its properties were analyzed. Due to its unique optical and thermal properties, the hybrid nanomaterial exhibited great potential for infrared (IR) sensing and energy harvesting.

The hybrid nanomaterial was synthesized with the non-covalent bond technique to functionalize the surface of the SWNTs and bind the CuS nanoparticles on the surface of the SWNTs. For testing and analyzing the hybrid nanomaterial, SWNTs-CuS nanoparticles were formed as a thin film structure using the vacuum filtration method. Two conductive wires were bound on the ends of the …

Thermoelectric Elisa For Quantification Of 8ohdg In A Microfluidic Device, Gergana Nestorova

Doctoral Dissertations

This research demonstrates the feasibility of a novel method for performing thermoelectric enzyme-linked immunosorbent assay (ELISA) in a microfluidic device. The feasibility of the thermoelectric ELISA is demonstrated by measuring the concentration of 8-hydroxy 2-deoxyguanosine (8OHdG) in urine samples from amyloid precursor protein (APP) transgenic mice. The detection method is based on formation of a complex between 8OHdG and anti-8OHdG capture antibody conjugated to biotin. The complex is immobilized over the measuring junctions of a thermopile via biotin streptavidin interaction. The concentration of the analyte is determined by using enzyme linked secondary IgG antibody specific to the primary one. The …

Nanostructured Aluminum Oxide (Nao): Enhanced Fluorescence Imaging And Sensing, Xiang Li

Doctoral Dissertations

A new fluorescence enhancement technical platform based on nanostructured aluminum oxide (NAO) has been discovered. Experiments reveal that this new platform can enhance the fluorescence signals up to two or three orders of magnitude compared to a traditional glass substrate platform. In order to realize a large-scale arrayed fluorescence biosensing platform for high throughput applications, a rapid and cost-effective process has been developed to fabricate the micropatterned NAO of a variety of shapes. An optical characterization technology, by introducing UV light irradiance, has been found for the first time to determine if the NAO has been formed from Al and …

Micro And Nano Technology Platforms: From Cell Viability Monitoring To Fet Based Biosensing, Pushparaj D. Pathak

Doctoral Dissertations

Nanotechnology is a multidisciplinary field that combines science and engineering to design, synthesize, characterize and explore applications for materials and devices whose smallest functional organization in at least one dimension is on the nanometer scale. Nanotechnology is undergoing an explosive development and the extent of potential application is vast and widely diverse. In the field of human health care, nanotechnology is helping to develop novel materials and structures, which have made it possible to miniaturize many of the tools used in conventional assays. Smart biochips constructed out of these novel materials and structures are now capable of performing limited in …

Study And Development Of Sulfated Zirconia Based Proton Exchange Fuel Cell Membranes, Brittany Wilson Kemp

Doctoral Dissertations

With the increasing consumption of energy, fuel cells are among the most promising alternatives to fossil fuels, provided some technical challenges are overcome. Proton exchange membrane fuel cells (PEMFCs) have been investigated and improvements have been made, but the problem with Nafion®, the main membrane for PEMFCs, has not been solved. Nafion® restricts the membranes from operating at higher temperatures, thus preventing them from working in small electronics. The problem is to develop a novel fuel cell membrane that performs comparably to Nafion® in PEMFCs.

The membranes were fabricated by applying sulfated zirconia, via template wetting, to porous alumina membranes. …

Selected Durability Studies Of Geopolymer Concrete With Respect To Carbonation, Elevated Temperature, And Microbial Induced Corrosion, Mohammad Sufian Badar

Doctoral Dissertations

This thesis reports a comprehensive study related to the experimental evaluation of carbonation in reinforced geopolymer concrete, the evaluation of geopolymer concretes at elevated temperature, and the resistance of geopolymer concrete to microbial induced corrosion (MIC).

Carbonation: Reinforced concretes, made of geopolymer, prepared from two class F fly ashes and one class C fly ash, were subjected to accelerated carbonation treatment for a period of 450 days. Electrochemical, microstructure and pore structure examinations were performed to evaluate the effect of corrosion caused due to carbonation. GPC specimens prepared from class F fly ash exhibited lower corrosion rates by a factor …

Development Of A Nitrogen Incorporated Ultrananocrystalline Diamond Film Based Field Emitter Array For A Flat Panel X-Ray Source, Chrystian Mauricio Posada

Doctoral Dissertations

"As an alternative to conventional X-ray sources, a flat panel transmission X-ray source is being developed. A field emitter array (FEA) prototype to be incorporated as cold cathode in this flat panel X-ray source was fabricated for this work. Using the Particle-in-Cell code OOPIC Pro, an initial FEA was designed through simulations. Based on the simulation results, a FEA prototype was fabricated using conventional microfabrication techniques. Planar nitrogen-incorporated ultrananocrystalline diamond (N-UNCD) films were used as field emitters. This N-UNCD based FEA prototype was composed of 9 pixels distributed in a 3x3 array, with a pixel size of 225x225 µm, and …

Micro Solar Thermal Energy Development And Use For Mems Power Applications, Emmanuel Ogbonnaya

Doctoral Dissertations

Increasing focus on alternative energy sources has produced significant progress across a wide variety of research areas. One particular area of interest has been solar energy. The sun represents sustainable and renewable energy source capable of meeting present energy needs without compromising the ability of future generations to meet theirs. Energy from the sun can be utilized in multiple ways. Direct rise in modern power generation typically involves either photovoltaic systems or large-scale solar thermal energy installations. While large-scale solar thermal energy generation is well advanced, there has been comparatively little research on smaller scale thermal energy collection and application. …

The Effect Of Network Transitions On Spontaneous Activity And Sycnhrony In Devloping Neural Networks, Jude P. J. Savarraj

Doctoral Dissertations

Connectivity patterns of developing neural circuits and the effects of its dynamics on network behavior, particularly the emergence of spontaneous activity and synchrony, are not clear. We attempt to quantify anatomical connectivity patterns of rat cortical cultures during different stages of development. By culturing the networks on dishes embedded with micro electrode arrays, we simultaneously record electrical activity from multiple regions of the developing network and monitor its electrical behavior, particularly its tendency to fire spontaneously and to synchronize under certain conditions. We investigate possible correlations between changes in the network connectivity patterns and spontaneous electrical activity and synchrony. Cocultures …

Intrinsic Mode Function Synchronization Measures For The Anticipation Of Seizures In Epilpsy, Daniel William Moller

Doctoral Dissertations

Epileptic seizures affect as many as 50 million people and often occur without warning or apparent provocation. We explore the applicability of noise-assisted Ensemble Empirical Mode Decomposition (EEMD) for patient-specific seizure anticipation synchronization measures as applied to the EEMD intrinsic mode function (IMF) output. Intracranial EEG data were obtained from pre-surgical monitoring at the Epilepsy Center of the University Hospital of Freiburg. Data from twenty patients were analyzed. For each recorded channel, non-overlapping time windows were submitted to the EEMD algorithm, producing twelve levels of IMFs. IMF synchronization measures (mean and maximum coherence, mean and maximum cross-correlation, correlation coefficient and …

Multi-Scale Characterization Of Nanostructured Sodium Aluminum Hydride, Shathabish Narasegowda

Doctoral Dissertations

Complex metal hydrides are the most promising candidate materials for onboard hydrogen storage. The practicality of this class of materials is counter-poised on three critical attributes: reversible hydrogen storage capacity, high hydrogen uptake/release kinetics, and favorable hydrogen uptake/release thermodynamics. While a majority of modern metallic hydrides that are being considered are those that meet the criteria of high theoretical storage capacity, the challenges lie in addressing poor kinetics, thermodynamics, and reversibility. One emerging strategy to resolve these issues is via nanostructuring or nano-confinement of complex hydrides. By down-sizing and scaffolding them to retain their nano-dimensions, these materials are expected to …